Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹46.6 L+₹1.8 L (3.90%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 3 | L3₹47.1 L+₹2.2 L (5.00%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L3 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 4 | L4₹47.5 L+₹2.6 L (5.86%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L4 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 5 | L5₹47.7 L+₹2.9 L (6.37%)Rejected-Finance | L5 | Rejected-Finance OTHER THEN LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
10 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
CERTAIN PROVISION/ADDN/ALTN WORKS AS A PROVN OF 01X TOILET BLOCK (02WC PLUS 02 BATHROOM) NEAR BLDG NO P-2 AT 20 MTN ARTY CAMP, PROVN OF HARD STANDING WITH GALVANIZE SHED ALONGWITH WASHING POINT AND NECESSARY E/M WORK OF STN HQ, ADDN/ALTN VISITOR ROOM
2022_MES_562877_1
8534/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMETS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹90,000
Yes
22 Dec 2022
12 Nov 2022
12 Dec 2022
12 Nov 2022
10 Dec 2022
26 Nov 2022
Amount
Schedule 'A'
M&L for Surface excavation n.exc (not exceeding) 7.50 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.
M&L for Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.
M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L for (Nominal Mix) (1:1.5:3) type B1 20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for (Nominal Mix) (1:1.5:3) type B1 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L for (Nominal Mix) (1:1.5:3) type B1 (20 mm graded aggregate) in covered slab/Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified.
M&L (Nominal Mix) (1:1.5:3) type B1 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto, avove but 5mm dia and over upto and including for stirrups, spacers and binders
M&L Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
M&L Formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
M&L Formwork square, rectangular or ploygonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.
M&L for Formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L for Flyash Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge.
M& L for Fly ash Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and as directed.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed.
M&L Rendering 5mm thick with CM (1:3) on or concrete surfaces finished even and smooth as in ceiling complete all as specified and as directed by Engr-in-Charge.
M&L for preparing new plastered surfaces of wall with 3 mm wall care putty and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.
M&L for preparation new plaster surfaces of wall and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new plaster surface of ceiling and applying two coats of white wash complete all as specified and as directed by Engr-in-Charge.
M&L for Hardcore of gauge n exc. 63 mm, except material retreived from item 1 deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface
M&L silver sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by the Engr-in-Charge.
M&L 100 mm PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.
M&L for 25 mm cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in floor finished complete all as specified and as directed by Engr-in-Charge.
M&L for 25mm Damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 type B0 including necessary formwork
M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frame and similar work con- forming to Fe.290.Gde-E-165
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specifed.
S&F of 4 mm thick Sheet glass frosted , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
M&L for two coat of synthetic enamel paint over a coat of yellow primer including preparation on steel surfaces of any description over 10 cm width or girth complete all as specified and as dircted.
S&F vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.
S/F 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed by Engr-in-Charge.
S&F Vitreous China wash basin Pedestal pattern, white, flat back size 580x450 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeincluding brackets, complete all as specified and as directed by Engr-in-Charge.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 15 mm dial PVC connection 450 mm long, complete all as specified and as directed by Engr-in-Charge.
S&F waste coupling of PTMT (half of full threaded) complete all as specified and as directed by Engr-in-Charge.
S&F 32 bore PTMT Wash hand basin waste pipe 90 cm long complete all as specified and as directed by Engr-in-Charge.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.
S&F 15mm bore Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F 15 mm bore Stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)
S&F swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make -Prayag/Marc/Essco/Jaquar).
S&F 15mm dia fancy type long shunk concealed Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
M&L for coloured Glazed ceramic tiles in vertical surface 450x300 6-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified.
M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including 15mm thick screed bed in cement mortor 1:6 complete all as specified
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
M&L for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Ditto as above but in wall complete all as specified.
M&L for 110 mm bore PVC (SWR) vent cowl
M&L PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.
S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, incl 20 mm float valve complete all as specified in SSR Part I
M & L screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as directed by the Engr-in-Charge.
Supply only intergral water proofing compound (WPC) of best quality
M& L for bituminous primer @ 0.50 KG/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction complete all as specified and as directed by the Engr-in-Charge.
M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed by Engr in Charge.
M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed by Engr-in-Charge
M&L Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.
M&L for Removing excavated material exc 1.5 km n.exc 5 KM and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.
M&L for PCC in 1:3:6 type C1 ( using 20 mm graded stone aggregate) as in surface channel including necessary formwork.
Extra for forming fair finished drain 30 cm inner girth
S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.
All as per item no 63 above but 20 mm bore pipe.
M& L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F Stainless steel butt hinges medium weight 100mm long for PVC door.
S&F Aluminium anodized barrel tower bolts, extruded section 200mm long.
S&F Aluminium anodized handles, D type, 150mm long
M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified and directed.
M&L for 200 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.
M&L for chemically treated machine pressed precast concrete coloured interlocking paver block with Grey cement and no pigment any shape and size conforming to IS 15658-2006 of 100 mm thickness M-50 Grade.
M&L for 100 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in flooring of floor etc and finished the spike rolling for vehicle to move , interlocking floor complete all as specified and as directed.
M&L for 100 mm thick cement concrete type C1 (1:3:6 ) Norminal mix as in subbase of floor etc and finished the complete all as specified and as directed.
M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
S&F steel work in i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate for stud co;umn in rcc etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming grade St-240 complete all as specified and as directed by the Engr-in-Charge.
S&F angle iron, MS flat iron in wind ties and similar work confirming to Fe 410-0 or Fe 310-0.complete all as specified and as directed by the Engr-in-charge
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by the Engr-in-Charge.
S& F OF Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc
M & L for complete removal of existing treatment and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm). Make of Weather proof exterior acrylic emulsion and primer : Asian Apex Ultima/Berger weather coat long life 10
M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm). Make of Weather proof exterior acrylic emulsion and primer : Asian Apex Ultima/Berger weather coat long life 10
M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying wall care putty 1 mm each including complete removal of existing treatment all as specified and directed.
Dismantling floor hearth or wall tiling and interlocking incl cement mortar bedding or sand and removing the rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
S&F of coloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheet in roof coverings.
Dismantling wrought iron or mild steel work of any description as in truss and similar works complete all as directed by the Engr-in-Charge.
S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.
M& L for fabrication and fixing of powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm scred for fixing fully including double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1no 200mm long aluminium tower bolt per shutter including taking down old onecomplete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for aluminium anodised snap grid (605X605mm size) to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm, cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including proper hanging arrangement with 4 mm dia anodized galvanised iron wire with false ceiling iof 4 mm thick E board classic for insulation and accoustic purposes of size 600X600 mm fixed with necessary accessories to frame work or with staples on snap grid upto ceiling proper scafolding arrangementsand with complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid ENDURA tiles 30cm x 30cm x 10cm thick , set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.
All as per item no 9 but as in skirting ( 12 to 15 mm thick) but on 10 mm tkick rendering/ back coating in CM (1:4) complete all as specified and as directed.
M&L preparing old painted steel surface of any description not otherwise described for over 10 cm width or girth and applying one coat of synthetic ennamel paint complete all as specified and directed.
M&L Brick work with Locally available best quality bricks , laid on edges on top surfaces of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.
M&L Brick work with Locally available best quality bricks , laid flat on verticle inclined sides of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.
M&L for plain cement concrete 1:2:4 Type Bo (using 12.5mm graded stone aggregate as in coping etc including necessary form work complete all as specified and directed.
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').
Material & labour for provision of ceiling fan hooks bent to shape, angle iron frame and welding it to existing structure complete all as specified and as directed.
Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm directed by Engineer-in-charge.
Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) fixed over wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including fixing arrangement for PVC conduits and sunken boxes over surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.
(b) One socket out let 5/6 amps point on the same board
(c) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(d) One socket out let 5/6 amps point on the independent board
All as per item No 2 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin , 5 and 15 amp flush type universal complete all as specified and directed.
S & F Wall monted slim LED batten 10W,(2 feet) with extruded aluminium housing, with integrated LED driver and 02 NOS of round/ square PVC blocks for maounting of LED fitting on surface of wall including provn of flexible wire for connecting up complete all as specified and directed by Engr-in- charge.
S & F Wall monted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver and 02 NOS of round/ square PVC blocks for maounting of LED fitting on surface of wall including provn of flexible wire for connecting up complete all as specified and directed by Engr-in- charge.
S & F LED street light fittins 35 watt in aluminium PDC housing, toughned glass cover with IP66 protection complete all as spedified and as directed. (Make – Havells Cat No: ENDURAPEARLSL30WLED757SASYTOPCMP or equivalent in Philips, Bajaj, CG.
S & F exhaust fan , steel body AC single phase, 230 V of size 300 mm sweep with blades and frames and louvers complete all as specified by Engr in charge
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
M&L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.
M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .
S& F BLDC ceiling fan complete with, blades, down rods, and accessories ,230V, , 1200 mm sweep.Min air delivery, 210 CFM, star rated, including provn of ceiling fan hook of 10 mm dia MS rod bent to shape and fixing the hook to structure complete all as specified and directed.
Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed by Engr-in-Charge.
M/S MOHAN KUMAR BANSAL
L. B. SHARMA
M/s. MD IRSHAD
M/s. RAMPHAL GARG
SHRI MRITYUNJOY KAR
KAMALA INDUSTRIES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .