Construction Work of Compound Wall, Sahnangruh, Prarthana Hall, Store Room, Kota Stone, Bench, Plastering, Paving Block Road and LED Street Light with Pole as per various area of Dhari, Dist.: Amreli Under Swarnim Jayanti Chief Minister Urban Development Scheme (UDP-88) Year-2024-25. (Fourth Attempt)

NAME OF WORK: CONSTRUCTION WORK OF COMPOUND WALL, SNANAH GRUH,

PRATHANA HALL, STORE ROOM, KOTA STONE, BENCH, PLASTERING WORK, PAVING

BLOCK ROAD AND LED STREET LIGHT WITH POLE, AS PER VARIOUS LOCATION CHART

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

9 Schedule - "B"- 9

10 Schedule - "B"- 10

11 Schedule - "B"- 11

12 Schedule - "B"- 12

13 Schedule - "B"- 13

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_______Percentage (should

be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender

works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 95,74,510=00 Put to Tender Rs. 95,74,510=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF COMPOUND WALL

LOCATION : At Nabapara Smashan, Dhari.

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for Foundation upto 1.50Mt. Depth including sorting

out and stacking of useful materials and disposting the

excavated stuff upto all lead and sretta 134.50 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

coarse sand : 6- machine cut stone aggregates 40 mmnominal

size) and curing complete including cost of formwork in (A)

Foundation and Plinth 13.50 3095.24 Cumt

Providing and laying cement concrete work 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20mm nominal

size) and curing complete including cost of formwork but

excluding reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass

concrete 28.20 4094.09 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS: (i) Having 6.70 ###### Cumt

cross-sectional

Item No. 5 area 0.08 to 0.18 Sq.M

Providing and laying ordinary cement concrete 1:2:4 (1-Cement

2- coarse sand : 4- graded stone aggregates 20 mm nominal

size) and finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of reinforcement for

R.C.C work in (A) BEAMS :(ii) Having cross-sectional area

more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying cement concrete 1:3:6 (1-Cement: 3-

Coarse sand: 6- crushed stone aggregates 20mm nominal

size) and curing complete including cost of formwork in (A) 6.90 4152.60 Cumt

Filling available excavated earth(excluding rock in trenches

plinth, sides of foundation etc,) in layor not exceeding 20cm. In

depth consolidating each depo sited layer by ramming and 86.30 136.91 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete ###### 77.28 Kg

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) 37.60 4245.09 Cumt

20mm thick sand faced cement plaster on walls up to height

mtrs. above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of

C.M. 1:1 (1 cement : 1 sand) etc. 563.40 342.41 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

Providing & fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacing and

frame all-round square or round bars with round headed bolts

and nuts or by screws. (A) Plain grill 150.00 106.23 Kg

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign 6.00 92.20 Sqmt

matter. Total Amounts Rs...…… #########

matter. Total Amounts Rs...…… #########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- PROVIDING, SUPPLYING & ERECTING WORK OF LED STREET LIGHT WITH

LOCATION : At Nabapara Smashan Main Road, Dhari.

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din- Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.(D) 6 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 59 kg

Providing and erecting Street Light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable

B Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of 1.5.mtr.

length with 110 deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95, THD <

%, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with over-voltage

protection. (iii) above 24 to 36 watts

providing and erecting Miniature circuit breaker single pole 0.5A to

2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 17.00 270.68 No

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size. (E) 3 136.00 137.36 Rmt

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables. (A-1) 4 core 4 Sq. mm

Supplying and erecting “B” class Galvanised iron pipe having

smooth finished bore of the pipe on both ends erected nuts and

bolts along the pole / wall shaping the pipe as per site requirement.

Pipe dia as following. (c) 40mm dia. 20.40 249.47 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II ) with necessary

connecting accessories of same material at required depth in

existing trench for laying of cable. below ground / road surface for 529.00 62.62 Rmt

Item No. 9cable (A) 50mm dia.

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground

to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS

2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from

16 Gauge MS Sheet with angle iron legs 45 cm long made from

35 X 35 X 5 mm thick MS angle.

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed

providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat 1.00 ###### No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for 1.00 ###### No

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO

& 2 NC aux contacts complete with 415V/220V operating coil

suitable for (L&T, BCH, T.C. Siemens, C&S make). (a) for 25 / 32 1.00 ###### No

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth 17.00 368.65 No

For using salt and charcoal / coke as required for pipe type 17.00 171.70 No

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 524.00 55.55 Rmt

Total Amounts Rs...…… ########

Total Amounts Rs...…… ########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF SNANAH GRUH

LOCATION : At Nabapara, Dhari

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out

and stacking of useful materials and disposing of the excavated

stuff up to all lead and sretta 27.60 157.15 Cumt

Providing and laying cement concrete 1:3:6(1 cement :3 coarse

sand :6 Machine cut stone aggregate 40mm nominal size and

curing complete including cost of formwork in (a) Foundation and 5.40 ###### Cumt

(i) Uncoursed rubble masonary with machine cut stone of

approved quality in foundation and plinth in cement mortar 1:6 (1

cement, :6 coarse sand) Including levelling up etc.complete 30.50 ###### Cumt

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6-crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps / 5.20 ###### Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size)

and finishing smooth with,curing etc. complete including the cost

of formwork but excluding the cost of reinforcement for R.C.C

work in (A) BEAMS: (i) Having cross-sectional area 0.05 to

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and 11.00 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete 3.70 481.80 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4-graded stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Foundation 3.10 ###### Cumt

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional 28.50 ###### Cumt ########

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:5 (1-Cement : 5 -coarse sand ) in foundation and plinth (B)

Providing and laying ordinary cement concrete 1:2:4 (1 cement , :2

coarse sand 4graded stone aggregate 20 mm nominal size) and

finishing and smooth with curing etc. complete including the cost

of form work but excluding the cost of reinforcement for R.C.C.

work in (iii) Slab having more than 10 Cm.and up to 13 Cm. 6.10 ###### Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size)

for R.C.C lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of 1.20 ###### Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto

floor two level ###### 77.28 Kg

Providing up to floor two level precast cement concrete jali or grill

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm

nominal size) reinforced with 1.6mm dia mils steel wire including

roughening, cleaning, fixing and finishing in cement mortar 1:3 and

curing etc. complete. (D) 75mm thick 5.40 810.17 Sqmt

Providing 15 mm thick cement plaster single coat on brick /

concrete wall for interior plastering up to floor two level finished

even and smooth in (i) Cement mortar 1:4 (1 cement : 4 sand)

20mm thick sand faced cement plaster on walls up to height

10meter above ground level consisting of 12mm thick backing

coat of cement Mortar 1:3 (1 cement :3 Sand) and 8mm thick

finishing coat of cement Mortar 1:1 (1 cement :1 Sand) etc. 167.30 342.41 Sqmt

Providing and laying colour digital glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 37.70 868.55 Sqmt

Item No.in18white cement.

Providing and fixing 50mm internal or external angles of glazed 12.30 102.72 Rmt

Providing and laying colour Ditial glazed tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3 coarse sand) and jointed with white cement slurry

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on wall surfaces to give an even shade

including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth. 141.40 82.85 Sqmt

Finishing Wall with wether proof Exterior Emulsion paint on Wall

Surface ( Two Coats) to give an reuired shape even shade after

thoroguhly brushing the surface to remove all dirt, and remains of

loose powdered materials of loose powdered materials Etc. 167.30 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI)

water tank of required capacity each with all necessary fittings and

connection etc. complete on terrace. ###### 3.95 Ltr

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and fixing to wall ceilling and floor 6.0 Kgf/cm2 working

pressure polythelene pipes of the following outside dia low density

complete plete with special flange compression type fittings, wall

clips etc. including making good the wall ceilling and floor [B] 80.00 106.56 Rmt

Providing and fixing Gun metal check or non-return full-way wheel

value [C] Copper metal (i) 25mm dia 4.00 420.63 Rmt

Providing and fixing screw down bib taps of following size. ( A )

Brass screw down bib tap polished bright.15mm Dia. 14.00 186.83 Each

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and fixing 35mm thick factory made moulded door

shuter consisting of solid core single leaf flush door of 30mm

thickness, lipped with 15mm (5mm x 3) thick x 30mm width on one

stiles and top rail and 10mm (5mm x 2) thick x 30mm width on the

other stiles and bottom rails. The inner panel laminated with 2mm

thick termite proof, water proof and fire resistant moulded PVC

sheet with 2,4,6 raised panel design in different plain and /or

prelim colours on one side after routing the moulded design on

flush door and 2mm plain and/or prelim PVC sheet on other side

using rubber adhesive on flush door and solvent cement adhesive

on the PVC liping etc. complete as per direction of Engineer in 25.90 ###### Sqmt

Providing and fixing G.I. Rain water Spout of 50MM dia and 30Cm.

Length 20.00 101.90 Each

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch/bell push & accessories and earth continuity

of following type, erected on PVC/Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on/in wall/ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose/ H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories (Cat. I-Anchor,

SG, Elleys) 22.00 375.72 Each

Total Amounts Rs...…… ########

Total Amounts Rs...…… ########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK:- CONSTRUCTION WORK OF PAVING BLOCK ROAD AND PROVIDING AND

SUPPLYING OF BENCH

LOCATION : At Nabapara Smashan, Dhari.

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto all 98.40 109.41 Cumt

Item No. sretta

Supplying of crushed stone aggregates, chippings etc. of machine

cut stone of 40mm size free of disintegrated pieces, deleterious

and organic matter (for bitumen surface dressing etc.) and 49.20 ##### Cumt

Item No.as3 per I.R.C. Code.

Spreading the stone aggregate for rolling and W.B.M. including

filling the interstices to required camber and gradient (excluding

spreading of blindage) (iii) 40mm to 60mm size crushed stone 49.20 262.23 Cumt

Supplying of Stone Dust all lead and lift 4.00 747.29 Cumt

Spreading blindage or road crust filling the gaps in metal and

leveling to camber and gradient as directed. (ii) Sand / Stone 4.00 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite

and Kankar) including watering not exceeding 150mm thickness

(Main layer including binding materials ) including filling in

depressions which occur during the process.(A) With power 327.90 15.87 Sqmt

Providing and fixing Pre-Cast Rubber Dye Inter locking concrete

Block 60mm thick with grade of concrete M-300 pnumatic

compressed/vibrated mechanically and as per approved design

Confirming to IS 15658: 2006 including 35mm sand/ stone

dust/greet layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

cement mortar 1:1 including neat cement finishing, watering etc. 231.80 24.28 Rmt

Providing & Fixing Cast Iron powder coating garden bench

capicity 4 seat and finishing & fixing as per instruction etc. 15.00 ##### Nos. ########

Total Amounts Rs...…… ########

Total Amounts Rs...…… ########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF PRAYER HALL

LOCATION : Nabapara Smashan, Dhari.

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting

out and stacking of useful materials and disposing of the

excavated stuff up to all lead and sretta 4.40 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curring complete including cost of formwork in (a)

Foundation and plinth 14.60 3095.24 Cumt

Providing and laying controlled cement concrete M.150 for

curing complete including cost of formwork but excluding

reinforcement for reinforced concrete work in (A) Foundations,

footings,Base of columns and Mass concrete 12.60 4028.21 Cumt

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (B) COLUMNS:(ii) Having cross-sectional area more

than 0.08 Sq.M and upto 0.18 Sq.M 1.30 ###### Cumt

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS :(ii) Having cross-sectional area more 5.10 9485.95 Cumt

Item No. 7 and upto 0.12 Sq.M

Filling available excavated earth(excluding rock in trenches

plinth, sides of foundation etc,) in layor not exceeding 20cm. In

depth consolidating each depo sited layer by ramming and 29.00 136.91 Cumt

Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete. 21.30 301.77 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level ###### 77.28 Kg

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

read lead paint. (A) In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common 20.90 9108.48 Qtl

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

read lead paint. (D) In trussses and trussed purlins, upto

M. span and 15 M ovarall height. 6.30 ###### Qtl

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign 136.80 92.20 Sqmt

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer. filled

with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet. 132.30 734.19 Sqmt

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with water proofing cement paint of on wall

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remains

of loose powered materials. 25.80 60.30 Sqmt

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall /ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected 20.00 449.45 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF STORE ROOM

LOCATION : At Nabapara Smashan, Dhari.

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 M Depth including sorting

out and stacking of useful materials and disposing of the

excavated stuff up to all lead and sretta 46.60 122.93 Cumt

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curing complete including cost of formwork in (a) 13.50 3095.24 Cumt

Item No. 3 and plinth

Providing and laying cement concrete 1:2:4 (1- cement : 2-

coarse sand : 4- graded stone aggregate 20 mm. Nominal size)

and curing complete including cost of form work in : (a) 4.40 3805.28 Cumt

Item No. 4 and plinth

Providing and laying cement concrete work 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete including cost of formwork but

excluding reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass

concrete 10.30 4094.09 Cumt

Filling available excavated earth,(Ecluding rock in trenches

plinth, sides of foundation etc.)in layer not exceeding 20 cm, in

depth consolidating each depo sited layer by ramming and 26.10 136.91 Cumt

Filling in plinth with sand under floors including watering

ramming, consoildating and dressing etc. complete 43.60 481.80 Cumt

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS (iii) Having cross-sectional area more 11.70 7990.09 Cumt

8 and upto 0.18 Sq.M

(B) COLUMN (iii) Having cross-sectional area more than

0.12Sq.M and upto 0.18 Sq.M 9.40 ####### Cumt

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4-graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc.complete including the cost of formwork but

excluding the cost of reinforcement. 1.80 8518.14 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4-graded stone aggregates 20 mm nominal size)

for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to

give a smooth and even surface centering and formwork and 1.10 6693.29 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level 3777.50 77.28 Kg #########

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) 38.30 4245.09 Cumt #########

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) 139.20 195.42 Sqmt

20mm thick sand faced cement plaster on walls up to height

mtrs. above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing

coat of C.M. 1:1 (1 cement : 1 sand) etc. complete with interior

plastering above floor two level for every additional storey hight 187.40 342.41 Sqmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) and jointed with gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm thick

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames

cm x 7 cm. size including anodized alluminium fixtures and

fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x

1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures 13.40 1583.95 Sqmt

Itemtransparent

No. 19 silicon sealant glass fixing to frame as per

Providing and fixing M.S. Grills of required pattern to wooden

frames of Pipe / Angles etc.including Priming coat of approved

primer and Two coats of Oil painting etc. complete Ordinary 241.20 167.76 Kg

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on wall surfaces to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered 139.20 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete 187.40 120.26 Sqmt

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to 10.50 9108.48 Qtl

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint. (D) In trussses and trussed purlins, upto

25 M. span and 15 M ovarall height. 5.60 ####### Qtl

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign 120.80 92.20 Sqmt

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer. filled

with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet. 120.90 734.19 Sqmt

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq.

mm & earthwire of 1.5 sq. mm (green) both are of ISI marked

1.1 kv grade FRLS PVC insulated multistrand copper wires, in

below type of pipe erected with 6A Tissino Type ISI marked

flush type switch / bell push and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick PC(Polycarbonet)

/Acrylic/ Laminated sheet. with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on 17.00 354.51 Pt

wall/ceiling complete Total Amounts Rs...…… #########

wall/ceiling complete Total Amounts Rs...…… #########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- PROVIDING, SUPPLYING & ERECTING WORK OF LED STREET LIGHT WITH

LOCATION : Vekariyapara Main Road, Dhari.

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement. (D) 6 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 59 kg

Providing and erecting Street Light pole bracket comprising main

B Class GI pipe of 4.2 cm/require outside dia. complete with

suitable B Class G.I. sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm /80mm / required size of pole top having

sufficient fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable welded

stays, reducer and with check nuts complete painted with one coat

of Red oxide / PU base primer and two coats of Aluminium / PU 12.00 683.77 No.

3 with following nos of arms. [A] Single Arm Bracket

Supplying and erecting LED street light /Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95, THD <

10%, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt. LED driver efficiency > 85% as per

approved vender list make. (fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and ,Light 12.00 ###### No.

providing and erecting Miniature circuit breaker single pole 0.5A to

2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size. (E) 96.00 137.36 Rmt

Item 2.56 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables. (A-1) 4 core 4 Sq. 377.00 364.61 Rmt ########

Supplying and erecting “ B ” class Galvanised iron pipe having

smooth finished bore of the pipe on both ends erected nuts and

bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following. (c) 40mm dia. 20.40 249.47 Rmt

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road 372.00 62.62 Rmt

Item No.for9 enclosing cable (A) 50mm dia.

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground

to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated

from 16 Gauge MS Sheet with angle iron legs 45 cm long

made from 35 X 35 X 5 mm thick MS angle.

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to operate

on 240V + 5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required 1.00 ###### No.

Item No. 11 connection erected as directed

providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only 1.00 ###### No.

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] 1.00 ###### No.

Providing and erecting AC-3 duty 3 pole power contactor with

NO & 2 NC aux contacts complete with 415V/220V operating coil

suitable for (L&T, BCH,T.C., Siemens, C&S make). (a) for 25 /

A rating 1.00 ###### No.

Providing and erecting Pipe type earthing having 150 cms.long

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary 8 12.00 368.65 No.

For using salt and charcoal / coke as required for pipe type

earthing. 12.00 171.70 No.

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the

same and making the surface as normal ground. 367.00 55.55 Rmt

Total Amounts Rs...…… ########

Total Amounts Rs...…… ########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF PRAYER HALL

LOCATION : At Vekariyapara Smashan, Dhari.

SCHEDULE - "B-8"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting

out and stacking of useful materials and disposing of the

excavated stuff up to all lead and sretta 4.40 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curring complete including cost of formwork in (a)

Foundation and plinth 14.60 3095.24 Cumt

Providing and laying controlled cement concrete M.150 for

curing complete including cost of formwork but excluding

reinforcement for reinforced concrete work in (A) Foundations,

footings,Base of columns and Mass concrete 12.60 4028.21 Cumt

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (B) COLUMNS:(ii) Having cross-sectional area more

than 0.08 Sq.M and upto 0.18 Sq.M 1.30 ###### Cumt

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS :(ii) Having cross-sectional area more 5.10 9485.95 Cumt

Item No. 7 and upto 0.12 Sq.M

Filling available excavated earth(excluding rock in trenches

plinth, sides of foundation etc,) in layor not exceeding 20cm. In

depth consolidating each depo sited layer by ramming and 29.00 136.91 Cumt

Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete. 21.30 301.77 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level ###### 77.28 Kg

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

read lead paint. (A) In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common 20.90 9108.48 Qtl

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

read lead paint. (D) In trussses and trussed purlins, upto

M. span and 15 M ovarall height. 6.30 ###### Qtl

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign 136.80 92.20 Sqmt

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer. filled

with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet. 132.30 734.19 Sqmt

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with water proofing cement paint of on wall

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remains

of loose powered materials. 25.80 60.30 Sqmt

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall /ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected 20.00 449.45 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF SNANAH GRUH

LOCATION : At Nabapara, Dhari

SCHEDULE - "B-9"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out

and stacking of useful materials and disposing of the excavated

stuff up to all lead and sretta 27.60 157.15 Cumt

Providing and laying cement concrete 1:3:6(1 cement :3 coarse

sand :6 Machine cut stone aggregate 40mm nominal size and

curing complete including cost of formwork in (a) Foundation and 5.40 ###### Cumt

(i) Uncoursed rubble masonary with machine cut stone of

approved quality in foundation and plinth in cement mortar 1:6 (1

cement, :6 coarse sand) Including levelling up etc.complete 30.50 ###### Cumt

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6-crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps / 5.20 ###### Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size)

and finishing smooth with,curing etc. complete including the cost

of formwork but excluding the cost of reinforcement for R.C.C

work in (A) BEAMS: (i) Having cross-sectional area 0.05 to

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and 11.00 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete 3.70 481.80 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4-graded stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Foundation 3.10 ###### Cumt

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional 28.50 ###### Cumt ########

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:5 (1-Cement : 5 -coarse sand ) in foundation and plinth (B)

Providing and laying ordinary cement concrete 1:2:4 (1 cement , :2

coarse sand 4graded stone aggregate 20 mm nominal size) and

finishing and smooth with curing etc. complete including the cost

of form work but excluding the cost of reinforcement for R.C.C.

work in (iii) Slab having more than 10 Cm.and up to 13 Cm. 6.10 ###### Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size)

for R.C.C lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of 1.20 ###### Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto

floor two level ###### 77.28 Kg

Providing up to floor two level precast cement concrete jali or grill

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm

nominal size) reinforced with 1.6mm dia mils steel wire including

roughening, cleaning, fixing and finishing in cement mortar 1:3 and

curing etc. complete. (D) 75mm thick 5.40 810.17 Sqmt

Providing 15 mm thick cement plaster single coat on brick /

concrete wall for interior plastering up to floor two level finished

even and smooth in (i) Cement mortar 1:4 (1 cement : 4 sand)

20mm thick sand faced cement plaster on walls up to height

10meter above ground level consisting of 12mm thick backing

coat of cement Mortar 1:3 (1 cement :3 Sand) and 8mm thick

finishing coat of cement Mortar 1:1 (1 cement :1 Sand) etc. 167.30 342.41 Sqmt

Providing and laying colour digital glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 37.70 868.55 Sqmt

Item No.in18white cement.

Providing and fixing 50mm internal or external angles of glazed 12.30 102.72 Rmt

Providing and laying colour Ditial glazed tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3 coarse sand) and jointed with white cement slurry

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on wall surfaces to give an even shade

including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth. 141.40 82.85 Sqmt

Finishing Wall with wether proof Exterior Emulsion paint on Wall

Surface ( Two Coats) to give an reuired shape even shade after

thoroguhly brushing the surface to remove all dirt, and remains of

loose powdered materials of loose powdered materials Etc. 167.30 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI)

water tank of required capacity each with all necessary fittings and

connection etc. complete on terrace. ###### 3.95 Ltr

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and fixing to wall ceilling and floor 6.0 Kgf/cm2 working

pressure polythelene pipes of the following outside dia low density

complete plete with special flange compression type fittings, wall

clips etc. including making good the wall ceilling and floor [B] 80.00 106.56 Rmt

Providing and fixing Gun metal check or non-return full-way wheel

value [C] Copper metal (i) 25mm dia 4.00 420.63 Rmt

Providing and fixing screw down bib taps of following size. ( A )

Brass screw down bib tap polished bright.15mm Dia. 14.00 186.83 Each

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and fixing 35mm thick factory made moulded door

shuter consisting of solid core single leaf flush door of 30mm

thickness, lipped with 15mm (5mm x 3) thick x 30mm width on one

stiles and top rail and 10mm (5mm x 2) thick x 30mm width on the

other stiles and bottom rails. The inner panel laminated with 2mm

thick termite proof, water proof and fire resistant moulded PVC

sheet with 2,4,6 raised panel design in different plain and /or

prelim colours on one side after routing the moulded design on

flush door and 2mm plain and/or prelim PVC sheet on other side

using rubber adhesive on flush door and solvent cement adhesive

on the PVC liping etc. complete as per direction of Engineer in 25.90 ###### Sqmt

Providing and fixing G.I. Rain water Spout of 50MM dia and 30Cm.

Length 20.00 101.90 Each

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch/bell push & accessories and earth continuity

of following type, erected on PVC/Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on/in wall/ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose/ H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories (Cat. I-Anchor,

SG, Elleys) 22.00 375.72 Each

Total Amounts Rs...…… ########

Total Amounts Rs...…… ########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- PROVIDING AND LAYING KOTA STONE AND PLASTERING WORK

LOCATION : At Vekariyapara Smashan, Dhari.

SCHEDULE - "B-10"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and laying polished kota stone slab 25mm thick in

risers of steps, skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement: 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. 161.30 1109.07 Sqmt #########

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1- 55.20 250.54 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

Total Amounts Rs...…… #########

Total Amounts Rs...…… #########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF STORE ROOM

LOCATION : At Vekariya Para Smashan - Dhari.

SCHEDULE - "B-11"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 M Depth including sorting

out and stacking of useful materials and disposing of the

excavated stuff up to all lead and sretta 46.60 122.93 Cumt

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curing complete including cost of formwork in (a) 13.50 3095.24 Cumt

Item No. 3 and plinth

Providing and laying cement concrete 1:2:4 (1- cement : 2-

coarse sand : 4- graded stone aggregate 20 mm. Nominal size)

and curing complete including cost of form work in : (a) 4.40 3805.28 Cumt

Item No. 4 and plinth

Providing and laying cement concrete work 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete including cost of formwork but

excluding reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass

concrete 10.30 4094.09 Cumt

Filling available excavated earth,(Ecluding rock in trenches

plinth, sides of foundation etc.)in layer not exceeding 20 cm, in

depth consolidating each depo sited layer by ramming and 26.10 136.91 Cumt

Filling in plinth with sand under floors including watering

ramming, consoildating and dressing etc. complete 43.60 481.80 Cumt

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS (iii) Having cross-sectional area more 11.70 7990.09 Cumt

8 and upto 0.18 Sq.M

(B) COLUMN (iii) Having cross-sectional area more than

0.12Sq.M and upto 0.18 Sq.M 9.40 ####### Cumt

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4-graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc.complete including the cost of formwork but

excluding the cost of reinforcement. 1.80 8518.14 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4-graded stone aggregates 20 mm nominal size)

for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to

give a smooth and even surface centering and formwork and 1.10 6693.29 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level 3777.50 77.28 Kg #########

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) 38.30 4245.09 Cumt #########

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) 139.20 195.42 Sqmt

20mm thick sand faced cement plaster on walls up to height

mtrs. above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing

coat of C.M. 1:1 (1 cement : 1 sand) etc. complete with interior

plastering above floor two level for every additional storey hight 187.40 342.41 Sqmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) and jointed with gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm thick

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames

cm x 7 cm. size including anodized alluminium fixtures and

fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x

1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures 13.40 1583.95 Sqmt

Itemtransparent

No. 19 silicon sealant glass fixing to frame as per

Providing and fixing M.S. Grills of required pattern to wooden

frames of Pipe / Angles etc.including Priming coat of approved

primer and Two coats of Oil painting etc. complete Ordinary 241.20 167.76 Kg

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on wall surfaces to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered 139.20 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete 187.40 120.26 Sqmt

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to 10.50 9108.48 Qtl

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint. (D) In trussses and trussed purlins, upto

25 M. span and 15 M ovarall height. 5.60 ####### Qtl

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign 120.80 92.20 Sqmt

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer. filled

with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet. 120.90 734.19 Sqmt

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq.

mm & earthwire of 1.5 sq. mm (green) both are of ISI marked

1.1 kv grade FRLS PVC insulated multistrand copper wires, in

below type of pipe erected with 6A Tissino Type ISI marked

flush type switch / bell push and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick PC(Polycarbonet)

/Acrylic/ Laminated sheet. with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on 17.00 354.51 Pt

wall/ceiling complete Total Amounts Rs...…… #########

wall/ceiling complete Total Amounts Rs...…… #########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF PAVING BLOCK ROAD AND PROVIDING AND

SUPPLYING OF BENCH

LOCATION : At Vekariyapara Smashan, Dhari.

SCHEDULE - "B-12"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto all 572.40 109.41 Cumt

Item No. sretta

Supplying of crushed stone aggregates, chippings etc. of machine

cut stone of 40mm size free of disintegrated pieces, deleterious

and organic matter (for bitumen surface dressing etc.) and 53.80 ##### Cumt

Item No.as3 per I.R.C. Code.

Spreading the stone aggregate for rolling and W.B.M. including

filling the interstices to required camber and gradient (excluding

spreading of blindage) (iii) 40mm to 60mm size crushed stone 53.80 262.23 Cumt

Supplying of Stone Dust all lead and lift 4.40 747.29 Cumt

Spreading blindage or road crust filling the gaps in metal and

leveling to camber and gradient as directed. (ii) Sand / Stone 4.40 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite

and Kankar) including watering not exceeding 150mm thickness

(Main layer including binding materials ) including filling in

depressions which occur during the process.(A) With power 358.50 15.87 Sqmt

Providing and fixing Pre-Cast Rubber Dye Inter locking concrete

Block 60mm thick with grade of concrete M-300 pnumatic

compressed/vibrated mechanically and as per approved design

Confirming to IS 15658: 2006 including 35mm sand/ stone

dust/greet layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

cement mortar 1:1 including neat cement finishing, watering etc. 188.00 24.28 Rmt

Providing & Fixing Cast Iron powder coating garden bench

capicity 4 seat and finishing & fixing as per instruction etc. 15.00 ##### Nos. ########

Total Amounts Rs...…… ########

Total Amounts Rs...…… ########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika

DHARI NAGARPALIKA - DHARI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-

NAME OF WORK :- CONSTRUCTION WORK OF STORE ROOM

LOCATION : Memon Kabarstan Water Works , Dhari.

SCHEDULE - "B-13"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto all lead and sretta 21.86 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curing complete including cost of formwork in (a) 4.86 3095.24 Cumt

Item No. 3 and plinth

Providing & Laying controlled cement concrete M-200 and

curing complete including the cost of formwork and Excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundation footing base of column and mass concrete

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS :(ii) Having cross-sectional area more 3.16 9485.95 Cumt

Item No. 5 and upto 0.12 Sq.M

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but 0.53 8518.14 Cumt

Item No. 6the cost of reinforcement.

roviding and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1- cement, 3 Fine sand) to

give a smooth and even surface centering and formwork and 0.28 6693.29 Cumt

curing complete

Item No. 7 excluding cost of reinforcement.

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (B) COLUMNS:(ii) Having cross-sectional area

more than 0.08 Sq.M and upto 0.18 Sq.M

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to 2.30 9108.48 Qtl

Item No. rafters

9 and the like.

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint. (D) In trussses and trussed purlins, upto

25 M. span and 15 M ovarall height. 0.80 ####### Qtl

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and other 24.30 92.20 Sqmt

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete ###### 77.28 Kg

Item No. 13two level.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering. 14.21 136.91 Cumt

Filling in foundation and plinth with murrum or selected soil in

layers of 20 cm. thickness including watering, ramming and

consolidating etc. completed. 7.34 301.77 Cumt

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional 10.93 4245.09 Cumt

Providing 15 mm thick cement plaster in single coat on fair

side brick/concrete wall for interior plastering up to floor two

level finished even and smooth in with Floating coat of neat

cement. (i) cement Mortar 1:3 (1 cement : 3 Sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement mortar 1:3 (1- 16.32 145.65 Sqmt

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick

backing coat of Cement Mortar 1:3 (1-Cement : 3-Sand) and

8MM thick finishing coat of Cement Mortar 1:1 (1-Cement : 1- 80.51 342.41 Sqmt

Item etc.19complete

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) and jointed with gray cement slurry including rubbing

and polishing complete. (A) Marble slab 25mm thick

Providing wood work in frames of Doors, windows cleare

story windows and othersimilar works wrought, framede and

fixed in position. (A) Indian Teak Wood 5.13 610.23 10Cu.Dm

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x 24mm

x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted

float glass/S.S. Mosquito Jali with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill. 118.80 106.23 Kg

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil,grease, dirt and other foreign matter and scoured

with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead. 3.96 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and other 3.96 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand 65.13 82.85 Sqmt

Item No.smooth.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete. Cat.

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85% as per approved vender list make (fitting

required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage 3.00 238.36 No

Item No.between

31 the ranges shown.) (A) Tube Light with

Providing & erecting Approved make Ceiling Fan with double

ball bearing ISI mark with condenser A.C.230V 50c/s.

mm. sweep complete, canopy erected on existing hook or

clamp with earthing [Make shall be approved by Engineer in 1.00 1738.21 No

Total Amounts Rs...…… #########

Total Amounts Rs...…… #########

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhari Nagarpalika

Chief Officer Administrator

Dhari Nagarpalika Dhari Nagarpalika