Provision of fencing and plinth including connected items for transformer and panels in Allenby line area under GE Utility Ambala Cantt

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/erection of poles/stays etc.and getting out in soft soil complete all as specified and directed.

All as per Item No. 1 above but depth exceeding 1.50 metre and not exceeding 3.0 metre.

Returning, filling in, in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for plain cement concrete (1:4:8) type D2 (using 40mm graded mechanically crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed

Material and labour for cement concrete (1:3:6) type C1 (using 20mm graded mechanically crushed stone aggregates) as in coping, padestal of poles, struts, stays and around the pole including necessary formwork and finishing the exposed surface even and smooth without using extra cement complete all as specified and as directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 11000 Volts grade, with stranded aluminium conductor, of cross sectional area 95 Sq mm 3 core, suitable for 11 KV earthed system and laying in walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make Of Cable: Gloster/ Finolex/ Havells/ Polycab/ CCI/ Universal Cables/ Asian Cables/ KEI Indusries Ltd.

Supply and fixing light grade, GI tubing, of size 100mm dia, with all fittings and fixtures for cable protection and fixed with clamps to pole of size 25x6mm and wall with nuts and bolts or laid in trenches/road crossing etc.complete all as specified and as directed. Make - Tata/Jindal/Surya Prakash/BST/Oswal

Supply and fix cable end termination jointing kit for HT, 11 KV (Earthed) grade cable, outdoor type, heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 to 120 sqmm complete all as specified and directed. Make: Birla 3M/M-Seal/Raychem/Densun/Cabseal

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI earth strip of size 25mm x 4 mm as earth lead connected with equipment by means of nuts, bolts, washers etc protected by GI pipe 40mm bore (medium grade) and connected to earthing test point and earth dolly as directed and as specified and all shown in electrical plate No.3 of SSR Part-I 2009 including excavation and earth work in any type of soil, PCC (1:3:6) type C1 in chamber, pre cast RCC slab 400 x 400 x 50mm thick in cement concrete (1:2:4) type B1, reinforced with with 8mm dia TMT bars @ 15cm C/C both ways with one handle for lifting made out of 8mm dia bar with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, charcoal or coke and salt in alternate layers of 15cm depth, lugs, test point etc and earth testing on completion complete all as specified and as directed.

Material and labour for spreading of shingle or gravel of spread thickness 75mm, spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.

Excavating in post holes (or similar' holes) each not exceeding 0.5 cu.m, getting out in any type of soil, returning. filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

Supply and fixing of chain link fencing of 4mm dia and mesh size 40mm x 40mm including line wires, fixing to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fixing of flat iron fillets (for securing chain link fencing, wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 Gde E-165 including two coats of aluminium paint over one coat of red oxide primer and fixing complete all as specified and directed.

Supply and fixing of MS angle iron fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including two coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks old size , burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified .

Material and labour for hardcore of broken bricks of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of approved colour synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling and taking down of transformer of capacity upto 200 KVA from pole using crane/lift, tools and plants as necessary and installing/mounting on plinth including testing and commissioning of transformer complete all as specified and directed.

R N Enterprises

R D Bansal