Providing Aluminium Partition, Ward screen and Water supply arrangements in Government Hospital at Pallapatti in karur District.

Supplying, fabricating and fixing in position of Aluminium anodised Powder Coated of double leaves door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top. The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section with Vertical & Top rail: [email protected] kg/m Bottom rail: 100x44.45x2.50mm@ 1.974 kg/mLocal rail : 50x44.45x2.5mm @ 1.292 kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/mAlu. Handle: 100x30mm @ 0.988 kg/m the and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 2Nos ., lock-1No., Door stopper with rubber bush including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill All the Alu. Section are to be anodised with matt finish under electricaly controlled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete. Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.Hire charges for closing the window opening with 12 mm thick water proof plywood using country wood reeper of size 50 x 25 mm including making necessary holes in the walls, fixing the reeper and plywood with nails, screws and binding wire and after the counting is over removing of all fitting materials and redoing the damages portion to the original condition etc complete as directed by the departmental officers

Fabricating Supplying and fixing in position of Aluminium anodised With powder coating of any colours matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.700 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/ mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Supplying and fixing of Curtain cloth of approved quality and good variety etc complete as directed by the departmental officer.

Supply of stainless steel rod for curtains of approved quality and good variety etc complete as directed by the departmental officer.

Supply and install medical-grade cubicle curtains (230cm hight) and matching ceiling-mounted / suspended track systems. All products must comply with healthcare safety and fire regulations as specified below. 2. Technical Specifications A. Cubicle Curtains (Fabric) Material: 100% Flame Retardant Polyester (Permanent FR). Fire Safety: Must meet NFPA 701 or BS 5867-2 Type C standards. Infection Control: Antimicrobial/Antifungal treated fabric. Design: * Top Mesh: 20-inch (50 cm) integrated nylon mesh for sprinkler clearance. Bottom Clearance: Curtains must hang 12 inches (30 cm) above the finished floor. Fullness: Width must be 15% greater than track length to ensure privacy. Durability: Must withstand industrial laundering at 75°C (167°F). B. Track & Hardware Track: Heavy-duty extruded aluminum alloy (powder-coated white). Configuration: [Select one: Straight / L-Shape / U-Shape]. Gliders: Low-friction, quiet-glide nylon runners (approx. 10 runners per meter). End Caps: Securely fixed with removable access points for maintenance.

GST 18%