CLEMENT TOWN,DEHRADUN

Transportation including loading & unloading of defective submersible pump set 3 phase any make and capacity 125 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engr-In-Charge.

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 125 HP 2 satges, 3660 LPM, 90 mtr head any make & model complete all as specified and directed by Engr-in-charge.

All per item no.4 but Stainless steel shaft with key

All per item no.4 but Gun Metal/rubber bush

All per item no.4 but Stainless steel sleeve

All per item no.4 but Sand Guard

All per item no.4 but Impeller, lock with key

All per item no.4 but Neck ring (as per existing size and type)

All per item no.4 but Turning & polishing of Pump shaft (lathe work)

Supply only Stainless Steel thrust bearing. parts for submersible motor of capacity 125 HP any make & model complete all as specified and directed by Engr-in-charge.

All per item no.12 but Carbon plate.

All per item no.12 but Rotor Gun Metal/steel

All per item no.12 but Rubber bush

All per item no.12 but Upper housing

All per item no.12 but Lower Housing

All per item no.12 but Turning, polishing of Rotor & shaft (Lathe work)

Rewinding of submersible motor capacity 125 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete.

Transportation including loading & unloading of defective submersible pump set 3 phase any make and capacity 60 HP to 75 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engr-In-Charge.

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 60 HP to 75 HP 6 stages,1700-1500 LPM, 120 mtr head. any make & model complete all as specified and directed by Engr-in-charge.

All per item no.24 but Stainless steel shaft with key

All per item no.24 but Gun Metal/rubber bush

All per item no.24 but Stainless steel sleeve

All per item no.24 but Sand Guard

All per item no.24 but Impeller, lock with key

All per item no.24 but Neck ring (as per existing size and type)

All per item no.24 but Turning & polishing of Pump shaft (lathe work)

Supply only Stainless Steel thrust bearing. parts for submersible motor of capacity 60HP to 75 HP any make & model complete all as specified and directed by Engr-in-charge.

All per item no.32 but Carbon plate.

All per item no.32 but Rotor Gun Metal/steel

All per item no.32 but Rubber bush

All per item no.32 but Upper housing

All per item no.32 but Lower Housing

All per item no.32 but Turning, polishing of Rotor & shaft (Lathe work)

Rewinding of submersible motor capacity 60 HP to 75 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete.

Transportation including loading & unloading of defective submersible pump set 3 phase any make and capacity 25 HP to 40 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engr-In-Charge.

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 25 HP to 40 HP 5 stages ,1500 LPM, 80 mtr head. any make & model complete all as specified and directed by Engr-in-charge.

All per item no.44 but Stainless steel shaft with key

All per item no.44 but Gun Metal/rubber bush

All per item no.44 but Stainless steel sleeve

All per item no.44 but Sand Guard

All per item no.44 but Impeller, lock with key

All per item no.44 but Neck ring (as per existing size and type)

All per item no.44 but Turning & polishing of Pump shaft (lathe work)

Supply only Stainless Steel thrust bearing. parts for submersible motor of capacity 25 HP to 40 HP any make & model complete all as specified and directed by Engr-in-charge.

All per item no.52 but Carbon plate.

All per item no.52 but Rotor Gun Metal/steel

All per item no.52 but Rubber bush

All per item no.52 but Upper housing

All per item no.52 but Lower Housing

All per item no.52 but Turning, polishing of Rotor & shaft (Lathe work)

Rewinding of submersible motor capacity 25 HP to 40 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete.

Transportation including loading & unloading of defective submersible pump set 3 phase any make and capacity12.5 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engr-In-Charge.

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 12.5 HP 10 stages,500 LPM,, 55 mtr head. any make & model complete all as specified and directed by Engr-in-charge.

All per item no.64 but Stainless steel shaft with key

All per item no.64 but Gun Metal/rubber bush

All per item no.64 but Stainless steel sleeve

All per item no.64 but Sand Guard

All per item no.64 but Impeller, lock with key

All per item no.64 but Neck ring (as per existing size and type)

All per item no.64 but Turning & polishing of Pump shaft (lathe work)

Supply only Stainless Steel thrust bearing. parts for submersible motor of capacity 25 HP to 40 HP any make & model complete all as specified and directed by Engr-in-charge.

All per item no.72 but Carbon plate.

All per item no.72 but Rotor Gun Metal/steel

All per item no.72 but Rubber bush

All per item no.72 but Upper housing

All per item no.72 but Lower Housing

All per item no.72 but Turning, polishing of Rotor & shaft (Lathe work)

Rewinding of submersible motor capacity 12.5 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete.

Repair to defective submersible motor of capacity 5 HP cap, 150 LPH, 50 mtr head, 440 volts 3 phase complete all as specified and directed by Engr-in-charge. As per the following specification :- (i) Transporting to workshop including loading and unloading, dismantling and cutting out burnt winding and cleaning the slots by cleaning re-agent and repair to damage stator slots. (ii) Rewinding to submersible motor with suitable size of super enamelled copper conductor as per existing size and gauge and insulating materials. (iii) Replacement of thrust bearing – 01 No. (iv) Replacement of bushes of rotor – 02 Nos. (v) Replacement of thrust Plate and ped plate – 01 No . (vi) Turning, polishing of Rotor & shaft (Lathe work) (vii) After repairing of motor re-assembling, painting, transporting back to P/H including loading and unloading, refixing on the same base and testing complete.

All as per item no. 81 but for 3 HP cap,150 LPH, 50 mtr head

Lifting of submerssible pump set of any cap from borewell carefully with coloumn pipe of size 50/80 mm dia flanged/socketed MS/GI,3 mtr each length (10 to 20 Nos of pipe) along with existing submerssible electric cable and shifting the pipe aside for reuse as directed by Engr-in-charge.

Opening the submersible pump from the motor of capacity 5 HP cap., 150 LPH, 50 mtr head., transporting to workshop, dismantling of pump set,tracing out the defects,and taking out the u/s parts from the pump set, metling, grinding to bring the set in its original position, replacement of neck ring, key set, brass bushes, adjustment nut, thrust plate, coupling bushes, CI/MS bowl, sand guard, GM ball bush, katcher key set etc., assembling the pump set, painting and testing complete all as specified and directed by Engr-in-charge.

All as per item no. 85 but for 3 HP cap., 150 LPH, 50 mtr head.

Opening, dismantling, decoupling and taking out defective induction motor of capacity 185 HP, 440 V, 3 phase from foundation / base frame, transporting to workshop for repair & transporting back at site after repair and refixing the same on its position, recoupling, reconnection, testing commissioning complete all as specified and directed by Engr-in-charge. Note:- Repair work shall be measured and paid separately under respective item of Sch 'A'.

All as per item no. 87 but for 150 HP cap.

All as per item no. 87 but for 120 HP cap.

All as per item no. 87 but for 40/50 HP cap.

All as per item no. 87 but for 25/30 HP cap.

All as per item no. 87 but for 7.5 HP cap.

All as per item no. 87 but for 5 HP cap.

All as per item no. 87 but for 3 HP cap.

Taking out the defective parts of induction motor/turbine motor of capacity 185 HP, 3 phase, 440 Volts and rewinding with super enamelled copper conductor of suitable as per existing size and gauge including varnishing, drying, cleaning of slots, repair to any damage slot, metling to shaft for fixing of bearing and other required work for smooth functioning of motor, testing all as specified and directed.

All as per item no. 95 but for 150 HP cap.

All as per item no. 95 but for 120 HP cap.

All as per item no. 95 but for 40/50 HP cap.

All as per item no. 95 but for 25/30 HP cap.

All as per item no. 95 but for 7.5 HP cap.

All as per item no. 95 but for 5 HP cap.

All as per item no. 95 but for 3 HP cap.

Opening of centrifugal pump set of capacity 185 HP from the base, transporting to work shop, trace out defects and taking out the u/s parts from the pump set, metling, grinding, lathing work as required to make as per original shape and size and fixing the new parts as required complete all as specified and directed by Engr-in-charge. Note : Spares will be measured and paid separately

All as per item no. 103 but for 150 HP cap.

All as per item no. 103 but for 120 HP cap.

All as per item no. 103 but for 40/50 HP cap.

All as per item no. 103 but for 25/30 HP cap.

All as per item no. 103 but for 7.5 HP cap.

All as per item no. 103 but for 5 HP cap.

All as per item no. 103 but for 3 HP cap.

Supply and replacement of Ball Bearing No. 6309/3309 for 185 HP Pump

Supply and replacement of Ball Bearing No. 6309/3309 for 150 HP Pump

Supply and replacement of Ball Bearing No. 6309/3309 for 120 HP Pump

Supply and replacement of ball Bearing No. 6308/6309 for 40/50 HP Pump

Supply and replacement of ball Bearing No. N321 for 150 HP Motor

Supply and replacement of ball Bearing No. N319 for 150 HP Motor

Supply and replacement of ball bearing No 6311/6312 for 40/50 HP Motor

Supply and replacement of ball bearing No 6313/6314 for 25/30 HP Motor

Supply and replacement CI impeller as per existing size and sample, Ist and IInd stages suitable for centrifugal pump set of capacity 185 HP .

All as per item no. 119 but for 150 HP cap.

All as per item no. 119 but for 120 HP cap.

All as per item no. 119 but for 40/50 HP cap.

All as per item no. 119 but for 25/30 HP cap.

All as per item no. 119 but for 7.5/5 HP cap.

M& L for replacement of MS stud with nut complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 125 but for 150 HP cap.

All as per item no. 125 but for 120 HP cap.

All as per item no. 125 but for 40/50 HP cap.

All as per item no. 125 but for 25/30 HP cap.

All as per item no. 125 but for 7.5/5 HP cap.

M& L for replacement of CI sleeve DE/NDE complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 131 but for 150 HP cap.

All as per item no. 131 but for 120 HP cap.

All as per item no. 131 but for 40/50 HP cap.

All as per item no. 131 but for 25/30 HP cap.

All as per item no. 131 but for 7.5/5 HP cap.

M& L for replacement of CI/MS gland packing plate complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 137 but for 150 HP cap.

All as per item no. 137 but for 120 HP cap.

All as per item no. 137 but for 40/50 HP cap.

All as per item no. 137 but for 25/30 HP cap.

All as per item no. 137 but for 7.5 HP cap.

All as per item no. 137 but for 3/5 HP cap.

M&L for replacement of CI bush (stuffing bore bush) complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 144 but for 150 HP cap.

All as per item no. 144 but for 120 HP cap.

All as per item no. 144 but for 40/50 HP cap.

All as per item no. 144 but for 25/30 HP cap.

All as per item no. 144 but for 7.5 HP cap.

M&L for replacement of Housing Sleeve complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 150 but for 150 HP cap.

All as per item no. 150 but for 120 HP cap.

All as per item no. 150 but for 40/50 HP cap.

All as per item no. 150 but for 25/30 HP cap.

All as per item no. 150 but for 7.5 HP cap.

M& L for replacement of pump shaft EN-8 (SS) complete incl key and key groove as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 156 but for 150 HP cap.

All as per item no. 156 but for 120 HP cap.

All as per item no. 156 but for 40/50 HP cap.

All as per item no. 156 but for 25/30 HP cap.

All as per item no. 156 but for 7.5 HP cap.

Repair to motor shaft of capacity 185 HP including check nuts of both side, making bearing sheet complete all as specified and directed.

All as per item no. 162 but for 150 HP cap.

All as per item no. 162 but for 120 HP cap.

All as per item no. 162 but for 40/50 HP cap.

All as per item no. 162 but for 25/30 HP cap.

M&L for replacement for replacement of inter stage CI ring complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 167 but for 150 HP cap.

All as per item no. 167 but for 120 HP cap.

All as per item no. 167 but for 40/50 HP cap.

All as per item no. 167 but for 25/30 HP cap.

All as per item no. 167 but for 7.5 HP cap.

M&L for replacement of cover of motor terminal connection complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 173 but for 150 HP cap.

All as per item no. 173 but for 120 HP cap.

All as per item no. 173 but for 40/50 HP cap.

All as per item no. 173 but for 25/30 HP cap.

All as per item no. 173 but for 7.5/5/3 HP cap.

M& L for replacement of CI/MS coupling complete as per existing sample and size of centrifugal pump set of capacity 185 HP .

All as per item no. 179 but for 150 HP cap.

All as per item no. 179 but for 120 HP cap.

All as per item no. 179 but for 40/50 HP cap.

All as per item no. 179 but for 25/30 HP cap.

All as per item no. 179 but for 7.5 HP cap.

All as per item no. 179 but for 3/5 HP cap.

M&L for replacement rubber bush incl nut,bolts and washers for kirloskar make pump set complete as per existing sample and size of centrifugal pump upto 185 HP cap.

M&L for replacement tyre coupling of size 20/19 Nos complete as per existing sample and size of centrifugal pump set.

All as per item no. 187 but for size 16/15 Nos

All as per item no. 187 but for size 14 Nos

M&L for replacement of hello light packing of 1mm to 2mm for centrifugal pump at the time of dismantling and assembling Make Champion

M&L for replacement of rubber packing sheet 6 mm Thick all as specified and directed.

Supply & fix submersible motor assy of capacity 75 H.P. electric driven, 415 V, 3 phase, 50 Hz with stator including PVC insulated copper winding, stainless steel rotor, bearing, all type of bush, thrust plate terminal,upper and lower housing, casing of motor comprising with arrangement of directly coupled with pump in compatible with below description of pump alongwith submersible cable not less than 5 RM etc complete all as specified and directed by Engr-In-Charge. Make- KSB,Taxmo,Havells, C.G. or its equivalent. [Note:- (i) Items required for motor connection such as PVC insulation tape, valcanised rubber/ puncture tube etc will be provided by the contractor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor.]

Supply & fix submersible pump assy not less than 5/6 stages including bearing, all type of bush, shaft, bowls, thrust bearing, stainless steel impeller, sleeve, sand guard, impeller lock with key, neck ring, 6'' NRV comprising with arrangement of directly coupled with motor in compatible with above description of motor etc having discharge of 1500-1800 LPM or 90-108 Cum/hr at head range more than 90 mtr along with suitable head reducer and tail piece for coupling with column pipe, nut, bolts etc complete all as specified and directed by Engr-In-Charge. Make- KSB,Taxmo,Havells, C.G. or its equivalent.

Supply & fix submersible motor assy of capacity 60 H.P. electric driven, 415 V, 3 phase, 50 Hz with stator including PVC insulated copper winding, stainless steel rotor, bearing, all type of bush, thrust plate terminal,upper and lower housing, casing of motor comprising with arrangement of directly coupled with pump in compatible with below description of pump alongwith submersible cable not less than 5 RM etc complete all as specified and directed by Engr-In-Charge. Make- KSB,Taxmo,Havells, C.G. or its equivalent. [Note:- (i) Items required for motor connection such as PVC insulation tape, valcanised rubber/ puncture tube etc will be provided by the contractor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor.]

Supply & fix submersible pump assy not less than 5/6 stages including bearing, all type of bush, shaft, bowls, thrust bearing, stainless steel impeller, sleeve, sand guard, impeller lock with key, neck ring, 6'' NRV comprising with arrangement of directly coupled with motor in compatible with above description of motor etc having discharge of 1500-1800 LPM or 80-105 Cum/hr at head range more than 85 mtr along with suitable head reducer and tail piece for coupling with column pipe, nut, bolts etc complete all as specified and directed by Engr-In-Charge. Make- KSB,Taxmo,Havells, C.G. or its equivalent.

Supply, installation, testing and commissioning out door type cubical starter panel board made out of CRCA sheet 3 mm thick dust and vermin proof and MS angle of suitable size on PCC 1:2:4 type B-1 platform frame factory fabricated with front door openable system suitable for 3 phase 4 wire 415 Volt, 50 Hz having modern fabrication and followed by powder coat painting complete all as specified and directed .Comprising of the following:- (a) MCCB 415 volts ,3P ,300 Amps 36 KA, Ics=100%Icu (incoming) - 01 No, (b) Contactor 415 volts , MNX 225 - 02 Nos, (c) Contactor 415 volts , MNX 185 - 01 No, (d) Relay, 150-250 Amps - 01 No, (e) Timer, S/D - 01 No, (f) Single Phase Preventer - 01 No, (g) Bus bar chamber with and including Aluminium strips suitable for 300 amps duly mounted on porcelain insulators - 01 Set, (h) Digital Amp meter 3 phase suitable CT's - 01 Set, (i) Digital volt meter 3 phase suitable for 500 Volt - 01 Set, (j) LED Phase indicator R, Y & B- 01 Set, (k) Push button - 02 set, (l) Internal Wiring and connecting the switchgears and accessories.

Supply, installation, testing and commissioning out door type cubical starter panel board made out of CRCA sheet 3 mm thick dust and vermin proof and MS angle of suitable size on PCC 1:2:4 type B-1 platform frame factory fabricated with front door openable system suitable for 3 phase 4 wire 415 Volt, 50 Hz having modern fabrication and followed by powder coat painting complete all as specified and directed .Comprising of the following:- (a) MCCB 415 volts ,3P ,250 Amps, 36 KA, Ics=100%Icu (incoming) - 01 No, (b) Contactor 415 volts , MNX 125 - 02 Nos, (c) Contactor 415 volts , MNX 100 - 01 No, (d) Relay, 100-180 Amps - 01 No, (e) Timer, S/D - 01 No, (f) Single Phase Preventer - 01 No, (g) Bus bar chamber including Aluminium strips suitable for 300 amps duly mounted on porcelain insulators - 01 Set, (h) Digital Amp meter 3 phase suitable CT's - 01 Set, (i) Digital volt meter 3 phase suitable for 500 Volt - 01 Set, (j) LED Phase indicator R, Y & B- 01 Set, (k) Push button - 02 set, (l) Internal Wiring and connecting the switchgears and accessories

Material and pouring of calcium hypochlorite granular (65% to 70%) chemical for using in chlorine dosing pumps of water supply at all water supply installations two times in a day to maintain a reqd standard all as specified and directed.

Repair to grass cutting machine by means of defective worn out parts Note :- Spare parts required will be measured and paid seperately.

Supply & fix Nylon wire 0.3 mm dia for Grass cutting machine.

All as per item no. 201 but Nylone cutter assembly

All as per item no. 201 but Air filter

All as per item no. 201 but Spark plug

All as per item no. 201 but Ignition coil

Demolition of cement concret in ground floor n exc 15 cm thickness complete all as directed by Engr-in-Charge.

M&L Providing cement concrete PCC (1:2:4) type B1 using 20 mm graded aggregate as in cills, courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc including necessary form work etc and making good surfaces as reqd and directed by Engr-in-Charge.

M&L Brick work with Sub Class 'B" bricks straight or curved on plain exciding 6 meter mean radius in cement mortar (1:4) complete all as specified and directed.

M&L for replacment of pressure gauge 0-100 PSI, dial type fixed on pumping line in various pumps all as specified.

M&L for repalcement of existing air release valve made out of brass suitable for pumpset of various capacities all as specified & directed.

Taking down existing indication lamp from panel and S&F LED indicatiion lamp for R, Y & B phase all as specified & directed.

Repair to Sluice valve of 350mm dia from line by means disconnection by opening of nut bolts etc and refixing the same affter replacement of Spindle/Gutka/rubber sheet including lightening of nut bolts etc

All as per item no. 212 but for 300mm dia

All as per item no. 212 but for 200mm dia

All as per item no. 212 but for 150mm dia

All as per item no. 212 but for 100mm dia

Supply and fixing in replacement, CI sluice valve 100 mm bore class PN-1.6 type ISI marked with iron wheel head steel spindle. Confirming to IS - 14846 flanged ends including rubber joints and jointing material all as required at site including any addition alteration for fixing at site including dismantling old unservicable CI sluice valve complete all as directed. Make : Kirloskar / BVI / BIR

All as per item no. 217 but for 150 mm bore

All as per item no. 217 but for 200 mm bore

Supply and fixing CI double flanged Non-return valve 100 mm bore, class 'B', High pressure PN 1.6 conforming to ISI marked, including bolts, nuts, washer and rubber packing all as specified and directed of the following size :- Make : Kirloskar, BVI, Bir

All as per item no. 220 but for 150 mm bore

All as per item no. 220 but for 200 mm bore

Supply and fixing Air realese valve, Double conforming to ISI marked, including bolts, nuts, washer and rubber packing all as specified and directed for suitable size rising main water pipe line :- Make : Kirloskar, BVI, BIR

Repair to foot/ check valve of 200mm dia suction line by disconnecting and opening of nut bolts etc and taking out from under ground Sump and refixing the same affter replacement of leather/Neoprane/rubber sheet including lightening of nut bolts etc. all as specified and directed.

S&F in replacement of foot/ check valve flanged type of 200 dia suction line by disconnecting and opening of nut bolts etc and taking out from under ground Sump etc all as specified and directed.

Repair & overhauling of fully automatic ATS starter of 150 HP of capacity 3 phase 415 volts including rewinding with super enameled copper wire of peoper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed by Engr-in-Charge.

M & L for replacement of copper fix contact large of 150 HP ATS starter Jyoti/LSL make.

M & L for replacement of copper Small Finger of 150 HP ATS starter Jyoti/LSL make.

M & L for replacement of moving contact of 150 HP ATS starter.

M & L for replacement of volt coil of 150 HP starter.

M & L for replacement over load coil of 150 HP starter.

S&F copper base contact of 150 HP starter.

Supply only Starter oil of dielectric strength 45 KV for top up oil of star delta starter complete all as specified and directed.

Repair & overhauling of fully automatic ATS starter of 120 HP of capacity 3 phase 415 volts including rewinding with super enameled copper wire of peoper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed by Engr - in - Charge.

M&L for copper fix contact of 120 HP ATS starter Kilburn /Jyoti make.

M & L for replacement of moving contact of 120 HP ATS starter.

M&L for male and female copper contact (set of three) for Jyoti make oil immersed auto star delta starter for the 120 HP capacity .

S&F in replacement of Heat Resistant Flame Retardant (HRFR) PVC insulated & unsheathed multi stranded copper cable as per ISI marked of size 150 Sqmm, single Core working on 1100 volts, 50 Hz, 415 volts for connecting of pump set to LT Panel bd, all as specified and directed.

S&F in replacement of flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 50 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

S&F in replacement of flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 35 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

S&F in replacement of flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 4 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

S&F 3 pole power contactor MNX 225, 220/440 volts with 225 Amp AC3 duty rating any type including auxillary switch of make: L&T or equivalent in existing panel starter suitable for 120/150 HP motor including taking out of old one all as specified and directed by Engr-in-charge.

S&F 3 pole power contactor MNX 185, 220/440 volts with 185 Amp AC3 duty rating any type including auxillary switch of make: L&T or equivalent in existing panel starter suitable for 120/150 HP motor including taking out of old one all as specified and directed by Engr-in-charge.

S&F 3 pole power contactor MNX 125, 220/440 volts with 125 Amp AC3 duty rating any type including auxillary switch of make: L&T or equivalent in existing panel starter suitable for 60/75 HP motor including taking out of old one all as specified and directed by Engr-in-charge.

S&F in replacement of contactor 415 volts, 63 amps fixed in starter suitable for 40/50 HP motor.

S&F in replacement of contactor 415 volts, 63 amps fixed in starter suitable for 30/25 HP motor.

S&F in replacement of thermal over load relay for auto star delta starter for the 120/150 HP capacity

S&F in replacement of thermal over load relay for auto star delta starter for the 60/75 HP capacity

S&F in replacement of thermal over load relay for auto star delta starter for the 40/50 HP capacity

S&F in replacement of thermal over load relay for auto star delta starter for the 30/25 HP capacity

S&F in replacement of Ammeter, square digital type 0-300 amps with suitable size of CT.

S&F in replacement of volt meter digital type, square type, 0-500 volts with suitable size of CT.

S&F ON and OFF push button flush head type (Red,Green) complete including taking out of old one all as specified and directed by Engr-in-charge.

S&F in replacement of gland packing of size 10 mm to 16mm.

S&F in replacement of MCCB 250 amps, TP 36 KA, Ics=100% Icu in existing panel including taking out of old one Make:-Legrand/C&S/Havells all as specified and directed.

S&F in replacement of MCCB 300 amps, TP 36 KA , Ics=100% Icu in existing panel including taking out of old one Make:-Legrand/C&S/Havells all as specified and directed.

M&L for copper lugs 16 sqmm complete including taking out of old one all as specified and directed by Engr-in-charge.

M&L for Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, connected with GI strip 25x4mm by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI strip is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the equipment. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm all as specified and directed by Engr-In-Charge and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

Material and Labour for Mild Steel ERW (Electro Resistance Welded) pipe with flanged ends suitable for Column Pipe of bore dia 150mm,8 mm wall thickness including gasket, bolts and nuts for fixing and taking out of old pipes complete all specified and directed by Engr-in-Charge. [Note: The pipes should be in 3.0 mtr length with both side flanged suitable for column pipe for Bore well]

S&F in replacement of single phase preventer relay of capacity 0-240 amps, with adjustable time delay 30 sec to 5 min suitable for 415 volt AC, any type including internal wiring from switchgear to relay in existing panel including taking out of old one all as specified and directed.

M&L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out including forming bottom surface etc in loose/soft soil complete all as specified and directed.

Taking of water sample, from tubewell and location indicated by Engr- in Charge and carried out Physical, Chemical and Becteriological test from Authorised govt institute/Branch complete all as specifid and directed

Attending complaint for rectification of leakage in 200 mm bore CI/DI/MS pipe line with run lead joints/ push on/ flanged joints complete by lead pig & spun yarn /rubber gasket or flange spigot and socket fitting, any bend or tee, D joint, MJ collar including necessary nut bolts & washers etc including excavation for any lenght of pipe by using labour as well as returning,filling complete all as specified and directed by Engr-in-charge.

All as per item No. 263 here-in-before but 150 mm bore.

All as per item No. 263 here-in-before but 100 mm bore.

Attending complaint for rectification of leakage of 80/100 mm bore GI Pipe line including excavation, returning and filling, screwing and threading etc including fittings like unions, sockets, bends, elbows, tees, nipples,clamp with socket welded etc as per site requirement and complaint shall be rectified within 24 Hrs from date of complaint complete all as specified and directed by Engr-in-charge.

All as per item No. 266 here-in-before but 50/40 mm bore.

All as per item No. 266 here-in-before but 25 mm bore.

All as per item No. 266 here-in-before but 20 mm bore.

All as per item No. 266 here-in-before but 15 mm bore.

Taking out 15 mm bore steel water tubing including fittings complete all as specified and directed by Engr-in-charge. (Note- Excavation & earth work shall be measured and paid separately)

All as per item no. 272 but for 20 mm bore.

All as per item no. 272 but for 25 mm bore.

All as per item no. 272 but for 40 mm bore.

All as per item no. 272 but for 50 mm bore.

Refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) including cleaning of pipes of 15mm bore complete all as specified and directed by Engr-in-charge.

All as per item no. 277 but for 20 mm bore.

All as per item no. 277 but for 25 mm bore.

All as per item no. 277 but for 40 mm bore.

All as per item no. 277 but for 50 mm bore.

S&F of 15mm bore GI pipe medium grade with all fittings and fixtures complete fixed to wall/ceiling or laid in floor /trenches etc. complete all as specified and directed by Engr-in-charge. (Note - Excavation & earth work shall be measured and paid separately)

All as per item no. 282 but for 20 mm bore.

All as per item no. 282 but for 25 mm bore.

All as per item no. 282 but for 40 mm bore.

All as per item no. 282 but for 50 mm bore.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exc.1.5 mtr in depth for taking/laying of CI/GI pipe and getting out including forming bottom surface etc in loose/soft soil complete all as specified and directed.

Returning filling in same earth in trenches including spreading leveling watering and well ramming in layers not. Exc. 25cm thick any type of soil after the pipe laid all as directed.

Removing of excavated soil n. exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting points in soil complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Please Enable Macros to View BoQ information