Renovation and Repair of School Complexes located in Panchmahal, Dahod and Chhotaudepur Districts, Gujarat.

Name of Work : Renovation and Repair of School Complexes located in Panchmahal,

Dahod and Chhotaudepur Districts, Gujarat.

Package No. : GITEP-93

BILL OF QUANTITIES

Memorandum showing item of works to be carried out

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Demoli on of Brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and li .(ii) In

Dismantling led of stone floors laid in mortar

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

Demoli on including stacking of serviceable materials

3 and disposal of unserviceable materials with all lead 245.87 Cu. Mt. 1108.12

and li . (i) R.C.C. work

Excava on for founda on up to 1.5 m depth

including sor ng out and stacking of useful

materials and disposing off the excavated stuff up to

50 Meter lead.(A) Loose or so soil

Excava on for founda on up to 1.5 m depth

including sor ng out and stacking of useful

materials and disposing off the excavated stuff up to

50 Meter lead.(B) Hard & Dance soil

Excava on for founda on upto 1.5 m depth including

sor ng out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(D) So rock not requiring Blas ng

Excava on for founda on upto 1.5 m depth including

sor ng out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(E) Hard Rock

Filling in founda on and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolida ng etc. complete.

Lead from up to 5.00 KM Lead.

Caring out plinth treatment to post construc on /

exis ng structure by spraying chemical solu on for

termite control treatment including labour and

material consistent with I.S.I specifica on. Using

Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-

II Concentra on Weight one percent is recommended

i.e. one litre 20 EC chemical emulsion with 19 liAer

give 1 % concentra on inclusive of one litre chemical

emulsion applica on at the rate of 5 Litre chemical /

Sq. Mt. of surface is recommended as per I.S

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone

10 aggregates 40 mm nominal size) and curing complete 2679.73 Cu. Mt. 2679.92

Including cost of formwork in (A) Founda on and

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Providing and laying controlled cement concrete

M.150 for curing complete including cost of formwork

11 and reinforcement for reinforced concrete work in (A) 676.85 CMT 3958.25

Founda ons, foo ngs,Base of columns and Mass

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

12 formwork and excluding the cost of reinforcement for 965.61 Cu. Mt. 4773.26

reinforced concrete work in (A) Founda ons, foo ngs,

Base of columns and Mass concrete. At any height

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

13 formwork and excluding the cost of reinforcement for 281.86 Cu. Mt. 8267.86

reinforced concrete work in (D) Columns, Pillars posts

and struts, wall At any height

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and excluding the cost of reinforcement for

reinforced concrete work in ©

Slabs,landing,shelves,Balconies, Lintels, Beams,

Girders and Can lever upto floor two level.

Providing ISI mark T.M.T. bars Fe 500 / fee 500D

reinforcement for R.C.C. work including bending,

binding and placing in posi on complete for Up to all

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

in founda on and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(A) Modular

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

17 in superstructure above plinth level upto any height 732.45 Cu. Mt. 4457.55

in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A)

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse

sand ) with 2 Nos of 6mm Mild steel round bars a er

every three course embedded in Cement Mortar in

Any height (A) Modular

Providing and fixing 35mm thick flush door shuAers,

solid core construc on with frame of first class hard

wood with cross band and face veneer or plywood

face panels and wood polished Teak wood beading to

door shuAer iron plug screws plugs and priming coat

on unexposed surface and laminated with 1.0 mm

thick high pressure laminated Sheet of Plain / Wood

Grain in Gloss/ MaA finish with high density

protec ve Surface layer and reverse side of adhesive

bonding quality confirming to IS 2046 including cost of

Adhesive of approved quality and with C P Brass

fixtures and fastenings ( Hinges, handles,

secrews,Aldrop and latches etc. of approved make)

and fixing in exis ng frame with 15cm long hold fast

of 20x5mm 6 no's and 12mm square spacer bars as

per drawing with three coats of oil pain ng and also

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

removing of exis ng door if required. complete as per

instruc on of engineer in-charge

Providing and fixing FRP Frame size 100 x 50 mm and

28 mm thick FRP depress panel shuAer having extra

reinforcement on sides and edges and in gel coat

finish. The core of the shuAer is to be filled up with

injected fire retardant grade polyurethane foam done

in situ along with embedded wooden places for

iffening and also for taking hinges and fixture. The

20 wholeFRP frame and shuAer is to be water proof, 798.03 Sq. Mt. 2377.76

weather proof, termite proof and resistance to mild

acid/Alkali. Rates are inclusive of S S hinges with

necessary screws and aluminium fixtures and

fastening. Products should have 3 years performance

guarantee and company have ISO9001-2000

cer ficate. Removing of exis ng door if required.

complete as per instruc on of engineer in-charge

Providing and fixing window having extruded

aluminium Colour anodized sec on frame main outer

size 95mm x 24mm x 1.17mm (of Jindal Sec on

no:2459 @ wt. Of 0.738 Kg/MT), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of

Jindal Sec on no:8688,@ Wt.1.07 Kg/MT), ver cal

member of size 92mm x 31.75mm x 1.50mm (of Jindal

Sec on no:8933,@ Wt. 1.06 Kg/MT) with sliding

shuAers of horizontal member size 40 mmx18mm

x1.29mm (of Jindal Sec on no:8947@ wt. Of

21 Kg/MT), ver cal member of size 40mm x 18mm x 1.29 259.20 Sq. Mt. 1583.95

mm (of Jindal Sec on no:8949 @ wt. Of 0.456Kg/MT/

with Two Track of 5 mm thick transparent bronze

colour nted float glass & one track of Mosquito net

wire gauge shuAers using galvanized M.S. wire gauge

of average width of aperture 1.4 mm in both

direc ons with wire of dia 0.63 mm of with powder

coated aluminium fiNngs and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. Removing of exis ng window if required.

complete as per instruc on of engineer in-charge

Providing and fixing window having extruded

aluminium Colour anodized sec on frame main outer

size 63.50 x 38.10 x 1.95 mm(of Jindal Sec on

no:4605,@ Wt 1.094 Kg / R. Mt.), horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm (of

Jindal Sec on no: 8687 @ wt. Of 0.695 Kg/MT),

ver cal member of size 61.85 mm x 31.75mm x

mm (of Jindal Sec on no:8758 @ wt. Of 0.0.659

Kg/MT) with sliding shuAers of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Sec on

no:8949 @ wt. Of 0.456Kg/MT), ver cal member of

size 40mm x 18mm x 1.29mm (of Jindal Sec on

no:8947 @ wt. Of 0.456Kg/MT/ Sec on 8948, @ Wt.

0.457 Kg/MT) with 5 mm thick transparent bronze

colour nted float glass with powder coated

aluminium fiNngs and fixtures and transparent silicon

sealant glass fixing to frame as per details etc.

complete for window. Removing of exis ng window if

required. complete as per instruc on of engineer in-

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Providing and fixing standard extruded of aluminium

sec on of size 63.50 x 38.10 x 1.95 mm(of Jindal

Sec on no:4605, @ Wt. 1.094Kg / R. Mt. with colour

anodized aluminium frame with 5 mm thick

23 transparent bronze colour nted float glass with 11.52 Sq. Mt. 1301.82

colour anodized aluminium frame for ven la on with

5 mm thick frosted glass as details etc. complete for.

Window. Removing of exis ng window if required.

complete as per instruc on of engineer in-charge

Providing & Fixing of standard extruded of aluminium

sec on of size 63.50 mm x 38.10 mm x 1.95 mm

(Jindal Sec on No.4605 @ wt. 1.094 kg per MT ) with

colour anodized aluminium frame with Fly proof

24 galvanised M.S. wire gauge of I.S.l gauge designa on 4728.86 Sq. Mt. 1931.12

85 G. with wire of dia.0.56 mm as per details etc.

complete for Fixed Windows. Removing of exis ng

glass/louvers etc if required. complete as per

instruc on of engineer in-charge

Providing and fixing standard extruded aluminium

Openable Doors with part 5mm thick plain glass and

part 12mm thick par cle board with powder coated

door sec on frame of approved shade & shuAer

fabricated from aluminium standard sec on for outer

frame size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

R. Mt. and door shuAer ver cal, horizontal and middle

of 85mm x 44.45mm x 2.7mm @1.843 kg/rmt

including providing rubber gasket and beading clips

(@ wt. 0.124 Kg / R. Mt.) also inside including

providing handle / locking arrangement, brackets etc

accessories fiNngs with silicon and all required

supports, materials labour and equipment's as per

directed by the engineer in charge

Providing and fixing 5 mm thick frosted/obscured

glass (one side etched) in exis ng aluminium frame /

wooden frame / MS sec on, including providing and

fixing rubber gasket or wooden beading as required,

26 along with all necessary fiNngs, screws, sealant and 680.58 Sq. Mt. 776.69

accessories for proper fixing and finishing of glass

beading, Removing of exis ng glass/louvers etc if

required. complete as per instruc on of engineer in-

Steel & Grill work, welded in built up sec ons framed

work including cuNng, hois ng, fixing in posi on and

applying a priming coat of read lead paint. (A)In

beams and joists, channels angles Tees, flats, with

27 connec ng plates or angle cleats as in main and cross 109102.20 Kg. 91.08

beams. Hip and jack ra ers, purlins connected to

common ra ers complete as required as per the

drawings and as per the instruc on of engineer in-

Providing 20 mm thick double coat mala cement

plaster on interior brick/ concrete work for plastering

comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement

mortar 1:2 ( 1 Cement : 2 coarse sand) finished with

trovel including scaffolding curing etc. complete. for

All Floor level

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

20 MM thick sand faced cement plaster on walls up to

height 15 MT's aboveground level consis ng of

29 MM thick backing of coat CM 1:3 (1 cement : 3 sand ) 8818.02 Sq. Mt. 353.98

and 8 MM thick finishing coat of CM 1:1 (1 cement :

sand ) etc. complete Gutka Finish

Providing 10mm thick cement plaster in single coat

for plastering on ceilings and soffits of stairs and

finish even and smooth in C M 1:3 (1 cement

coarse sand) for all floor

Filling cracks in plaster by opening the crack, removing

loose material, cleaning the surface free from dust,

applying acrylic/latex crack filler / white cement based

puAy/approved bonding agent, sanding smooth and

31 making surface ready for pain ng, finishing smooth to 303.00 R. Mt. 52.52

match adjacent surface, curing as directed, complete

in all respects including scaffolding, tools, labour and

materials. complete as directed by Engineer-in-

Wall pain ng (two coats) with plas c emulsion paint

of approved brand and manufacture on undecorated

32 wall surface to give an even shade including throughly 209425.30 Sq. Mt. 84.82

brushing the surface free from mortar droppings and

other foreign maAer and sand papered smooth.

Providing & applying Wall pain ng with ( Two Coats)

with Plas c Emulsion Paint of Approved brand and

manufacture on undecorated wall surface to give an

even shade including thoroughly brushing the surface

free from mortar dropping and other foreign maAer

and making smooth by levelling the surface with

approved wall puAy ( Birla or Equivalent), applying

two coat of primer & then applying two coats of

plas c emulsion paint. Cost should be inclusive of

supply & applica on of PuAy & Primer , scaffolding

remove the dirt, making the surface clean etc.

Wall pain ng with weather proof acrylic emulsion

paint of approved brand & manufacturer and of

required shade of exterior wall surface to give an even

34 shade over and including a priming coat of approved 11668.77 Sq. Mt. 143.42

brand a er thoroughly brushing the surface to

remove all dirt and remains of loose powdered

material etc. complete for all heights.

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

35 shape even shade a er thoroughly brushing the 125447.48 Sq. Mt. 122.14

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing and applying high build elastomeric acrylic

waterproof exterior wall coa ng on exis ng heritage

plastered wall surface, including cleaning of surface,

removal of dust, loose par cles, minor crack filling and

necessary surface prepara on, and applying

minimum two coats of waterproof protec ve coa ng

to achieve uniform finish complete as per

manufacturer specifica ons. The coa ng shall provide

weather resistance, UV protec on and crack-bridging

proper es. The final colour shall be matching the

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

exis ng colour or as directed by the Engineer-in-

Charge, including all labour, materials, tools,

scaffolding and complete in all respects.

Applying priming coat over new/exis ng steel and

other metel surface a er and including preparing the

surface by throughly cleaning, oil, grease, Exis ng

paint, dirt and other foreign maAer and scoured with

brushes fine steel wood, scrapers and sand paper with

37 ready mixed priming paint brushing red lead. Pain ng 20601.35 Sq. Mt. 138.78

two coats on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign

Providing and laying Kota stone slab flooring, risers

and steps of steps, dedo and pillars over 25mm

(average thick base of cement mortar 1:6(1cement :

coarse sand) or L.M.lime mortar 1:1.5 laid over and

jointed with grey cement including rubbing, Smooth

polishing and removal of exis ng les/flooring,

cleaning, removal of mortar etc. complete.---25m.m

P & L 24" x 24" vitrified 8 mm thick le flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

exis ng flooring by adhesive material including

39 dismantling of exis ng flooring and jointed with color 4550.65 Sq. Mt. 1472.91

cement slurry including finished with flush poin ng &

cleaning the surface, and removal of exis ng

les/flooring, cleaning, removal of mortar etc. etc.

complete for an skit

Providing and laying Ceramic Tiles 6 mm thick in

flooring, skir ng, dedo, treads, of steps & landing laid

on a bed of 12 mm thick Cement Mortar 1:3(1Cement

: 3 Coarse sand) finished with flush poin ng in white

cement. Including removal of exis ng les/flooring,

cleaning, removal of mortar etc.

Providing and laying chequered precast cement

concrete les 22mm thick with aggregate of sizes upto

6mm in floors, treads of steps and landings on 20mm

41 thick bed of C.M. 1:6 (1-cement : 6-sand) or L.M. 11.25 Sq. Mt. 545.76

1:1.5(1-Lime puAy : 1.5 coarse sand) joint with neat

cement slurry with pigments to match the shade of

Providing and fixing machine moulded aluminium

covering of approved paAern & design, made out of

machine cut aluminium sheet (170 mm width and

mm thick) and machine holed for receiving dash

fastener, over expansion joints on ver cal

surfaces/ceiling floors, the fixing on plate in one row

42 on one side of joint only shall be done with stainless 36.00 R.Mt. 919.10

steel dash fasteners of 8 mm dia and 75 mm long bolt

including providing aluminium washers 2 mm thick &

15 mm dia , at a staggered pitch of 200mm centre to

centre including drilling holes in the receiving surface

and providing expandable plas c sleeves in holes etc.

complete as per direc on of Engineering-charge.

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Items including the removal of the exis ng expansion

joint material. Filling the gap in between aluminium

frame & adjacent RCC/ Brick/ Stone work and filling

the expansion joints for 50 mm width & 12mm depth,

with polysulphide sealant with applica on of primer

including scraping/removing the expansion filler

materials from joints, cleaning, repairing of the edges

with epoxy mortar of approved color and make and

below expansion joint by providing weather silicon

sealant over backer rod of approved quality as per

architectural drawings and direc on of Engineer-in-

charge complete.

Providing and lying cement based waterproofing on

roofs with a minimum slope of 1:100 and average

thickness of 100 mm using brickbats of appropriate

size and shape suitable to achieve the required slope

laid over 15mm thick waterproof cement mortar 1:4

on well prepared/cleaned RC roofs with joints

between brickbats thoroughly grouted with

waterproof cement mortar 1:4 and finished with

mm thick waterproof. plaster using cement mortar

1:4 and making false squares of 300 mm size including

rounding of the junc on of roof and parapet walls for

a height of 300 mmm with brickbats ND 20mm thick

waterproof plaster and conduc ng necessary

leakage/dampness tests, furnishing ten years

guarantee etc. all complete as directed.

(waterproofing admixtures shall be of approved

quality and dosage as recommended by the

manufacture - polymer modified cemen ous

waterproof slurry mortar consis ng of liquid polymer

and a cement base mix and water proofing compound

conforming to IS 2645 or Equivalent As Approved By

Engineer in charge) Providing &laying the flooring of

broken china-mosaic (Brocken pieces of china glazed

les)white set in 25 mm, average bed of cement

mortar 1:3 with waterproofing compound to correct

level and slope(1:100) well compacted and finished;

such that minimum coverage of china mosaic chips is

about 90% of the total area of slab. The above

treatment shall con nue along the inner side of

parapet or the adjoining wall up to 30cm. height as

per the above specifica on.. Special Agency to be

occupied and Warranty Of 10 year . 100rs Bond paper

to be submit by Contractor. and on laAer head

SubmiAed By Executed Agency

Providing and Laying Cement Concrete Flooring 1:2:4

( 1-Cement, 2 Coarse Sand, 4 Graded Stone Aggregate

20 mm Nominal size ) laid in one layer finish with

Floa ng Coat of neat cement (B) 50mm thick

Providing and applying water proofing for toilets with

ver cal walls of toilet and sunck por on all

inclusive(bbc, IPS,grou ng) with 2 coats two

components acrylic polymer modified elastomeric

cemen ous water proof membrane coa ng

(polycoat BB) on depressed/sunken slabs which shall

be mixed as per manufacture's technical specifica on,

a er throughly cleaning the surface by mechanical

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

means to making it free of any loose mortar, unsound

substrate, "v" grooves cut along the construc on

joints, cracks and joints of slab /wall on the external

face and same shall be filled with polymer modified

mortar (CM 1:3 mixed with approved water proofing

compound (polymer modified cemen ous

waterproof slurry mortar consis ng of liquid polymer

and a cement base mix and water proofing compound

conforming to IS 2645 or Equivalent As Approved By

Engineer in charge) in the propor on recommended

by the manufactures, cracks in the slab (if any),

pressure grou ng pump with a pressure of 3 to

kg/sqm, strictly maintain the coverage specified by

the manufacture , applica on of 20 mm thick plaster

with water proofing compound (AW Plus) in cement

mortar 1:4 over the water proofing treatment.

Including cost . Special Agency to be occupied and

Warranty Of 05 year . Bond paper to be submit by

Executed Agency and Contractor.

Construc ng PlaSorm with fixing granite stone (As

per the design) 18 mm thick laid on Polished Kota

Stone 25mm th. , Provision of Polished Kota Stone

Shelf and Sandwich Polished kota stone Support,

Granite Facia PaN as per Drawing including rubbing

Polishing and Making the surface level and Clean etc.

Completed (Only Top Surface Area of PlaSorm shall be

considered for Measurement & Payment)

Providing and laying Granite Slab 18 mm thick in

flooring ,treads Ceel jams of steps and landing laid on

a bed of 12 mm thick cement mortar 1 :6 (1 cement :6

coarse sand) finished with flus poin ng in white or

colour cement With Half Round Mould as Director by

Architect and Engineer In Charge..

Providing and fixing PVC Printed pain colour false

ceiling with grid type with aluminium frame consis ng

of 600mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized

aluminium T sec on of size 1 x 1 (235 x 25mm,

gauge or 1 mm thick) in square paAern of grid sizes of

2 x 2 (600 x 600mm) The aluminium frame work is Sq.

supported from the ceiling with the help of G.I. hook Mt.t

and G.I. wire/6mm M.S. rods of required sizes to

maintain proper level etc. The aluminium frame work

is supported on side wall with the use of aluminium L

sec on of size 1 x 1 (25 x 25mm) angles etc. complete

as per direc on of Engineer in charge. Manufactures

specifica on and drawing.

Providing and fixing 1.80 mm thick FRP (Fiber

Reinforced Plas c) sheet, of approved make and

quality, including cuNng to required size, drilling,

49 fixing with suitable self-drilling screws, washers, and 35.00 251.00

sealant wherever required, complete in all respects as

per site requirement and direc on of engineer-in-

Providing and fixing barbed wire fencing over

New/exis ng compound wall using MS Y-shaped

angle posts of size 40×40×6 mm, fabricated and oil

pain ng 3 coats fixed at 2.5 Mt,C/c, including Fixing in

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

RCC/brick wall with base plate. The work includes

supplying and fixing with five Horizontan lines and

two diagonals of galvanised steel barbed wire

weigh ng 9.38 Kg. per 100 Metre, properly stretched,

tensioned, and secured with GI binding wire, staples,

hooks, or suitable fasteners as directed by engineer in

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block /paver block 60mm thick

with grade of concrete M300 pneuma c compressed

/ vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidelines of IRC : SP 63-

2018 etc. Complete.

Providing and fixing Pre cast kerb stone of grey

cement based concrete block of 600mm comes in

length , 300mm comes freight and 150mm comes

52 thick of M200 grade concrete a per approved design 851.00 R. Mt. 412.13

and including excava on for fixing in proper line and

level, filling in joints with C.M 1:3( cement : 3Sand)

Clothes hanging hooks - having six pins in Stainless

steel S type 6 pin cloth hanger door/wall hooks rail

with minimum weight of 300 grams and as per

approval of engineer in charge

Providing and Fixing S.S. Handle for Door 15 Cm size of ASIS

54 304 Grade including removing of exis ng fixtures if required 382.00 Each 60.26

as per instruc on of engineer in-charge

Providing and Fixing S.S. Aldrop 30 Cm long of ASIS

55 Grade. including removing of exis ng fixtures if required as 382.00 Each 440.63

per instruc on of engineer in-charge

Providing and Fixing S.S. Stopper 30 Cm long of ASIS

56 including removing of exis ng fixtures if required as per 350.00 Each 200.55

instruc on of engineer in-charge

Providing and fixing S.S. Railing pipe 50 mm x 16 G ASIS

57 Grade as per the direc on of engineer in-charge and 39.10 R.Mt. 1115.71

Supplying of graded stone aggregate of following sizes

58 (for W.B.M. Road)(3) Crushed stone aggregate for 69.00 Cu. Mt. 358.30

Hard Quality up to 63 mm size

59 Supplying of murrum / binding materials 45.00 Cu. Mt. 77.09

Spreading the stone aggregate for rolling and W.B.M.

including filling the inters ces to required camber and

gradient (excluding spreading of Blindage)(ii) upto

63mm size aggregates

Spreading blindage or road crust filling the gaps in

61 metal and levelling to camber and gradient as 45.00 Cu. Mt. 158.53

Rolling and consolida on of soling including filling in

62 depressions which occurs during the process with 300.00 Sq. Mt. 22.75

power roller 8 tonne to 12 tonne

Providing expansion joint in RCC road slab including

required material & labour & filling the 80/100 grade

63 asphalt/bitumen including hea ng filling in joint 12.00 R. Mt. 60.60

cleaning the joint before filling with Asphalt\bitumen

finishing smooth at top etc. complete

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Applying vacuum dewatering procedure to RCC Road

64 slab flooring by using vibra ng screed, vacuum pump, 300.00 Sq. Mt. 80.80

suc on mat, filter pads & other required accessories

65 Longitudinal Joint 10mm x 25mm cuNng 110.00 R. Mt. 30.30

Earthwork for embankment including breaking clods,

dressing with all lead and li and including watering

rolling and consolida on of subgrade in layers at

66 O.M.C. to required dry density including filling the 6378.47 Cu. Mt. 182.14

depression which occur during the process using

power roller 8T to 10T.(E) From Borrow area within

Providing and installing and fixing free floa ng

resilient wooden sports flooring system for Basket ball

court, including kiln -seasoned, finished and treated

imported mbers ( hard maple/oak wood ) having

20mm thickness,57 to 83 mm width and in random

lengths in tounge and groove joinery having boAom

side with air pass groove and applied with an -

termite lacquer, including the under frame made up

of imported pine wood runners of 63mm X 44 mm

67 treated with special an -termite solu on and fixed on 20.00 Sq.Mt. 7592.96

the boAom side with 8mm thick bio-cushion pads by

staple/nailing through the two wings at 250 mm c/c,

complete with machine sanding a er installa on four

mes with drum sanding machine and using fine

grade sand papers of different grades, finishing with

imported DIN cer fied Spor ve sealer and non-skid

Spor ve water based Polyurethane lacquer, game line

markingin required colour and applying finish coat

lacquer etc. as directed by E.I.C.

Providing corrugated G.I. sheet of class-3 roofing fixed

with galvanised iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete

excluding the cost of purlins, Ra ers and Trusses.(1)

0.80 mm thick sheet.

Providing and laying in trenches galvanized MS tube

(Medium grade) of following nominal bore and tube

fiNng (Earth work in trenches to be measured and

paid for separately) of 80 mm

Providing and laying in trenches galvanized MS tube

(Medium grade) of following nominal bore and tube

fiNng (Earth work in trenches to be measured and

paid for separately) of 65 mm

Providing and laying in trenches galvanized MS tube

(Medium grade) of following nominal bore and tube

fiNng (Earth work in trenches to be measured and

paid for separately) of 50 mm

Providing and fixing in trenches 10 kg/cm2 working

pressure polyethylene pipes of following outside

72 diameter , low density complete with flange 4716.40 Meter 342.39

compression type fiNngs, supports, etc. complete

Providing and fixing PVC. gully trap with C.I. gra ng

73 brick masonry chamber and water ght C.I. cover with 14.00 Each 1246.92

frame of 300mmX300mm size (inside) with standard

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

weight. I) Square mouth traps. a) 150mmX110mm size

Construc ng Manhole with R.C.C. top slab in 1:2:4 mix

(1-cement : 2-coarse send : 4-graded stone aggregate

20mm nominal size) founda on concrete 1:3:6 mix (1-

cement : 3-coarse sand : 6- Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement a) With

230mm thick walls of brick masonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement : 5- Coarse sand) (I)

Inside size 900mm X 1200mm and 1.5M. deep

excluding C.I. cover & frame & including CI steps as per

specifica ons (1) A type depth 0.90 -1.5 Meter for

mm diameter sewer.

Providing and construc ng SOAK WELL of 2.50m

internal dia and 5.00 depth depth internal clear

dimension including the cost of execava on,PCC 1:4:8

founda on for honey combed masonry in C.M. 1:4

(1cement : 4 sand) , cas ng R.C.C. 1:2:4 (1cement :

sand : 4 graded stone aggregate 20mm nominal size)

75 top slab 12 thick with C.I. manhole cover 600mm x 3.00 Each 88892.12

450mm size of 35 kg. weight and 75mm dia C.I. pipe

1800mm long with 75mm dia cowl vent and filling the

wall 1000mm in depth with dry brick bats including

providing vata in C.M. 1:3 (1cement : 3 sand), curing

including cost of reinforcement etc. complete as per

detailed drawing and directed by E.I.C.

Construc on Sep c tank inside dimension of 6 m in

length & 3 m in width & 3 m depth including

excava ng any type of soil as shown and men oned in

the drawing, providing and laying 0.10 m thick plain

cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

graded stone agg.) 40 mm thick IPS flooring at boAom

with brick masonry 0.23 m thick walls CM 1:5 (

cement : 5 coarse sand ) and intermediate par on

CM 1:4 & RCC Top slabs12 comes thick in 1:2:4 (1

cement : 2 coarse sand : 4 graded stone agg) including

reinforcement as per design and 15 mm thick cement

plaster in CM 1:4 with floa ng coat of neat cement

slurry inside, top and around tank below 15 cm on

ground level, Also provide Two nos CI Manhole frame

and cover of size 60 cm x 45 cm & 75 mm dia. PVC

kgf / Sq cm pressure air vent pipe in 3.00 length with

cowl etc. complete as per direc on of Engineer in

Providing & erec ng open well horizontal mono block

pump set with cast iron body, complete for three

phase submersible motor having [A] For 3 HP 3 phase

open well horizontal mono block pump set suitable

for 85 to 270 LPM @ 20 mtr head suitable for 40 mm

dia delivery pipe (Cat-II)

Providing lying and join ng in true line and level

mm dia. U.P.V.C. Pipe (as per ASTM D 1785 SCH - 40)

line including fiNngs make or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or shall

be connected as directed including tes ng of pipe and

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing lying and join ng in true line and level

mm dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs

make or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be connected

as directed including tes ng of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

Providing lying and join ng in true line and level

mm dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs

make or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be connected

as directed including tes ng of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

Providing lying and join ng in true line and level

mm dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs

make or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be connected

as directed including tes ng of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

Providing lying and join ng in true line and level

mm dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs

make or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be connected

as directed including tes ng of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

Providing & Fixing PVC SWR Nahni Trap IS 14735 for

drain - 100 mm diameter with jali of 150 mm diameter

with self cleansing design with CI scread down or

hinged gra ng including cost of cuNng & making the

good walls. Work including the removal of exis ng

Nahni trap and cleaning of area if required.

Providing and fixing wash down water closet (

European type, WC pan) with integral P or S trap

including join ng the trap with soil pipe in cement

mortar 1:1 (1 Cement : 1 fine sand) ( Seal and cover to

be measured and paid for separately)

A) Vitreous China, white colour

Providing and fixing vitreous china Anglo Indian type

water closet with solid plas c seat & lid fixed with CP

brass hinges, rubber buffer with all civil work making

the good floor A) Vitreous China, white colour

Providing and fixing water closet squaNng pan (Indian

86 type WC) size 580 mm (A) Vitreous China long paAern 6.00 Each 1019.19

Providing and fixing chromium plated brass half trun

87 flush cock of approved quality including fixing in pipe 584.00 Each 254.78

line etc. complete.(ii) 25mm dia.

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Providing & fixing of Hand Shower (Health Faucet),

88 ABS body, 1 R. Mt. Long pvc Tube and Wall Hook 640.00 Each 853.45

accessories to complete the item.

Providing & fixing in posi on 15 mm C.P. brass 2 way

bib cocks of best quality

Providing and fixing plas c seat and cover for wash

90 down water closet with C.P. brass hinges and rubber 153.00 Each 291.33

buffers A) Black plas c seat and cover

Providing and fixing pillar tap, capstan head, screw

91 down high pressure with screws, shanks and back 37.00 Each 308.73

nuts. (i) 15mm dia.

Providing and fixing flat back wash basin of size

mm × 400 mm made of white vitreous china, including

brackets, waste coupling, necessary fiNngs,

connec on to inlet and outlet pipes, cuNng and

making good the wall, complete in all respects as

directed by the Engineer-in-Charge.

Providing and fixing brass screw down stop tap.(B)

Providing and fixing 600mmX450mm bevelled edge

mirror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden plug

with C.P. brass screws and washers.

Providing and fixing of screwed down bib taps of

95 following size Brass Chromium plated Bib tap of 15 570.00 Each 186.83

Providing & fixing Urinal of approved quality including

connec ng Urinal with waste pipe, tap etc. Complete.

(A) White earthenware flat back/corner type ize

430mmx260mmx350 mm

Providing and fixing Waste Pipe for Wash basin/Urinal

Providing and fixing gun metal check or non return full

way wheel valve of 40 mm

Providing and fixing gun metal full way wheel valve of

Providing erec ng and fixing double coated ISI water

100 tank of required capacity each with all necessary 82000.00 LTR 3.95

fiNngs and connec on etc. complete on terrace

Supplying, installing, tes ng & commissioning of

SOLAR WATER hea ng system as per prevailing IS code

comprising of Solar flat locket collector, stainless steel

hot water storage isolated tank with S.S. heat

exchanger, absorber made of copper sheet & copper

tube of following capacity in liter / day (LPD) with "B"

size aluminium box collector with appropriate

capacity electrical backup arrangement (Excluding

inlet & outlet pipe lines) [A] Capacity of 1000 LPD (i.e.

Providing & erec ng water cooler with inbuilt RO &

having storage tank capacity 80 Ltr. & cooling capacity

40 Ltr.per hour @ an ambient temp of 45 deg C. The

outlet temp. of the water should drop by 15 deg C

within a hour, The water cooler should be comprising

of herme cally sealed compressor, fan motor,

condensing unit, water tank surrounded by

evapora ng, coil, thermostats, relay etc.complete

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

with necessary inlet & outlet connec on. The body of

water cooler will be made from Stainless Steel. The

scope shall cover inbuilt reverse osmosis plant of

ltr./hr purifica on capacity

Providing & erec ng water cooler with inbuilt RO &

having storage tank capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of

deg C. The outlet temp. of the water should drop by

15 deg C within a hour, The water cooler should be

comprising of herme cally sealed compressor, fan

motor, condensing unit, water tank surrounded by

evapora ng, coil, thermostats, relay etc.complete

with necessary inlet & outlet connec on. The body of

water cooler will be made from Stainless Steel. The

scope shall cover inbuilt reverse osmosis plant of

ltr./hr purifica on capacity

Providing, supplying, installing and commissioning

Fully Automa c Electronic Sanitary Napkin Vending

Machine, Nakshatra Technology Stay happy make or

equivalent approved, coin-operated type, wall

mounted / free standing, with storage capacity of

minimum 100 sanitary napkins, compact and robust

design, fabricated from durable material, suitable for

ins tu onal use, complete with all internal

mechanisms, electrical components, moun ng

accessories, tes ng and commissioning, complete as

per specifica ons and direc ons of Engineer-in-

Providing, supplying, installing and commissioning

Wall- Mounted Automa c Sanitary Pad Disposal Unit

/ Sanitary Waste Burner, Nakshatra make or

equivalent approved, eco- friendly, energy-efficient

and safe incinerator, suitable for disposal of used

105 sanitary napkins, medium capacity, complete with 8.00 Each 12776.50

insulated combus on chamber, temperature control,

ash collec on tray, electrical connec ons, moun ng

accessories, tes ng and commissioning, complete as

per specifica ons and direc ons of Engineer-in-

Preparing structural design of RCC Under Ground /

Par ally under ground / above high ground level

Reservoir of required capacity as per relevant I.S.

standards and construc ng the same, including

excava on in all types of soil strata (including rock)

including shoring struNng if required, for loose soil /

to protect from collapse, cas ng 100 mm thick P.C.C.

levelling course in M15, Refilling the pit with proper

soil and disposing of the surplus stuff at all lead.

106 Including cement plaster in CM 1:2 with approved 50000.00 LTR 5.49

water proofing compound to all over inside container

(i.e. walls, base, top slab/dome boAom etc. all).

Including all types of labour and material charges of

lowering, laying, erec ng / hos ng and join ng of pipe

assembly to inlet, outlet overflow, washout and bye

pass arrangement as per hydraulic design. Providing

and fixing accessories, CI Manhole frame and cover,

water level indicator, adequate cowl type ven lators

or lantern type ven lator with stainless steel jail. RCC

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

chambers for valves. Providing and applying three

coats of cement paint / snowcem to the out side face

of structure. It also includes sa sfactory water

ghtness test as per relevant I.S. code and pain ng

name of scheme and capacity on the tank as per

direc on of engineer in charge as per details

specifica ons men oned in GWSSB SOR

LT CABLES ,Supply, laying, connec on, tes ng and

commissioning of heavy duty, low voltage, XLPE (IS

7098 - PART-II) insulated, stranded AL / Cu conductor

Armoured cables as per specifica on & IS.The cable

shall have inner sheeth of XLPE and outer sheath of

PVC ST2 (FRSL) type with stranded AL/Cu conductor

wherever specified.The cable shall be laid

underground in excavated trench / prepared trench /

hume pipes when laid outside the building. Cable shall

be laid throught prepared trench / cable tray / duct /

hume pipe / channel / floor trunks etc when laid inside

the building.The scope shall include:1) Supply of

Cables.2) Delivery of the cables at site.3) Unloading at

site store.4) Shi ing of cable from site store to place

of installa on.5) Excava on in hard or so murrem /

rocky area upto required depth, supply and laying of

107 protec on bricks, supply and backfilling with fine 120.00 Mtr. 855.47

sand, levelling the ground to match with the exis ng

condi on.6) 'Laying of cable in the excavated trench /

prepared trench / cable tray / duct / hume pipe /

channel / floor trunks when laid inside or outside the

building.7) Connec on of cable.8) Supply & fixing of

cable clamps, brackets, supports, route markers etc.

where ever required to fix the cables safely.9) Earthing

the glands and armouring with earthing clamp and

jumper and also connec ng to common earth bar.10)

Tes ng of insula on and con nuity of cable and

submission of reports to the client's

representa ve.11) To prepare submission drawing

and to take approval of consultant at each stage.12)

To prepare & submit as-built drawing and handing

over document to end user.3.5C X 150 SQ. MM. AL

LT CABLES ,Supply, laying, connec on, tes ng and

commissioning of heavy duty, low voltage, XLPE (IS

7098 - PART-II) insulated, stranded AL / Cu conductor

Armoured cables as per specifica on & IS.The cable

shall have inner sheeth of XLPE and outer sheath of

PVC ST2 (FRSL) type with stranded AL/Cu conductor

wherever specified.The cable shall be laid

underground in excavated trench / prepared trench /

hume pipes when laid outside the building. Cable shall

be laid throught prepared trench / cable tray / duct /

hume pipe / channel / floor trunks etc when laid inside

the building.The scope shall include:1) Supply of

Cables.2) Delivery of the cables at site.3) Unloading at

site store.4) Shi ing of cable from site store to place

of installa on.5) Excava on in hard or so murrem /

rocky area upto required depth, supply and laying of

protec on bricks, supply and backfilling with fine

sand, levelling the ground to match with the exis ng

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

condi on.6) 'Laying of cable in the excavated trench /

prepared trench / cable tray / duct / hume pipe /

channel / floor trunks when laid inside or outside the

building.7) Connec on of cable.8) Supply & fixing of

cable clamps, brackets, supports, route markers etc.

where ever required to fix the cables safely.9) Earthing

the glands and armouring with earthing clamp and

jumper and also connec ng to common earth bar.10)

Tes ng of insula on and con nuity of cable and

submission of reports to the client's

representa ve.11) To prepare submission drawing

and to take approval of consultant at each stage.12)

To prepare & submit as-built drawing and handing

over document to end user.4C X 16 SQ. MM. AL XLPE

LT CABLES ,CABLE END TERMINATION AND

CONNECTION ,'Supply, fixing, connec on, tes ng &

commissioning of single compression brass cable

glands and crimping type Bimetalic lugs / sockets with

necessary tools and equipment's as specified in

specifica ons and IS. For outdoor installa ons,

double compression glands shall be considered. The

glands and lugs / sockets shall be suitable for cable

109 size and type men oned above. The job also includes, 20.00 Each 507.02

if necessary, supply and fixing of extension busbar of

same material on circuit breaker or panel board

terminal / connector to connect more than one no.

of parallel cables or to connect higher size cable to

lower size unit. The job also includes earthing the

glands and armour of the cable with common earth

bar or flexible copper mesh. ,3.5C X 150 SQ. MM. AL

INTERNAL WIRING ,Wiring for Light Points Directly

Controlled from DBsSupply, installa on, connec on,

tes ng & commissioning of following outlet points as

per Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB to outlet point

through MCB as required & including the outlet points

with connector & sockets. A point shall include in

addi on to phase & neutral wire, earth con nuity

wire from LDB to the final termina on at outlet points.

All the wiring, outlet points shall be done in a surface

/ concealed manner with ISI approved medium duty,

110 rigid MMS PVC, ISI conduit of minimum 25 mm. dia. 50.00 Each 493.89

using 650 V FRLS copper conductor wire. Supply and

installa on of front suitable plate, PVC back box with

brass chromium / cadmium plated machine screws

etc. shall be part of job.Cost of MCB shall not be

considered in point rate.Wire Size:Phase & Neutral :

2.5 mm2 Cu FRLS flexible wire (650 V)Earth : 1.5 mm2

Cu FRLS flexible wire (650 V)Average Circuit

Length:From LDB to Primary Light Point :

MTR.From Primary Point to Secondary Light Point:

MTR. ,Primary light points controlled by one 6A MCB

INTERNAL WIRING ,Wiring for Light Points Directly

Controlled from DBs

Supply, installa on, connec on, tes ng &

commissioning of following outlet points as per

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB to outlet point

through MCB as required & including the outlet points

with connector & sockets. A point shall include in

addi on to phase & neutral wire, earth con nuity

wire from LDB to the final termina on at outlet points.

All the wiring, outlet points shall be done in a surface

/ concealed manner with ISI approved medium duty,

rigid MMS PVC, ISI conduit of minimum 25 mm. dia.

using 650 V FRLS copper conductor wire. Supply and

installa on of front suitable plate, PVC back box with

brass chromium / cadmium plated machine screws

etc. shall be part of job.Cost of MCB shall not be

considered in point rate.

Phase & Neutral : 2.5 mm2 Cu FRLS flexible wire (650

Earth : 1.5 mm2 Cu FRLS flexible wire (650 V)

Average Circuit Length:

From LDB to Primary Light Point : 15 MTR.

From Primary Point to Secondary Light Point: 5 MTR.

,Secondary light points controlled by one 6A MCB in

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch BoardsSupply, installa on, connec on,

tes ng & commissioning of following outlet points as

per Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

112 with ISI approved medium duty, rigid FR PVC, ISI 110.00 Each 493.89

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.Wire Size:Phase &

Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)Earth :

1.0 mm2 Cu FRLS flexible wire (650 V)Offwire size =

1.0 sqmm (P+N+E)Average Circuit Length:From SB to

Primary Light Point: 5 MTR.From Primary to

Secondary Light Point: 3 MTR. ,Primary light points

controlled by one 6A switch

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch Boards

Supply, installa on, connec on, tes ng &

commissioning of following outlet points as per

Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

with ISI approved medium duty, rigid FR PVC, ISI

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.

Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650

Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)

Offwire size = 1.0 sqmm (P+N+E)

Average Circuit Length:

From SB to Primary Light Point: 5 MTR.

From Primary to Secondary Light Point: 3 MTR.

,Secondary light points controlled by one 6A switch

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch BoardsSupply, installa on, connec on,

tes ng & commissioning of following outlet points as

per Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

114 with ISI approved medium duty, rigid FR PVC, ISI 50.00 Each 624.18

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.Wire Size:Phase &

Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)Earth :

1.0 mm2 Cu FRLS flexible wire (650 V)Offwire size =

1.0 sqmm (P+N+E)Average Circuit Length:From SB to

Primary Light Point: 5 MTR.From Primary to

Secondary Light Point: 3 MTR. ,Two way light points

controlled by two 6A switch

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch Boards

Supply, installa on, connec on, tes ng &

commissioning of following outlet points as per

Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

with ISI approved medium duty, rigid FR PVC, ISI

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.

Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)

Offwire size = 1.0 sqmm (P+N+E)

Average Circuit Length:

From SB to Primary Light Point: 5 MTR.

From Primary to Secondary Light Point: 3 MTR. ,6A

socket with one 6A switch on switch board with

cover plate and all required accessories

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch BoardsSupply, installa on, connec on,

tes ng & commissioning of following outlet points as

per Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

with ISI approved medium duty, rigid FR PVC, ISI

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.Wire Size:Phase &

Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)Earth :

1.0 mm2 Cu FRLS flexible wire (650 V)Offwire size =

1.0 sqmm (P+N+E)Average Circuit Length:From SB to

Primary Light Point: 5 MTR.From Primary to

Secondary Light Point: 3 MTR. ,6A socket with one

6A switch at convenient loca on with cover plate and

all required accessories

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch Boards

Supply, installa on, connec on, tes ng &

commissioning of following outlet points as per

Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

with ISI approved medium duty, rigid FR PVC, ISI

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.

Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650

Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)

Offwire size = 1.0 sqmm (P+N+E)

Average Circuit Length:

From SB to Primary Light Point: 5 MTR.

From Primary to Secondary Light Point: 3 MTR. ,One

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Fan point controlled by one 6 A SWITCH. The cost shall

include supply of Modular step type Fan regulator

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch BoardsSupply, installa on, connec on,

tes ng & commissioning of following outlet points as

per Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

with ISI approved medium duty, rigid FR PVC, ISI

118 conduit of minimum 25 mm. dia. using 650 V FRLS 100.00 Each 524.19

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.Wire Size:Phase &

Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)Earth :

1.0 mm2 Cu FRLS flexible wire (650 V)Offwire size =

1.0 sqmm (P+N+E)Average Circuit Length:From SB to

Primary Light Point: 5 MTR.From Primary to

Secondary Light Point: 3 MTR. ,One Exhaust Fan (5A

plug socket) controlled by 6A switch and moun ng

plate with necessary accessories. Supply of exhaust

fan shall not be included.

INTERNAL WIRING ,Wiring for Light Points Controlled

from Switch Boards

Supply, installa on, connec on, tes ng &

commissioning of following outlet points as per

Specifica on & IS. The unit rate for the point shall

consist of the circuit wiring from LDB and/or switch

board to outlet point through switch as required &

including the outlet points with connector & sockets.

A point shall include in addi on to phase & neutral

wire, earth con nuity wire from LDB to the final

termina on at outlet points.All the wiring, outlet

points shall be done in a surface / concealed manner

with ISI approved medium duty, rigid FR PVC, ISI

conduit of minimum 25 mm. dia. using 650 V FRLS

copper conductor wire. Supply and installa on of

Modular switches with suitable plate, PVC back box

with brass chromium / cadmium plated machine

screws etc. shall be part of job.

Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650

Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)

Offwire size = 1.0 sqmm (P+N+E)

Average Circuit Length:

From SB to Primary Light Point: 5 MTR.

From Primary to Secondary Light Point: 3 MTR.

,Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single moun ng

base frame covered with textured / metallic front

plate , modules erected with necessary connec on.

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

As desired by Engineer In charge

(15) 32 Amps. DP switch with Indicator. Cat-III

(MASTER SWITCH)

INTERNAL WIRING ,Mains Wiring for Ligh ng

CircuitsSupply, laying, connec on and tes ng of

ligh ng wiring from LDB to switch board with

following wires to be laid through PVC condiut in

concealed/surface manner.Cost of MCB and conduit

120 shall not be considered in point rate.Wire Size:Phase 550.00 Mtr. 90.90

& Neutral : 2.5 mm2 Cu FRLS flexible wire (650 V)Earth

: 1.5 mm2 Cu FRLS flexible wire wire (650 V)Supply,

laying, connec on and tes ng of above men oned

wires from LDB to switchboard to be laid through

electrical channel / floor raceway / PVC condiut.

INTERNAL WIRING ,Mains for Raw Power Points (For

5A computer/TV sockets)

Supply, laying, connec on and tes ng of raw power

socket wiring from PDB to raw power point with

following wires to be laid through electrical channel /

floor raceway / PVC condiut in concealed/surface

manner. (cost of Channel / raceway not to be included

in their rate.)

Cost of MCB shall not be considered in point rate.

121 Phase & Neutral : 2.5 mm2 Cu FRLS flexible wire (650 100.00 Each 506.01

Earth : 1.5 mm2 Cu FRLS flexible wire wire (650

V)Supply, fixing, connec on of wires, tes ng of

computer power point with 2 Nos. 6A SOCKET + 1No.

6A SWITCH FOR COMPUTER/TV POINT common

switch along with 8 module top cover plate, PVC back

box suitable to modular plate and other necessary

accessories to complete the installa on. (Approval for

the colour of the cover plate should be taken from the

Architect/Client)

INTERNAL WIRING ,Mains for Raw Power Points (For

5A computer/TV sockets)

Supply, laying, connec on and tes ng of raw power

socket wiring from PDB to raw power point with

following wires to be laid through electrical channel /

floor raceway / PVC condiut in concealed/surface

manner. (cost of Channel / raceway not to be included

in their rate.)

122 Cost of MCB shall not be considered in point rate. 400.00 Mtr. 90.90

Phase & Neutral : 2.5 mm2 Cu FRLS flexible wire (650

Earth : 1.5 mm2 Cu FRLS flexible wire wire (650

V)Supply, laying, connec on and tes ng of above

men oned wires from PDB to raw power socket to be

laid through electrical channel / floor raceway / PVC

INTERNAL WIRING ,Mains for Staff quarter, Class IV

quarter & Raw Power Points

Supply, laying, connec on and tes ng of raw power

socket wiring from PDB to raw power point with

following wires to be laid through electrical channel /

floor raceway / PVC condiut in concealed/surface

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

manner. (cost of Channel / raceway not to be included

in their rate.)

Cost of MCB shall not be considered in point rate.

Phase & Neutral : 4.0 mm2 Cu FRLS flexible wire (650

Earth : 2.5 mm2 Cu FRLS flexible wire wire (650

V)Supply ,fixing, connec on and tes ng of 5-pin 16 A

power plug socket alongwith 16A switch with top

cover plate, PVC back box suitable for modular plate

with all accessories to complete the job.

INTERNAL WIRING ,Mains for Staff quarter, Class IV

quarter & Raw Power Points and 16A sockets in all

buildings Supply, laying, connec on and tes ng of raw

power socket wiring from PDB to raw power point

with following wires to be laid through electrical

channel / floor raceway / PVC condiut in

concealed/surface manner. (cost of Channel / raceway

not to be included in their rate.)Cost of MCB shall not

be considered in point rate.Wire Size:Phase & Neutral

: 4.0 mm2 Cu FRLS flexible wire (650 V)Earth : 2.5 mm2

Cu FRLS flexible wire wire (650 V)Supply, laying,

connec on and tes ng of above men oned wires

from PDB to raw power socket to be laid through

electrical channel / floor raceway / PVC condiut.

INTERNAL WIRING ,Mains for Hostel, School buildings

Supply, laying, connec on and tes ng of providing

and erec ng Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire

125 in following type of pipe to be erected in / on wall / 800.00 Mtr. 291.89

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

con nuity of following size

(h) 4 wire 6 sq. mm

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

Starter and all other necessary accessories to

complete the installa ons.

Note : All light fixture will have Super low loss

Electronics ballast with PF>0.85 & harmonics within

permissible limits specified as per IS,

The rate shall include the following :

1) 'Unloading of light fixture at site.

2) Shi ing of light fixture with all tools & accessories

from site store to the site.

3) Installa on and assemble of light fixture at site.

4) 'Earthing of light fixture neutral & body.

5) 'Tes ng of light fixture as per IS before

6) To prepare submission drawing and to take

approval of consultant at each stage.

7) To prepare & submit as-built drawing and handing

over document to end user. ,Supply, Installa on,

tes ng and commissioning of recessed mounted 36W

LED Linear LED tubelight Length 4 (1200 mm) flush

with difused glass. (Wall mounted / Ceiling mounted)

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

Starter and all other necessary accessories to

complete the installa ons.Note : All light fixture will

have Super low loss Electronics ballast with PF>0.85

& harmonics within permissible limits specified as per

IS,The rate shall include the following :1) 'Unloading of

127 light fixture at site.2) Shi ing of light fixture with all 46.00 Each 222.20

tools & accessories from site store to the site.3)

Installa on and assemble of light fixture at site.4)

'Earthing of light fixture neutral & body.5) 'Tes ng of

light fixture as per IS before commissioning.6) To

prepare submission drawing and to take approval of

consultant at each stage.7) To prepare & submit as-

built drawing and handing over document to end user.

,Supply, Installa on, tes ng and commissioning of

wall / ceiling mounted 10W LED bracket lights.

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

Starter and all other necessary accessories to

complete the installa ons.

Note : All light fixture will have Super low loss

Electronics ballast with PF>0.85 & harmonics within

permissible limits specified as per IS,

The rate shall include the following :

1) 'Unloading of light fixture at site.

2) Shi ing of light fixture with all tools & accessories

128 from site store to the site. 40.00 Each 23.23

3) Installa on and assemble of light fixture at site.

4) 'Earthing of light fixture neutral & body.

5) 'Tes ng of light fixture as per IS before

6) To prepare submission drawing and to take

approval of consultant at each stage.

7) To prepare & submit as-built drawing and handing

over document to end user. ,Providing & Erec ng

following Shockproof ssino type accessories erected

on 3 mm thick PC (Polycarbonate) sheet in PVC/

Metal Box. erected on wall/ ceiling.

Bakelite lamp holder

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

Starter and all other necessary accessories to

complete the installa ons.

Note : All light fixture will have Super low loss

Electronics ballast with PF>0.85 & harmonics within

permissible limits specified as per IS,

The rate shall include the following :

1) 'Unloading of light fixture at site.

2) Shi ing of light fixture with all tools & accessories

from site store to the site.

3) Installa on and assemble of light fixture at site.

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

4) 'Earthing of light fixture neutral & body.

5) 'Tes ng of light fixture as per IS before

6) To prepare submission drawing and to take

approval of consultant at each stage.

7) To prepare & submit as-built drawing and handing

over document to end user. ,Street Light 45waAs,

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

Starter and all other necessary accessories to

complete the installa ons.Note : All light fixture will

have Super low loss Electronics ballast with PF>0.85

& harmonics within permissible limits specified as per

IS,The rate shall include the following :1) 'Unloading of

130 light fixture at site.2) Shi ing of light fixture with all 260.00 Each 6127.67

tools & accessories from site store to the site.3)

Installa on and assemble of light fixture at site.4)

'Earthing of light fixture neutral & body.5) 'Tes ng of

light fixture as per IS before commissioning.6) To

prepare submission drawing and to take approval of

consultant at each stage.7) To prepare & submit as-

built drawing and handing over document to end user.

,Supply, Installa on, tes ng and commissioning of

40W LED FLOOD LIGHT.(On terrace of the buildings)

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

Starter and all other necessary accessories to

complete the installa ons.

Note : All light fixture will have Super low loss

Electronics ballast with PF>0.85 & harmonics within

permissible limits specified as per IS,

The rate shall include the following :

1) 'Unloading of light fixture at site.

2) Shi ing of light fixture with all tools & accessories

from site store to the site.

3) Installa on and assemble of light fixture at site.

4) 'Earthing of light fixture neutral & body.

5) 'Tes ng of light fixture as per IS before

6) To prepare submission drawing and to take

approval of consultant at each stage.

7) To prepare & submit as-built drawing and handing

over document to end user. ,Supply,Installa on,

tes ng & commissioning of 1200mm Dia ceiling fan.

LIGHT FIXTURE ,Supply,Installa on, assembling,

connec on, tes ng & commissioning of fixtures

complete with suitable ra ng tubeslamps, high power

factor improving capacitor, HF Electronic Ballast

132 Starter and all other necessary accessories to 604.00 Each 3060.30

complete the installa ons.

Note : All light fixture will have Super low loss

Electronics ballast with PF>0.85 & harmonics within

permissible limits specified as per IS,

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

The rate shall include the following :

1) 'Unloading of light fixture at site.

2) Shi ing of light fixture with all tools & accessories

from site store to the site.

3) Installa on and assemble of light fixture at site.

4) 'Earthing of light fixture neutral & body.

5) 'Tes ng of light fixture as per IS before

6) To prepare submission drawing and to take

approval of consultant at each stage.

7) To prepare & submit as-built drawing and handing

over document to end user. ,Supply, Installa on,

tes ng and commissioning of 300mm dia exhaust fan.

Providing and supplying LED emergency inverter bulb

of approved make (such as Philips or equivalent) with

built-in rechargeable lithium baAery, automa c

133 charging feature, providing minimum 3 hours backup 28.00 Nos. 303.00

during power failure, suitable for standard B22/E27

holder, energy-efficient, complete in all respects as

directed by Engineer-in-Charge.

EXTERNAL LIGHTING ,Supply,erac on, assembling,

checking and tes ng of of decora ve external light

poles and high mast with fiNngs and clamps as

specified in Specifica on. The unit rate shall also

include following :

1) Fixing of pole with Sintex eq. Junc on box (IP 65) of

300x200x105 mm with 8. way connector & 2 Nos. of

A DP MCB, 38. mm. dia., PVC cable entry & exit

conduit as required.

2) Supply and laying of 3 nos. 38 mm. dia. 'B' Class G.I

pipe suitable for XLPE cable entry and exit to junc on

134 box as required. 237.00 Each 3946.07

3) Concrete coping with base plate & necessary civil

4) Earthing and pain ng.

5) Supply & connec ng of wiring from junc on box to

the light fixture, using 3c x 2.5 sq.mm. PVC copper

conductor, flexible cable.

6) Concrete coping with base plate & necessary civil

7) Including Excava on and back filling

Supply, Installa on, tes ng and commissioning of

45W LED street light fixture.

EXTERNAL LIGHTING ,Supply,erac on, assembling,

checking and tes ng of of decora ve external light

poles and high mast with fiNngs and clamps as

specified in Specifica on. The unit rate shall also

include following :

1) Fixing of pole with Sintex eq. Junc on box (IP 65) of

300x200x105 mm with 8. way connector & 2 Nos. of

135 A DP MCB, 38. mm. dia., PVC cable entry & exit 50.00 Each 10162.62

conduit as required.

2) Supply and laying of 3 nos. 38 mm. dia. 'B' Class G.I

pipe suitable for XLPE cable entry and exit to junc on

box as required.

3) Concrete coping with base plate & necessary civil

4) Earthing and pain ng.

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

5) Supply & connec ng of wiring from junc on box to

the light fixture, using 3c x 2.5 sq.mm. PVC copper

conductor, flexible cable.

6) Concrete coping with base plate & necessary civil

7) Excava on and back fillingSupply, Installa on,

tes ng and commissioning of 7.5 MTR Height GI Pole

(for Street Lights) as per specifica on, drawing and

relavent IS. Scope shall cover supply and installa on

of pole, cross arm, suitable size junc on box, pipe for

cable, wiring, earthing etc. to complete the job. Scope

doesn't cover light fixture.

EXTERNAL LIGHTING ,CABLING :

Supply, laying, tes ng and connec ng of medium

voltage cable for external ligh ng4C X 16 SQ. MM. AL

XLPE (for Street light pole)

EARTHING ,Earthing Sta onsSupply, installa on,

connec on and tes ng of plate type / pipe type

earthing sta on for various electrical equipments and

systems as per IS with following.1) Excava on in so

soil / hard marrum2) 'Supply of copper plate electode

/ G.I. Pipe electrode.3) Supply & fixing of watering

'B'Class pipe.4) Supply of civil material and

prepera on of brick masonry earth pit chamber with

Heayy Duty C.I. frame and hinged covers of suitable

size as per drawing.5) Supply and providing of

charcoal and salt for filling in earth pit.6) Supply of

tools and tackles necessary for excava on to a desire

depth and doing necessary civil work etc.7) Tes ng

earth resis vity before earthing and electrode

resistance a er comple on of work.8) Supply and

fixing of Equipoten al bar with housing alongwith

necessary moun ng accessories.600mm x 600mm x

3.15 mm Cu Plate type earthing sta on.

EARTHING ,Earthing Sta ons

Supply, installa on, connec on and tes ng of plate

type / pipe type earthing sta on for various electrical

equipments and systems as per IS with following.

1) Excava on in so soil / hard marrum

2) 'Supply of copper plate electode / G.I. Pipe

3) Supply & fixing of watering 'B'Class pipe.

4) Supply of civil material and prepera on of brick

masonry earth pit chamber with Heayy Duty C.I.

frame and hinged covers of suitable size as per

5) Supply and providing of charcoal and salt for filling

6) Supply of tools and tackles necessary for excava on

to a desire depth and doing necessary civil work etc.

7) Tes ng earth resis vity before earthing and

electrode resistance a er comple on of work.

8) Supply and fixing of Equipoten al bar with housing

alongwith necessary moun ng accessories.150 mm.

N.B., 'B' Class 3.0 mtr. long G.I. Pipe type earthing

EARTHING ,Earthing Conductor

Supply, laying, connec on and tes ng bare earthing

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

conductor for inter-connec ng the earthing sta ons

and various equipment in built up trenches,

walls/ceiling, buried in ground generally as specified

and shown on the drawing complete with :

1) Supply & fixing accessories like earthing clamp,

2) Supply of corrosion protec on of buried conductors

with bituminous coa ng

3) 'Supply of Test links (Copper/GI) etc.

4) Supply and installa on on Equipoten al bar.8 to

EARTHING ,Earthing Conductor

Supply, laying, connec on and tes ng bare earthing

conductor for inter-connec ng the earthing sta ons

and various equipment in built up trenches,

walls/ceiling, buried in ground generally as specified

and shown on the drawing complete with :

1) Supply & fixing accessories like earthing clamp,

2) Supply of corrosion protec on of buried conductors

with bituminous coa ng

3) 'Supply of Test links (Copper/GI) etc.

4) Supply and installa on on Equipoten al bar.50 X

MM Hot dipped ( 86 micron Zinc thicness min.) GI

EARTHING ,Earthing ConductorSupply, laying,

connec on and tes ng bare earthing conductor for

inter-connec ng the earthing sta ons and various

equipment in built up trenches, walls/ceiling, buried

in ground generally as specified and shown on the

141 drawing complete with :1) Supply & fixing accessories 10.00 Mtr 937.28

like earthing clamp, saddle, etc.2) Supply of corrosion

protec on of buried conductors with bituminous

coa ng3) 'Supply of Test links (Copper/GI) etc.4)

Supply and installa on on Equipoten al bar.25 X

EARTHING ,Supply, installa on, tes ng and

commissioning of below men oned Equipoten al bar

of 500 mm length with suitable junc on box to inter

142 connect different earthing conductor. The bar shall be 2.00 Each 3030.00

provided with six knock outs for connec ng the

equipment to earthing sta on.50 x 10mm GI

Equipoten al bar of 500 mm length.

EARTHING ,Supply, installa on, tes ng and

commissioning of below men oned Equipoten al bar

of 500 mm length with suitable junc on box to inter

143 connect different earthing conductor. The bar shall be 2.00 Each 4040.00

provided with six knock outs for connec ng the

equipment to earthing sta on.50 x 10mm CU

Equipoten al bar of 500 mm length.

CCTV SYSTEMS ,Supply, Installa on, Tes ng and

Commissioining of 2 MP, progressive scan, CMOS

144 image sencor, Fixed Color IR, IP Dome Camera, 1080P 490.00 Each 7150.80

resolu on, POE, 2.8 or 3.6 mm, SIP enabled for indoor,

wall or ceiling mounted.

CCTV SYSTEMS ,Supply & laying of the CAT-6 cable for

the CCTV data system in rigid PVC conduit / or channel

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

or raceway. The same wire will be u lised to transfer

data and power demand of camera PoIP. (the cost of

channel/raceway/PVC conduit not to be included in

CCTV SYSTEMS ,Supply, laying, tes ng and

146 commisioning of 25 mm dia rigid PVC medium duty 5250.00 Mtr 36.36

CCTV SYSTEMS ,Supply, Installa on, Tes ng and

147 Commssioining of 16 Channel Duplex Color IP based 24.00 Each 34925.80

Digital Video Mul plex Recorder (NVR) with 2 TB HDD

CCTV SYSTEMS ,Supply, Installa on, Tes ng and

Commssioining of PC with 43" color LED monitor and

So ware to view, display and store images for above

Supply, Installa on and termina on of 12 PORT

loaded patch panel

CCTV SYSTEMS ,Supply, Installa on, Tes ng and

Connec on of 0.9 mm Fiber Op c cable from data

150 switch between buildings laid through 1530.00 Mtr 70.70

raceways/conduits/floor trunks/ground etc. (Rates of

raceways/conduits/floor trunks shall be excluded)

CCTV SYSTEMSupply, Installa on and configra on

data switch as per following specifica ons:1) Subtype

- Gigabit Ethernet2) Ports - 24 x 10/100/10003) MAC

Address Table Size - 4K entries4) Status Indicators -

Collision status, port transmission speed, port duplex

mode, power, link OK, link/ac vity5) Nominal Voltage

- AC 120/230 V6) Frequency Required - 50/60 Hz7)

Type - internal power supply8) Cabling Type - Ethernet

1000Base-T, Ethernet 100Base-TX, Ethernet 10Base-

151 T9) MAC Address Table Size - 4K entries10) Features - 24.00 Each 30300.00

auto-sensing per device11) Compliant Standards -

IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u,

IEEE 802.3x12) Switching Protocol - Ethernet13) Rack

Moun ng Kit - included14) Moun ng Kit -

included15) Min Opera ng Temperature - ( 08 °C )16)

Max Opera ng Temperature - ( 40 °C ) 17) Humidity

Range Opera ng - 40 - 95%18) Compa bility - PC24

port 10/100/1000 Mbps RJ45 + 4 combo 1000 Base

SFP, SNMP manageable

PUBLIC ANNOUNCEMENT SYSTEM ,Supply and laying

of the 2c X 0.75 sq mm coper, stranded, shieded cable.

PUBLIC ANNOUNCEMENT SYSTEM ,Supply, laying,

153 tes ng and commisioning of 25 mm dia Rigid PVC 1900.00 R. Mt.. 36.36

medium duty conduit.

PUBLIC ANNOUNCEMENT SYSTEM ,Supply, Tes ng

and assembling of 15W ceiling/recessed mounted

speaker with necessary accessories,suitable for

indoor applica ons.

PUBLIC ANNOUNCEMENT SYSTEM ,Supply,

155 Installa on, Tes ng and commissioning of audio 6.00 Each 10100.00

PUBLIC ANNOUNCEMENT SYSTEM ,750w (900w

MAX.) Mixing Amplifier : High performance range of

156 single and Dual Zone amplifiers. Four balanced inputs 6.00 Each 13332.00

for microphone or line. Selectable priority and vox

switching on microphone input 1. Op onal 2-tone

Item of Work Qty. Unit Total Amount

Item of Work Qty. Unit Total Amount

Chime to precede announcements. Separate

overruling emergency input with vox, Choice of CD,

Tuner or auxiliary music inputs. Variety of public

address requirements at a surprisingly low cost. The

amplifiers shall be protected against overload and

PUBLIC ANNOUNCEMENT SYSTEM ,Supply, Tes ng

and assembling of volume controller.

PUBLIC ANNOUNCEMENT SYSTEM ,Supply,

158 Installa on, Tes ng and commissioning of Dynamic 6.00 Each 5050.00

Hand-Held Microphone.

I/We am/are willing to carry out the work at… ....................... % above/below

be written in figures and words) of the estimated rate mentioned above. Amount of my

/our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words