AMRUT-Comprehensive Proposal for Infra structure Enhancement of STP at Medical College-Comprehensive Proposal for Infra structure Enhancement of STP at Medical College-Sewerage Work

OD236151/2025-2026:Construction of acoustic treatment for the blower room, including installation of 50mm thick sound-absorbing wall and ceiling panels with a minimum Noise Reduction Coefficient (NRC) of 0.8, finished with perforated metal sheeting. Provide and install two double-leaf acoustic doors with appropriate seals to prevent noise leakage. Incorporate soundproof louvered ventilators for ventilation requirements. Additionally, construct a 230mm thick solid masonry wall on the open side, finished with plaster and a noise-reflective paint to reduce direct noise transmission. The objective is to effectively mitigate noise impact to nearby residents by combining both internal acoustic absorption and external sound barriers.

OD280573/2025-2026:Conference Table Table Size 300cm Lengthx 120cm Table Top WidthxT5cm Heght Made with Exterior Grade Both Side Prelaminated MDF Board. Table Top and Leg MDF Board Thick 35mm Having Cable Laying Way Making in Bottom Portion of Table Cable Cuby Fixed in the Top of Table and lnter Linked Cabling

OD275441/2025-2026:Cushion Chair Executive Cushion Chair Seat and Back Cushioned with Hydraulic System

OD275893/2025-2026:Supplying and fixing 2 TON 5 star Inverter AC( Blue star/Daikin/Voltas/LG) with seperate inverter.

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

12.52.3:Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.

OD276268/2025-2026:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amps modular socket outlet, ISI marked

OD276303/2025-2026:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps, one way modular switch, ISI marked