REPAIRS TO FLOOR WALL TILING AND REPLACEMENT TO SANITARY ,PLUMBING ITEMS WITH MISC B/R WKS AT CERTAIN OMQ AT 6 WING UNDER GE AF BARRACKPORE

Amount

M&L for one coat of white wash on walls and cornices after preparing plastered or unplastered old decorated surfaces by brooming down or steel wire brushing all as specified.

All as per Item No. 1 here-in-before but three coats of white wash on newly plastered surfaces all as specified.

M&L for one coat of white wash on ceiling after preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing all as specified & directed by Engineer-in-Charge.

All as per item No 3 here-in-before but three coats of white wash on newly plastered ceiling surfaces.

M&L for one coat of oil bound distemper after preparation of old decorated plastered or un-plastered surfaces of wall and cornices etc all as specified and directed by Engineer-in-Charge.

All as per item No 5 here-in-before but two coats of oil bound distemper.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over wall care putty 2 to 3mm thick and primer complete all as specified and directed.

M&L for complete removal of existing treatment applying two coats of oil bound distemper over of wall care putty 2 to 3mm thick and primer on old wall surface complete all as specified and directed.

M&L for two coat of acrylic base exterior paint over a coat of primer on newly plastered surface including preparation of surface all as specified & diracted by engineer in charge

M&L for one coat of synthetic enamel paint after preparation of old painted wooden surfaces over 10 cm width or girth of any description all as specified and directed by Engineer-in-Charge.

M&L preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified.

M&L for one coat of synthetic enamel paint after preparation of old painted steel surfaces over 10 cm width or girth of any description of external and internal surfaces only all as specified and directed by Engineer-in-Charge.

M&L preparation of new steel surfaes and applying two coat of synthetic enamel paint over a coat of red oxide over 10cm width or girth complete all as specified.

M&L for one or more coats of French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water etc all as directed.

M&L for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement all as directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 using water proofing compound and finishing the surface even and smooth with out using extra cement. (NOTE: WPC will measured and paid separetly)

M&L for 5mm thick cement plaster in cement mortar (1:3) as in ceiling, finished the surface even and smooth without using extra cement all as directed.

Supply only Liquid water proofing compound

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (unreinforced) below or above ground level and removing rubbish outside the premises as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tile to outside the MD land.

S&F joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed.

S&F joint free glazed coloured ceramic tiles 300 x 200 x7 mm thick on walls as in dados/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick bedding/backing layer in cm 1:3 complete all as specified and as directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed.

S&F digital concept glazed coloured ceramic tiles 450x 350 x7 mm thick on walls as in dados/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick bedding/backing layer in cm 1:3 complete all as specified and as directed.

M&L for Vitrified Ceramic tiles (light shade 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm screed bed in CM (1:6) complete all as specified and as directed.

-ditto- all as per item No 25above but vertical surface such as skirting, dado and pillars etc. and including 10mm bedding/backing layer in CM (1:3) complete all as specified and as directed.E35

M&L PCC 1:3:6, type C2, 75mm thick (using 40mm graded stone aggregate) as in plinthprotection with providing construction joint at every 3mtrs and filled sealing compound grade 'B', finished even and smooth with out using extra cement.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cuttingand and polishing types including 15mm screed bed in CM(1:6) complete all as specified and directed.

Rounding to edges of stone slabs one edge such as in steps and other similar situation including polishing to match the top surface

M & L for providing 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone agg finished even and rough as in toping layer for laying floor tiles, floors etc. complete all as specified and directed.

S&F for 20 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors after taking up or down old unserviceable tubing and connections.

S&F for 15 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors after taking up or down old unserviceable tubing and connections.

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 in brick wall for concealed water tubing, cutting not exc 10cm girth

S&F 15 mm stop valves cast copper alloy, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or unions as fixed in repairs (Concealed Type) with long shank & cup complete all as specified and directed.

S&F for CP basin mixer for mixing hot and cold water screwed down for pipes suitable for 15mm dia pipe fixed in repair complete all as specified and directed. (Make : Essco Model No - MCT 516A or equivalent)

S&F for hand shower (health faucet) with 1 mtr PVC flexible tube with wall hook (CP) complete all as specified and directed as in repair. (Make : Jaquar queen's series Cat No ALD 563 or equivalent of Parryware).

S&F for telephone shower chromium plated with flexible tube (CP) of required length with CP wall hook of any colour for fixing with 15mm bore pipe as in repair. (Make : Jaguar Cat No HSH 1717 or equivalent)

S&F for toilet paper holder (CP)complete all as specified and directed as in repair. (Make : Jaquar Cat No AHS 1553 or equivalent).

S&F for soap dish (CP) complete all as specified and directed as in repair.(Make : Essco Model No. AEC 1133 or equivalent)

S&F for towel ring (CP) complete all as specified and directed as in repair. (Make : Essco Model No. AEC 1121 or equivalent).

S&F for wall mixture three in one system (CP) with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe all as specified and directed as in repair. (Make : Essco Model No. MQT 517 or equivalent).

S&F 15 mm bore bib taps fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed in repairs.

S&F 15 mm bore bib taps fancy type (Long body) cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed in repairs.

S&F 15mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed in repairs.

S&F for 15 mm bore PVC connection pipe 600mm long with PTMT nuts at both ends.

S&F for 15 mm bore PVC connection pipe 450 mm/600mm long with brass chromium plated nuts at both ends for hot water supply of Jaquar Cat No ALD 8058 or equivalent

S&F 32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F for CP shower rose of 100 mm dia with swivel joints including fixing to steel pipe or union of 15mm dia as in repair. (Make : Essco Model No. EOS 542N or equivalent)

M&L 15 mm pillar taps cast copper alloy chromium plated, fancy type screwed down high pressue as fixed in repairs.

S&F for 125mm dia grating doom of PTMT / steel (minimum weight 40gms) as in repair.

S&F for PVC mirror cabinet (PTMT alloy) as in repair. (Make : Prayag, cat No 551).

S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 15mm dia

S&F for 10 Ltr capacity PVC valve less symphonic action type flushing cistern, low level with inlet, ball valve, float all as specified including necessary flush pipe as directed as in repair.

Removing/uprooting of plants over roof or sides of walls, filling the holes with cement mortar (1:3)/ PCC 1:2:4 mixed with liquid water proofing compound and finishing the surface even and smooth.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc; incl cast iron ‘P’ or ‘S’ trap complete.

S&F for plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete as in repair.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plugs and 32mm dia bore CP coupling complete as in repairs including a pair of bracket.

S&F for PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 15mm/20mm bore iron pipes all as specified and directed. (Make : Prayag)

S & F of 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S&F Cast iron floor trap with grating including jointing to waste pipe in run lead for 75mm bore including CP grating cover with or without hole complete.

Taking down existing AC/PVC pipes (any size or pattern ) including all fittings

S&F for 40mm dia PVC (HDPE) pipe of pressure rating 6 Kg/Sqcm fixed complete to walls, ceilings or in floors etc as in repair.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid on floors all as directed as in repair.

All as per item No 65 here in before but 75mm bore.

S&F for 110mm bore PVC (SWR) bends of any radius with access door.

All as per item No 67 here in before but 75mm bore.

S&F for sinks without draining board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 410mm x 360mm x 160mm as in repair. (Make : Prayag)

S&F 4.00 mm thick sheet glass oridinary quality and glazing with oil putty in square nexc 0.50 Sqm in each pane as in repair.

All as per item No 70above but figured glass, pin head type

S&F for 5.5mm thick sheet glass shelf assembly consisting of 12cm wide glass shelf with chromium plated bracket guard and 60cm long railing as in repair.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as directed as in repair.

M&L for pre-cast RCC slab set in cement mortar (1:4), type B1, (1:2:4), using 20 mm graded stone aggregate after demolition of reinforced concrete all as specified and directed.

M & L for mild steel TMT bars 8 to 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F for 20mm dia Stainless steel curtain rails.fixed in repairs

S&F for stainless steel brackets for fixing of 20mm dia curtain rails.

Supply and fix fancy type 25mm dia aluminium powder coated PVC seathed 1.5mm thick alloy drapery rod ornamental complete all specified and directed.

Supply and fix aluminium poweder coated ornamental finals fancy type suitable for 25mm dia drapery rod complete all as specified and directed

M&L for Catch clamp for 25mm dia Curtain rods

Demolition of brick work build in CM including all quoins, arches, pillars etc

M&L for brick work with sub class "B" brick straight or curved on plan exceeding 6mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortor 1:4 complete all as specified and directed.

Taking down chowkhats with shutter (without taking of shutter from the frame) n. exc. 1.5 Sqmt each.

Taking down chowkhats with shutter (without taking of shutter from the frame) exe. 1.5 Sqmt but n.exc 4 Sqm each and removing out side the MD land.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each and removing out side the MD land.

Taking down shutters of any description n.exc 1.00 sqm each and removing out side the MD land.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.

S&F factory made PVC door shutters 30mmm thick (Style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F 35mm thick glazed and skelton shutters with 2nd class hard wood open rebated and prepared to receive glass /gauge etc with sash bars devided into squares, with plain chamfered or rounded, mitreated and rebated sash bars any numbers all as specified

S&F for 30mm thick glazed and skeleton shutters factory made with 2nd class hard wood open rebated and prepared to receive glass / gauze etc. with sash bars divided into squares, with plain chamfered or rounded, mitered and rebated sash bars any numbers all as specified & directed.

S&F for 30mm thick flush shutter, solid core construction with block board core and ply wood face panels commercial type, both faces of shutter covered with decorative face veneer with lipping/frame to match type ace panels commercial type, both sides complete all as specified and directed.

S&F for Factory Made Solid with particle board core PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

S&F frame work such as grills and gratings etc with ends bars shoulders and/or riveted or forged into spikes.

S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed or welding.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed in repairs

S&F 75mm long butt hinges (medium weight) colled rolled mild steel fixed or welding.

S&F 75mm long butt hinges (medium weight) colled rolled mild steel fixed or welding.fixed in repairs

S&F 50mm long butt hinges (medium weight) colled rolled mild steel fixed or welding.

M&L small fittings such as hinges black shaped door stopper window stop etc of 1stclass H/wood article n.exc 200 cu cm.

M&L 150mm long aluminium anodised handle oval type

M&L 150mm long aluminium anodised handle oval type fixed in repairs

M&L 100mm long aluminium anodised handle oval type

M&L 100mm long aluminium anodised handle oval type fixed in repairs

S&F aluminium anodised barrel tower bolt 150mm long

S&F aluminium anodised barrel tower bolt 150mm long fixed in repairs

S&F aluminium anodised barrel tower bolt 100mm long

S&F aluminium anodised barrel tower bolt 100mm long fixed in repairs

S&F aluminium sliding door bolt 300mm long, bolt, not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

M&L for 300mm,ordinary rat tail rod pattern mild steel spring including roller and roller plate complete.

S&F for 2nd class hard wood scantling, wrought in any position and any description as in timber framed work and fixed complete all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought , secured with nails or brads exc 13 & n.exc 25 sqcm in repairs

M&L double action floor springs hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stain steel cover governing pivot made of brass other parts made of mild steel heavy duty.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decoratice choice laminations fixed to framed work fixed in repairs complete all as specified and directed.

S&F 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type, BWR grade fixed in repairs

Dismantalling of wall and ceilling boards or insulation board of any thickness,including cover fillets.

M& L Machine cutting and grinding of existing terrazzo flooring (one medium and one fine cutting) including applying necessary cement slurry with white cement and pigment to match with the existing floor colour and cleaning the surfaces with water and oxalic acid and applying wax polishing etc complete to floors including polishing for skirting/dado.

S&F Anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605mmall as specified

M&L for 4mm thick E-board jointless false ceiling and fixed to aluminium frame work complete all as specified and directed. (Aluminium frame work shall be measured and paid separately) Note : The rate included for taking down and refixing of all existing light/ fan points

S&F in repair for CP shower rose of 300mmx 300mm dia with swivel joints including fixing to steel pipe or union of 15mm dia as in repair. (Make : Jaquar/Essco /parryware).

S&f anodizing aluminium door shutter /window /partitions (powder coated ) partially glazed and partially louvered as required size aluminium section minimum weighting 0.55 kg /m powder coating of min 50 micron matt finish section with including necessary jointing cleats , glazing clips , neoprene packing handles 02 Nos in each door ,hings, anodized aluminium snap beading , screws etc fixed with aluminium flat 25 mm x 1 mm for fixing stainless steel mosquito proof net complete as specified and directed . Note :-Aluminium section brought at site shall be noted in MB and fabricated weight of door shall only be measured in presence of Engineer in charge for payment.

Taking down steel window /door carefully and refixed in same opening after necessary repair with welded supply an fixed any require item such as stay handle ect painting and making good to existing surface with CM1:3 . Note holr fast concrete etc will be measured and paid separatly.

Taking down Aluminium window/door n. exc 5 sqm each repair and refixing in same opning complete all as specified ( Note any member will be required to replace measured and paid separatly.)

ONIEL SALES

APOLLO TRADERS

BHAUMIK CONSTRUCTION

MODERN CONSTRUCTION

JAGATRAM CONSTRUCTION

S. N. ENTERPRISE