REPAIR/REPLACEMENT OF ELECT WIRING/FITTING AND FIXTURES AND GI PIPE LINE, PUMPS, MOTOR AND ALLIED WORKS AT BARAMULLA AND PATTAN UNDER GE 969 EWS

Amount

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) Complete, incl fittings such as switches, ceiling roses, pendants, regulators, Sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps Switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin, 5 Amp flush type with gang box type complete all as specified and as directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15Amp flush type with gang box, universal complete all as specified and as directed.

S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin, 5 Amps flush type complete all as specified and as directed.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts, 6 Amps, complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repair LED Lamp 10W Complete all as specified and as directed.

S&F in repair LED 10W surface Bed/track light complete all as specified and as directed.

S&F in repair LED 12W down light Decorative, surface mounting, dome shaped pendant in green & black finishes complete all as specified and as directed.

S&F in repair LED 7.5W down light Decorative, surface mounting, dome shaped pendant in green & black finishes complete all as specified and as directed Havells Cat part No LHFHDPE1TN1K020 or equivalent.

S&F Decorative ultra slim square profile LED lighting fixture 1x20 watt with extruded polycarbonate, environmental friendly, energy efficient, complete all as specified and as directed. Havells Cat Part No EXACP7UN1W020 equivalent.

S&F ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 6.5W LED complete all as specified and as directed Havells Cat part No LHEXCGP7IN5W006 or equivalent.

S&F 6 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed Cat. Part. No. LHEBADP7IZ1W006 or equivalent.

S&F 2 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed Cat. Part. No. LHEBADP7IZ1W006 or equivalent.

S&F 15 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed. Cat. Part. No. LHEBAD6IZ1W015 or equivalent.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

S&F in repairs Bell Push 5 Amp, flush type complete all as specified and as directed.

S&F switch modular single pole one way 6 amp 240 volts, 1 Module. Complete all as specified and as directed.

S&F switch modular single pole one way 16 amp 240 volts,1 Module. Complete all as specified and as directed.

S&F Modular socket 6A - 2/3 pin combined 2 module. Complete all as specified and as directed.

S&F Modular socket 6A /16A- 2/3 pin combined 2 module. Complete all as specified and as directed.

S&F modular fan regulator step type, 120W -2 module. Complete all as specified and as directed.

S&F in repairs Modular Bell Push 6 Amp, One module complete all as specified and as directed.

S&F white cover plate with frame, 1 Moudule for point complete all as specified and as directed.

S&F white cover plate with frame, 2 Moudule for point complete all as specified and as directed.

S&F white cover plate with frame, 4 Moudule for point complete all as specified and as directed.

S&F white cover plate with frame, 6 Moudule for point complete all as specified and as directed.

S&F ceiling rose 3 terminal/PVC/Polycarbonate, isolated body complete all as specified and as directed.

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S&F in replacement LED Mirror Light 10 W, Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, suitable for surface mounting on a ceiling or wall complete all as specified and as directed. Havells Cat Part No LHEXACP5IN1W010 or equivalent.

S&F 36/40 Watt Warm White LED ultra modern recess mounted luminaire (2'x2') environmental friendly, new generation, aesthetically designed, with high brightness complete all as specified and as directed.

S&F in repairs distribution board, TPN 4 way, Double door metallic sheet metal enclosure for DB when MCBs to be used, 440 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed| position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed.

S&F in repairs MCB, SPN 40 to 63 Amps rating 240V, 10KA 'C' curve complete all as specified and as directed.

S&F in repairs MCB, SPN 32 Amps rating 240V, 10KA 'C' curve complete all as specified and as directed.

S&F in repairs MCB, SP 6 to 32 Amps rating 240V, 'C' curve complete all as specified and as directed.

S&F Distribution board, SPN 2 way, single door complete all as specified and as directed.

S&F in repairs MCB TPN 40 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S&F in repairs MCB TPN 63 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S&F in repairs RCBO TPN 63 amp rating 415V, 10KA, 100 mA Cat. No. DHBMACTN8100063 of Havells or equivalent Complete all as specified and as directed.

S&F in repairs RCBO SPN 63 amp rating 240V, 10KA, 100 mA Cat. No. DHBMACDP4100063 of Havells or equivalent Complete all as specified and as directed.

S&F in repairs RCBO SPN 40 amp rating 240V, 10KA, 100 mA Cat. No. DHBMACDP4100040 of Havells or equivalent complete all as specified and as directed.

M&L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with al accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch |board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM

M&L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

M&L sub main wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC linsulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISl marked with all accessories such as Tees, elbows, junction boxes etc, as required Fixed on wall alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. Note: Two runs of 10 sqmm and one run of 10 sqmm cable and one run of casing capping shall be measured as one RM.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 6 sqmm all as specified and directed

S&F 1100 V grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apartincluding 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed

S&F 1100 V grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 sqmm all as specified and directed.

Supply and fix, install and testing ISI marked, metallic body, energy efficient, water heater storage type, copper tank, electrically operated, single phase, 50 Hz (5 star rating), complete of 25 Ltr capacity with and including supply and fixing, wire armoured 450 mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, Anchor fastner 04 Nos of suitable size, 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect and all as specified and directed by Engr-in-Charge. Old geyser deposited to MES store yard.

Repair and re-fixing, re-assembling the existing ceiling fan in same original position along with cable after rectification of defects such as apply the one coat varnish for windings, painting fan blades, changing fan bearing, rewinding of fan, write MES no on fan blades including nut, bolts and washers complete all as specified and as directed.

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed.

S&F in repair capacitor 2.5/3 mfd suitable for 250mm/350mm sweep exhaust fan complete all as specified and directed.

S&F heating element including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape (triangular/round) complete all as specified and as directed.

S&F heating element including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape (triangular/round) complete all as specified and as directed.

S&F high pressure valve with dead weight suitable for 25/50 Ltrs capacity Geysers including taking down existing unserviceable high pressure valve complete all as specified and as directed.

S&F Thermostat including rubber / PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for existing geysers of capacity 25/35/ 50 Itrs including taking down existing unserviceable thermostat complete all as specified and as directed.

S&F PVC connecting pipe 18"/24" long with brass adopters for cold/hot water and connecting up with complete for 25 /35 /50 Itrs capacity Geysers including taking down existing unserviceable PVC connecting pipe complete all as specified and directed.

S&F base assembly complete with inlet, outlet thermostat pipes, drain plug and screws for fixing the element suitable for any make and capacity Geysers complete with nuts, bolts and rubber gasket including taking down existing unserviceable base assembly complete all as specified and as directed.

M&L for repair to water heater inner vessel including brazing, welding, testing for a pressure of 3 kg/sqcm re-assembling of any capacity Geyser complete all as specified and as directed.

S&F bottom covers (set of two halves) duly painted made out of Aluminium / MS sheet of 18 SWG suitable for 25/ 35 / 50 Itrs capacity Geysers including taking down existing unserviceable bottom covers complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in deep in hard/dense soil/ road for getting out old GI tubing from the trenches etc.

Removing excavated material of any type of soil/soft rock from site to a distance not exceeding 50mtr away and depositing where directed not exceeding 1.5mtr above the starting point complete all as specified and as directed.

Returning flling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and as directed.

Repair to leakage broken pipe or in joints or in sluice valves (flanged/spigot socket joints) of exising pipe (supply and distribution mains) CI pipes of sizes 200/150/100 bore. by earth work ( excavation,returning filling,removal in any type of soil) dewatering. and fixing neccesaary suitable sizes of new ( IsI marked) CI fittings i.e (flanged/spigot tail Pieces, collers, Tee,bend, to repair the leakage complete all as specified and directed by Engr-in-charge. Note: (1) cost of CI fitting shall be measured and paid separetely under relevant items of schedule (2) Excavation& Eath work shal be measured and paid separetely. (3) cost of all T&P and pumping set for dewatering shall be included in quoted rates. (4) cost of lead joint, spunyarn, gland packing etc. shall be measured and paid separetely under relevant items of schedule.

Material and laying GI tubing medium grade ISI marked complete with all necessary fittings of sizes 15 mm bore in trenches including takaing down of old rusted Gl pipes complete all as specified and as directed.

All as per above Item No. 73 here in before but of size 20 mm.

All as per above Item No. 73 here in before but of size 25 mm.

All as per above Item No. 73 here in before but of size 40 mm.

All as per above Item No. 73 here in before but of size 50 mm.

S&F Cast iron Pipe with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches of size 150mm bore complete all as specified and as directed.

Cutting of cast iron pipes of 150/100 mm dia and reducing to required length for insertion of tee, bends elbow etc complete all as specified and as directed.

Supply and fixing Gl flange Thread type (Chudi type) type suitable for 50 mm bore GI/CI pipe line inlcuding welding with pipe, nuts, bolts gasket 3 mm thick complete alI as specified and directed.

All as per above Item No. 80 here in before but of size 80 mm.

All as per above Item No. 80 here in before but of size 100 mm.

All as per above Item No. 80 here in before but of size 150 mm.

All as per above Item No. 80 here in before but of size 200 mm.

Supply and fixing GI Bend heavy duty (45°, 60° and 90) of size 50 mm bore Gi/CI pipe line inlcuding welding with pipe, nuts, bolts gasket 3 mm thick complete all as specified and directed.

All as per above Item No. 85 here in before but of size 80 mm.

All as per above Item No. 85 here in before but of size 100 mm.

All as per above Item No. 85 here in before but of size 150 mm.

S&F Bearing of Size 6305 for centrifugal pump complete all as specified and as directed.

S&F Bearing of Size 6307 for centrifugal pump complete all as specified and as directed.

S&F Bearing of Size 6309 for centrifugal pump complete all as specified and as directed.

S& F Bearing of Size 6311 for centrifugal pump complete all as specified and as directed.

S&F in repair, cast iron fittings for pressure pipes such as bends,(any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm dia complete all as specified and directed.

Material and labour run lead joint suitable for spigot and socket pipes 150 mm dia spigot complete all as specified and directed including taking out of old one.

Material and labour run lead joint suitable for spigot and socket pipes 100 mm dia spigot complete all as specified and directed including taking out of old one.

S&F Gun metal gate valve 15 mm bore with iron hand wheel head, screwed both ends for iron pipes and fixed complete including dismantling old and unsv complete all as specified and as directed.

All as per above Item No.96 here in before but of size 20mm.

All as per above Item No. 96 here in before but of size 25 mm.

All as per above Item No. 96 here in before but of size 40 mm.

All as per above Item No. 96 here in before but of size 50 mm.

All as per above Item No. 96 here in before but of size 80 mm.

Cast iron Sluice Valve ISI mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel brass spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets of size 200 mm bore complete all as specified and as directed.

All as per above Item No. 102 here in before but of size 150 mm.

All as per above Item No. 102 here in before but of size 100 mm.

All as per above Item No. 102 here in before but of size 80 mm.

S&F Cast iron Non Return valve W/O by pass arangement, Swing type of Size 100 mm bore, confirming to IS 5312, flanged ends with nuts bolts, washers complete including taking down of old one complete all as specified and as directed.

All as per above Item No. 106 here in before but of size 150 mm.

CI Foot valve for pipe flanged/thread/Screw type ISI marked complete with nuts, bolts and washers packing material etc complete all as specified and directed for 100mm GI pipe.

CI Foot valve for pipe flanged/thread/Screw type ISI marked complete with nuts, bolts and washers packing material etc.complete all as specified and directed for 80mm Gl pipe.

CI Foot valve for pipe flanged/thread/Screw type ISI marked complete with nuts, bolts and washers packing material etc.complete all as specified and directed for 50mm GI pipe.

M&L for construction of old broken brick masonary Valve Chamber with PCC (1:3.6) type C1 foundation and full brick wall of size 90 x 90 x 90 cm ( internal dimension). with one brick thick wall using sub class 'B brick in cement mortar 1:6 over 20mm thick PCC 1:4:8 type D-2 base with 15cm off set on all sides including plastering of internal surfaces and exposed surfaces with 15mm thick plastering in cement mortar of (1:4) two coat of white wash, PCC (1:3:6) type C1 (using 20mm graded stone aggregate) in coping, 50x50x6mm thick mild steel angle iron frame, 5mm thick MS plate cover with locking arrangement and painting exposed steel surfaces with synthetic enamel paint two coats over a coat of zinc chrome primer complete all as specified and as directed.

M&L for Disconnecting and dismantling unserviceable Centrifugal pumping set of singlestage/multistage from site and transport to the workshop for repair/replacement of defective parts like impeller, shaft, lock key, worn out bearing, rubber coupling gasket 3 mm thick, glands packing, stuffing box, mechincal seal and rusted nut, bolts etc and reassembling properly, greasing all movable parts, fixing in position, testing and commissioning at site all as directed by Engr-in-Charge for the following capacity of pumps. Note : (i) A warranty of one year shall be given for satisfactory performance of pump set (ii) Alternative arrangement of pump set for water supply will be arranged by the contractor if the pump is not repaired within five days, a penalty of Rs 1000 per day will be deducted and no extra cost willl be paid to the contractor un less natural calamidity is occured. (iii) All the T&P items i.e. chain pully block & tripart shall be arranged by the contractor without claiming any extra cost.

(a) 0.5/1/2 HP Pump

(b) 3/5 HP Pump

(c) 10/15 HP pump

(d) 30/25 HP pump

(e) 50 HP pump

(f) 75 HP pump

Disconnecting the defective/burnt electric induction motor & dismantling from the foundation, shifting to workshop for rewinding the electric induction motors suitable to run on 415V, AC, 50Hz supply with copper enameled copper wire of suitable gauge/size including proper insulation, warnishing, drying, greasing bearing, etc and making connection to the terminal plate complete for the following ca of electric motor Note: (i) A warranty of one year shall be given for satisfactory performance of Motor (ii) If the motor is not repaired within five days, a penalty of Rs 1000 per day will be deducted and no extra cost willl be paid to the contractor un less natural calamidity is occured. (iii) All the T&P items i.e. chain pully block & tripart shall be arranged by the contractor without claiming any extra cost. (iv) Minor parts required is deemed to be inclusive of quoted rate.”

(a) 0.5/1/2 HP Pump

(b) 3/5 HP Pump

(c) 10/15 HP pump

(d) 30/25 HP pump

(e) 50 HP pump

(f) 75 HP pump

S&F Star Delta starter of size 50 HP including taking down the old one from the mounting and connecting. placing , testing and commissioning complete all as specified and as directed.

S & F Star Delta starter of size 75 HP including taking down the old one from the mounting and connecting, placing , testing and commissioning complete all as specified and as directed.

S&F Star Delta starter of size 100 HP including taking down the old one from the mounting and connecting, placing , testing and commissioning complete all as specified and as directed.

S&F Star Delta starter of size 125 HP including taking down the old one from the mounting and connecting, placing , testing and commissioning complete all as specified and as directed.

S&F MCCB Four Pole 400 Amps 36KA complete all as specified and as directed.

S&F MCCB Four Pole 250 Amps 36KA complete all as specified and as directed.

S&F MCCB Four Pole 200 Amps 36KA complete all as specified and as directed.

S&F ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200A complete all as specified and as directed.

S&F ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 100A complete all as specified and as directed.

S&F ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63A complete all as specified and as directed.

M&L for GI Union of size 50mm complete all as specified and as directed.

M&L for GI Union of size 40mm complete all as specified and as directed.

M&L for GI Union of size 25mm complete all as specified and as directed.

M&L for GI Union of size 20mm complete all as specified and as directed.

M&L for GI Union of size 15mm complete all as specified and as directed.

M&L for GI Elbow of size 50mm complete all as specified and as directed.

M&L for GI Elbow of size 40mm complete all as specified and as directed.

M&L for GI Elbow of size 25mm complete all as specified and as directed.

M&L for GI Elbow of size 20mm complete all as specified and as directed.

M&L for GI Elbow of size 15mm complete all as specified and as directed.

M&L for GI Socket of size 50 mm complete all as specified and as directed.

M&L for GI Socket of size 40 mm complete all as specified and as directed.

M&L for GI Socket of size 25 mm complete all as specified and as directed.

M&L for GI Socket of size 20 mm complete all as specified and as directed.

M&L for GI Socket of size 15mm complete all as specified and as directed.

M&L for GI Reducing Tee of size 50x25mm complete all as specified and as directed.

M&L for GI Reducing Tee of size 50x20mm complete all as specified and as directed.

M&L for Gl Reducing Tee of size 25x20mm complete all as specified and as directed.

M&L for GI Reducing Tee of size 20x15mm complete all as specified and as directed.

M&L for GI Nipple of size 15mm and 80mm long complete all as specified and as directed.

M&L for GI Nipple of size 15mm and 100mm long complete all as specified and as directed.

M&L for GI Nipple of size 20mm and 80mm long complete all as specified and as directed.

M&L for GI Nipple of size 20mm and 100mm long complete all as specified and as directed.

M&L for GI Nipple of size 25mm and 80mm long complete all as specified and as directed.

M&L for GI Nipple of size 25mm and 100mm long complete all as specified and as directed.

M&L for GI Reducing Socket of size 25/20mm complete all as specified and as directed.

M&L for GI Reducing Socket of size 20/15mm complete all as specified and as directed.

M&L for Rubber Gasket suitable for 80/100/150/200mm for jointing flanged Cl/GI Pipe and fittings complete all as specified and as directed.

S&F Motor Fan suitable for 10/15/25/30 HP complete all as specified and as directed.

S&F Rubber Coupling heavy duty suitable for 10/15/20 HP Pump Motor complete all as specified and as directed.

S&F Rubber Coupling heavy duty suitable for 25/30 HP Pump Motor complete all as specified and as directed.

S&F Rubber Coupling heavy duty suitable for 50/75 HP Pump Motor complete all as specified and as directed.

S&F Single Phase Preventor suitable for 15/25/30/50/75/100 HP Motor complete all as specified and as directed.

Cleaning of sedimentation tank of capacity upto 50000 gallons after removing/draining out residual silt and scrapping the internal surfaces of tank with wire brush, removing the fungus, deposit etc and depositing where directed not exceeding 100 mtr from tank washing with bleaching powder solution and providing two coats of cement base paint of approved make and quality on external surface complete all as specified and as directed.

Cleaning of treated water Over Head Reservoir of removing size 100000 GLN capacity by mud/wet silt from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the silt and scale from floot, walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls complete all as specified and directed.

Cleaning of treated water Over Head Reservoir of size 50000 GLN capacity by removing mud/wet silt from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the silt and scale from floot, walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls complete all as specified and directed.

Cleaning of treated water Under ground/Semi Under Ground collection tank/sump of size 50000 GLN capacity by removing mud/wet silt from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the silt and scale from floot, walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls complete all as specified and directed.

Cleaning of treated water under ground/Semi Under Ground collection tank/sump of size 20000 GLN capacity by removing mud/wet silt from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the silt and scale from floot, walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls complete all as specified and directed.

M&L for Remetaling, turning of pump Shaft by welding & machining works and finishing complete for 25HP Single stage centrifugal pump complete all as specified and as directed.

S&F Gland Packing as per sample complete all as specified and as directed.

Supply only Spunyarn for applying to repair the joints complete all as specified and as directed.

Supply only cotton waste for cleanning the machinery by concern operator at E/M instlns complete all as specified and as directed.

M&L for repacing old pea gravel with new one of size 12.5mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and as directed.

M&L for repacing old pea gravel with new one of size 20mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and as directed.

M&L for repacing old pea gravel with new one of size exceeding 1.5mm and not exceeding 4.75mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and directed.

M&L for proving gravel of coarse sand of size not exceeding 1.18mm in layers not exceeding 15cm thick including cleaning and washing of filter media complete all as specified and directed.

S&F spare parts of star delta starter like moving contact, bushing, Oil etc required for smooth functioning of starter suitable for 40 to 125 HP and re-installing at site, testing and commissioning complete all as specified and as directed.

Note :- Schedule of credit Rs. 1,51.547 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S LONE BUILDERS AND SUPPLIERS

M/S KULBIR SINGH SODHI AND CO

M/S IQ ENTERPRISES

M/S ARTECH BUILDERS AND SUPPLIERS