MOEI and Fans, RMO A/C Equipment, Pump Set at Bungalow of Senior officers and Ministers Residence, Mathura Road, Tilak Marg, Daryaganj, Chanakya Puri and nearby areas New Delhi (SH- Providing and fixing of Networking System in VVIP Building at Chanak

Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 XRJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 degree Celsius to +50 degree Celsius. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave,Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/ IPv6 Interface: minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/ RADIUS database, Port-based Access Control and EAP, OTP, TLS,TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDPMED, SNTP/ NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/ Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. (a) 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+.

Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High density use having features and specifications etc. as mentioned here under- WiFi6802.11ax 574Mbps (2.4GHz) + 2402Mbps (5GHz), WIFI 6Certified, 1 x RJ45 console port, MG 2.5G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Client ., Web (HTTP), Secure Socket Layer(SSL), Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2-PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W Controller with additional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.

Supplying, Installation, Testing and commissioning of Outdoor Wireless Access Point having features and specifications etc. as mentioned here under - WIFI 6 Certified, 1 x RJ45 console port, MG 2. 5G LAN POE Port, factory reset, 4 x internal antennas, the transmission coverage of shall be minimum 80 meters in radius, AP should have transmission power minimum of 22 dBm, The AP shall provide a minimum of 29 dBm EIRP for both 2. 4 GHz and 5 GHz frequencies. Feild deployment shall be with EIRP as per regulatory guidelines, AP shall have dual-band Omni-directional Antenna, either internal or external. Feild deployment shall be with EIRP as per the WPC guideline, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable , MAC address access control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Client, Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced security - WPA- PSK/WPA2-PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, IP68 water/dustproof standard, 6KV Surge Protection; 4KV ESD Protection (contact), 6KV (air), Operating ambient temperature (-5~50°C), Grounding point support, IEC 60601-1-2 EMC Medical Electrical Equipment Testing and Certification, EN50121-1 & EN50121-4 for Wireless Application. Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role- Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Preassembled shelves in multiple configurations, Rubber fibre slotted bracket built-in, metal splice shelf to protect the fibres, 2fiber spools built-in for 900μm tight buffered fibre storing, Capable of storing up to 3 meters of 900μm tight buffered fibre per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. (a) 6 Port LIU

Supplying, Installation, Testing and commissioning of indoor Wireless Controller having features and specifications etc. as mentioned here under- The network controller shall be a dedicated hardware appliance designed for centralized management of wireless access points, It must support the management of up to 500 networking devices, The system should be on-premise, ensuring data privacy and complete control over network configurations. It must include an intuitive user interface for real-time monitoring, device discovery, firmware upgrades, scheduling, and mass configuration deployment. Features such as role-based administration, multi-site management. AP to controller communication shall be use of industry standards-based (IEEE or IETF) CAPWAP or any tunneling protocols as per guidelines of DoT. The controller should support Layer 2 and Layer 3 device discovery, VLAN configuration, MAC ACL groups, IGMP snooping, and bandwidth optimization. Automatic radio frequency (RF) management and access policy enforcement are required for reliable wireless performance. The solution must offer a comprehensive dashboard with network topology, floor plan views, client and device lists, and alert notifications. For authentication, it should support a range of methods including local database, external RADIUS, LDAP, and passcode or MAC-based access. It should provide detailed traffic analytics, logs, and customizable reporting for network visibility and planning. Firmware and configuration backup and restoration functions must be available, with USB- based log storage supported. Physical specifications should include a compact form factor with a minimum of one 2. 5G Ethernet port and USB 3. 0 port, and it must be MTCTE, CE, FCC, and RoHS certified. The controller should operate reliably within a 0°C to 40°C temperature range and 10-90% non-condensing humidity. /Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802. 1O, Port based, O-in-O, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS, TACACS+ Authentication, OoS: 802. 1P, 8 queues per port, OoS : WRR, Strict+WRR, WRED, 802. 1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802. 3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802. 3at PoE+ min.

Supply of 24 port Cat6 Patch Panel loaded. Must be of 1Uheight with clear label holders and white label with the panel.24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D

Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D (a) Copper Patch Cords of length 1m (3ft)

(b) Copper Patch Cords of length 3m (10ft)

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted 275 DELHI SCHEDULE OF RATE (E&M) 2025 Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should bein the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. (a) 1 Run cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 25 mm

Supplying and fixing of PVC channel of following size perforated type heavy duty with cover, joint on surface of wall etc. as required. (a) 25mm x 12 mm

Supply, Installation, Testing & Commissioning of server based IP PBX System shall have 20 users advance license with 2 Nos 1U server with configuration dual core processor, single power supply, Dual Giga bit ETH Ports DDR4 8GB RAM. 1x 512 GB HDD. End points - (IP phones, Smart Mobile Phones, Analog Phones & Video Phones). Licenses for above configuration will be included in the scope of supply. VPN Server & Client Should be Builtin in the solution. Voice Mail & Voice Mail to Email for all users. Support IPV4 & IPV6 from Day one. Built in Call billing and NMS software a.16AnalogUser b.8PortFXO The quoted model/System should have Type Approval Certificate as per TEC specification number TEC/GR/SW/PBX-005/01/Sept-16 or latest. Tenderer must submit valid TEC approval certificate along with the offer and it should be on the name of manufacturer/tenderer only. Without this the offer will summarily rejected. The proposed IP Epabx Server/Gateway/IP phones should be IPV4 and IPV6 tested.

Supply, Installation, Testing & Commissioning of Type -1 IP Phone HD Voice 2.3 ” 132 x 64- pixel graphical LCD Two-port 10/100M Ethernet Switch PoE support One SIP account Cradle Lesss Headset Local 5-way conferencing , Narrowband codec: G.711, G.723.1, G.726, G.729AB, Full-duplex handsfree speakerphone, Stand with 2 adjustable angles, Wall mountable Handset etc. complete as reqd.

Supply, Installation, Testing & Commissioning of Type-II IP Phone (SIP supported), 6 SIP lines with Two port 10/100/1000 Ethernet switch, Integrated POE on IEEE 802.3af, Fullduplex speaker phone with AES, 2.8-inch (320x240) color screen, 8 Line key with LED, Further paperless DSS key progarmming possible ( upto 3 page), XML/LDAP remote phonebook, Message Waiting Indicator (MWI), Auto Provision by support of TR 69, RTCP-XR (RFC3611), VQ-RTCPXR (RFC6035), Call server redundancy supported, 6-Way Audio Conference Support, NAT transverse: STUN mode, Proxy mode and peer-to-peer SIP link mode, IP assignment: static/DHCP , Time and date synchronization using SNTP, UDP/TCP/DNS-SRV (RFC 3263), QoS: 802.1p/Q tagging (VLAN), Layer 3 ToS DSCP, SRTP/TLS, HTTPS certificate manager, AES encryption for configuration file , Digest authentication using MD5/MD5-sess, OpenVPN, IEEE802.1X, LLDP/CDP/DHCP VLAN, IPv4/IPv6, Dual-port Gigabit Ethernet port, All necessary accessories to connect the switch and SIP phones will be included in the scope of supply etc. complete as reqd.

Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568. 2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required.

Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1. 25mm Powder Coated CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 5nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0. 8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1. 6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. a) 6U Rack

b) 9U Rack

Please Enable Macros to View BoQ information