Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.7 LAccepted-AOC | ₹6.7 L Quoted ₹6.8 L | L1 | Accepted-AOC work awarded |
| 2 | L2₹7.0 L+₹17,369 (2.54%)Rejected-Finance | ₹7.0 L+₹17,369 (2.54%) | L2 | Rejected-Finance L2 |
| 3 | L3₹7.3 L+₹42,923 (6.28%)Rejected-Finance NOT AVAILABLE | ₹7.3 L+₹42,923 (6.28%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | ANKUSH KUMAR L3 | Parbhat Singh Harchand L2 | KAILASH BHARTI GAUTAM L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation in trenches in earth work in pick work, jumper work within all leads and lifts and lift stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc., consolidating each deposited layer by ramming, watering, and then disposing of all surplus excavated earth as directed within all leads and lifts as per the direction of Engineer-in-charge. (Pick Work) | 92.4 | Cum | 320 ₹29,568 | 310 ₹28,644 | 300 ₹27,720 Lowest |
| 2.00 | Dismentaling of GI pipe of various dia in trenches complete in all respect (earth work to be measured and paid for separately) including all leads and lifts as per the direction & satisfaction of E-in-charge. | - | - | - | - | - |
| 2.01 | 100mm dia (M) | 210 | Rmt | 125 ₹26,250 | 120 ₹25,200 | 115 ₹24,150 Lowest |
| 3.00 | Re-Laying, jointing and testing of old dismentaled pipe in trenches GI pipe of various dia confirming to ISI specification i/c commission complete in all respect (earth work in trenches shall be measured and paid for separately) within leads and lifts as per the direction & satisfaction of E-in-charge. | - | - | - | - | - |
| 3.01 | 100mm dia (M) | 210 | Rmt | 125 ₹26,250 | 120 ₹25,200 | 115 ₹24,150 Lowest |
| 4.00 | Laying, jointing & testing in trenches to be levelled to grades, BIS marked GI pipes conforming to BIS:1239 ( latest with up to date amendments ) of following dia (Medium class PE) duly flanged after every 5th pipe with intermediate butt welded joints including the cost of flanges, bends of required degree, tee/ short pieces made from parent tubes of different degrees cutting , welding & jointing with flanges conforming to table as specified below of BIS:6392 ( latest with up date ammendments ) three layers (two layer out sides and one layer inner side) welded as per BIS:816 ( latest with up date ammendments ) with electrodes conforming to BIS 814 (latest with up date ammendments ) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4 mm thick ( Champion make ) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments ) & approved specification as per site conditions including flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge. (The earth work will be measured & paid separately) | - | - | - | - | - |
| 4.01 | 100mm dia (M) PE Flange Tabel - 5 | 210 | Rmt | 170 ₹35,700 | 160 ₹33,600 | 150 ₹31,500 Lowest |
| 5.00 | Providing and fixing of Kirloskar/ Kilburn/ IVC/Fouress/ Gled/BHEL/ Leader/Kartar make Cast Steel Double flanged non return Valve of class-ASA 300 as per relavant IS standards withstand nominal seat pressure 20.00 KG/Cm sqr. Conforming to IS BS : 1868/API 600 (latest with up to date ammendments if any) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge having following nominal diameters: | - | - | - | - | - |
| 5.01 | 65mm dia | 1 | Nos | 30,000 ₹30,000 | 29,510 ₹29,510 | 29,210 ₹29,210 Lowest |
| 6.00 | Providing and fixing of Kirloskar/ Kilburn/ IVC/Fouress/Gled/BHEL/Leader/Kartar make Cast Steel Double flanged Sluice Valve of Class-ASA 300 as per relavant IS standards withstand nominal seat pressure 20.00 KG/Cm sqr. Conforming to IS BS : 1868/API-600 (latest with up to date ammendments if any) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge having following nominal diameters: | - | - | - | - | - |
Tender Value
₹6.8 L
EMD Value
₹13,582
Closing Date
1 Sept 2026, 11:00 amClosed
Executive Engineer
JSV Division Jawali
Restoration of Rain Damages under JSV Division Jawali in Tehsil Jawali Distt Kangra HP SH Dismentling Relaying and Testing of GI pipe 100mm dia in Buhal Khad at village Nial Batua Supply and Erection of 16mm2 Submersible cable at T Well Butt PF o
2026_HPIPH_141957_1
3847-96 dated 24.08.2026
Open Tender
Civil Works - Water Works
Item Rate
30 days
Restoration of Rain Damages under JSV Division
Please refer Tender documents.
5 documents required · 5 mandatory
₹350
₹13,582
17 Sept 2026
25 Aug 2026
1 Sept 2026
25 Aug 2026
1 Sept 2026
25 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation in trenches in earth work in pick work, jumper work within all leads and lifts and lift stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc., consolidating each deposited layer by ramming, watering, and then disposing of all surplus excavated earth as directed within all leads and lifts as per the direction of Engineer-in-charge. (Pick Work) | 92.4 | Cum | 121 | ₹11,180.4 |
| 2 | Dismentaling of GI pipe of various dia in trenches complete in all respect (earth work to be measured and paid for separately) including all leads and lifts as per the direction & satisfaction of E-in-charge. | - | - | 153 | - |
| 2.01 | 100mm dia (M) | 210 | Rmt | 121 | ₹25,410 |
| 3 | Re-Laying, jointing and testing of old dismentaled pipe in trenches GI pipe of various dia confirming to ISI specification i/c commission complete in all respect (earth work in trenches shall be measured and paid for separately) within leads and lifts as per the direction & satisfaction of E-in-charge. | - | - | 153 | - |
| 3.01 | 100mm dia (M) | 210 | Rmt | 121 | ₹25,410 |
| 4 | Laying, jointing & testing in trenches to be levelled to grades, BIS marked GI pipes conforming to BIS:1239 ( latest with up to date amendments ) of following dia (Medium class PE) duly flanged after every 5th pipe with intermediate butt welded joints including the cost of flanges, bends of required degree, tee/ short pieces made from parent tubes of different degrees cutting , welding & jointing with flanges conforming to table as specified below of BIS:6392 ( latest with up date ammendments ) three layers (two layer out sides and one layer inner side) welded as per BIS:816 ( latest with up date ammendments ) with electrodes conforming to BIS 814 (latest with up date ammendments ) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4 mm thick ( Champion make ) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments ) & approved specification as per site conditions including flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge. (The earth work will be measured & paid separately) | - | - | 153 | - |
| 4.01 | 100mm dia (M) PE Flange Tabel - 5 | 210 | Rmt | 121 | ₹25,410 |
| 5 | Providing and fixing of Kirloskar/ Kilburn/ IVC/Fouress/ Gled/BHEL/ Leader/Kartar make Cast Steel Double flanged non return Valve of class-ASA 300 as per relavant IS standards withstand nominal seat pressure 20.00 KG/Cm sqr. Conforming to IS BS : 1868/API 600 (latest with up to date ammendments if any) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge having following nominal diameters: | - | - | 153 | - |
| 5.01 | 65mm dia | 1 | Nos | 121 | ₹121 |
| 6 | Providing and fixing of Kirloskar/ Kilburn/ IVC/Fouress/Gled/BHEL/Leader/Kartar make Cast Steel Double flanged Sluice Valve of Class-ASA 300 as per relavant IS standards withstand nominal seat pressure 20.00 KG/Cm sqr. Conforming to IS BS : 1868/API-600 (latest with up to date ammendments if any) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge having following nominal diameters: | - | - | 153 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.08 MB
terms.pdf
Tender Documents • 0.17 MB
BOQ_210725.xls
BOQ • 0.31 MB
form68.pdf
Tender Documents • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .