Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹47.3 L+₹1.6 L (3.50%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹47.3 L+₹1.6 L (3.60%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹47.6 L+₹1.9 L (4.23%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹47.8 L+₹2.1 L (4.67%)Rejected-Finance MOTHER TERESA ROAD ZOO TINIALI GUWAHATI 781024 | GUWAHATI | KAMRUP METRO | ASSAM | 781024 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SILCHAR
GE SILCHAR PO ARUNACHAL DIST CACHAR ASSAM 788025
REPAIRS MAINTENANCE OF MISCELLANEOUS B R ASSETS AT VARIOUS LOCATIONS OF MASIMPUR MILITARY STATION UNDER GE SILCHAR
2022_MES_572344_1
8763/E8
Open Tender
Civil Works
Item Rate
180 days
MASIMPUR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SILCHAR
₹90,000
Yes
7 Feb 2023
31 Dec 2022
28 Jan 2023
31 Dec 2022
21 Jan 2023
14 Jan 2023
Amount
M&L for dismantling rusted / damaged fencing of any size / type from any height and disposing off complete all as specified and as directed
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed
Dismantling mild steel work or wraught iron of any description and in any position complete all as specified and as directed
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in cover slabs, removing debris from site and making good the disturbed surfaces / portions in existing specifications complete all as specified and as directed
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed
Demolition of cement concrete (un-reinforced) in ground floors and pavings exceeding 15cm and not exceeding 30cm in thickness (below or above ground level) and removal of debris complete all as specified and as directed
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed
Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed
M&L for mild steel TMT bars grade Fe-500D, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
M&L for mild steel TMT bars grade Fe-500D, 5 to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
M&L for mild steel TMT bars grade Fe-500D, 5mm dia & over upto & including 10mm dia, as in stirrups, spacers, etc. cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
M&L for mild steel round bars 8 to 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in supports to chain link fencing complete all as specified and as directed
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10mm complete all as specified and as directed
M&L for framed works conforming to Fe 410-W (grade E-250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed
S&F angle iron posts & struts in fencing including cutting top to shape, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-290 grade E-165 quality -'B' (for securing chain link fencing, etc.) complete all as specified and as directed
Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed Note: Weight of chain link shall be ascertained by a BOO ordered by the GE
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provisioning of binding wire complete all as specified and as directed
M&L for taking down and resecuring sagged chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc. including provisioning of binding wire complete all as specified and as directed
S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc. including all necessary T&P, safety measures, staging, scaffolding, etc. to work at heights over security walls, etc. complete all as specified and as directed Note: Weight of barbed wire shall be ascertained by a BOO ordered by the GE
S&F razor punched tape concertina coil, 9SWG hot galvanised spring tensile wire of UTS 145 to 150N/sqm, zinc coating 250 to 300gms/sqm, dia of coil when un-streched shall be 610mm having minimum of coil (GI strip) 1.625kg/10Rm, hot dip galvanised razor ribbon tape of size 0.50mm thickness, 19mm wide before wrapping on central core wire fixed with 1.66mm thick GI clips (minimum 25Nos / Rm) and special nut and bolts to hold two coils together and extra rows parallel wire of 10gauge including all necessary staging, T&P for work on periieter walls, at heights, etc. complete all as specified and as directed and as per details below:
(a) Diameter of concertina coil: 600mm (b) Numbers of turns in concertina: 50 to 53 turns (c) Weight of each coil- 9.5 to 10kg (d) Coverage per coil- 6Rm (e) Central core wire - Made of high tensile spring steel core wire conforming to IS -4454 duly hot dipped galvanized (conforming to IS 2629) with diameter 2.59mm+0.05mm, UTS 145-160kg/sqmm, zinc coating 250-300gms/sqm (f) Strip: Electro galvanised steel strip 0.5 mm + 0.02mm thick, width 19mm (before wrapping on central core wire ) conforming to IS-1573, zinc coating -120gms/sqm and bituminized dipped, width of barbes 11.5mm, pitch of blades 25.4mm +0.20mm (g) Clips: AISI 304-1.5mm thick C and U clips. 'C' special type for fixing coil and RBT wire joining (h) Number of clips 125 for each coil (j) Handle and spikes to be provided as required Note: Running length of the fencing shall be measured for payment purpose
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed
--ditto-- all as per serial item No. 26 hereinabove but except bricks Note: Old serviceable bricks obtained under demolition shall be reused under this item
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed
M&L for rendering 15mm thick in cement mortar (1:4) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed
M&L for rendering 15mm thick in cement mortar (1:4) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed
S&F high intensity reflective sign boards made of hardened ACP sheet 3mm thick POP rivetted to sheet frame of square or rectangular tube, reflective with wide HIP sheet and overlay film of white / red / yellow colour (as approved) with computer cut letters, signs and borders complete all as specified and as directed Note: Stainless steel frame will be measured and paid separately under respective item herein
S&F stainless steel round, rectangular or square tube frame supported with bolts over round 3m long stainless steel tubular leg of 16 gauge with stainless steel bonded clamps all stainless steel parts duly bright polished complete all as specified and as directed
M&L for formwork to faces of concrete foundation, footing, bases of columns, raft and raft beams sides and soffits in foundation, plinth beams and similar works, flat, vertical or to batter for rough finished surfaces complete all as specified and as directed
M&L for formwork to faces of concrete pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal surfaces rough finished surfaces complete all as specified and as directed
M&L for plain cement concrete type C-2 1:3:6 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and as directed
M&L for plain cement concrete 1:2:4 type B1 with 20mm graded aggregate as in coping over walls, benching including neccessary formwork complete all as specified and as directed
M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and as directed
M&L for 75mm thick plain cement concrete type C-2, PCC 1:3:6, using 40mm graded aggregate, as in sub-base of floor complete all as specified and as directed
M&L for 100mm thick plain cement concrete 1:2:4 type B-2, using 40mm graded stone aggregates, as in path, hardstanding, finished making impression of expanded metal, whilst the concrete is green and brushing over with neat cement slurry with 3.00kg of cement per sqm including all neccessary formwork, etc. complete all as specified and as directed
M&L for 150mm thick plain cement concrete 1:2:4 type B-2, using 40mm graded stone aggregates, as in path, hardstanding, finished making impression of expanded metal, whilst the concrete is green and brushing over with neat cement slurry with 3.00kg of cement per sqm including all neccessary formwork, etc. complete all as specified and as directed
M&L for 75mm thick plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates, as in plinth protection / paths, finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 parts of sand complete all as specified and as directed
M&L for RCC (1:1.5:3) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, under reamed piles, etc. complete all as specified and as directed
M&L for RCC (1:1.5:3) using 20mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed
M&L for precast RCC 1:2:4, type B-1 using 20mm graded stone aggregates as in cover slabs and set in CM 1:4 including all neccessary formwork complete all as speified and as directed
M&L for preparation of new plastered / unplastered masonry / concrete / stone wall surfaces, etc. and applying two coats of exterior acrylic anti-fungal paint (tint as approved by the GE) over a coat of alkali resistant wall primer as per manufacturer's instructions with all staging, etc. as required complete all as specified and as directed
M&L for preparation of new plastered / unplastered masonry / concrete / stone wall surfaces, etc. and applying two coats of exterior acrylic anti-fungal paint (tint as approved by the GE) over a coat of wall care putty and alkali resistant wall primer as per manufacturer's instructions with all staging, etc. as required complete all as specified and as directed
M&L for complete removal of existing treatment and preparation of old masonry / concrete / stone wall surfaces, etc. and applying two coats of exterior acrylic anti-fungal paint (tint as approved by the GE) over a coat of exterior primer as per manufacturer's instructions with all staging, etc. as required complete all as specified and as directed
M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed
M&L for preparing of new steel surfaces of any description viz. roof trusses, purlins, rafters, angle iron posts, etc. not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed
M&L for preparing of old painted steel surfaces of any description viz. roof trusses, purlins, rafters, angle iron posts, etc. over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) complete all as specified and as directed
M&L for preparing of old painted steel surfaces of any description viz. roof trusses, purlins, rafters, angle iron posts, etc. over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) complete all as specified and as directed
M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.06sqm but not exceeding 0.11sqm each, 7 to 8mm thick of superior quality in floors etc laid over 20mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed
M&L pre-polished chequered coloured paver tiles 25mm thick, area of each tile exceeding 0.06sqm but not exceeding 0.11sqm in floors, set, jointed and pointed with neat cement slurry with white cement and pigment (to match tint of tile) including 20mm thick screed bed or bedding layer in cement mortar (1:6) (rate shall be included) and brushing with neat cement slurry @3.00kg of cement per sqm complete all as specified and as directed
M&L for laying pre-polished 60mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-35 design mix concrete of approved design and shape with the crushing strength not less than 350kg/sqcm conforming to IS: 15658-2006, complete all as specified and as directed
M&L for laying pre-polished 80mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-40 design mix concrete of approved design and shape with the crushing strength not less than 350kg/sqcm conforming to IS: 15658-2006, complete all as specified and as directed
M&L for laying machine pressed 80mm thick, designer, interlocking tiles made of M-40 design mix concrete of approved design and shape with the crushing strength not less than 350kg/sqcm conforming to IS: 15658-2006, complete all as specified and as directed
M&L for fine dry river sand bedding under floors, pavings, etc. then punning down to its consolidated thickness, 50mm thick complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes
M&L for forming contraction (dummy) joints 10mm deep x 10mm wide, filled with sealing compound grade-A and applying lime wash for full depth (i.e. 150mm) before laying adjacent layer complete all as specified and as directed
M&L for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade - A complete all as specified and as directed
Extra for forming fair finished drains or channels 30cm inner girth in cement concrete including forms, moulds, mitred / stopped ends, etc. complete all as specified and as directed
Add or deduct for each 25mm girth or part thereof over or under 30cm completed all as specified and as directed
S&F in repairs PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints laid in trenches / floors/fixed in walls complete all as specified and as directed
S&F in repairs PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints fixed on walls with suitable clamps, etc. complete all as specified and as directed
Younus Khan
M/S TAPAN KUMAR RAY
M/S M P Sharma
M/S LUIT CONSTRUCTION
M/S R A ENTERPRISE
SURANA CORPORATION
MS AFTAB LASKAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .