Construction of Open Jim in palika area

Amount

CROSS TRAINER Providing & Fixing of Cross trainer of size not less than 1520mm (Length) × 600mm (Width) × l750mm (Height), to enhance the mobility of upper & lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & 10mm thick. The Handle Frame shall be made up of atleast 25NB “C” Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130mm×210mm×5mm thickness & mounted on M.S. Plate of Size 130mm×310mm× 3mm thick. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo No. 2. (The cement concrete and excavation work shall be paid separately).

THAI-CHI SPINNER (2 WHEEL) Providing and Fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) × l000mm (Width) × 1280mm (Height), to increase mobility of shoulder-elbow and hip-knee. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & l0mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo No. 3. (The cement concrete and excavation work shall be paid separately).

SEATED PULLER Providing and Fixing of Seated Puller of size not less than 1900mm (Length) × 740mm (Width) ×1920mm (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & 10mm thick. The handle frame shall be minimum of 32NB “C” class G.I. pipe. The seal frame minimum of 32NB “C” class G.I. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo No. 4. (The cement concrete and excavation work shall be paid separately).

LEG PRESS Providing and Fixing of Leg Press of size not less than 1840mm (Length) × 360mm (Width) ×1560mm (Height), to build up the muscles of thigh rud enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm × 310mm × 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/Berger/Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo No. 5. (The cement concrete and excavation work shall be paid separately).

SIT UP BOARD DOUBLE Providing and Fixing of Sit up Board double of size not less than 1760mm (Length) ×1140mm (Width) × 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from “C” class GI pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fullfil the functional requirement. The indicative Design Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately)

POMMEL HORSE Providing and Fixing of Pommel Horse of size not less than 2150mm (Length) × 800mm (Width) × 800mm (Height), to enhance the flexibility of tower limbs, waist and abdomen. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from “C” Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolls shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/Nerolac Paints with 60 to70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge so fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no.8. (The cement concrete and excavation work shall be paid separately).

PUSH UP BARS Providing and Fixing of Push Up Bars of size not less than 1120mm (Length) × 550mm (Width) × 1700mm. (Height), to enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast dia 250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made front "C" Class G.I. pipe Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coats shall be done with Pure Polyester ponders of Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no.12. (The cement concrete and excavation work shall be paid separately).

GRAVITY INFRASTRUCTURES

CREATIVE PROJECTS

M/S CHOUDHARY CONSTRUCTION

svr creations

Vijay Stone Traders

Ashirwad Associates

M/s Anup Kumar Pareta