WBPWD/EE/N24/EL/e-NIQ-40/25-26

Part - A : Arrangement of Mortuary Cooler Chamber SUB-HEAD 1 -- SITC of 6-Bodies Mortuary Cooler Chamber Supply, Installation, Testing & Commissioning of modular Mortuary Chamber/ Cabinet unit for 06 (six) bodies with Insulation of PUF Panel of 80mm thick (approx.), cam lock arrangement etc. to make a chamber of approx. size of 3165mm(W) x 2400mm(D) x 1785mm(H) - (2 Column & 2 Row). Height of the cooling unit above mortuary cabinet 600mm. The body is made of SS304 corrosion resistant stainless steel. The wall, ceiling & floor will be fabricated with modular panels of 100% foamed 80mm thick polyurethane insulation of 40 (+/-2) kg/cum density, the blowing agent will be Cyclopentane which is eco-freindly & having zero ODP and foaming process should comply TUV standards & CCOE certification. Internal lighting will be equipped with waterproof CFL lamps, insulated multi doors are molded and stainless steel and externally locked, situated up front. Mortuary unit should be equipped with microprocessor based digital control panel to control temperature between (+) 2 Deg.C to (+) 6 Deg.C.

The carriage assembly should be have telescopic action, trolleys will be made of steel & sliding on telescopic rail and trays will be made of SS304 stainless steel with tubular edge. Refrigeration Unit is of unitary type, consisting of both evaporating and condensing unit in an integrated frame and is capable of being mounted on the cutout in the modular insulated ceiling of cabinet. The mounting should be made in such a way, it necessarily breaks and conductivity of and between the inside evaporating and outside condensing unit is housed in an insulated compartment outside the chamber, factory assembled, pre-charged and tested for ready field installation. Refrigeration unit model- RTU10SS-4 -- 2 Sets (1 Working + 1 Standby), Capacity- 10000 BTU/H, evaporator fan- 1600 CFM, evaporator coil- inner grooved copper tubes, 4 row, 8 FPI, Refrigerant- R404A (Mortuary Cooler Unit is CE Certified) (Make : Blue Star, Model- BMC-610-SS-4 or equivalent make as approved by EIC) after dismantling the existing old one. [NS]

Part - B : Allied Electrical Installation work SUB HEAD 2 -- SUPPLY OF CABLE Supply of 4/3.5/2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [Make- Gloster/RR Kabel/Havells/Polycab] a) 4 Core 50 Sq.mm. [NS] (from F/P box to VTPN)

b) 4 Core 25 Sq.mm. [NS] (from VTPN to HTPN)

c) 2 core 10 Sq mm. [NS] (for staff room SPNDB & glow sign board)

SUB HEAD 3 -- LAYING OF CABLE Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. [1(b)/F-2]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl. embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. a) From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor / pavement / wall etc. [5(i)/F-3]

b) Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor / pavement/ wall etc. [5(ii)/F-3]

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as per GS. [2(a)/F-1]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [2(b)/F-1]