COMPREHENSIVE MAINT TO MD ACCN IN ZONE C UNDER GE ROORKEE

Amount

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.50 Sqm each including wooden/steel windows & ventilators with grills/guard bars (if any) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed.

M&L powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, (3 shutter type) without sash bars, aluminium sections weighing 0 .55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. (Note :- Glass and wire mesh will be measured and paid seperately).

S&F stainless steel (grade-304) grills made of hollow tubes section including welding, grinding, buffing polishing and making curvatures wherever required and fitting the same with necessary holdfasts/SS dash fastners with nut & bolts of required size, complete all as specified and directed.

Supply only 5 mm thick plain, ordinary quality sheet glass and glazing with rubber packing to aluminium frame of door and window in any size in each pane complete all as specified and directed.

Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.

S&F solid PVC door frame of size, 50X47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed.

S&F FRP door frames three legged of cross section 90x45mm having single rebate 32mmx15mm. The laminated door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminated shall be 2mm thick, frame shall be covered with fiber glass from all sides ms flat iron 25x3mm shall be provided at the bottom to steady the frame including PCC 1:2:4 Ty B0 using 12.5mm graded stone aggregate as in frame, complete all as specified and directed.

M&L Plain cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) in filling of preseed steel frame, complete all as specified and directed

S&F M.S work as in holdfasts, wind ties, plane angle cleats for securing purlins to wooden trusses or rafters etc complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F FACTORY MADE 30 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc. with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed.

S & F FACTORY MADE 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including fixing of rubber door cills, complete all as specified and directed

S&F 30mm thick FRP paneled door shutter made with fire retardant grade unsaturated polyester rain moulded to 3mm thick FRP laminated for farming hollow rails and styles with wooden frame with ms tube frame of 29 gauge all around the style and middle rail duly coated with steel primer, cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all as specified and directed

S&F factory made gauged shutter shall be made out of angle iron 35x35x5mm and 25x25x5mm and 1.5mm thick, 10mm Square bars grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture, with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing complete all as specified and directed.

S & F factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded including taking down existing windows complete all as specified and directed.

S & F factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded including taking down existing windows complete all as specified and directed.

S&F Factory made steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, railings and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or PCC (1:2:4) complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed in square not exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples or by wooden beads or fixed in steel windows by screws complete all as specified and as directed.

All as per item No 27.00 above but in repair.

S&F 100 mm size cold rolled mild steel butt hinges ISI marked, medium weight complete all as specified and directed.

All as per item 29.00 above but 75mm.

S&F 150 mm size aluminium barrel tower bolts (ISI Marked) of extruded section and fixed to shutter complete all as specified and directed.

All as per item 31.00 above but 100mm.

S&F 125 mm size aluminium handle (ISI Marked) of extruded section and fixed to shutter complete all as specified and directed.

All as per item 33.00 above but 100mm.

S&F Mild Steel sliding door bolts, 250 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.

S&F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.

S&F in repair 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F rubber door cill 40/50mm as required in door cill complete with required nails etc. complete all as specified and directed.

S&F door seal brush with aluminium holder length 85 CM to 90 CM complete with required nails etc complete all as specified and directed.

S&F joint free vitrified tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per item No 40.00 above but for vertical surface like dado, skirting etc with 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L Non - skid coloured ceramic rectified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L 25mm thick Cement concrete type C-1, (1:3:6) (20mm graded aggregate) as in sub floor and levelling coarse etc complete all as specified and directed .

M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old painted work of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L 18mm Pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination & other side balancing white lamination, sliding type/ fixed type with screws to timber/aluminium frame work including PVC beading half round decorative type including hasps, stapples, continuous piano hinges, cup board knobs etc all as required complete all as specified and directed

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, rubbish off the premises etc complete all as specified and directed.

M&L Rendering 5mm thick plastering in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and fair (without using extra cement) complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar 1:4 with using water proofing admixture over a layer of 10mm thick rendering in cement mortar 1:6 on fair face of brick work/ concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separatly)

M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper using roller over two coat of wall putty all as specified and prescribed by manufacturer of paint complete all as specified and directed

M&L preparation of newly plaster/unplastered surface of wall applying putty two coats and sand papering till obtaining smooth surface and applying two coats of exterior anti fungal acrylic emulsion paint (wall mista of Berger paint or equivalent in Asian Paint, Nerolac etc having 3 years of performance warranty) over a coat of exterior water based primer complete all as specified and as directed.

M& L preparing plastered new surfaces of ceiling and applying two coats of white wash on ceiling surface complete all as specified and directed.

S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for length of door/window/opening.

S&F in repair Stainless steel grating 100mm dia with or without hole of best quality as approved by GE including fixing in CM (1:4) to floor/nahani traps etc complete all as specified and directed.

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type foam flow with crutch or butterfly handle , screwed down high pressure as approved by Engr in Charge complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated pillar tap foam flow with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank as approved by Engr in Charge complete all as specified and directed.

S&F in repairs stop/angle cock 15 mm bore ISI marked fancy type chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed.

S&F in repairs CP brass shower rose 125mm size shower with 300mm CP brass arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs, PVC connection 450/600mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs, 32mm dia brass CP waste fitting for WHB and fixed complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass CP for stainless steel sink of size 40/50 mm bore complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

Dismantling of Cast Iron pipe/PVC pipe up to 100 mm bore complete all as specified and directed.

Dismantling of Cast Iron pipe/ RCC drain pipe/PVC pipe up to 150 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends suitable for 110mm bore pipe complete all as specified and directed.

S&F PVC (SWR) bends suitable for 75mm bore pipe complete all as specified and directed.

S&F in repair PVC branch piece single (equal or unequal) 110 mm bore ordinary or inverted (spigot or socket type) or with parallel branches incl access door complete all as specified and directed

S&F in repair stack clamps for 110 mm pipe made out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

S&F in repair stack clamps for 75 mm pipe made out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

S&F in repairs, 32mm dia bore PVC flush pipe for connecting low level flushing cistern including jointing to WC seat of any type complete all as specified and directed.

S&F in repairs 32/40mm bore and 75cm long PVC waste pipe for WHB complete all as specified and directed.

Dismantling of RCC/ PVC water tanks exc 250 liters and n.exc 500 liters capacity of any condition or type complete all as specified and directed.

S&F white colour Rotational moulded polyethylene water storage tank 500 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including in let / out let connections, suitable for ball valve and all fittings complete all as specified and as directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including all connection etc including taking down old tubing complete all as specified and directed.

All as per item No 85 above bur for 20mm bore pipe.

M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate / Cement mortar 1:3 complete all as specified and directed.

S&F in repair stainless steel sink AISI 316 grade without drainage board of 1 mm thick with plug, washer and waste, including bedding in cement mortar to dwarf wall or including CP Waste, PVC Down pipe etc and fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm or more complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F in repairs, vitreous china squatting pan 'Orissa pattern' long pan of size 580x440mm white, with integral footrest & 'P' or 'S' trap including connection to trap, flushing pipe, anti-syphonage pipe etc and making good the floor to match with the existing surfaces complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin, white flat back size 550 x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket painted with 02 coats of synthetic enamel paint over 01 coat of red oxide primer etc complete all as specified and directed.

S & F in repairs looking mirror 5 mm thick with and fixed with chromium plated brass screwes and cup washers complete all as specified and directed.

S&F in repairs Cabinet Mirror (400mm x 500mm) complete all as specified and directed.

S & F in repairs for stainless steel peg set of six 380x35x2mm of size complete all as specified and directed.

S&F in repairs, brass chromium plated 600mm long and 20mm dia towel rail 'D' type, fixed to wall with CP steel screws with wooden gutties etc complete all as specified and directed.

S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in moratr in floors, aprons etc.

M & L for granite 18-20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding / edge polishing of front side complete all as specified and directed.

M&L applying a coat of 1 mm thick wall care putty as per manufacture instruction complete complete all as specified and as directed.

M&L for preparation of old surface of ceiling plastered including cornices and pillasters etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L preparing old surfaces of WALLS by brooming down or by steel wire brushing and applying one coat of oil bond distemper emulsion by using rollers over a coat of primer of same make suitable for distemper oil emulsion complete all as specified and directed.

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of exterior anti fungal acrylic emulsion paint (Having 3 years of performance warranty) over a coat of exterior water based primer complete all as specified and as directed. Note:- (a) The old surface shall be prepared by removing all foreign material by mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment as approved by paint manufacturer. (b) Applying a coat of anti fungal growth solution as approved. (c) Wall care putty of required thickness shall be applied to make the surface true level by removing all dents etc as diredcted. (d) The work must got executed through authorised applicator of reputed paint manufacturer by concluding MOU with manufacturer and guaranteed for a minimum period of 3 Years by the manufacturer as approved by GE. (e) All the stages shall be got approved by GE before proceeding to next stage. (f) The make, brand, colour and shade shall be got approved by GE. (g) The application of acrylic paint shall be with fully automatic airless spray machine with a flow speed of min 1 litre per menuite having pressure of 3300 PSI by allowing 6-8 hours to dry the surface before painting of subsequent coat.

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including cutting reinforcement required to facilitate demolition on the roof top/mumty/parapet and removal of debris and rubbish out side MOD land complete all as specified and directed.

Dismantling of floor of WC and bath not exc 300mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat @ 1.50 Kg/Sqm (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each WC portion is n.exc 2.00 Sqm each. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note:(i)The work will be executed by authorised manufacturers/ applicator. (ii) Plan area shall only be measured for payment purpose.

M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab complete all as specified and directed.

Form work to sides and soffits of shelves etc such as kitchen shelves, platforms and similar works rough finish surface of concrete (the thickness of slab/shelves n.exc 100 mm) complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc. (each layer) and removal of rubbish out of defence land complete all as specified and directed.

Demolition of Mud Phuska in roofs,any thickness including plastering and leeping of any thickness upto 30cm deep complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC roof / arch slab, including taking down exsiting PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed

M&L for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2% by weight of cement finished even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions over (including removal of existing membrane and removal of scrape from site) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L Cement concrete type B1 (1:2:4) (using 20 mm graded crushed stone agg) in roof kerbs or mud stop rounded or chamfered on edge etc complete all as specified and directed

M&L for 40mm thick brick tiles laid on cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.

S&F Stainless steel 4 shelf wall mounted kitchen utensils rack, Dish rack with plate & cutlery stand of size 24x24 inches, fixed to wall plugs and chromium plated brass screws complete all as specified and directed.

M&L for Cooler Stand made out of 2 Nos angle iron (ISA 50mm x 50mm x 6mm) including cutting hole of 230x230x230mm in walls, filling with PCC (1:2:4) Ty B-0 using 12.5mm thick stone aggregate incl fixing of 1 Nos angle iron of size 50mmx50mm x6mm, 1m long each incl running welding with other angle and 2 coat of synthetic enamal paint over a coat of primer over exposed steel surfaces for cooler stand, complete all as specified and directed

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labur in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site complete all as specified and as directed.

M&L for repair to RCC chajja (irrespective size) by cleaning, replastering in cement mortar 1:3 mixed with integral water proofing compound over 40mm thick( average ) PCC padding in CM 1:2:4 Type B-O (mixed with water proofing compound) to a required gradient or slope as directed by Engr-in-Charge and the plaster will extended upto 300mm on wall/roof surface to avoid leakage/seepage. Junction of old and new plaster will be well bonded with application of water proofing compound. Drip course or groove of siae 25mm x 4mm will be provided at the edge of bottom surface of the chajja. (Note:- Rates for cement plaster, WPC, PCC and formwork and specilist labours etc required for full completion of item shall be deemed to be included in the rates quoted against this item of BOQ by the contractor).

M&L for for writing letters/Bldg Nos or figures (Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted and black back ground of size 1.20mx0.90m complete all as specified and directed.

M&L for Stops, commans, short liines, dashes, hyphens, brackets, etc.with synthetic enamel paint to match existing work complete all as directed.

Demolition of cement concrete (un-reinforced) of any description and laid in ground floorts/paving n.exc 150mm thick complete all as specified and directed.

M&L 75mm thick Cement concrete type D-2, (1:4:8) (40mm graded aggregate) as in sub base of floor tile, path etc. complete all as specified and directed

M&L Cement concrete tiles 25cm x 25cm x 20-25mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, cut and polished over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n-exc 2.50 Sqm complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortor bedding (but not backing) laid bedded and pointed in any mortor and removal of old tiles from the premises complete all as specified and directed

AMAR NATH SHARMA (BID ID -3059800)

AMARJEET SINGH AND CO. (BID ID -3057074)

VINAYAK CONSTRUCTION COMPANY (BID ID -3059891)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3068909)

A.S. CONSTRUCTION COMPANY (BID ID -3068698)

shreyansh construction (BID ID -3060692)

M/S RAJESH ARORA (BID ID -3069103)