Routine Maintenance works at WC Hospital, JPHN training Center, Food Safety office and all other connected buildings a t W C H o s p i t a l , Thycaud,Thiruvananthapuram and Fire and Rescue Directorate and Office, Arts college connected building

Amount

Estimation

OD42929/2021-2022:Cleaning the blocked up and not working sewer manhole of size 80 x 80cm having height up to 200cm or nearest including disposal of black earth

OD42930/2021-2022:Cleaning the blocked up and not working sewer manhole of size 60 x 60 cm or nearest having a depth up to 150cm including disposal of black earth

OD42931/2021-2022:Cleaning the blocked up sewage line using sewage cleaning rod and making the line in working condition

14.76:Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

OD42914/2021-2022:Providing & laying on roof pressed clay departmental ridge tile (Mangalore tile) of 20 mm thickness and of approved pattern on roof complete .

OD42915/2021-2022:Providing & fixing on roof departmental pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on roof complete

OD42916/2021-2022:Supplying MP roofing tile including all cost of materials and conveyance

OD42917/2021-2022:Supplying MP Ridge tile including all cost of materials and conveyances

OD42067/2021-2022:Engaging carpenter for various works

OD42073/2021-2022:Engaging labour for various work

OD42076/2021-2022:Engaging Plumber for various work

OD42105/2021-2022:Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a PVC hollow section o size 59x24 mm and wall thickness 1.3 mm (+0.2mm). The styles and rails mitred and joint at the corners by means of M.S. galvanized/plastic brackets of size 75x220 mm having wall thickness1.0 mm and stainless screws.The styles of the shutter reinforced by inserting galvanised M.S. tube of size20x20 mm and 1 mm (0.1mm) wall thickness at hinge side.the shutter frame filled with a PVC multi-chambered single panel of size not less than 686 mm,having over all thickness of 20 mm and 1 mm(0.1 mm) wall thickness. including 100 mm aluminium handles and 150x10 mm tower bolt complete as per manufacturers specification and direction of Engineer in charge (For W.C.and bath room door shutter

OD42123/2021-2022:Providing and fixing PVC door frame made PVC door shutters made of PVC extruded sections having an over all dimension 48x40mm (tolerance+1mm) with wall thickness 1.5 mm (0.2mm) . corners of the door frame to be jointed with galvanized brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 20x20 mm and 1 mm( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per direction of Engineer in charge Extruded section profile size 48x 40 mm.

50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.10.1:Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

18.15.1:Providing and fixing brass bib cock of approved quality :15 mm nominal bore

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White

17.20.2:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:Black solid plastic seat with lid

17.28.1.1:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe32 mm dia

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

50.2.33.5:Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.

50.2.33.6:Cutting branches of trees overhanging above any structures of girth between 60cm to 90cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete

50.2.33.7:Cutting branches of trees overhanging above any structures of girth between 90cm to 120cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.

SREEKUMAR V

Bidder Name

B K JAYAKUMAR

SREEKUMAR V