for WORKS ADVERTISED TENDER FOR FABRICATION WORKS OF VARIOUS LINE MATERIALS (ITEMS) IN BODELI STORE OF BODELI (O&M) DIVISION. (Rates are with GST) cost data 2024-25

Item Code DESCRIPTION UNIT QTY AMOUNT IN

1 2609000034 11 KV V CROSS ARM - MS ANGLE No. 12000 61.36

2 2601000084 TOP CLAMP FOR PSC POLES FOR 11KV No. 12000 18.88

C CLAMP FOR LT SHACKLE

2601000040 INSULATOR-MS 8000 5.9

4 2614000002 ANCHOR RODS No. 8000 18.88

5 2614000009 TURN BUCKLE MS 16MM No. 8000 18.88

6 SIDE CLAMP PSC- C CLAMP FOR PSC No.

7 2601000069 STAY CLAMP FOR PSC POLES pair 10000 18.88

8 2614000012 EYE BOLT WITH NUT No. 8000 35.4

9 9FT TOP ANGLE - MS ANGLE TOP FAB No.

10 2613000002 THREE HOLE PATTI No. 1000 5.9

11 5FT TOP/TAPPING ANGLE - M.S. ANGLE No.

2609000016 CROSS ARM FAB 1500 MM 5 FT 3000 21.24

12 MS ANGLE FABRICATED 50X50 MM FOR No.

3611000029 CROSS BRACING 11K 6000 23.6

13 M.S. ANGLE CROSS ARM FAB 1350 MM No.

14 SIDE ANGLE 2FT - MS ANGLES CROSS No.

2609000004 ARM FABRICATED 600 MM-2 FT 2000 17.7

SIDE CLAMP RSJ - C CLAMP FOR

15 116X100MM GIRDER POLES - SIDE No.

STAY CLAMP FOR 116 X 100 MM

2601000071 GIRDER POLE SA 2000 18.88

901000024 G I EARTHING COIL 8 SWG 15000 15.045

2609000048 11KV EXTENSION V CROSS ARM 350 233.64

EXECUTIVE ENGINEER (O&M)

Schedule showing the materials to supplied by

Madhya Gujarat Vij Company Limited

At department store Bodeli Division.

1. All required fabrication Materials such a. M.S.Angle 65x65x6mm

b. M.S. Angle 50x50x6mm

c. M.S.Bar 16mm2

d. M.S.flat 50x6mm

e. M.S.Chennel 100x50x6mm

2. Rate of Which the Materials be Free items

charged to contractor

3. Store at which materials be supplied All required materials will be issued by Bodeli

4. Sales Tax No.

1 The case, the prescribed steel size section is not available than, the alternate section

available shall be issued for fabrication for which, no additional rate shall be granted.

2. The Contractor has to carry out fabrication work as per specification and drawing of each

3. 1 % maximum cutting allowance (wastage) is permissible as per circular no.

MGVCL/ACE(CC)/1659 Dtd 24-29/04/2013

4. You will have to carry out the work at BODELI Store.

5. Electrical connection will be given by M.G.V.C.L. at free of cost & consumption charges

will have to be paid by you. The tariff for the connection will Be NRGP-IND .

6. You will have to paint-fabricated material with two coat of red oxide and fabricated material

will have to be stacked by you in our store as per instruction of officer in charges.

EXECUTIVE ENGINEER (O&M)

SIGNATURE OF CONTRACTOR

WITH PUBBER STAMP