Construction of Degree College at Rey in Tehsil Fatehpur Distt Kangra HP

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 1 : 6 (one cement isto six sand) in super structure above plinth level upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing and laying 15 mm (fifteen millimeter) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of material with in all leads , lifts and other incidental charges as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST

Providing& fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm (four millimeter) thick glass panes design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Suspended floors, roofs, landings, balconies and access platform etc (square rectangular or polygonal in plan) in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing and laying Tor steel reinforcement of TaTa /Sail for Reinforced Cement Concrete work including bending, binding straigthing and placing in position complete including cost of binding wire and other incidentals up to all floor levels complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work roof landing etc in all depths/ thickness up to all floor level as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing second class Deodar wood work in frames of doors, windows, clerestory, windows and other frames fixed in position including carriage of materials within all leads, lifts and other incidental charges as per HPPWD specifications, approved drawing,design or as directed by the Engineer-in- Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing and fixing second class deodar wood 25mm ( twenty five milimetre ) thick panelled glazed or panelled and glazed shutters for almirah etcra including bright finished hinges as per HPPWD specifications, approved drawing, design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST. Providing and fixing cup board shutters 25 mm (twenty five millimeter) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm (twenty five millimeter wide into twelve millimeter) thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing and fixing 19mm ( nineteen milimetre ) thick water proof termite resistant commercial board shutter of SDB and from all sides finished with 6mm thick hard wood edging and out side shall be finished with 1mm thick lamination of approved shade and PGI sheet lining from inside of shutteras per HPPWD specifications approved drawing,design or as directed by the Engineer-in- Charge, including carriage of materials within all leads, lifts.The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.

Providing and fixing cup board shall be made of 19mm ( nineteen milimetre ) thick water proof resistant commercial board of uniply/green ply/Action tera ISI marked is No.1659 including shalves, back side of cup board shall have 6mm thick water proof ply and all cut portion of board shall have 6mm thick hard wood edging and the shutter from all sides shall also have 6mm thick hard wood edging. The shutters from outside shall be finished with 1mm thick lamination ISI marked IS No. 12823 of approved shade of Kitvista of kit ply/Uni ply/Green ply as per HPPWD specifications, approved drawing,design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax and any other taxes imposed by the Government but excluding GST.