REPAIRS TO LEAKAGE/SEEPAGES FROM SUNKEN OF BATH/WCs, PLUMBING, SANITARY FITTINGS, CLEANING OF SERVICE TANKS ETC IN CERTAIN OMQs AND SMQs AT SECTOR 31 UNDER GE (AF) MC CHANDIGARH

Amount

Demolition of lime concrete / lean concrete /Brick bats etc. from sunken slab portion exc. 15 cm thick but above ground floors, complete all as specified and directed by Engineer-in-charge including removal of demolished material from MD land debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete complete all as specified and directed by Engr-in-charge.all as specified.

M & L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in flooring laid in slope complete all as specified and directed by Engineer- in-charge.

M&L lean concrete type E-2 (1:5:10) using using 40mm brick aggregate as in sunken portion complete all as specified and directed by Engineer-in-charge.

M & L for 40mm GI medium grade Spout pipe for sunken work complete.

M&L for providing water proofing tratment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make asapproval in Technical Instruction 5/2003 by adding: (a) 15mm thick plaster (1:4) cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall / beam , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allwed to dry. (Note: Water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @0.5 kg/ sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.25 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @0.25 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.15 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs. complete all as specified and directed by Engineer-in-charge. NOTE : Floor area of the sunken slab shall be measured only. Make of Acrylic based polymer modified cementitious compound - Fosroc ( Brushbond) /Sika (Sikatop-100) or Pidilite.

Supply only water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.

S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, complete all as specified and directed by Engr-in-charge.

All as per item No. 7 here-in-before but 75 mm dia

Fixing only in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge.

Fixing only in repair 75 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge.

S&F 100 mm cast iron bends complete all as specified

S&F 75 mm cast iron bends complete all as specified

S & F branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallelbranches 100 mm dia complete all as specified and directed by Engr-in-charge.

S & F branch pieces, single (equal or unequal),ordinary or inverted(spigot or socket type)or with parallelbranches 75 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs 75 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified

S&F in repairs 100 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified

Fixing only in repair 100 mm cast iron bends/Tee/cowls after necessary cleaning complete.

All as per item No. 17 here-in-before but 75 mm dia

M & L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar having superficial area not exceed 150 Sqcm each. making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified

Cutting of bushes / peepal small tree protuding over wall surface/roof surface/terrace of building of height up to 10.0 metre including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site, complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed by Engr-in-charge.

S&F in repair for 110mm PVC (SWR) T equal and unequal complete all as specified

S&F in repair for 110mm PVC (SWR) bends any radius complete all as specified

Taking up or down GI steel/ Kitek tubing 15 mm with connections or fittings from wall, ceiling, floor etc complete all as specified

Taking up or down GI steel/ Kitek tubing 20 mm with connections or fittings from wall, ceiling, floor etc complete all as specified

S & F GI water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor or fixed to wall complete all as specified

S & F GI water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling complete all as specified

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, exc 10 cm but n. exc 20 cm girth

Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc , complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 15mm thick in cement mortar 1:4 on brick work, concrete, R.C.C. Surfaces on mumty , parapet or similar surfaces at any height finished even and fair without using extra cement of ,up to height 12 metre , complete all as specified and directed by Engr-in-Charge.

M&L Rendering 15mm thick on brick surfaces of wall in cement mortar (1:6), finished even and smooth without using extra cement, cement plaster and racking out joints, hacking for key scrubbing down with water etc , complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-In-Charge. .

M&L preparation of old/new plaster surfaces and applying two coat of oil bound distemper white or tinted complete, all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster/un treated surface of wall / coloum ,beam , chajja etc. and leveling / edging the disturbed surface a thin layer of putty and making smooth by using sand paper applying two coat of extrior acylic emulsion (weather proof treatment) , to be applied using an airless spray machine , complete all as manufacturer,s instruction and as directed.

M&L prepration of new surface of ceiling and applying two coat of oil bound distemper white or tinted complete all as specifeid and directed by Engr-in-Charge.

M&L for Ist quality Glazed ceramic coloured tiles in vertical surface 300 x 450 x 8 mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles ,10 mm thick for wall finished in cement mortar 1:4 , including dismantaling tiling incl cement mortar bedding ( but not backing ) removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete complete all as specified and directed by Engr-in-charge. Note : MTC to be provided by the contractor.

M&L for Ist quality Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in cement mortar 1:6 including dismantaling tiling incl cement mortar bedding ( but not backing ) removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. Note : MTC to be provided by the contractor.

M&L for Ist quality Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in cement mortar 1:6 including dismantaling tiling incl cement mortar bedding ( but not backing ) removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. Note : MTC to be provided by the contractor.

S&F in repair of vitreous china One piece EWC standard size wall hanging/floor mounted white/ivory colour with dual flusing cistern white including CI "P" or "S" trap, fixed as complete all as specified and directed. Make : Parryware/Cera/ Jaguar etc.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern ) including connection to drain and flushing pipe antisyphonic pipes etc

S&F PVC syphonic action type flushing cistern 10 lts capacity ,low level with inlet ,ball valve float and bracket with complete fitting complete all as specified and directed.

S&F 15 mm fancy type Stop valves cast copper alloy chromium plated with long shank and Cup ( Concealed Type) screwed down high pressure with crutch both ends for iron pipes or for union and fixed.

S&F 15 mm fancy type Stop valves (angle valves) cast copper alloy, chromium plated screwed down high pressure with crutch both ends for iron pipes or for union and fixed

S&F 15 mm Bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair

S&F in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwed down for iron pipes for complete all as specified and directed.

S&F in repairs 15 mm brass chromium plated centre hole WHB mixer for mixing Hot and Cold water screwed down for iron pipes complete all as specified

S&F in repairs Vitreous china wash hand basin ,flat back size 550 mm X 400 mm including Bracket cutting in wall and pinning in ends of bracket or erecting stand with PCC 1:2:4 Type B1 , including waste coupling and waste pipes complete all as specified

S&F PVC connection 15 mm size with PTMT nuts of lengh 450 mm long complete all as specified

S&F health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 metre length complete all as directed by Engr-in -Charge.

S&F in repairs Plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs Chromium plated shower roses swivel shower brass chromium plated with arm 100 mm size for fixing with 15 mm pipes with swivel joints ,any size including fixing to steel pipes or union.

S & F PVC Bath Room cabinet ( standard size- with looking mirror & shelves fixed in repair complete all as specified and directed by Engr-in-charge.

S&F Grating doom 125 mm dia with or without waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete. (Minimum weight 40 gms) complete all as specified and directed by Engr-in-charge.

S&F PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB fixed in repairs complete all as specified and directed by Engr-in-charge.

All as per Item 56 here-in-before but 40mm dia for sink complete all as specified and directed by Engr-in-charge.

S&F Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed in repairs complete all as specified and directed by Engr-in-charge.

All as per item no 58 here-in-before but 40mm dia (minimum weight 60 gms) for Steel Sink complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (Below or above ground level) complete removing out site of defence land, complete all as specified and directed.by Engr-in-charge.

M & L for 75mm thick cement concrete type B- 1, 1:2:4 (20mm graded crushed stone aggregate) as in flooring laid in slope and alternate bays, complete all as specified and directed by Engineer- in-charge.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc., complete including removing the waste materials to a distance of 500 metres complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius in cement mortar 1:4 for working height up 03 storeyed building complete all as specified and directed by Engr-in-Charge.

All as per item No 63 here-in-before but except bricks.

S&F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with close top), HDPE, triple layered white colour with ISI marked of 500 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 15 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 20 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F sinks with drainage board made of stainless steel 0 .8mm thick kitchen or laboratory with plugs, washers and CP waste coupling and 40 mm PVC waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm ,thickness 3-4mm,500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm fixed in repairs.

S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings, nut/ bolts.

M&L for disconnecting of PVC tank of capacity exc 500 Ltrs but not exc 1000 Ltrs for tank cleaning all as specified and directed :- a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank d) Refixing the tank in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as directed by engr-in-charge. Note : - Water proofing treatment, PCC bench, pipes if required to be replaced shall be measured and paid separately under relavent items.

Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimney and similar suspended work at any height complete all as specified and directed by Engineer-in-Charge.

Formwork to chullah hoods, chajjas,facia, troughs and similar, items in cluding edges,including stagging and scafolding up to 10 mtr heights, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height, complete all as specified and directed by Engr in Charge.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr in Charge.

M&L for mild steel work in roof/Chhajja trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , fixed with using dead fastern of 150mm long , including distance pieces, cleats etc., conforming to Fe 410-W(Gde-E- 250) quality-A complete all as specified and directed by Engr in Charge.

S&F Pre- painted galvalume aluminum zinc coating (AZ 150 ) GI based corrugated steel sheet ( any shape) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie and directed by Engr in Charge.

Pre-painted galvalume aluminum zinc coating (AZ 150 ) GI based Plain steel sheet ( any shape) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling of precast cement concrete louvres and jallies from shaft portions, any thickness up to height 10 mtr ,including necessary scafolding/form work etc, complete removing out site of defence land, complete all as specified and directed.

Removal of Debris /demolished material out of MOD land upto 5KM from the starting point of collection.

S&F 25mm dia SS drapery rod in repair including all fittings like finel, brackets, holders etc complete all as specified and directed by Engr-in-charge.

Note:- Amount of credit of Rs. 19500.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

MS FUTEC ENGINEERS (BID ID -3174418)

Supreet Associates (BID ID -3171732)

jmv engineers (BID ID -3179786)

SHRI GANESH CONSTRUCTION CO. (BID ID -3179316)

MOHAMMAD RASHID (BID ID -3179898)

KUMAR AND COMPANY (BID ID -3174659)