BEAUTIFICATION WORK SUCH AS FOOTPATHS, PLANTATION POCKET GARDENS, DRAINAGE,ETC. RABARIVAS ROAD IN THE MORBI MUNICIPAL CORPORATION AREA.

NAME OF WORK :- BEAUTIFICATION WORK SUCH AS FOOTPATHS, PLANTATION POCKET GARDENS,

DRAINAGE,ETC. RABARIVAS ROAD IN THE MORBI MUNICIPAL CORPORATION AREA.

RECAPITULATION SHEET

Sr No. Description Amount

1 CLEARING,DISMENTALING & TRAFFIC MANAGEMENT ₹

2 PAVING BLOCK & KERB STONE ₹

3 URBAN FURNITURE ₹

4 PARKING AND PATCH PAVEMENT WORK ₹

5 ROAD MARKING ₹

7 STORM WATER DRAINAGE WORK ₹

8 UTILITY WORK ₹

10 WATER SUPPLY ₹

11 TREES & PLANTATION ₹

12 ELECTRICAL WORK ₹

MORBI MUNICIPAL CORPORATION

NAME OF WORK :- BEAUTIFICATION WORK SUCH AS FOOTPATHS, PLANTATION POCKET GARDENS, DRAINAGE,ETC. RABARIVAS ROAD IN THE

MORBI MUNICIPAL CORPORATION AREA.

Sr No. Description Unit Quantity Rate Amount Item No.

CLEARING,DISMENTALING & TRAFFIC

Clearing and grubbing road land including uprooting

rank vegetation grass bushes,shrubs,sapling and

trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable

materials (C) By mechanical means in area of light

Demolition including stacking of serviceable R&B 2024-25

2 materilas anddisposal of unserviceable materials Cum. 300.00 ₹ 1,071.63 ₹ 321,489.00

with all lead and lift. (i) R.C.C. work Pg No.

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

Supplying Plastic Traffic cone 750 mm height with RMC

Reflected tap and RMC name or logo and with BANDHKAM

4 rubber baseincluding 3.00 mt length plastic chain Nos. 100.00 ₹ 569.00 ₹ 56,900.00 2023-24

Providing and Supplying of sefaty Barrigate Tape RMC

250.00 mt. length BANDHKAM

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. Thickness including

watering, ramming and consolidating etc. complete.

Removal work of Interlocking block RMC

PAVING BLOCK & KERB STONE

Excavation of Foundation in Hard Murrum from 0.0 RMC

mtr. to 1.50 mtr depth including dewatering with BANDHKAM

8 lifting and laying in RMC limit as instructed Cum. 585.00 ₹ 141.00 ₹ 82,485.00 2023-24

Rolling work with Roller 8-10 Ton capacity over RMC

metalling murrum for soling or single layer arriving BANDHKAM

9 proper compaction (with watering) Sqm. 1170.00 ₹ 9.00 ₹ 10,530.00 2023-24

Construction of granular sub-base by providing

close graded material, mixing in a mechanical mix RMC

plant at OMC, spreading in uniform layers with BANDHKAM

10 motor grader on prepared surface and compacting Cum. 176.00 ₹ 1,184.00 ₹ 208,384.00 2023-24

with vibratory power roller to achieve the desired 439D

density complete (Grade-II) Pg No.

Construction of granular sub-base by providing

close graded material, mixing in a mechanical mix RMC

plant at OMC, spreading in uniform layers with BANDHKAM

11 motor grader on prepared surface and compacting Cum. 176.00 ₹ 1,215.00 ₹ 213,840.00 2023-24

with vibratory power roller to achieve the desired 439C

density complete (Grade-I) Pg No.

Providing and laying cement concrete 1:3:6 (1-

Cement : 3 coarse sand : 6- hand broken stone R&B 2024-25

12 aggregates 40 mmnominal size) and curing Cum. 146.00 ₹ 3,064.60 ₹ 447,431.60 05003A

complete excluding cost of formwork in (A) Pg No.

Foundation and Plinth

Providing and laying 60 mm thick factory

manufactured coloured cement concrete paver

blocks of approved make, size (300×300 mm,

150×150 mm and 150×75 mm) and colour

(Terracotta, Gray, Beige and Indigo etc.),

conforming to IS 15658, water absorption not

exceeding 6% by mass, and dimensional tolerances

as specified in relevant standards. Colour shall be

integral, uniform, and resistant to fading, and blocks

shall be free from cracks, chips, honeycombing, or

surface defects. The item shall include supply of

paver blocks, loading, unloading, stacking, provision

and laying of sand bedding (Zone II) , placing of

paver blocks in approved geometric pattern and

alignment, maintaining uniform joint gaps, filling

joints, plate compaction with suitable mechanical

compactor, and finishing complete, laid true to line,

level, and slope as per drawings and directions of

Engineer-in-Charge. Item includes all labour,

materials, tools, and incidental works complete

Providing and laying 60 mm thick hexagonal

concrete cobble stone paver blocks of approved

colour and pattern in circular / radial design as per

drawing, over prepare base including 20 mm thick

sand bedding layer, joint filling with fine sand,

proper compaction using plate compactor, cutting

of pavers for circular geometry, alignment, leveling,

and finishing complete as directed by Engineer-in-

Supplying and fixing precast cement concrete Half

Batter (HB) blocks Type ‘A’ of size 600 mm (length)

× 450 mm (height) × 150 mm (thickness)

manufactured by Vacuum Wet Press (VWP) process

from approved manufacturer, laid true to line, level

and curvature with joints filled in cement mortar,

including loading, unloading, handling, placing,

alignment, finishing of exposed faces, curing,

stacking at site and all incidental charges complete

as directed by Engineer-in-Charge.

Double coat enemal paint with primer coat

URBAN FURNITURE

Excavation of Foundation in Hard Murrum from 0.0 RMC

mtr. to 1.50 mtr depth including dewatering with BANDHKAM

17 lifting and laying in RMC limit as instructed Cum. 108.00 ₹ 141.00 ₹ 15,228.00 2023-24

Rolling work with Roller 8-10 Ton capacity over RMC

metalling murrum for soling or single layer arriving BANDHKAM

18 proper compaction (with watering) Sqm. 243.00 ₹ 9.00 ₹ 2,187.00 2023-24

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone R&B MORBI SOR

19 aggregates 40 mm nominal size) and curing Cum. 26.00 ₹ 2,742.27 ₹ 71,299.02 ITEM CODE-

complete excluding cost of formwork in (A) 05004A

Foundation and Plinth

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. R&B MORBI SOR

20 in foundation and plinth in Cement Mortar 1:5. (1- Cum. 243.00 ₹ 4,203.06 ₹ 1,021,343.58 ITEM CODE-

Cement : 5 -fine sand)(B) Conventional 06001BA

Providing 20mm thick cement plaster in single coat

on single or half brick walls for interior plastering R&B MORBI SOR

21 upto floor two level and finished even and smooth Sqm. 980.00 ₹ 228.22 ₹ 223,655.60 ITEM CODE-

in (i) Cement mortar 1:3 (1 cement:3-sand) 17003A

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing and executing traditional decorative

mural artwork painting in multicolour

geometric/heritage patterns on any prepared

plastered surface, including surface preparation,

cleaning, rubbing, crack filling with wall putty,

application of exterior grade primer, base coat and

multicolour weather-resistant acrylic emulsion

paint, including design layout marking, stencil

preparation, hand painting by skilled artists,

finishing coats, scaffolding, labour, materials, tools,

curing, protection and complete execution as per

approved design and direction of engineer-in-

charge, complete in all respects.

Providing and fixing precast RCC backless seating

bench of 1800 mm length made of M30 grade

reinforced cement concrete with smooth mould

finish, including RCC seat slab and side supports

reinforced with required steel reinforcement,

finished with weather resistant exterior paint /

24 texture finish, including formwork, reinforcement, Nos. 10.00 ₹ 4,200.00 ₹ 42,000.00 MR

curing, transportation, placing in position, fixing

with cement mortar base, labour, materials and

complete installation as per approved design and

direction of engineer-in-charge, complete in all

Supply & Fixing of Granite Stone (Telephone Black RMC SOR 2023-

Color) on wall after rough cast Cement Plaster in

proportion of 1:3 and fixing grainage in Cement It No.148

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and Excluding reinforcement for

reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete.(Raft

Providing TMT Bar FE 550D reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level

Providing, carving, supplying and installing artistic

hand sculpture with flying birds made from

approved quality black natural stone, overall height

8 ft (approx. 2.4 m), including sculpting, finishing,

polishing, transportation to site, lifting, installation

on RCC pedestal foundation, fixing with stainless

28 steel anchor bolts and base plate, grouting with non- Job 1.00 ₹ 1,010,000.00 ₹ 1,010,000.00 MR

shrink grout, alignment, cleaning and protection of

finished work, including all materials, labour, tools,

machinery and complete execution as per approved

design and direction of Engineer-in-Charge,

complete in all respects.

Design, manufacture, supply and installation of

premium outdoor litter bin of approx. 80 litre

capacity, comprising internal removable MS waste

container made from minimum 1.6 mm thick CRCA

sheet with powder-coated finish, enclosed with

vertical hardwood slats of minimum 25 mm

29 thickness fixed on MS frame, including laser-cut top Nos. 15.00 ₹ 20,000.00 ₹ 300,000.00 MR

cover with waste opening, concealed

hinges/handles, corrosion-resistant fasteners, anti-

termite treatment to wood, exterior weather-

resistant coating, complete with all civil work in all

respects as per approved design and drawings

Supply and fixing of factory-manufactured precast

cement concrete Tree Guard, overall

size800mm×800mm× 75mmthickwith circular inner

openingof 500mmdiameter,ofapproved design and

pattern as shown in drawings. Tree guard shall be

manufactured using controlled design mix concrete

of minimum M30grade through precast / machine-

cast process, properly compacted to achieve dense,

30 durable units. Finished units shall be true to shape Nos. 15.00 ₹ 1,500.00 ₹ 22,500.00 MR

and dimensions, with smooth finish, uniformcolour,

sharpedges, and free fromcracks, honeycombing,

warping, or any surface defects. Itemincludes

supply, loading, unloading, and stacking at site

complete, but excludes excavation, bedding, fixing,

jointing, installation, andall other civil works

Providing, casting, supplying and installing GFRC

(Glass Fibre Reinforced Concrete) Bollards of

approved design and finish, having overall height

1200 mm, equilateral triangular cross-section with

each side measuring 300 mm, slightly tapered

profile as per approved drawing, manufactured

using white cement based GFRC mix with alkali-

resistant glass fibres, minimum compressive

strength 25 MPa, complete with smooth fair-faced

31 finish, chamfered edges, internal MS reinforcement Nos. 30.00 ₹ 11,615.00 ₹ 348,450.00 MR

cage as required. The bollard shall be fixed in

position over RCC foundation block of suitable size

(minimum 450 mm × 450 mm × 450 mm or as

approved), including alignment, plumbing, grouting

with non-shrink grout, curing, surface protection

and all labour, tools, tackles and materials complete

as directed by Engineer-in-Charge.

Providing, fabricating, supplying and fixing M.S.

railing of height 1.20 m consisting of vertical M.S.

bars/pickets of 16–20 mm dia or equivalent square

section at suitable spacing, welded to horizontal

M.S. flat/rectangular sections forming panels,

including M.S. posts of suitable size fixed at regular

intervals, complete with base plates, anchor bolts,

welding, grinding, surface preparation, one coat of

anti-corrosive primer and two coats of synthetic

enamel paint or powder coating in approved colour,

fixing in position over concrete/stone surface with

necessary fasteners, alignment and finishing,

including all fittings, complete in all respects as

directed by Engineer-in-Charge.

Providing, fabricating and erecting decorative CNC

laser cut mild steel jali panels using 4–6 mm thick

MS sheet with MS box section frame (minimum

40×40×3 mm) including cutting, welding, grinding,

33 stiffeners, fixing brackets, anchor bolts, Kg. 3840.00 ₹ 265.00 ₹ 1,017,600.00 MR

transportation and installation in position as per

approved design and direction of Engineer-in-

Charge, complete in all respects.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and R&B 2024-25

34 other foreign matter and scoured with brushes fine SqM. 192.00 ₹ 36.06 ₹ 6,923.52

steel wood, scrapers and sand paper with ready Pg No.

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter.

PARKING AND PATCH PAVEMENT WORK

- CEMENT CONCRETE PAVEMENT

Excavation of Foundation in Soft Murrum, Soil or RMC

Sand from 0.0 mtr. to 1.50 mtr depth including BANDHKAM

36 dewatering with lifting and laying in RMC limit as Cum. 60.00 ₹ 133.00 ₹ 7,980.00 2023-24

Excavation of Foundation in Hard Murrum from 0.0 RMC

mtr. to 1.50 mtr depth including dewatering with BANDHKAM

37 lifting and laying in RMC limit as instructed Cum. 60.00 ₹ 141.00 ₹ 8,460.00 2023-24

Rolling work with Roller 8-10 Ton capacity over RMC

metalling murrum for soling or single layer arriving BANDHKAM

38 proper compaction (with watering) Sqm. 150.00 ₹ 9.00 ₹ 1,350.00 2023-24

Plant Mix Method (Construction of granular sub-

base by providing close graded Material, mixing in a

mechanical mix plant at OMC, carriage of mixed

Material to work site,spreading in uniform layers

39 with motor grader on prepared surface and Cum. 23.00 ₹ 1,020.86 ₹

compacting with vibratory power roller to achieve

the desired density, complete as per clause 401 )

for grading- I Material

Wet Mix Macadam laying using by Grader

(Providing, laying, spreading and compacting graded

stone aggregate to wet mix macadam specification

including premixing the Material with water at OMC NH SOR

in mechanical mix plant carriage of mixed Material 2023-24

by tipper to site, laying in uniform layers with paver 4.14.B

in sub- base / base course on well prepared surface Pg no.28

and compacting with vibratory roller to achieve the

desired density.)

Dry Lean Cement Concrete Sub- base (Construction

of dry lean cement concrete Sub- base over a

prepared sub-grade with coarse and fine aggregate

conforming to IS: 383, the size of coarse aggregate

not exceeding 25 mm, aggregate cement ratio not

to exceed 15:1, aggregate gradation after blending

to be as per table 600-1, cement content not to be

41 less than 150 kg/ cum, optimum moisture content Cum. 23.00 ₹ 2,157.46 ₹

to be determined during trial length construction,

concrete strength not to be less than 10 Mpa at

days, mixed in a batching plant, transported to site,

laid with a paver with electronic sensor, compacting

with 8-10 tonnes vibratory roller, finishing and

Cement Concrete Pavement (Construction of un-

reinforced, dowel jointed, plain cement concrete

pavement over a prepared sub base with 43 grade

cement @ 400 kg per cum, coarse and fine

aggregate conforming to IS 383, maximum size of

coarse aggregate not exceeding 25 mm, mixed in a

batching and mixing plant as per approved mix

design, transported to site, laid with a fixed form or

42 slip form paver, spread, compacted and finished in a Cum. 30.00 ₹ 6,419.89 ₹

continuous operation including provision of

contraction, expansion, construction and

longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant, debonding

strip, dowel bar, tie rod, admixtures as approved,

curing compound, finishing to lines and grades as

Road marking with hot applied thermoplastic paints

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising

glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra

patta /bump patta lane/center line/ edge line/cut

patta. The white color marking should provide

liminance coefficinet on cemend road shalll be min

130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day

time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity

and skid resistance as mentioned in the section-15

of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

Road Markers/Road Stud with Lense Reflector

(Providing and fixing of road stud 100x 100 mm, die

cast in aluminium, resistant to corrosive effect of

salt and grit, fitted with lense reflectors, installed in

44 concrete or asphaltic surface by drilling hole 30 mm No. 60.00 ₹ 621.00 ₹

upto a depth of 60 mm and bedded in a suitable

bituminous grout or epoxy mortar, all as per BS

Painting Lines, Dashes, Arrows etc on Roads in Two

Coats on Old Work (Painting lines, dashes, arrows

etc on roads in two coats on old work with ready NHAI SOR

mixed road marking paint confirming to IS: 164 on 2023-24

bituminous surface, including cleaning the surface It No.8.11[i]

of all dirt, dust and other foreign matter, Pg No.

demarcation at site and traffic control )Over 10 cm

Providing and applying artistic zebra crossing /

pedestrian crossing road painting in approved

decorative patterns and colours using two-

component Polyurethane (PU) road marking paint,

on prepared asphalt / concrete road surface,

including mechanical cleaning, surface preparation,

primer application (where required), masking,

46 layout marking, application of PU paint in multiple SqM. 98.00 ₹ 1,375.00 ₹ 134,750.00 MR

coats to achieve uniform opacity and colour

sharpness, incorporation of anti-skid aggregate in

final coat, curing, protection during setting period

and making good, complete in all respects as per

approved design, drawings and directions of

Engineer-in-Charge

Providing and fixing factory-manufactured

Polyurethane (PU) tactile tiles of size 300 mm ×

mm, minimum 7–8 mm thickness, directional type

with raised rib pattern for visually impaired

guidance, conforming to relevant IRC / accessibility

guidelines, in approved yellow colour, having anti-

skid, UV-resistant, weather-resistant and abrasion-

resistant properties, suitable for exterior roadside

footpath application, fixed over existing PCC /

finished concrete surface by surface preparation,

cleaning and leveling, applying high-strength

polyurethane adhesive, and additionally securing

each tile with stainless steel screws with nylon

anchor fasteners by drilling holes in concrete

substrate, ensuring proper alignment, uniform level,

tight joints and straight layout, including all cutting,

edge finishing, wastage, tools, tackles, labour,

drilling, anchoring, adhesive, cleaning and all

incidental charges complete as directed by Engineer-

Cautionary Warning Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 90 x 90 x

cms. equilateral triangle as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with R&B 2024-25

48 bestquality epoxy coatings in black and white bends. Nos. 10.00 ₹ 3,867.51 ₹ 38,675.10 It No.26092B

The details of symbol for each board shall be as per Pg No.189

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Facility Informatory Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 80 x 60 cms.

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with R&B 2024-25

49 bestquality epoxy coatings in black and white bends. Nos. 10.00 ₹ 3,951.13 ₹ 39,511.30 It No.26093B

The details of symbol for each board shall be as per Pg No.190

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Regulatory / Mandatory Sign :-Providing and fixing

sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size 60 cms.

Dia Circle as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of

best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with R&B 2024-25

50 bestquality epoxy coatings in black and white bends. Nos. 10.00 ₹ 3,505.07 ₹ 35,050.70 It No.26094B

The details of symbol for each board shall be as per Pg No.191

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

STOP Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 90 cms. Octagonal as per

design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with R&B 2024-25

51 bestquality epoxy coatings in black and white bends. Nos. 10.00 ₹ 6,637.98 ₹ 66,379.80 It No.26095B

The details of symbol for each board shall be as per Pg No.192

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Parking Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size size 60 x 60cms. sequare plus

60 x 20cms rectangular additional plate as as per

the design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size R&B 2024-25

52 iron angle of 35 x 35 x 3mm; painted with Nos. 10.00 ₹ 4,351.31 ₹ 43,513.10 It No.26096B

bestquality epoxy coatings in black and white bends. Pg No.193

The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting.

Direction (Junction) Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 244x122

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable

size iron angle of 50x50x5mm; painted with R&B 2024-25

53 bestquality epoxy coatings in black and white bends. Nos. 2.00 ₹ 21,076.74 ₹ 42,153.48 It No.26098B

The details of symbol for each board shall be as per Pg No.195

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Distance Informatory / Destination Sign : Providing

and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size

180x120 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm; R&B 2024-25

54 painted with bestquality epoxy coatings in black and Nos. 2.00 ₹ 18,073.46 ₹ 36,146.92 It No.26099B

white bends. The details of symbol for each board Pg No.196

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size

x 45 x 60 Cms. for each leg including excavation,

curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer

& a certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Place Identification Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 150x90 cms.

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with R&B 2024-25

55 bestquality epoxy coatings in black and white bends. Nos. 2.00 ₹ 12,219.33 ₹ 24,438.66 It No.26100B

The details of symbol for each board shall be as per Pg No.197

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Village name/ Bump Ahed sign :-Providing and fixing

sing boards made out of 2mm aluminium sheet; size

90 x 60cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as

per IRC-30-1968, 3.1m long (2 nos) stand post and

frame fabricated from suitable size iron angle of 50 R&B 2024-25

56 x 50 x 5mm painted with best quality epoxy coatings Nos. 10.00 ₹ 4,995.41 ₹ 49,954.10 It No.26101A

in black and white bends. the details of symbol or Pg No.197

inscription / numerals for each board shall be as per

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

Hazard Marker Sign :-Providing and fixing sign

boards made out of 2.0 mm aluminium sheet /

mm ACP (Aluminum composite Panel); size 90x30

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with R&B 2024-25

57 bestquality epoxy coatings in black and white bends. Nos. 5.00 ₹ 3,483.85 ₹ 17,419.25 It No.26102B

The details of symbol for each board shall be as per Pg No.199

the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Men at work (Folding) sign :-Providing and fixing

sign boards made out of 2.0 mm aluminium sheet /

4 mm ACP (Aluminum composite Panel); size

60x60x60cm equilateral Triangular as per design of

IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade

retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.3 mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35x35x3mm; painted

with bestquality epoxy coatings in black and white

bends. the details of symbol or inscription /

numerals for each board shall be as per the

instruction of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for

the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective

Four/Two lane Ahed sign :-Providing & Fixing sign

boards made out of 2mm aluminium sheet, size

x 120 cms square plus 120 x 60cms additional plate

as per the attached drawing pre treated with

phosphetingg process & acid etching. coated with

one coat of epoxy priemr and two coats of best

quality epoxy paint reflectorised with retro sheeting

as per latest M.O.S.T. Specifications; Letters and

numerals should be as per IRC-30-1968,3.1m long R&B 2024-25

59 (2nos) stand post and frame fabricated either from Nos. 5.00 ₹ 11,380.51 ₹ 56,902.55 It No.26111A

iron angle of 50x50x5mm, 75x75x6mm as required, Pg No.207

painted with best quality epoxy coating in black and

white bends The fixing at site shall be in 1:2:4 CC

block of size 45 x 45x 60cms for each leg, including

excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer

Diversion sing board :-Providing & Fixing sign boards

made out of 2mm aluminium sheet, size 180 x

cms. rectangle as per the attached drawing pre

treated with phospheting process & acid etching.

coated with one coat of epoxy priemr and two coats

of best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as

per IRC-30-1968,3.1m long (2nos) stand post and

frame fabricated from iron angle of 35x35x3mm,

50x50x5mm painted with best quality epoxy

coatings in blak and white bends. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45x 60cms for

each leg, including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

STORM WATER DRAINAGE WORK

Excavation of Foundation in Soft Murrum, Soil or RMC

Sand from 0.0 mtr. to 1.50 mtr depth including BANDHKAM

61 dewatering with lifting and laying in RMC limit as Cum. 349.00 ₹ 133.00 ₹ 46,417.00 2023-24

Excavation of Foundation in Hard Murrum from 0.0 RMC

mtr. to 1.50 mtr depth including dewatering with BANDHKAM

62 lifting and laying in RMC limit as instructed Cum. 349.00 ₹ 141.00 ₹ 49,209.00 2023-24

CC work 1:3:6 using aggregate of size 10-20 mm, RMC

curing, finishing etc. complete (without BANDHKAM

providing bhogavo sand bedding including raming , RMC

watering, consolidating etc. complete DRAINAGE

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of the

standard design and also have corresponding

standard diameter as per length including spigot

and socket with rubberized, all taxes, insurance,

transportation, loading along with unloading and RMC

reaching the store or site and carrying out DRAINAGE

65 necessary inspections along with providing supply Rmt. 530.00 ₹ 2,125.00 ₹ 1,126,250.00 2023-24

work and required hemp, wata (from CM. 1:1) and It No.1401

also line level And complete including laying, Pg No.59

jointing, curing with required hemp in grades. for

pipe of NP - 3 class of 450 m.m. dia. only supply

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of the

standard design and also have corresponding

standard diameter as per length including spigot

and socket with rubberized, all taxes, insurance,

transportation, loading along with unloading and RMC

reaching the store or site and carrying out DRAINAGE

66 necessary inspections along with providing supply Rmt. 530.00 ₹ 201.00 ₹ 106,530.00 2023-24

work and required hemp, wata (from CM. 1:1) and It No.1402

also line level And complete including laying, Pg No.59

jointing, curing with required hemp in grades. for

pipe of NP - 3 class of 450 m.m. dia. only fixing work

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of the

standard design and also have corresponding

standard diameter as per length including spigot

and socket with rubberized, all taxes, insurance,

transportation, loading along with unloading and RMC

reaching the store or site and carrying out DRAINAGE

67 necessary inspections along with providing supply Rmt. 50.00 ₹ 2,447.00 ₹ 122,350.00 2023-24

work and required hemp, wata (from CM. 1:1) and It No.1405

also line level And complete including laying, Pg No.61

jointing, curing with required hemp in grades. for

pipe of NP - 3 class of 600 m.m. dia. only supply

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of the

standard design and also have corresponding

standard diameter as per length including spigot

and socket with rubberized, all taxes, insurance,

transportation, loading along with unloading and RMC

reaching the store or site and carrying out DRAINAGE

68 necessary inspections along with providing supply Rmt. 50.00 ₹ 279.00 ₹ 13,950.00 2023-24

work and required hemp, wata (from CM. 1:1) and It No.1406

also line level And complete including laying, Pg No.61

jointing, curing with required hemp in grades. for

pipe of NP - 3 class of 600 m.m. dia. only fixing work

Providing, laying and jointing in true line and level

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on R & B SOR

wall using of PVC clamp of the size 160 mm 2024-25

diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in Pg No.168

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Providing and constructing Sewer manholes,

scraper manholes and unit house connection

chamber, as per the type design in brick masonry in

C.M.1:5 and inside and outside 20mm thick

plastering in C.M.1:3 necessary 100mm coping with

reinforcement in R.C.C. M.

200 fixing C. I. steps and fixing manhole frame and

covers (But excludings up ply of manhole frame and

covers) over manholes and house

connection chambers and fixing Manhole covers

70 (but excluding supplying of manhole covers) over Nos. 10.00 ₹ 21,116.00 ₹

scraper manhole etc. complete,

providing and fixing safety chain wherever

necessary as per the stipulations in the type design

complete as per latest CPHEEO manual.

(excl. excavation).Manhole type "B" circular type

having inside diameter of minimum 1500 mm and

for depth from 1.5 M to 4.0 M (for 150 mm to

mm dia sewers) Manhole type "B" as above but

upto 1.5 M depth.

Constructing brick masonry road gully chamber

1100mm x 775mm including 500mm x 450mm (C.I.

horizontal grating with frame and vertical grating

Precast R.C.C circular manhole cover supply RMC

complete with fixing 600 mm diameter with 10 tone DRAINAGE

Precast R.C.C circular manhole frame supply RMC

complete with fixing 600 mm diameter with 10 tone DRAINAGE

Precast R.C.C circular manhole cover supply RMC

complete with fixing 600 mm diameter with 20 tone DRAINAGE

Precast R.C.C circular manhole frame supply

complete with fixing 600 mm diameter with 20 tone

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Renovation of manhole by increasing the height at

top including cost of excavation, refitting of C. I.

manhole frame and cover curing etc. complete incl.

all carting and providing of materials which is GWSSB

required for the purpose (except manhole frame 2022-23

and cover) It No.10

For all type manhole by providing RCC 1:2:4 Pg No.103

Partition walls with required reinforcement 25 cm

thick and circular opening with 500mm clear dia and

Excavation of Foundation in Soft Murrum, Soil or RMC

Sand from 0.0 mtr. to 1.50 mtr depth including BANDHKAM

78 dewatering with lifting and laying in RMC limit as Cum. 152.00 ₹ 133.00 ₹ 20,216.00 2023-24

Excavation of Foundation in Hard Murrum from 0.0 RMC

mtr. to 1.50 mtr depth including dewatering with BANDHKAM

79 lifting and laying in RMC limit as instructed Cum. 152.00 ₹ 141.00 ₹ 21,432.00 2023-24

CC work 1:3:6 using aggregate of size 10-20 mm, RMC

curing, finishing etc. complete (without BANDHKAM

providing bhogavo sand bedding including raming , RMC

watering, consolidating etc. complete DRAINAGE

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of the

standard design and also have corresponding

standard diameter as per length including spigot

and socket with rubberized, all taxes, insurance,

transportation, loading along with unloading and RMC

reaching the store or site and carrying out DRAINAGE

82 necessary inspections along with providing supply Rmt. 530.00 ₹ 1,027.00 ₹ 544,310.00 2023-24

work and required hemp, wata (from CM. 1:1) and It No.1395

also line level And complete including laying, Pg No.56

jointing, curing with required hemp in grades. for

pipe of NP - 3 class of 300 m.m. dia. only supply

R.C.C. Spun pipe IS. N.P.-3 class pipe, should of the

standard design and also have corresponding

standard diameter as per length including spigot

and socket with rubberized, all taxes, insurance,

transportation, loading along with unloading and RMC

reaching the store or site and carrying out DRAINAGE

83 necessary inspections along with providing supply Rmt. 530.00 ₹ 139.00 ₹ 73,670.00 2023-24

work and required hemp, wata (from CM. 1:1) and It No.1396

also line level And complete including laying, Pg No.56

jointing, curing with required hemp in grades. for

pipe of NP - 3 class of 300 m.m. dia. only fixing work

Providing and constructing Sewer manholes,

scraper manholes and unit house connection

chamber, as per the type design in brick masonry in

C.M.1:5 and inside and outside 20mm thick

plastering in C.M.1:3 necessary 100mm coping with

reinforcement in R.C.C.M. 200 fixing C.I. steps and

fixing manhole frame and covers (But excluding

supply of manhole frame and covers)over manholes

and house connection chamber sand fixing Manhole

covers (but excluding supplying of manhole covers)

84 over scraper manhole etc. complete, providing and Each 10.00 ₹ 27,272.50 ₹

fixing safety chain wherever necessary as per the

stipulations in the type design complete as per

latest CPHEEO manual. (excl. excavation). Manhole

type "B" circular type having inside diameter of

minimum 1500 mm and for depth from 1.5 M to

M (for 150 mm to 600 mm dia sewers) Manhole

type "B" as above but upto 1.5 M depth.

Extra depth beyond 1.5 mt to 2.00 mt.

Precast R.C.C circular manhole cover supply RMC

complete with fixing 600 mm diameter with 10 tone DRAINAGE

Precast R.C.C circular manhole frame supply RMC

complete with fixing 600 mm diameter with 10 tone DRAINAGE

Precast R.C.C circular manhole cover supply RMC

complete with fixing 600 mm diameter with 20 tone DRAINAGE

Precast R.C.C circular manhole frame supply RMC

complete with fixing 600 mm diameter with 20 tone DRAINAGE

Providing and constructing rectangular brick

masonry chamber for house connection as per type

design in brick masonry in C. M. 1:3 including M-100

in foundation M-150 in benching inside plastering in

89 C. M. 1:3 and outside plastering in C. M. 1:3 coping Nos. 40.00 ₹ 7,922.00 ₹

in M200 and fixing RCC precast manhole frame and

covers, but Excl. supply of manhole and cover etc.

complete excl. excavation.

House Connection Chamber light duty Frame GWSSB

House Connection Chamber light duty Cover GWSSB

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers R&B 2024-25

92 not exceeding 20 cm. in depth consolidating each Cum. 143.00 ₹ 136.11 ₹ 19,463.73

disposited layer by ramming and watering. Pg No.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff with

all lead & lift.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff with

all lead & lift.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful R&B MORBI SOR

95 materials and disposing off the excavated stuff upto CuM 78.00 ₹ 169.00 ₹ 13,182.00 ITEM CODE-

50 Meter lead.(B) Dense or Hard soil 04002B

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful R&B MORBI SOR

96 materials and disposing off the excavated stuff upto CuM 78.00 ₹ 284.37 ₹ 22,180.86 ITEM CODE-

50 Meter lead.(C) Hard Murrum 04002C

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone R&B MORBI SOR

97 aggregates 40 mm nominal size) and curing CuM 32.00 ₹ 3,064.60 ₹ 98,067.20 ITEM CODE-

complete excluding cost of formwork in (A) 05003A

Foundation and Plinth

Providing bedding incl. ramming, watering,

levelling, consolidating etc. Complete as per

98 standard and instruction of engineer incharge As Cum. 24.00 ₹ 329.00 ₹

above with required quality Sand brought from

outside inclduing all lead

Supplying and fixing reinforced concrete heavy duty

non pressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2 R&B MORBI SOR

99 watering and laying (To level of slops of I.S. 458 / Rmt 350.00 ₹ 1,447.53 ₹ 506,635.50 ITEM CODE-

1971 Class NP3 casted by vertically vibrated

technology of following internal diameter. (ii)

Providing and constructing Sewer manholes,

scraper manholes and unit house connection

chamber, as per the type design in brick masonry in

C.M.1:5 and inside and outside 20mm thick

plastering in C.M.1:3 necessary 100mm coping with

reinforcement in R.C.C.M. 200 fixing C.I. steps and

fixing manhole frame and covers (But excluding

supply of manhole frame and covers)over manholes

and house connection chamber sand fixing Manhole

covers (but excluding supplying of manhole covers)

over scraper manhole etc. complete, providing and

100 fixing safety chain wherever necessary as per the Each 10.00 ₹ 27,272.50 ₹

stipulations in the type design complete as per

latest CPHEEO manual. (excl. excavation). Manhole

type "B" circular type having inside diameter of

minimum 1500 mm and for depth from 1.5 M to

M (for 150 mm to 600 mm dia sewers) Manhole

type "B" as above but upto 1.5 M depth.

Extra depth beyond 1.5 mt to 2.00 mt.

(Up to 1.5 mt = 21116 + extra depth 0.5 mt

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers R&B 2024-25

101 not exceeding 20 cm. in depth consolidating each Cum 696.00 ₹ 135.56 ₹ 94,349.76

disposited layer by ramming and watering. Pg No.

Providing and supplying in standard length ISI mark

rigid unplasticised PVC pipes suitable for potable

water with ring fit joint including cost of rings, as

per IS specification no. 4985/1988 including all local

and central taxes, transportation, freight charges,

102 octroi, inspectioncharges, loading, unloading, Rmt 500.00 ₹ 575.00 ₹

conveyance to the departmental stores and

including cost of jointing meterial etc. complete.

Test Pressure 6 Kg/cm2 160mm dia

Lowering, laying, fixing and jointing PVC/uPVC/cPVC

pipes and specials of following class and diameter

including cost of conveyance from stores to site of GWSSB

works including cost of labour,material, cement 2022-23

solvent,giving satisfactory hydraulic testing as per It No.11.b.13

ISI code. Pg No.37

Test Pressure 6 Kg/cm2 160mm dia

Providing and supplying at store or site of work incl.

freight, loading, unloading, stacking, insaurance &

all taxes etc. complete

P. V. C. Couplers 6 Kg/cm2 (Fabricated) 160mm GWSSB

P. V. C. Tail Piece with P. V. C. Flange (ISI) Heavy GWSSB

duty (Moulded) 160mm 2022-23

Service Saddle 25 mm (Moulded) heavy 160mm GWSSB

P. V. C. Tee (Moulded) 160 x 110 mm GWSSB

P. V. C. Tee (Moulded) 160 x 160 mm GWSSB

P. V. C. Elbow (Moulded) 160mm GWSSB

P. V. C. Reducer (Moulded) 200 x 160 mm GWSSB

P. V. C. Reducer (Moulded) 160 x 140 mm GWSSB

P. V. C. Reducer (Moulded) 160 x 110 mm GWSSB

P. V. C. Reducer (Moulded) 160 x 90 mm GWSSB

RCC precast M.H.Frame & Cover Manufacture,

supply & Delivery at store or at site of work precast

RCC M.200 Frame & cover suitable to drainage M.H.

and as per type design & Drawing including cost of

reinforcement M.S. Angles or Flat, curing mold work

Heavy Duty Frame suitable for 50cm opening of MH GWSSB

Heavy Duty Cover suitable for 50cm opening of MH GWSSB

House Connection Chamber light duty Frame GWSSB

House Connection Chamber light duty Cover GWSSB

Providing and constructing rectangular brick

masonry chamber for house connection as per type

design in brick masonry in C. M. 1:3 including M-

100 in foundation M-150 in benching inside

118 plastering in C. M. 1:3 and outside plastering in C. Nos. 40.00 ₹ 7,922.00 ₹

M. 1:3 coping in M200 and fixing RCC precast

manhole frame and covers, but Excl. supply of

manhole and cover etc. complete excl. excavation.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

All lead and Lift .(C) Hard Murrum

Providing and supplying D. I. K-9 grade pipes for

following nominal bore diameter with internal

cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to GWSSB

departmental stores, stacking etc. complete. (IS 2022-23

8329-2000). Rate for DI pipe based on Wholesale It No.2.1.A.2

Price index of Pig Iron as 157.60 for the month of Pg No.

Dec-2022. For sewerage project cement mortor

lining shall be with sulphate resistance cement DI

PIPE K-9 2) 200 mm

4) 400 mm GWSSB

Providing and making flanged joints to flanged DI/

C.I. pipes of all classes / specials etc. including cost GWSSB

of all jointing materials rubber packing, nut bolts 2022-23

including lowering laying jointing labour hydraulic It No.5.5

testing etc. complete 9) 400 mm dia Pg No.35

lowering, Laying and Jointing C.I. S&S Spun pipes

suitable for Tyton joints / Mortar lined D.I. pipes of

various classes with CI/ MS specials of follwing

123 diameters in proper position, grade and alignment Rmt 450.00 ₹ 225.00 ₹

as directed by Engineer-in-charge including

hydraulic testing etc. complete 9) 400 mm

Manufacture, Supply and Delivery of Ductile iron

flange socket spigot bends, tees, reducers or any

other specials as per BS-EN-545/1995 class-A series

k12 suitable for use with D.I. pipes manufactured as

per IS: 8329/1994 delivery of specials is to be made GWSSB

to GWSSB store or site of works anywhere in 2022-23

Gujarat including all Taxes, loading, unloading, It No.8.2.A.1

carting, stacking, insurance, inspection charges, Pg No.11

octroi etc, complete with external bitumen & zinc

coating & internal cement mortar lining Socket &

Spigot type 80 to 300 mm dia

350 & above GWSSB

Flanged ended 80 to 300 mm dia GWSSB

350 & above GWSSB

M.S. Specials plain & socket ends upto 300 mm dia GWSSB

Above 300 mm dia GWSSB

M.S. Specials flanged ends upto 300 mm dia GWSSB

Above 300 mm dia GWSSB

Providing and supplying ISI mark CI D/F Sluice Valves

as per IS:14846 (Latest Edition) of following class

and diameter including all taxes, insurance,

transportation, freight charges,octroi, inspection

132 charges, loading,unloading, conveyance to Nos. 10.00 ₹ 10,295.00 ₹

departmental stores, stacking etc. complete.

PN-1.6 With hand wheel /cap operated (PD type

short body) 200mm Dia

PN-1.6 With hand wheel /cap operated (PD type GWSSB

short body) 100 mm Dia 2022-23

Providing and supplying ISI mark CI D/F Butterfly

Valves as per IS:13095 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges,octroi, inspection

134 charges, loading,unloading, conveyance to Nos. 3.00 ₹ 6,116.00 ₹

departmental stores, stacking etc. complete.

Butterfly valves IS 13095 with ISI mark PN

Providing and supplying ISI mark CI D/F Reflux

Valves as per IS:5312 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection

135 charges, loading, unloading, conveyance to Nos. 3.00 ₹ 16,571.00 ₹

departmental stores, stacking etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark 200mm

Providing and supplying C. I. Air valves of approved

make & quality of following class and diameter

including all taxes, insurance, transportation, freight GWSSB

charges, octroi, inspection charges, loading, 2022-23

unloading, conveyance to departmental stores, It No.16.1.C.6

stacking etc. complete. Air valves double acting Pg No.25

(DS2) 200mm Dia.

Providing and constructing rectangular brick

masonry chamber for house connection as per type

design in brick masonry in C. M. 1:3 including M-

100 in foundation M-150 in benching inside

137 plastering in C. M. 1:3 and outside plastering in C. Nos. 40.00 ₹ 7,922.00 ₹

M. 1:3 coping in M200 and fixing RCC precast

manhole frame and covers, but Excl. supply of

manhole and cover etc. complete excl. excavation.

Construction of valves chambers in brick or bela

stone masonary, locally available in C.M. 1:6

foundation concrete 150 mm thick in C.C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside

cement plaster in C.M. 1:3 and cement pointing

outside in C.M. 1:3 and top cover of precast RCC

slab 100 mm thick (With keyhole in two parts, each GWSSB

with handles or MS Bar etc. complete as given size) 2022-23

upto 1 Mt. depth from G.L. to pipe invert level incl. It No.2.D.1.a)

complete civil work but excl. cost of excavation and Pg No.101

refilling, with cast in situ RCC slab in one single piece

with fixing of CI-MH Frame and cover (excl. cost of

CI-MH Farme and cover) with 23 mm thick brick

masonary wall in C.M. 1:6 (a) Size of 1.30 m x1.30 m

Lowering, Laying and Jointing in position following

C.I. D/F Reflux valves, Butterfly valves, sluice valves

and Air valves including cost of all labour, jointing

139 material, including nut bolts and giving satisfactory Nos. 10.00 ₹ 439.00 ₹

hydraulic testing, etc. complete. (15.a) Sluice

valves, Butterfly valves, Reflux valves 100 mm Dia.

(15.a) Sluice valves, Butterfly valves, Reflux valves GWSSB

Air Valves double ball Flanged 200mm Dia GWSSB

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers R&B 2024-25

142 not exceeding 20 cm. in depth consolidating each Cum 291.00 ₹ 135.56 ₹ 39,447.96

disposited layer by ramming and watering. Pg No.

TREES & PLANTATION

Excavation of Foundation in Hard Murrum from 0.0 RMC

mtr. to 1.50 mtr depth including dewatering with BANDHKAM

143 lifting and laying in RMC limit as instructed Cum. 150.00 ₹ 141.00 ₹ 21,150.00 2023-24

Excavation of pits of size 0.60 m × 0.60 m × 0.60 m

144 for plantation work. Each 30.00 ₹ 109.00 ₹

Excavation of pits of size 0.45 m × 0.45 m × 0.45 m

145 for plantation work. Each 30.00 ₹ 67.00 ₹

Supply of sediment soil for garden(with laying work) GARDEN SOR

Supply & laying of Desi shade fertilizer GARDEN SOR

148 Supply & laying of NPK Fertilizer SqM 300.00 ₹ 10.00 ₹ 3,000.00 MR

149 Supply & Laying of Vermicompost fertilizer Kg 200.00 ₹ 25.00 ₹ 5,000.00 MR

Providing, supplying and spreading cocopeat

material of approved quality for mulching in

planting beds, shrub areas, tree basins and

landscaped zones, including transportation to site,

150 loading and unloading, labour for spreading and Kg 200.00 ₹ 30.00 ₹ 6,000.00 MR

uniform application to required thickness, proper

leveling and finishing, complete in all respects as

directed by Engineer-in-Charge.

Providing and laying Cynodon dactylon (Bermuda

Grass – Selection 1) lawn by turfing/sprigging

method using healthy, well-grown and weed-free

grass, including minor surface levelling and dressing,

removal of debris and unwanted material,

preparation of surface to proper slope and camber,

laying of grass uniformly, watering immediately

after laying, rolling to ensure proper root contact

with soil, and maintaining the lawn including regular

watering, mowing, weeding and care for a period of

2 months to ensure proper establishment, complete

in all respects as directed by Engineer-in-Charge

Supplying, planting and maintaining Malpighia

coxigera plants of 1.5 to 2.0 feet height, grown in

10" × 10" polybags, healthy, well-rooted and

disease-free, including placement in prepared

planting pits/areas provided by others, proper

152 positioning, application of recommended fertilizer, SqM 30.00 ₹ 1,485.00 ₹ 44,550.00 MR

fungicide and insecticide treatment at the time of

planting, watering, initial pruning if required,

complete in all respects as directed by Engineer-in-

Supplying, planting and maintaining Spider Lily

plants of 0.5 to 1.0 feet height, grown in 6" × 8"

polybags, healthy, well-rooted and disease-free,

including placement in prepared planting beds/pits

provided by others, proper alignment and spacing,

153 application of recommended fertilizer, fungicide SqM 30.00 ₹ 711.00 ₹ 21,330.00 MR

and insecticide treatment at the time of planting,

watering, initial cleaning and pruning if required,

complete in all respects as directed by Engineer-in-

Supplying, planting and maintaining Snow Bush

(Breynia disticha) plants of 1.5 to 2.0 feet height,

grown in 10" × 10" polybags, healthy, well-rooted

and disease-free, including placement in prepared

planting beds/pits provided by others, proper

alignment and spacing as per approved layout,

application of recommended fertilizer, fungicide

and insecticide treatment at the time of planting,

watering, initial pruning and shaping if required,

complete in all respects as directed by Engineer-in-

Supplying, planting and maintaining Traveller Palm

(Ravenala madagascariensis) grown in 21" × 21"

polybags, healthy, well-established, disease-free

and of approved nursery quality, including

placement in prepared planting pits provided by

others, proper positioning, alignment and

verticality, application of recommended fertilizer,

fungicide and insecticide treatment at the time of

planting, watering, initial cleaning of dried foliage if

required, staking and support where necessary,

replacement of dead plants during maintenance

period, complete in all respects as directed by

Engineer-in-Charge

Supplying, planting and maintaining Bismarckia Palm

(Bismarckia nobilis) grown in 21" × 21" polybags,

healthy, well-established, true to type, and disease-

free, of approved nursery quality, including

placement in prepared planting pits provided by

others, proper positioning and alignment ensuring

verticality, application of recommended fertilizer,

156 fungicide and insecticide treatment at the time of Each 10.00 ₹ 2,220.00 ₹ 22,200.00 MR

planting, watering, staking and necessary support

where required, removal of dry or damaged fronds

if required, replacement of dead plants during

maintenance period, complete in all respects as

directed by Engineer-in-Charge.

Supplying, planting and maintaining Mayurpankh

plants (Thuja / Platycladus orientalis or approved

equivalent species) grown in 21" × 21" polybags,

healthy, well-established, uniform in growth, and

disease-free, of approved nursery quality, including

placement in prepared planting pits provided by

others, proper positioning and alignment ensuring

verticality, application of recommended fertilizer,

fungicide and insecticide treatment at the time of

planting, watering, staking and necessary support

where required, initial trimming if required,

replacement of dead plants during maintenance

period, complete in all respects as directed by

Engineer-in-Charge.

Supplying, planting and maintaining Champa tree

(Plumeria species / Michelia champaca or approved

equivalent species) grown in 25" × 25" polybags,

healthy, well-established, true to type, and disease-

free, of approved nursery quality, including

placement in prepared planting pits provided by

others, proper positioning and alignment ensuring

verticality, application of recommended fertilizer,

fungicide and insecticide treatment at the time of

planting, watering, staking and necessary support

where required, removal of damaged or dry

branches if required, replacement of dead plants

during maintenance period, complete in all respects

as directed by Engineer-in-Charge.

Supplying, planting and maintaining Cerbera Red

(Cerbera odollam – red flowering variety) grown in

21" × 21" polybags, healthy, well-established, true

to type and disease-free, of approved nursery

quality, including placement in prepared planting

pits provided by others, proper positioning and

alignment ensuring verticality, application of

recommended fertilizer, fungicide and insecticide

treatment at the time of planting, watering, staking

and necessary support where required, initial

pruning if required, replacement of dead plants

during maintenance period, complete in all respects

as directed by Engineer-in-Charge

Supplying, planting and maintaining

Tabernaemontana divaricata (Tagar) plants grown in

10" × 10" polybags, healthy, well-rooted, uniform in

growth and disease-free, of approved nursery

quality, including placement in prepared planting

beds/pits provided by others, proper alignment and

spacing as per approved layout, application of

recommended fertilizer, fungicide and insecticide

treatment at the time of planting, watering, initial

pruning and shaping if required, complete in all

respects as directed by Engineer-in-Charge.

Supplying, planting and maintaining Mahendi

(Clerodendron inerme) plants of minimum 1.0 foot

height, grown in 6" × 8" polybags, healthy, well-

rooted, uniform in growth and disease-free, of

approved nursery quality, including placement in

prepared planting beds/pits provided by others,

161 proper alignment and spacing as per approved SqM 75.00 ₹ 517.00 ₹ 38,775.00 MR

layout, application of recommended fertilizer,

fungicide and insecticide treatment at the time of

planting, watering, initial trimming and shaping if

required,complete in all respects as directed by

Engineer-in-Charge.

ELECTRICAL WORK

Providing, supplying, transporting,erecting, testing

and commissioning 5.0 metre high decorative LED

pole light complete in all respects, made from GI

tubular pole (114mm OD bottom section–2.0m &

76mm OD top section–3.0 m ) with PP powder

coated finish, fitted with aluminium post-top LED

luminaire of 500 mm diameter,equipped with

Watt LED module using high-efficiency LED chips

and electronic driver, including base plate

200×200×8mmthick, 600 mm long 12mm dia J type

foundation bolts with nuts & washers, internal

wiring with MCB and connector strip, complete

installation, alignment, electrical connections,

testing and commissioning at site, including all

materials, labour, tools, tacklesand incidentals,as

directed by Engineer-in-Charge.

Providing & erecting approved make street light /

wall mounting junction box compression moulded

from SMC (thermoset plastic) vertical sliding cover

having locking with square head stud loop in / loop

163 out in built terminal suitable for four core cable, Nos. 15.00 ₹ 610.00 ₹ 9,150.00 6-4-5

waterproof of I.P. 54 protected with clamp or bolt

nut & earth bolt of following size.(B) 250mm x

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes.(4)

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

165 aluminium strips, rubber grommets, rib, bakelite Sqm. 2.00 ₹ 10,365.00 ₹ 20,730.00 3-16-1.

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams)

The panel shall be supplied with following approved

manufacturers with following size.(A) locally

providing panel board (i)Miniature

and erecting with 350 mm depth

circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

167 breaking capacity & confirms to IS :8828 in existing Ea. 15.00 ₹ 573.00 ₹ 8,595.00 3-10-4.

box having following capacity (a)32 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

168 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 662.00 ₹ 6,620.00 3-10-5.

box having following capacity (b)40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

169 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 730.00 ₹ 7,300.00 3-10-5.

box having following capacity (b)63 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking

170 capacity & confirms to IS : 8828 in existing box Ea. 15.00 ₹ 293.00 ₹ 4,395.00 3-10-3.

having following capacity (B) 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

172 MCBs.(The DBs should be used of same company of Ea. 5.00 ₹ 3,369.00 ₹ 16,845.00 3-11-5.

MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)(b) sheet steel double

door (iii)8 way

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

173 MCBs.(The DBs should be used of same company of Ea. 5.00 ₹ 3,836.00 ₹ 19,180.00 3-11-5.

MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)(b) sheet steel double

door (iv)12 way

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

174 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 2,611.00 ₹ 26,110.00 3-12-2.

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed(ii)

40Amps. FP Cat. III

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

175 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 3,010.00 ₹ 15,050.00 3-12-2.

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed(ii)

63Amps. FP Cat. III

Providing and erecting metallic vitrified danger

notice board as per language suggested by engineer

incharge for MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 50 KA and above at 415 V having

Normal current rating 200A. with variable Thermal

177 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹ 20,739.00 3-4-1.

50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to

each bar, erected in existing cubical panel with

necessary connections.(B) Suitable for 200 Amp.

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over

the run and back filling the same and making the

surface as normal ground.

Providing 1:2:4 cement concrete foundation &

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below ground

180 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 30.00 ₹ 801.00 ₹ 24,030.00 6-3-4.

cm) high upper ground level with necessary curing

and finishing in approved manner.( for 4 & 6 mtr

MAIN & SUBMAIN WIRES

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC

pipe and accessories

(c) 3 wire 1.5 sq. mm R&B ELECTRIC

(d) 3 wire 2.5 sq. mm R&B ELECTRIC

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

wiremedium class Rigid PVC pipe and

4 sq. mm R&B ELECTRIC

(e) 3 wire 6 sq. mm R&B ELECTRIC

(i) 4 wire 10 sq. mm R&B ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 2 core 10 Sq. mm RMC ELECTRIC

(B) 2 core 6 Sq. mm RMC ELECTRIC

(A) 2 core 4 Sq. mm RMC ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

(A) 3 core 2.5 Sq. mm R&B ELECTRIC

(B) 3 core 4 Sq. mm R&B ELECTRIC

(C) 3 core 6 Sq. mm R&B ELECTRIC

(D) 3 core 10 Sq. mm R&B ELECTRIC

(E) 3 core 16 Sq. mm R&B ELECTRIC

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm R&B ELECTRIC

(C) 4 core 10 Sq. mm R&B ELECTRIC

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

(A) 4 core 16 Sq. mm R&B ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(C) 4 core 6 Sq. mm R&B ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 10 Sq. mm R&B ELECTRIC

providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

mmof copper lugs, nuts and R&B ELECTRIC

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm R&B ELECTRIC

(B) 2 to 4 core 6 Sq. mm R&B ELECTRIC

(C) 2 to 4 core 10 Sq. mm R&B ELECTRIC

(D) 2 to 4 core 16 Sq. mm R&B ELECTRIC

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

(A) 1.5/ 2.5/4/6 Sq.mm R&B ELECTRIC

(C) 16/25 Sq.mm. R&B ELECTRIC

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

(C))90 mm outer dia

(D)120 mm outer dia.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) R&B SOR - 2025-

210 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 2.00 ₹ 10,489.00 ₹ 20,978.00

/ meter testing as per IEC 62561-2017, Voltage 3-14-10

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retainmoisture for

long time Necessary test report must be

submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (c) For

Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA) i.e independent Earthing in normal soil.

Providing and :erecting

fillingearthing

150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth

wire. - to be used for each Street Light

For using salt and charcoal / coke as required for

pipe type earthing.

Providing one bag of 25 Kg. Additional Back Filling

213 Compound (BFC) suitable for safe earthing device. Ea. 30.00 ₹ 700.00 ₹ 21,000.00 3-14-11.

Providing and erecting required size Copper strip for

earthing of H.T. OCB / ACB/ Transformer, LT panel

board, Motors etc. using copper clamp.

Providing, supplying, installing, testing and

commissioning 64-channel Network Video Recorder

(NVR) of (CP Plus / Hikvision / Dahua or approved

equivalent), supporting IP cameras up to 8 MP, with

minimum 8 SATA interfaces for HDD storage,

H.265+/H.265/H.264 video compression, dual

HDMI/VGA output, multiple network ports, alarm

input/output, USB ports, RAID support (where

215 applicable), ONVIF compliance, remote monitoring Nos. 1.00 ₹ 70,500.00 ₹ 70,500.00 MR

through web and mobile application, complete with

power adapter, rack mounting accessories,

configuration, integration with CCTV network and

all accessories, complete in all respects as per

specifications and directions of Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning 8 MP colour dome IP camera of CP

Plus / Hikvision / Dahua or approved equivalent with

built-in microphone, featuring minimum 8 MP

(3840×2160) resolution, 1/2.8” CMOS sensor, full-

colour low-light imaging (hybrid IR / warm-light

where applicable), H.265+/H.265/H.264

compression, ONVIF compliance, fixed lens 2.8 mm

216 / 4.0 mm as specified, minimum 30 m IR / white- Nos. 5.00 ₹ 13,200.00 ₹ 66,000.00 MR

light illumination, IP67 weatherproof and IK10

vandal-resistant housing, PoE (IEEE 802.3af) power,

including fasteners, alignment, configuration,

testing and commissioning, complete in all respects

as per specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning 8 MP colour bullet IP camera of CP

Plus / Hikvision / Dahua or approved equivalent with

built-in microphone, having 1/2.8” CMOS sensor,

minimum 8 MP (3840×2160) resolution, colour

imaging in low light (supplementary warm light

where applicable), H.265+/H.265/H.264

compression, ONVIF compliance, fixed lens (2.8 mm

217 / 4.0 mm as specified), minimum 30 m IR / white- Nos. 15.00 ₹ 13,200.00 ₹ 198,000.00 MR

light illumination, IP67 weatherproof housing, PoE

(IEEE 802.3af) support, integrated audio capture,

including all fasteners, alignment, configuration,

testing and commissioning, complete in all respects

as per specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning 8-port Gigabit PoE Ethernet switch

of CP Plus / Hikvision / TP-Link or approved

equivalent with SFP uplink, comprising 8 nos.

10/100/1000 Mbps RJ-45 PoE ports compliant with

IEEE 802.3af/at, with minimum 2 nos. SFP ports for

fibre uplink, total PoE power budget not less than

218 120 W, supporting VLAN, QoS, IGMP snooping, Nos. 2.00 ₹ 4,500.00 ₹ 9,000.00 MR

surge protection, fanless / low-noise operation

(where applicable), including power cord, mounting

accessories, patching, basic configuration, testing

and commissioning, complete in all respects as per

specifications and directions of Engineer-in-Charge

Supply, installing, testing and commissioning of

central management software for Viewing, multi-

NVR management, suppoerting all cameras at one

219 single screen and maximum devices management, Nos. 1.00 ₹ 15,000.00 ₹ 15,000.00 MR

auto search configuration and status monitoring as

per instruction by EIC/Consultant.

Providing, supplying, installing, testing and

commissioning 8 TB capacity surveillance-grade

hard disk drive of Seagate / Western Digital /

Toshiba or approved equivalent, specifically

designed for 24×7 continuous video recording,

compatible with Network Video Recorders (NVRs),

supporting SATA III interface, minimum 5400–7200

RPM, cache not less than 256 MB, optimized for

multi-camera environments, low power

consumption and high reliability, including mounting

in NVR, formatting, configuration, health check and

testing, complete in all respects as per directions of

Engineer-in-Charge

Providing, supplying, installing and commissioning

24U floor-mounted network/server rack, fabricated

from heavy-gauge CRCA steel, 19-inch standard,

with front toughened glass door, lockable

rear/perforated door, removable side panels,

adjustable mounting rails, cable entry provisions at

top and bottom, complete with 2 nos. cooling fans,

221 1 no. rack-mount Power Distribution Unit (PDU) Nos. 1.00 ₹ 20,000.00 ₹ 20,000.00 MR

with surge protection, earthing provision, hardware

accessories, leveling feet/casters, installation,

alignment and testing, complete in all respects as

per specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning PoE junction box for IP CCTV

camera, made of weatherproof polycarbonate /

powder-coated aluminium enclosure, suitable for

outdoor installation, including RJ45 CAT-6

termination, PoE pass-through / coupler, cable

glands, internal mounting plate, gasket sealing,

fixing on pole / wall / structure, proper cable

dressing, weatherproofing, testing and

commissioning, complete in all respects as per

specifications and directions of Engineer-in-Charge

Providing, supplying, installing and fixing junction

box of size 5" × 5", made of heavy-duty PVC /

polycarbonate / powder-coated metal as specified,

suitable for indoor / outdoor application, including

cover with gasket, cable entry knock-outs, terminal

223 connectors, screws, rawl plugs, fixing on wall / pole Nos. 20.00 ₹ 75.00 ₹ 1,500.00 MR

/ structure, proper alignment, sealing, testing and

making good, complete in all respects as per

directions of Engineer-in-Charge

Providing, supplying, installing, testing and

commissioning 40-inch LED television of LG /

Panasonic / Nextview or approved equivalent , with

Full HD resolution (1920×1080), minimum two

HDMI ports and one VGA port, USB interface, built-

in speakers, wide viewing angle, suitable for 24×7

display operation, including wall-mount bracket /

table stand (as specified), power cord, basic

configuration, connection testing and

commissioning, complete in all respects as per

specifications and directions of Engineer-in-Charge

Supplying & erecting approved make LAN cable of

225 following size in existing pipe as per direction Mtr. 900.00 ₹ 47.00 ₹