AMRUT Modifications to the Existing 5MLDCapacity STP at Elamkulam Essential additional measures at the 5MLDSTP at Elamkulam

Amount

Approach Road & Roof Covering to Co treatment Unit

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge.

OD166708/2025-2026:Supplying and engaging mason for the rehabilitation of the old existing room as per the direction of department officers

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

OD166712/2025-2026:Hire charges of Hydraulic Excavator for taking out the sludge accumulated in the Primary Settling tank which is to be converted as dilution tank and disposing the waste as per the direction of department officers within 50metre.

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD211243/2025-2026:Providing, supplying, and engaging labourers as and when required for carrying out unforeseen works, including all associated tasks such as loading, unloading, shifting of materials, site clearing, and any other miscellaneous activities as directed by the Engineer-in-Charge

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

16.78.2:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

OD219492/2025-2026:Providing andfixing a rectangular cubicle type strainer of size 180cmx60cm , fabricated from 8mm diameter SS 304 rods.. The strainer shall have wall height of 50cm on three sides and 25cm on the forth side to facilitayte easy discharge of filtered materials . It shall be provided with a suitably sized stainless steel handle for convenient handling and operation. The unit shall be robust,corrosion resistant, and suitable for seperating and retaining solid waste, debris,and other coarse materils from slurry water contained in septage discharged from lorries.Allwelding joints shall be neatly finished and the over all construction shall ensure high durability, structural stability and ease of cleaning

OD219498/2025-2026:Providing a high pressure washer equipped with a 1700w single phase electric motor capable of delivering a maximum pressure of 130 bar. The unit shall be fitted with a 3-in-1 nozzle offering rotary, fan jet and pencil jet spray modes for versatile cleaning applications. it shall include an integrated detergent system for efficient washing and a minimum 6m high- ptressure hose to ensure operation flexibility. the washer shall be compact and portable, with an approximate weight of 7.9Kg , and construct from durable, corrosion resistant materials suitable for out door and industril use. The equipment shall be supplied complete with standard gun, lnce and nozzle assembly as recomended by the manufacturer and shall be approved make and subject to the approval of the Engineer in charge.

OD219512/2025-2026:Supply, installation, testing, and commissioning of a Mini Mast Lighting System complete with an octagonal pole fabricated from hot-dip galvanized GI sheet, having a top diameter of approximately 700 mm and bottom diameter of 1300 mm, with base plate designed to withstand wind speed as per IS 875 (Part III). The mast shall include a round-arm luminary carriage suitable for mounting 4 Nos. of 150 W LED floodlights with die-cast aluminum housing, IP66 protection, IK07 impact resistance, and high-efficiency electronic driver with surge protection. The work shall include providing and constructing suitable RCC foundation with foundation bolts, necessary cabling from the control gear box to the luminaries, and proper earthing as per IS 3043. All materials, fittings, accessories, and labour required for installation, testing, and commissioning shall be included, complete in all respects as per specifications and directions of the Engineer-in-Charge

OD221357/2025-2026:Supply and planting of Ixtora plants as directed. The rate shall include the cost of plants, gardener charges, fertilizers,conveyance ,proper maintenance and all materials and labor required for proper completion of the work

OD221391/2025-2026:Supply and planting of Bougainvilla plants as directed. The rate shall include the cost of plants, gardener charges, fertilizers,conveyance ,proper maintenance and all materials and labor required for proper completion of the work

OD221722/2025-2026:Supply and planting of Melastoma plants as directed. The rate shall include the cost of plants, gardener charges, fertilizers, and all materials and labor required for proper completion of the work

OD221392/2025-2026:Supply and planting of Murraya small plants as directed. The rate shall include the cost of plants, gardener charges, fertilizers,conveyance and all materials and labor required for proper completion of the work

OD221393/2025-2026:Supply and planting of Murraya big plants as directed. The rate shall include the cost of plants, gardener charges, fertilizers,conveyance ,proper maintenance and all materials and labor required for proper completion of the work

OD221413/2025-2026:Supply and planting of Ixora miniature plant as directed. The rate shall include the cost of plants, gardener charges, fertilizers,conveyance, proper maintenance and all materials and labor required for proper completion of the work

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop

OD222673/2025-2026:Supplying, fabricating, and placing in position a plastic bottle collection booth of size 210 cm in length and 50 cm in diameter, constructed using MS solid rods and MS tubes, including surface preparation and painting with two coats of approved synthetic enamel paint over a suitable primer, complete with all materials, labour, fabrication, finishing, transportation, loading, unloading, and all incidental charges required for the proper completion of the work

OD226431/2025-2026:Supplying and providing RCC flower pots, including cost of all materials, manufacturing, curing, finishing, handling, transportation to site, and labour charges for proper installation and completion of the work, as directed by the departmental officers

Yard Lighting & Monitoring

OD166661/2025-2026:Supply ,installation, trial run and commissioning of CCTV cameras with 53" LED TV which includes 24 Nos 5MP IP camera,32 Channel Metal Body 4S,4TB Hard Disc ,8+2 Port POE, 4U Rack with PDU, necessary cat6 outdoor cable,OFc Converter,Cable and OFC cable jointer ,required 80mm GI posts with foundation etc.etc. including the cost of installation cabling work using CAT6premium cable etc. complete.

OD219542/2025-2026:Wiring for light pint/fanpoint/ exhaust fan point/ call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit with modular switch,modular plate,, Suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated cop[per conductor single cor cable etc. as requird. Group B

OD219538/2025-2026:Supply and fixing reputed make 100Watts LED Flood Light in GI Post and connect the same with light points etc. complete with all material and labour charge

OD219555/2025-2026:Supply and erection of reputed make 4feet LED tube light fitting with tube on ceiling/ wall and connect the same with light points, including all cost of materials anf labour charges ect. complete.

OD219561/2025-2026:Providing and engaging qualified electricians for carrying out unforeseen and contingent works at site, including maintenance tasks, electrical repairs, temporary connections, and other related activities, complete as directed by the Engineer-in-Charge.”

OD219564/2025-2026:Design, composition,Supply and installation of a name board of size 10feetx4 feet size , GI pipes painted with epoxy for legs and frames, 10mm. Acrylic Laser cut lettter Pasting on 4mm ACP sheet box, Acrylic laser cut letters Polyurithene coating( PU coated or vinyl pasted) in colur specified with intyernally litLED , sign to be fixed as per the direction of department officers

SHAJU T S (BID ID -2446192)

M B VENUGOPALAN (BID ID -2446652)

Bidder Name

M B VENUGOPALAN

SHAJU T S

M J Thomas