C/O C/O Balance work of existing M.C building at SCO Complex Depot Bazar Dharamshala Distt. Kangra HP

Amount

Providing and laying cement concrete 1:8:16 (1cement: 8sand:16graded stone aggregate 20mm. nominal size) and curing complete on slab and floor excluding the cost of form work. screed laid under flooring as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as t give a fair finish including centring, shuuttering, shuttering and propping etc, with wooden battens and billies, height of propping and centring below supporting floor to ceiling upto all hight and removal of the same for insitu-reinforced concrete & plinth concrete work in Columns, pillars, posts and struts Square, rectangular or polygonal in plan as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. upto 200mm in thickness as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials. .

Beams, cantilever, girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. In depth in all hights from floor as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Edges of slabs and breaks in floors and walls under 20cm wide as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Column, pillars, posts and struts upto all floor level as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Lintels, beams girders bressumers and cantilevers upto all floor level as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing mild steel/Tor steel reinforcement for R.C.C. Work including bending, binding and placing in position complete including cost of binding wire upto all floor level as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

2nd class brick work using common burnt clay building bricks in super structure above plinth level up to all floor level in cement mortar 1: 6 (1 cement : 6 sand) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

2nd class half brick masonary in common brunt clay building bricks in super structure above plinth level up to all floor level in cement mortar 1: 4 (1 cement : 4 sand) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position.with 2nd class Deodar wood as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

P/F panelled glazed or panelled and glazed shutter for doors windows and clerestory windows i/c back enamelled iron butt hinges with necessary screws 40mm thick 2nd class Deodar wood as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd class deodar woodas per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing bright finished anodized aluminium sliding door-bolts anodized colour with nuts & screws etc complete 300x16mm as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and fixing bright finished anodized aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. 200x10mm as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and fixing bright finished anodized aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. complete. 100x10mm as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing anodized aluminium handles anodized transparent or dyed to required colour shade and with screws etc. complete. 125mm as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing anodized aluminium handles anodized transparent or dyed to required colour shade and with screws etc. complete. 100mm as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing hydrolic door closer with screws etc. Complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and fixing 100mm bright finished MS floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Provding and fixing M.S. hooks and eyes hooks and eyes 150mm as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

P/F partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately. Cement bonded particle board.6 mm thick as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

P/L white glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 ( 1 cement: 3 sand) and jointed with cement slurry as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and laying spartic ceremic tiles 5.5mm thick in flooring (300x300mm. size)treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement: 3sand)finished with flush pointing in white cement as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in the flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 ( 1 cement: 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 100mm dia pipes as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 100mm dia as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

PVC shoe 100mm dia as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm thick sheet as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Steel work welded in built up sections, trusses and framed work, i/c cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

In beams joists channels, angles, tee, flats with connecting plates or angle as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing wood primer pink as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Painting two coat ( excluding priming cost ) on new wood and wood based surfaces with enamel paint to give and even shade including cleaning the surface of all dirt, dust and other foregin matters, sand papering & stopping with enamel paint other than white

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Ready mixed primer as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with White paint as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Painting two coat ( excluding priming cost ) on new steel and other metal surfaces with enamel paint to give and even shade including cleaning the surface of all dirt, dust and other foregin matters with enamel paint other than white as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

6 mm Cement (6 milimeter thick plaster to ceilling in Cement morter 1:4 ( 1 cement: 4 Sand ) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

15mm (fifteen milimeter thick)Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level i/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finishing even and smooth Cement morter 1:6 (1 cement: 6 Sand ) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

15mm (fifteen milimeter thick) Cement plaster in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto floor two level i/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finishing even and smooth Cement morter 1:6 (1 cement: 6 Sand ) as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matter etc including sand paper smooth complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces ( two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Wall painting(Two coat)with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing 19mm thick water proof commercial board in shelves/ box for cupboard with butt joints and fixing with nails & screws etc. Complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing 12mm thick 100 mm wide pelmet with 20mm diametre steel curtain rod and brackets including fixing with 25x3mm MS flat 10 cm long and plugs etc. Complete as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

Providing and fixing M.S.Plain grills of required patterns in wooden frames of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials..

surinder

Rajesh Thakur