Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC OLD MISSAMARI PO GARUBANDHA PS MISSAMARI DISTT SONITPUR ASSAM 784506 | MISSAMARI | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹42.8 L+₹7.5 L (21.3%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹44.3 L+₹9.1 L (25.7%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹45.3 L+₹10.0 L (28.3%)Rejected-Finance LAKHPURA BUTCHERY MISSAMARI DIST SONITPUR ASSAM PIN 784506 | MISSAMARI | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹45.5 L+₹10.3 L (29.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/S RANA ENGINEERING ENTERPRISE L6 | Saraswati Auto Works L2 | bkgeneralstores L5 | Satya Enterprises L4 | shree kamakhya traders L3 | DHEERAJ CONSTRUCTION L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L Servicing to DG set of capacity 400 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at JALKENDRA
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) Air filter - 01 set
(v) Cleaning of fuel tank - 01 Job
(vi) Tapping adjustment and calibration- 01 job
(vii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 1 | Each Job | 20,000 ₹20,000 Lowest | 52,500 ₹52,500 | 51,500 ₹51,500 | 52,000 ₹52,000 | 47,750 ₹47,750 | 35,000 ₹35,000 |
| 2.00 | M & L for Servicing to DG set of capacity 320 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at UH-ALH, Sangrilla Hall, 41 R&O KLP, 11Para SF Central AC plant
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 4 | Each Job | 15,000 ₹60,000 Lowest | 42,500 ₹1,70,000 | 43,000 ₹1,72,000 | 44,000 ₹1,76,000 | 44,222 ₹1,76,888 | 32,000 ₹1,28,000 |
| 3.00 | M & L for Servicing to DG set of capacity 200 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at JALKENDRA-02 Nos, UAV GP-II PH & 6679 Maint Flt 41, R&O/LCH
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 6 | Each Job | 12,000 ₹72,000 Lowest | 38,600 ₹2,31,600 | 39,200 ₹2,35,200 | 40,500 ₹2,43,000 | 41,910 ₹2,51,460 | 30,000 ₹1,80,000 |
| 4.00 | M & L for Servicing to DG set of capacity 125 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at REKHAMARI PH & MRO HUB
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 2 | Each Job | 10,000 ₹20,000 Lowest | 31,200 ₹62,400 | 32,100 ₹64,200 | 32,500 ₹65,000 | 32,000 ₹64,000 | 28,000 ₹56,000 |
| 5.00 | M & L for Servicing to DG set of capacity 100 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 180 MH
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 1 | Each Job | 8,000 ₹8,000 Lowest | 29,400 ₹29,400 | 28,600 ₹28,600 | 27,950 ₹27,950 | 28,410 ₹28,410 | 26,000 ₹26,000 |
| 6.00 | M & L for Servicing to DG set of capacity 82.5 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at Shivaji Nagar St Light & UAV (CCR) troop & 571 ASC Bn
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 3 | Each Job | 8,000 ₹24,000 Lowest | 26,500 ₹79,500 | 25,800 ₹77,400 | 25,100 ₹75,300 | 24,820 ₹74,460 | 20,000 ₹60,000 |
| 7.00 | M & L for Servicing to DG set of capacity 62.5 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at Engr Regt (Stn HQ), Perimeter lights (Rekhamari, Nepali Basti), Buffle range, 667 MI room, SPS-A CHHATAGHAR
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 6 | Each Job | 8,000 ₹48,000 Lowest | 24,000 ₹1,44,000 | 24,600 ₹1,47,600 | 25,300 ₹1,51,800 | 25,300 ₹1,51,800 | 20,000 ₹1,20,000 |
| 8.00 | M & L for Servicing to DG set of capacity 40 KVA to 45KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 180 MH Oxygen plant, & Signal centre
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 2 | Each Job | 6,000 ₹12,000 Lowest | 18,400 ₹36,800 | 18,100 ₹36,200 | 18,000 ₹36,000 | 18,120 ₹36,240 | 20,000 ₹40,000 |
| 9.00 | M & L for Servicing to DG set of capacity 35 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at UAV Troop (06 Nos), STP Pratap Nagar
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 7 | Each Job | 6,000 ₹42,000 | 17,200 ₹1,20,400 | 1,325 ₹9,275 Lowest | 16,550 ₹1,15,850 | 18,300 ₹1,28,100 | 20,000 ₹1,40,000 |
| 10.00 | M & L for Servicing to DG set of capacity 30 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at STP SPS-E 571 & MES IB
(i) Fuel filter (Primary & Secondary) - 01 Set
(ii) Spin –on filter for lubricant - 01 No
(iii) Engine oil as per manufacture specifications
(iv) coolent as per manufacture specifications
(v) Air filter - 01 set
(vi) Cleaning of fuel tank - 01 Job
(vii) Tapping adjustment and calibration- 01 job
(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job | 2 | Each Job | 6,000 ₹12,000 Lowest | 16,500 ₹33,000 | 17,300 ₹34,600 | 16,000 ₹32,000 | 15,340 ₹30,680 | 20,000 ₹40,000 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
3 Sept 2025, 6:00 pmClosed
GE MISSAMARI
PO-Missamari Dist-Sonitpur Assam
REPAIR MAINT OF DG SETS AND EOT CRANES AND MISC ITEMS UNDER GE MISSAMARI
2025_MES_723528_1
8549/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE MISSAMARI
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE MISSAMARI
₹90,000
Yes
9 Oct 2025
30 Jul 2025
5 Sept 2025
30 Jul 2025
3 Sept 2025
20 Aug 2025
30 Jul 2025 - 12 Aug 2025
Amount
M&L Servicing to DG set of capacity 400 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at JALKENDRA (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) Air filter - 01 set (v) Cleaning of fuel tank - 01 Job (vi) Tapping adjustment and calibration- 01 job (vii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 320 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at UH-ALH, Sangrilla Hall, 41 R&O KLP, 11Para SF Central AC plant (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 200 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at JALKENDRA-02 Nos, UAV GP-II PH & 6679 Maint Flt 41, R&O/LCH (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 125 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at REKHAMARI PH & MRO HUB (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 100 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 180 MH (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 82.5 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at Shivaji Nagar St Light & UAV (CCR) troop & 571 ASC Bn (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 62.5 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at Engr Regt (Stn HQ), Perimeter lights (Rekhamari, Nepali Basti), Buffle range, 667 MI room, SPS-A CHHATAGHAR (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 40 KVA to 45KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 180 MH Oxygen plant, & Signal centre (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 35 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at UAV Troop (06 Nos), STP Pratap Nagar (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 30 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at STP SPS-E 571 & MES IB (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 25 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at CCR Sub Stn (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M & L for Servicing to DG set of capacity 15 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 11 Para SF 02 Nos (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job
M&L Battery leads complete with terminal and lugs (set of three Nos) including removal of existing unserviceable one complete all as directed.
M&L Battery leads complete with terminal and lugs (set of two Nos) including removal of existing unserviceable one complete all as directed.
M&L Fan Belt complete suitable for DG set of capacity 100 to 500 KVA including removal of existing unserviceable one compete all as specified and directed.
M&L Fan Belt complete suitable for DG set of capacity 82.5 to 7.5 KVA including removal of existing unserviceable one compete all as specified and directed.
M&L Radiator Fan Blade complete suitable for capacity 7.5 to 82.5 KVA including removal of existing unserviceable one compete all as specified and directed.
M&L Radiator Fan Blade complete suitable for capacity 100 to 500 KVA including removal of existing unserviceable one compete all as specified and directed.
M&L disconnecting all electrical connections from DG set alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and testing & commissioning complete all as specified & directed.
M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 7.50 KVA to 15.00 KVA DG complete all as specified and directed.
M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 20 KVA to 40 KVA DG complete all as specified and directed.
M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 62.5 KVA to 82.5 KVA DG complete all as specified and directed.
M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 100 KVA to 125 KVA DG complete all as specified and directed.
M&L Self Starter assembly 24 Volts complete suitable for 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Self Starter assembly 12 Volts complete suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L DC Alternator assembly 24 Volts complete suitable for 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L DC Alternator assembly 12 Volts complete suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Electronic speed control unit assembly suitable for 24Volts battery charger including removal of existing unserviceable one compete all as specified and directed.
M&L SMPS (System main power supply) control unit assembly 24Volts complete suitable 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L SMPS (System main power supply) control unit assembly 12Volts complete suitable 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L AVR (Automatic Voltage regulator) control unit assembly suitable 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L AVR (Automatic Voltage regulator) control unit assembly suitable 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Brass battery terminals extended type heavy grade including removal of existing unserviceable one compete all as specified and directed.
M&L SS canopy Stainless steel hinges as per original OEM for acoustic doors with suitable Stainless steel bolts and nuts of DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Radiator hose pipe with suitable clamps of DG set including removal of existing unserviceable one compete all as specified and directed.
M&L solenoid switch assembly 24 volts suitable for 100 KVA to 400 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L solenoid switch assembly 12 volts suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Anti vibration pads with suitable bolts and washers including removal of existing unserviceable one compete all as specified and directed.
M&L Asbestos Rope including removal of existing unserviceable one compete all as specified and directed.
M&L Water pump Assembly suitable for 7.5 KVA to 63 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Water pump Assembly suitable for 82.5 KVA to 125 KVA DG set removal of existing unserviceable one compete all as specified and directed.
M&L Water pump Assembly suitable for 200 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Feed pump suitable for 7.5 KVA to 63 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Feed pump suitable for 82.5 KVA to 125 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Electronic Type Starting Switch for 7.5 KVA to 15 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L Electronic Type Starting Switch for 30 KVA to 125 KVA DG set including removal of existing unserviceable one compete all as specified and directed.
M&L taking out unserviceable radiator from existing DG set of capacity 200 KVA to 400 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.
M&L taking out unserviceable radiator from existing DG set of capacity 62.5 KVA to 125 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.
M&L taking out unserviceable radiator from existing DG set of capacity 7.5 KVA to 45 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.
S&F battery low maintenance heavy duty lead acid of capacity 12 volts 150 AH suitable for DG sets including removal of existing unserviceable one compete all as specified and directed.
S&F battery low maintenance heavy duty lead acid of capacity 12 volts 180 AH suitable for DG sets including removal of existing unserviceable one compete all as specified and directed.
S&F battery low maintenance heavy duty lead acid of capacity 12 volts 200 AH suitable for DG sets including removal of existing unserviceable one compete all as specified and directed.
Supply, Fixing and erection of Mild steel canopy Cover for SHIVAJI NAGAR DG set ( 82.5 KVA) as per existing size and profile duly painted with two coats of synthetic enamel paint over red oxide primer compete all as specified and directed.
M&L Low oil pressure switch (LLOP) as per Existing OEM Suitable for upto 200 KVA DG sets capacity compete all as specified and directed.
M&L microprossesor based fully configurated as per Existing OEM controller display panel board Suitable for upto 125 KVA DG sets capacity compete all as specified
M&L Onload change over switch of capacity 63 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed.
M&L Onload change over switch of capacity 100 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed.
M&L Onload change over switch of capacity 400 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed.
M&L Onload change over switch of capacity 630 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed.
Scraping old paint of any capacity DG set Chessis (Approx coverage area 5-7 Sqm) installed at various locations and Painting with one coats of red oxide paint and two coat of synthetic enamel paint of shade compete all as directed.
M&L taking out all injector (by using right tools means torque wrench ) from DG set 200 KVA to 500 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.
M&L taking out all injector (by using right tools means torque wrench ) from DG set 62.5 KVA to 125 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.
M&L taking out all injector (by using right tools means torque wrench ) from DG set 7.5 KVA to 45 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.
M&L fuel pipe ( benjo pipe) having length 1 feet to 3 feet of suitable size as per OEM including removal of existing unserviceable one compete all as directed.
M&L Hose pipe of suitable size and length as per OEM for 62.5 KVA to 500 KVA including removal of existing unserviceable one compete all as directed.
M&L power contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 7.5 KVA to 45 KVA including removal of existing unserviceable one compete all as directed.
M&L power contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 62.5 KVA to 125 KVA including removal of existing unserviceable one compete all as directed.
M&L power contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 200 KVA to 500 KVA including removal of existing unserviceable one compete all as directed.
Supply only Coolent suitable as per OEM suitable for DG sets compete all as directed.
Supply only Engine OIL suitable as per OEM suitable for DG sets compete all as directed.
M & L for periodic inspection/ servicing/ overhaulling of 10 Ton capacity flame proof EOT crane of any make installed at TP of 4 core OMC, making the cranes in serviceable condition complete all as specified and directed for maintenance specified as under:- (A) LONG TRAVERSE MOTION :- (i) Checking gear box oil level, checking and rectification of leakage if any and filling with new oil up to required level. (ii) Checking functioning of all brakes of any capacity and making adjustment for proper working. (iii) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (iv) Checking of grease in geared coupling and tighting of nut/bolts etc. (v) Checking of motion cut off at extreme ends with limit switches. (vi) Checking drive shaft and coupling including tighting of nut and bolts. (vii) Checking oil in FLP thrustors checking any leakage any filling with new oil. (viii) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION:- (i) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (ii) Checking functioning of all brakes of any capacity and making adjustment for proper working. (iii) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (iv) Checking of grease in geared coupling and tighting of nut/bolts etc. (v) Checking of motion cut off at extreme ends with limit switches. (vi) Checking drive shaft and coupling including tighting of nut and bolts. (vii) Checking oil in FLP thrustors checking any leakage any filling with new oil. (viii) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (C) HOIST MOTION (Item Contd.....)
(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all HT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (D) ELECTRICALS :- (a) Checking and tightening all electric connection (b) Checking the contactors/ relays etc for overheating or flashing. (c) Cleaning off all connection and control cables. (d) Properly bunching the loose control cable. (e) Checking functioning of cable carriers. (f) Checking the connection and serviceability of VVVF drives for smooth (E) GROUND MOTION CONTROL PANEL :- Opening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in unit quoted rate. . 2. Complete Greasing of each parts of crane for proper functining to EOT crane shall be included in unit quoted rate. 3. Spare parts hall be measured and paid separately.
All as per item No. 71 here-in-before but 5 ton capacity flame proof EOT crane installed at TP of 4 Corps OMC complete all as specified and directed.
All as per item No. 71 here-in-before but 5 ton capacity EOT crane installed at 4 Core zonal workshop, 671 EME & 11 PARA complete all as specified and directed.
All as per item No. 71 here-in-before but 3 ton capacity EOT crane installed at 41 R&O (LCH) complete all as specified and directed.
Supply, fixing and making all connections for limit switch 40 Amps 415 Volts all as per existing for LT/CT/ hoist motion of 10/5/3 ton capacity crane including taking down unserviceable complete all as specified and directed.
Supply only gear oil grade 680 suitable for hydraulic thruster brake complete all as directed.
Supply and fixing brake liner set suitable for 100 mm dia drum for LT/CT motion of 10/5/3 ton capacity FLP crane inluding taking down unserviceable complete all as specified and directed.
Supply and fixing brake liner set suitable for 160 mm dia drum for LT/CT motion of 10/5/3 ton capacity FLP crane inluding taking down unserviceable complete all as specified and directed.
Supply and fixing torque springs suitable for 6 kg capacity 100 mm dia drum brakes of LT/CT motion, including taking out the old unserviceable complete all as specified and directed .
Supply and fixing torque springs suitable for 9 kg capacity 160 mm dia drum brakes of LT/CT motion, including taking out the old unserviceable complete all as specified and directed .
S&F Contactor 20 Amps with 2 NO + 2NC including taking out old unserviceable complete all as directed.
S&F Contactor 25 Amps with 2 NO + 2NC including taking out old unserviceable complete all as directed.
S&F Contactor 32 Amps with 2 NO + 2NC including taking out old unserviceable complete all as directed.
M&L push button with element in push button box as per require colour code, including taking out old unserviceable one complete all as specified and directed.
M&L brake shoe with disc of crane of capacity 10/5/3 ton as per existing one, including taking out old unserviceable one complete all as specified and directed.
M&L Indicating Lamp as per required colour code, including taking out old unserviceable one complete all as specified and directed.
M&L Hoist Rope Drum Bearing as per existing type and capacity including taking out old unserviceable one complete all as specified and directed.
M&L LT/CT motor Bearing as per existing type and capacity including taking out old unserviceable one complete all as specified and directed.
M&L Fuses (HRC) upto 40 Amps for EOT cranes as per existing type and capacity including taking out old unserviceable one complete all as specified and directed.
M&L carrying out load test of 15 Ton EOT Crane with 110% of full load capacity of crane on hoisting long travel and cross travel for checking the performance including loading, unloading and returning the test loads obtained from the concerned unit/firm and submission of test certificate complete all as directed. Note:- Unit rate quoted is deemed to be inclusive cost for arranging the load and load testing of eache contract h crane as recommended by the manufacturer at 110% of its capacity from authorised by sate/central Govt agencies and testing to be carried out once during the contract period.
M&L carrying out load test of 10 Ton EOT Crane with 110% of full load capacity of crane on hoisting long travel and cross travel for checking the performance including loading, unloading and returning the test loads obtained from the concerned unit/firm and submission of test certificate complete all as directed. Note:- Unit rate quoted is deemed to be inclusive cost for arranging the load and load testing of eache contract h crane as recommended by the manufacturer at 110% of its capacity from authorised by sate/central Govt agencies and testing to be carried out once during the contract period.
M&L carrying out load test of 05 Ton EOT Crane with 110% of full load capacity of crane on hoisting long travel and cross travel for checking the performance including loading, unloading and returning the test loads obtained from the concerned unit/firm and submission of test certificate complete all as directed. Note:- Unit rate quoted is deemed to be inclusive cost for arranging the load and load testing of eache contract h crane as recommended by the manufacturer at 110% of its capacity from authorised by sate/central Govt agencies and testing to be carried out once during the contract period.
M&L carrying out load test of 03 Ton EOT Crane with 110% of full load capacity of crane on hoisting long travel and cross travel for checking the performance including loading, unloading and returning the test loads obtained from the concerned unit/firm and submission of test certificate complete all as directed. Note:- Unit rate quoted is deemed to be inclusive cost for arranging the load and load testing of eache contract h crane as recommended by the manufacturer at 110% of its capacity from authorised by sate/central Govt agencies and testing to be carried out once during the contract period.
Saraswati Auto Works (BID ID -3406486)
shree kamakhya traders (BID ID -3415235)
Satya Enterprises (BID ID -3413517)
bkgeneralstores (BID ID -3407715)
M/S RANA ENGINEERING ENTERPRISE (BID ID -3404519)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .