Design, Engineering, Supply, Installation, Testing and commissioning of Non Clog End Suction Type Horizontal Centrifugal Pump Set for effluent with accessories and allied Electro-Mechanical and Instrumentation and SCADA work at Dahej PCPIR Pumping Station at Dahej - II. (Suva Village).

NAME OF WORK: Design, Engineering, Supply, Installation, Testing and commissioning of

"Non Clog End Suction Type Horizontal Centrifugal Pump Set for effluent"

with accessories and allied Electro-Mechanical and Instrumentation and

SCADA work at Dahej PCPIR Pumping Station at Dahej - II. (Suva Village).

TENDER NOTICE NO.04 OF 2026-2027 SR.NO.06

VOLUME -III: PRICE BID

ONLINE TENDER PAPERS

1 Estimated cost (Excluding GST) : Rs.4,95,10,474.00

2 Tender fee Incl. GST : Rs.7,080.00

4 Last date on (or before) which the tender along-with DD : From 13th July 2026 to 03rd

/ FDR for Tender fees & EMD (by scanning) and other August 2026 upto 17.00 hours

required documents must upload on the web site of

www.tender.nprocure.com

5 Date on (or before) which DD/FDR in original for : From 4th August 2026 to 6th

Tender fee & EMD and other required documents must August 2026 upto 17.00 hours

reach in the office of the EXECUTIVE ENGINEER (M&E)

2nd FLOOR, NARMADA COMMERCIAL COMPLEX, ABOVE

CENTRAL BANK, M.G.ROAD, PANCH BATTI, GIDC,

02642 – 241902 ) E-Mail:- xenme-

[email protected]

6 Opening of Technical Bid In the Office of Superintending

Engineer (CG), GIDC, Bharuch, 2nd

floor, Narmada Commercial

Complex, PanchBatti, Bharuch as

under: - Preferably On dtd. 07th

August 2026 at 12:00 noon.

7 Eligible class of Registered : Bidder should be as per

Prequalification criteria for Work-

(2.1) Eligibility and Having similar

EXECUTIVE ENGINEER (M&E)

2nd FLOOR, NARMADA COMMERCIAL COMPLEX,

ABOVE CENTRAL BANK, M.G.ROAD, PANCH BATTI, GIDC, BHARUCH.

E-Mail:- [email protected]

Signature of Contractor Executive Engineer (M&E)

Name of Work: Design, Engineering, Supply, Installation, Testing and commissioning of "Non

Clog End Suction Type Horizontal Centrifugal Pump Set for effluent" with accessories and allied

Electro-Mechanical and Instrumentation and SCADA work at Dahej PCPIR Pumping Station at

Dahej - II. (Suva Village).

Sr. Description Qty Unit Rate(Rs) Amount(Rs)

1 Supply, installation, testing & 6 Set 6,41,502.51

commissioning of Non Clog End

Suction type Horizontal

Centrifugal Pump set for effluent

of required capacity & head with

suitable TEFC squirrel cage foot

mounted induction motor (with

minimum IE-3 efficiency class),

working on three phase 50 Hz ±

3%, 415 V ± 10% AC supply,

RPM synchronous speed along

with base frame, coupling with

guard, foundation bolts, strainer

etc. complete set as per relevant

IS & following M.O.C: Casing:

to 2% Ni. CI; Impeller & wearing

ring: SS-CF8M, Shaft with sleeve:

SS & Base frame: CI, Guide Pipe:

SS. Liquid: Industrial Effluent

Flow 455 m3/hr, Head = 77.0 m

Motor Rating = 170.0 KW,

Pump Efficiency Min. 66.0%,

Motor Effi. Min. = 96.0%,

Rated speed: . 1485 RPM

Operating voltage: 415 V 50 Hz

Starting method: DOL / SD / VFD

(or higher rating as per pump

manufacturer recommendation)

Selection of motor kw rating if

not available in this rating, next

higher rating will be consider

2 Design, Engineering, 6 Nos. 66,029.76

procurement, Installation, Testing

and commissioning of required

size double flanged Dual Plate

Check Valve (DPCV) - (PN 1.6) -

350 mm dia (At Pump Discharge)

Flanged Dual Plate Check Valve

(NRV) conforming to API 594 /

Signature of Contractor Executive Engineer (M&E)

598 PN 1.6 with Cast Steel body,

withSS 410 hinge ring and

wearing ring of CF8 all necessary

hardwares, complete as per data-

sheet & specification. Size :

mm dia( PN 1.6) flanges

machined faced and drilled to IS :

1538 / 1976 Part-IV/VI.

Hydraulic tests certificate &

certificate of material of

construction of parts shall be

submitted before despatch of

valves as per design with

required acessories, erection

hardware, necessary mounting

supports etc. complete. 350 mm

dia for various pumps.

3 Supply, installation, testing & 6 Nos 13,453.20

commissioning of flange ends

Expansion Bellow as per EJMA

standards of overall length of

minimum 300 mm, designed for

15 mm axial compression and

mm axial extension with tie rods

etc. of following MOC & pressure

ratings.MOC: Bellows: SA 240 Gr.

304; Internal Sleeve: SA 240 Gr.

304; Weldends: IS 2062 Gr. B;

Flanges: IS 2062 Gr. B (Drilling as

per IS 1538 / IS 6392 ) & Limit

Rods & Nuts: CS - IS 1367. PN

Rating 1.6, 350 mm Dia.

4 SITC of Cast Steel D/F Electric 6 Nos 4,39,350.00

Actuator operated Sluice Valve of

following size as per API-

600/598,Class 150 with Electric

Actuator with integral starter &

IP-68 enclosure, body, bonnet

and wedge of Cat Steel Gr. WCB

with Body & Seat ring of ASTM A

216 Gr CF8M, spindle of SS

flanges drilled to ANSI B 16.5 of

following diameter along with all

other necessary hot dipped

galvanised hardwares, bolts, nuts

& washers, gaskets including all

taxes, insurance, transportation,

freight charges, Inspection

Charges, loading unloading,

conveyance to pump house,

Signature of Contractor Executive Engineer (M&E)

stacking, security with required

plain cement concrete (PCC)

support for Valves etc. within

pump house for fixing valve etc.

complete as per Specification and

Size : Dia. 350 mm

5 Design, Engineering, 1 Nos 6,22,335.44

procurement, Installation, Testing

and commissioning of fixing in

position and jointing of 600 mm

dia cast steel temper proof

Kinetic Double Orifice Cast Steel

Tamper Proof non- temper Air

release valve PN1.6 type flanged

ends high performance CI air

valves with Isolating Sluice

valves for water combination

type (Air release valve non

temporing type) having double

ball, double orifice with stainless

steel ball, tamper proof air vents

rolling seal mechanism for air

release and anti vacuum

application designed for

kg/cm2 working pressure and

tested for 20 kg/cm2 pressure,

having flat faced flanges and

drilled to IS : 1538 / Part-IV /VI.

Hydraulic tests certificate &

certificate of material of

construction of parts shall be

submitted before despatch of

valves. (Rate to include cost of

gaskets, bolts, nut and any other

materials required for jointing

and its transportation etc.

including all taxes and duties.with

required acessories, erection

hardware, necessary mounting

supports etc. complete.

6 SS-316 PIPE & Fittings 120 Mtr 26,124.66

Supply, cutting, welding,

installation, connection with main

header, testing and

commissioning of SS 316 pipe

and Fittings and Specials like

deg. Bend, Drilled / Blind Flanges,

Reducer / enlarger, Tee, etc. for

suction/delivery and header lines

Signature of Contractor Executive Engineer (M&E)

conforming to ASME, SCH 10 with

connection/welded and with

required plain cement concrete

(PCC) support for Pipe lines and

specials, etc. in pump house with

material & labour for pipe

fixing/laying for

delivery/suction/header line etc.

as required complete as per

specification and IS. Dia 350 mm

7 Do but 600 mm dia. 20 Mtr 19,343.52

8 Supply, welding, installation, 48 Nos 16,648.84

testing and commissioning of SS

316 flanges of required sizes,

conforming to ANSI/IS, Class

with, off center bolt holes along

with all required hardware,etc. as

required and including cutting of

pipes & specials as required to

weld flanges as per specifications

Size : 350 mm dia- Drilled (or as

per actual pump delivery size)

9 Do as above 600 mm 4 Nos 16,648.84

10 SITC of suitable size of above 20000 Kg 58.58

pipes of flanged end type

fabricated DI/MS Specials like

tee, bend, duck foot bend, tapper,

distance pipe piece, blank flange,

dismentling joint, bolts, nuts,

washers, rubber packing etc.nut

bolts etc for delivery header,

rising main and suitable for above

pumps as per actual site

conditions & requirement qty. of

specials mentioned as per deisng

requirement with required

acessories, erection hardware,

necessary mounting supports etc.

complete upto 350 mm dia and

11 Do as above 600 mm 1000 Kg 58.58

12 Single Girder EOT Crane 1 Set 6,14,332.50

Supply, installation, testing &

commissioning single girder type

fully electrically operated EOT

crane with electrically operated

Signature of Contractor Executive Engineer (M&E)

hoist, class II duty, geared

travelling trolley with seven

meter lift complete with long

travel rail track (40 mm sq. bar),

moving or cross girder, all

three motions electrically

operated by suitable rating motor

IP 54, control panel & down

pendant control block, brake,

safety device, cables form motor

to starter panel & other required

accessories & tested as per IS

Specifications.

Capacity- 5 T, Span- 6-9 Mtr, Long

Travel- 12 Mtr, 6-10 Mtr

13 SITC Chain Pulley block of 3 ton 2 Nos 14,544.00

capacity, lift as per site condition

with gantry girder, erection

hardware, necessary mounting

supports etc complete.make as

14 Supplying & fixing Steel 150 Sq. 5,780.23

Chequered Plate having 12 mm Mtr

thickness, duly painted with two

coats of black Japan colour.

(Average Wt 200.3 kg / Sq.Mtr)

15 DEWATERING PUMP 2 Nos 1,47,811.48

Supply, erection, testing and

commissioning of non clog

submersible Drain Pump with CI

casing & CF8M impeller,including

necessary accessories and

hardwares, etc., 15m cable for

motor to starter panel, suitable

for 3Phase, 415 V, 50 Hz AC

supply and min. 2.2 kW motor,

Switch-Starter panel with

suitable inter lock for winding

protection, min. 10 m long

required size cable to supply

power to control panel from

nearby power source, moisture

controlar along with level

switches for dry run protection

for auto stop facilities, cable

termination junction box of

required terminal size,

supporting arrangement for

pump and other required

Signature of Contractor Executive Engineer (M&E)

Capacity : 10 - 15 m3 / hr.

( to be installed in dry well drain

16 Tools as per Annexure (M) and as 1 Lot 2,52,500.00

recommanded by manufacturer.

17 Design, Supply, Installation, 1 Nos 44,37,252.70

Testing and Commissioning of

Power cum Motor Control Centre

of 800 A, 415, FP , Power Cum

Motor Control Centre (PCC)

cubical having throghout the

required length & detachable,

fabricated from 2 mm( All Load

Bearing structure and Doors )

CRCA sheet steel, free standing,

compartmentalized, extensible,

dust and vermin proof enclosure

( Min IP 54 ), duly painted

provided with required rating

switch gears and shall be

complete with (a) required size of

FP Electrolyte 800 A Copper bus

bar having cross section not less

than 1.4 Amp per 1.0 Sq. MM, (b)

3 Nos. - 800 Amp capacity of

pole- EDO microproccessor based

Air Circuit Breaker with RS 485 /

RS 232 computer interface (2

Nos. for incomer + 1 No. as Bus

Coupler) (c) 2 Nos. - 800 Amp

capacity of 4 pole - EDO

microproccessor based Air Circuit

Breaker with RS 485 / RS

computer interface (1No. for

D.G.Set & 1 No. for bus coupler) -

All release of all ACB should have

in built power meter/ analyser

having, 3 phase, V, KW, I, KVA,

KVAh, KVArh, PF, Frequency,

harmonic analysis up to 30th

harmonic and last ten faults

history.with RS 485 / RS

computer interface facility and all

other required protection etc.,

complete. ,The PCC shall be

supplied as per detailed

specifications & single line

diagram (SLD) complete and the

Signature of Contractor Executive Engineer (M&E)

instruction of Engineer In charge.

OTHER OUTGOING : 1. APFC

Feeder 630 Amp 3P+N MP based

MCCB with LSIG Protections - Min

36 KA - 2 Nos 2. 100 Amp 4 Pole

36 KA OG for Lighting and Misc.

load - 8 Nos 3. 30 Kvar Fixed

capacitor feeder for Tr. No load

compensation - 2 Nos and

actuator for motor and header

200 KW 6 Nos VFD with 400 Amp

The VFD unit shall have modular

construction, 6 pulse Bridge

rectifier speed control by means

of sensorless vector control (open

loop) high torque at low

frequencies, looking at high and

low frequency settings. In built

PID control, frequency accuracy

of +- 1 % ( min ) frequency

resolution of +- 0.1 Hz ( Min)

protection against : a). Overload (

Motor and Drive ) b). Short

Circuit (c) Ground Fault (d) Input

/ Out Phase loss ( open circuit)

(e) Stalling (f) Input / Out put

under voltage ( momentary

power loss restart . (g) In put

Out put Overvoltage h). Over

Frequency (i) In put Surge (j)

Over Temprature of heat sink . (k)

Loss of remote speed signals etc.

The VFD shall also have user

friendly programming for I/o's,

speed search function, copy

parameter ( Up loaded / Down

Loaded ) to other identical unit,

turning to Energy saving Mode (

Maximum Efficiency ) Event /

Fault recording ( last 5 Faults in

non volatile memory & RS

communication port ( Modbus

RTU) protocol with required

software) with input filter and

out put filters as recomended by

OEM as per manufacture design.

One Hour meter of each motor

feeder shall be required to

Signature of Contractor Executive Engineer (M&E)

The PMCC shall be fabricated &

assembled @ approved

manufacturer having valid type

test certificate as per LATEST IEC

61439 ( Minimum : 65 KA fault

level and Temprature rise test )

and latest ISO 9001. All

switchgears shall be used as per

approved vendor list. The

protection and monitoring

parameter should be remotely

adjustable, when used with

communication features. The

separate indication for overload,

earth fault, over voltage, under

voltage on release with self-

power generated so it must show

on which type of fault, the

breaker tripped even in case of

input power not available. ACB

and MCCB ICU=ICS. MCCB shall be

double break with roto acting

mechanism and as per detail

technical specifications.

The DGVCL approved make and

model TVM having facility of RS

485/ RS 232 and motor on off

time and power failure time

recording facility shall be

provided in the motor feeder.as

per relevent IS , Data sheet and

Tender specifications.

18 Supply, installation, testing & 1 Set 4383692.90

commissioning both side

extensible, Indoor type HV

Switchgear panel confirming to

IS-3427, IS-2516 (Part I & II.sec.1

100/200 for use on 3phase,

Hz, unearthed AC supply system

and having breaking/ ruptuing

capacity of 500 MVA (26.3 kA for

3sec) complete with spring

charged mechanism, ON-OFF

mechanical push button,

operation counters,

Breaker TNC switch, Breaker L/R

switch, necessary auxiliary

switches, closing coil, shunt trip,

Signature of Contractor Executive Engineer (M&E)

protection relays & Indicators

The panel shall comprise of air

insulated busbars provided with

heat shrinkable PVC sleeves. The

VCB trolley shall comprise of

three vacuum interrupters with

epoxy support insulators and self

aligning finger type isolating

contacts and necessary

mechanical interlocks, safety

shutters, isolating plugs.

Enclosure shall be openable from

front as well as rear end. The

breaker shall be Manual cum

motorised mechanism with

following accessories.

a) 96 x 96 mm square flush

mounting type Ammeter & Volt

meter with selector switches

b) Multi function meter

c) Double core, cast resin type

current transofrmer having ratio

as per requirement, one core for

metering & one core for

protection having required class

d) Instantaneous under voltage

relay & Temperature rise tripping

e) Triple pole IDMTL two over

current and one earth fault relay

with current setting range 50-

f) Electrical closing. coil & shunt

trip coil operating on 110 V DC.

g) Auxiliary relay for anti

pumping device.

h) Three limb, drawout type,

feeder connected, cast resin

insulated, three phase Potential

transformer having ratio &

burden as per reqirement & Class

i) Annunciator Windows,

Common Hooter / Alarm bell

operating on 230 AC/ 110 V DC.

j) Cable boxes suitable to

terminate 3 core XLPE cable of

required size (As per design).

Signature of Contractor Executive Engineer (M&E)

k) 230V AC to 110 V DC power

pack for closing & tripping circuit

l) Breaker ON-OFF, Auto trip and

spring charged indicators.

m) Phase indicating & panel

illumination lamps with plug

n) Space Heater with Thermostat.

11 kV HV Switchgear Panel-

Comprising of 800 A Vacuum

circuit breaker for 2 nos. Incomer,

1 no. Bus coupler, 8 nos. O/G

feeders for Motor Soft Starters,

nos. O / G for 11 / 0.433 kV

Auxiliary transformers.

19 Design, Supply, Installation, 1 Nos 6,54,154.78

Testing and Commissioning of

APFCR panel @ Dahej II , 415V,

50 HZ , 200 KVAR shunt

capacitor with Filter control

module / APFC relay mounted in

enclosure from 2 mm CRCA sheet

steel free standing, floor

mounted, compartmetalized, dust

and vermin proof enclosure

having 2 mm thick sheet steel and

earth terminals duly painted

enclouser with capacitor unit

having 2 Nos, 10 mm earth

terminals and two externals,

three phase busbars of

Electrolyte copper supported on

epoxy insulator of adequete

rating and strips minimum

steps of APFC relay digital meters,

Indicating lamp.for power factor

improvement up to 0.999 lagging

with In comer MCCB, 7 %

detuned copper wound Filter set

comparising of 7 % detuned

copper wound Reactors

capacitors (APP type)

Thyristorised switcing Module

etc complete in all respect. as per

relevent IEC , Data sheet and

Tender specifications. and As per

drawing. make as per annex

400 KVAR: APFC panel consisting

following items.

Signature of Contractor Executive Engineer (M&E)

a) 800 A, 50 kA for 1sec. TP, MDO

type, ACB with TM based release

& accessories b) 0-800 A range

analogue ammeter of 96 x 96 mm

selector switch

cast resin type current

transformer d) Suitable rating of

MCCB/ MCB & Contractor for

each capacitor bank

e) Suitable rating APP type

capacitor banks (vacuum

impregnated with non-PCB / non

toxic oil, internally delta

connected with built in internal

fuses complete with discharge

resistances & terminal cover) of

approved make in required steps

with well suited detuned reactor

series with each capacitor step.

(e.g. 400 KVAR capacity will be

provided in steps of 2 nos x

KVAR, 2 nos x 10 KVAR, 2 nos x

15KVAR, 2 nos x

20 KVAR & 6 nos x 50 KVAR) f)

Enclosre dimensions: 2100 (H) x

20 Transformer 2 Set 12,07,001.51

SITC of outdoor type, three phase,

oil immersed, distribution

transformer of required KVA &

voltage ratio, copper double

wound, vector group - Dyn11, HV

delta connected & LV star

connected with neutral brought

out connected to provide

separate earthing terminals,

bushing / cable box on HV side

and cable box on LV side suitable

for cables or bus duct as per

requirement with standard

fittings, conforming to IS:

(Part-1) / 2014 with its latest

amendment including first fill of

transformer oil & following

(a) Oil conservator with filling

holes with cap and prismatic oil

Signature of Contractor Executive Engineer (M&E)

(b) Silica Gel dehydrating

breather charged with silica gel

(c) Oil drain cum sampling valve

(d) Oil filter valve

(e) Lifting Eyes / Hooks / Lugs

(f) Two earthing terminal

(g) Diagram and rating plate

(h) Air release plug

(i) Explosion vent with

(j) Thermometer pocket

(k) Four bi-directional plain

roller with base channel with

(l) Fixed / Separate type radiator

(m) Off circuit externally

operated tapping switch (For

rating < 1000 kVA)

(n) 100 mm stem type oil

temperature indicator (For rating

(o) Bucholtz relay with shut off

valve (For rating ≥ 500 KVA)

(p) 150 mm dial type oil

temperature indicator with Alarm

/ Trip contact (For rating ≥

kVA) (q) 150 mm dial type

winding temperature indicator

with Alarm / Tip contact (For

rating ≥ 1000 kVA) (r)

Marshalling box (For rating ≥

kVA) (s) 150 mm dia. magnetic

type oil gauge (For rating ≥

kVA) (t) Inspection cover &

Jacking lugs (For rating ≥

kVA) For transformer having oil

storage capacity for 2000 liters

and higher, nitrogen injection fire

protection system (NIFPS) is to

Effiency Level 3, Rating 800 KVA,

Maximum Total Losses (kW)@

50% Load /@ 100% Load /%

Impedance- 2.14/ 5.83/

21 Design, Engineering, 1 Nos 4,31,016.49

procurement, Installation, Testing

and commissioning of Lighting

Signature of Contractor Executive Engineer (M&E)

Distribution Board Distribution

board fabricated from 2 mm

sheet steel free floor standing

with one 415 V, 50 Hz TPN MCCB

as incomer and out going circuits,

including Electrolyte Copper bus

bars, metering unit lamps, timer

etc complete for lighting and

auxiliary power requirements. DB

complete as per specification,

single line diagram and

instruction of engineer In

charge.make as per annexure.

22 Design, Engineering, 1200 Mtr 1,542.27

procurement, Installation, Testing

and commissioning Power and

control cables 11 kV grade

aluminium conductors, UE, XLPE

insulated PVC sheatherd

armoured cable etc. 11 KV, 3C x

120 sq.mm. In transformer yard

cables shall be laid in cable trays

in RCC trenches with RCC

covers.make as per annexure.

23 Design, Engineering, 60 Nos 6,694.28

procurement, Installation, Testing

and commissioning Suitable size

Heat shrinkable cable end

termination kit for 11 KV, 3C

cable with weather proof double

comprission cable glands,

crimping type lugs, joints

supporting structure etc.Indoor

Type 120 Sq.mm as per cable

size.make as per annexure.

24 AS per above Outdoor type 120 20 Nos 12,840.13

sq.mm make as per annexure.

25 Design, Engineering, 240 Mtr 4,564.19

procurement, Installation, Testing

and commissioning XLPE ( IS

7098)(I) - 88 ISI marked

armoured cable multistrand

COPPER conductor for 1100 Volts

grade copper conductor XLPE

insulated, PVC sheathed stranded

armoured cable with bricks sand

cable route markers etc with

laying, glanding and termination

with suitable size lugs / nut bolts

with all required materials +

Signature of Contractor Executive Engineer (M&E)

labour. Cable shall be laid above

ground in cable trays installed in

over head cable trays. For

underground cables shall be laid

in cable trays in cable trenches.

For interplant cabling separate

cable rack / cable trench or

completed pipe cum cable rack

shall be used.make as per

annexure.minimum 1.1 kV, 3.5C x

185 sq. mm, XLPE insulated

armoured cable for LDB Panel

26 Design, Engineering, 115 Mtr 844.36

procurement, Installation, Testing

and commissioning XLPE ( IS

7098)(I) - 88 ISI marked

armoured cable multistrand

COPPER conductor for 1100 Volts

grade copper conductor XLPE

insulated, PVC sheathed stranded

armoured cable with bricks sand

cable route markers etc with

laying, glanding and termination

with suitable size lugs / nut bolts

with all required materials +

labour. Cable shall be laid above

ground in cable trays installed in

over head cable trays. For

underground cables shall be laid

in cable trays in cable trenches.

For interplant cabling separate

cable rack / cable trench or

completed pipe cum cable rack

shall be used.make as per

annexure.minimum 1.1 kV, 3.5C x

35 sq. mm, XLPE insulated

armoured cable for LDB Panel

27 Design, Engineering, 300 Mtr 1,415.01

procurement, Installation, Testing

and commissioning XLPE ( IS

7098)(I) - 88 ISI marked

armoured cable multistrand

COPPER conductor for 1100 Volts

grade copper conductor XLPE

insulated, PVC sheathed stranded

armoured cable with bricks sand

cable route markers etc with

laying, glanding and termination

with suitable size lugs / nut bolts

with all required materials +

Signature of Contractor Executive Engineer (M&E)

labour. Cable shall be laid above

ground in cable trays installed in

over head cable trays. For

underground cables shall be laid

in cable trays in cable trenches.

For interplant cabling separate

cable rack / cable trench or

completed pipe cum cable rack

shall be used.make as per

annexure.minimum 1.1 kV, 3C x

70 sq. mm, XLPE insulated

armoured cable 1 run for motor .

28 Do but 3 Core x 6 Sq.mm 150 Mtr 153.52

29 Do 3 Core 4 Sq.mm Pumps and All 365 Mtr 113.12

actuator operated Valves and

30 Design, Engineering, 200 Mtr 142.41

procurement, Installation, Testing

and commissioning XLPE ( IS

7098)(I) - 88 ISI marked

armoured cable multistrand

COPPER conductor for 1100 Volts

grade copper conductor XLPE

insulated, PVC sheathed stranded

armoured cable with bricks sand

cable route markers etc with

laying, glanding and termination

with suitable size lugs / nut bolts

with all required materials +

labour. Cable shall be laid above

ground in cable trays installed in

over head cable trays. For

underground cables shall be laid

in cable trays in cable trenches.

For interplant cabling separate

cable rack / cable trench or

completed pipe cum cable rack

shall be used.make as per

annexure.minimum 1.1 kV, 4C x

sq. mm, XLPE insulated armoured

cable for Lighting Distribution

31 Do but 4 C x 2.5 Sq.mm XLPE 350 Mtr 81.81

Insulated Armoured Cable for

Local Push Buttons.

32 Supply and Installation of Cable 4 Nos 173.72

end Termination of Power and

control cables including glands,

lugs etc complete in all respect

Signature of Contractor Executive Engineer (M&E)

for above cables.make as per

annexure. 3.5 core 35 sqmm

33 Do but 3 Core x 4 Sq. mm 28 Nos 64.64

34 Do but 3 core x 6 sq.mm 20 Nos 67.91

35 Do but 3 core x 70 sq.mm 4 Nos 101.00

36 Do but 4 core x 4 sq.mm 34 Nos 73.73

37 Do but 4 core x 2.5 sq.mm 500 Nos 73.73

38 Do but 3.5 Core x 185 Sq.mm 20 Nos 761.54

39 Providing & laying of 50 MM 200 Mtr 62.62

Nominal OD Doubled Walled

Corrugated Pipes (DWC) of

polyethylene (conforming to IS

14930 - II) with necessary

connecting accessories like

coupler, Tee, L - Bow, etc. of same

material at required depth (90

cms) including excavation for

laying of cable below ground/

road surface for enclosing cable

and back filling the same to make

ground as per original & as per

instruction of Engineer Incharge -

for Streelight Cable of 1 x 4 core x

16 Sq. MM and Service cable of

x 4 core x 16 Sq. MM -

40 Supplying and erecting 80 mm 140 Mtr 471.67

dia light duty "A" class GI Pipe

and erecting as directed by

Engineer In Charge.

41 Design, Engineering, 50 Mtr 471.67

procurement, Installation, Testing

and commissioning approved

make Perforated C type cable

tray. Made from pre- galvanized

CR sheet steel. The cable tray

should be bended as per IS

2062/1079 . with coupler plate /

Fish plate and GI hardware like

nut - bolt and washers etc.

erected on existing support as

per Specification and as per

instruction of engineer in

charge...Galvanised Iron Cable

Signature of Contractor Executive Engineer (M&E)

Trays.including necessary

supports, welding, insert plates,

etc complete with necessary

bends, tees gross, covers, reducer,

cover attachment, adjustable

elbow, connectors & y branch,

barrier strips and supporting

,erection hardware and

accessoseries.make as per

annexure. up to 300 mm x 50 x

42 Design, Engineering, 10 Nos 249.47

procurement, Installation, Testing

and commissioning of approved

make 'T' Junction for Perforated C

type cable tray. Made from pre

galvanized CR sheet steel. The

Junction should be bended as per

IS 2062/1079. with coupler plate

/ Fish plate and GI hardware like

nut - bolt and washers etc.

erected on existing support as

per Specification and as per

instruction of engineer in

charge..300 X50 X 1.5 mm thick T

43 Design, Engineering, 10 Nos 219.17

procurement, Installation, Testing

and commissioning of make '90°

Elbow' for Perforated C type

cable tray. Made from pre

galvanized CR sheet steel. The

Junction should be bended as per

IS 2062/1079. with coupler plate

/ Fish plate and GI hardware like

nut - bolt and washers etc.

erected on existing support as

per Specification and as per

instruction of engineer in charge..

300 X50 X 1.5 mm thick Elbow

44 Design, Engineering, 10 Nos 419.15

procurement, Installation, Testing

and commissioning of Lighting

System Internal Lighting –Point

wiring for Light with 2-1.5

sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated

multistrand copper wires, in

following type of pipe to be

Signature of Contractor Executive Engineer (M&E)

erected concealed in/ on surface

on wall/ceiling complete with 6A

Modular type switch / bell push &

accessories and earth continuity

of following type, erected on PVC

/ Metallic box, single mounting

base frame covered with

textured/metallic front plate

modules erected on / in wall /

ceiling as per pipe erected, with

necessary Lamp holder/ceiling

rose / H.D.Connector as

directed.(a) with medium class

rigid PVC pipe and accessories.

Light Points Cat-III

45 Design, Engineering, 4 Nos 1,191.93

procurement, Installation, Testing

and commissioning of Point

wiring for FAN with 2-1.5 sq.mm

& earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated

multistrand copper wires, in

following type of pipe to be

erected concealed in / flushed on

wall/ceiling complete with 6A

Modular type switch and hum

free EME four or more step type

electronic fan regulator with

separately mounted and

accessories with earth continuity

of following type erected on PVC

/ Metallic box, single mounting

base frame covered with

textured/metallic front plate

modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose /

H.D.Connector as directed.(a)

with medium class rigid PVC pipe

and accessories. Cat-III

46 Design, Engineering, 4 Nos 241.39

procurement, Installation, Testing

and commissioning of Point

wiring for Looped Plug with 6A

Modular type switch & 5 pin

socket erected on PVC / Metallic

box, single mounting base frame

covered with textured / metallic

front plate modules erected on /

Signature of Contractor Executive Engineer (M&E)

in wall / ceiling with following

type accessories Cat-III.

47 Design, Engineering, 20 Nos 669.63

procurement, Installation, Testing

and commissioning of Point

wiring for Individual Plug with &

earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV

grade FRLS PVC insulated

multistrand copper wires, in

following type of to be erected

concealed in / on surface of wall /

ceiling complete with Modular

type switch & 5 pin Plug erected

on PVC / Metallic box covered

with appropriate front plate

modules erected on / in wall /

ceiling as per pipe erected with

following type of accessories.[II]

For 16A Plug with 2-2.5 sq.mm

Cu. Wire (a) with medium class

Rigid PVC pipe and accessories

48 Supplying and erecting 90 W LED 8 Nos 5,976.17

street light / Flood light fittings

with High power White LEDs

wattage of 3 Watt and above

assembled on single MCPCB,

efficiency more than 130 lm/w

and corrosion free High pressure

die cast aluminum housing with

smooth finish powder coated and

heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened

glass with company mark/name

engraved or embossed 160 to

V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45,

Luminaire efficacy>

lumens/watt . LED driver

efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge

may select any wattage capacity

between the ranges

Signature of Contractor Executive Engineer (M&E)

shown.)Street Light (IP-65),

Surge protection -4KV integral

and ,Light must have 440VAC line

supply with over-voltage

49 Supplying and erecting 120 W 8 Nos 6,566.01

LED street light / Flood light

fittings with High power White

LEDs wattage of 3 Watt and

above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum

housing with smooth finish

powder coated and heat sink

extruded aluminium with diffuser

and Polycarbonate optics/ lenses,

with toughened glass with

company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD <

%, CCT 3000 K to

5700K,Uniformity ratio >0.45,

Luminaire efficacy>

lumens/watt . LED driver

efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge

may select any wattage capacity

between the ranges

shown.)Street Light (IP-65),

Surge protection -4KV integral

and ,Light must have 440VAC line

supply with over-voltage

50 Providing and erecting Approved 8 Nos 3,459.21

make Ceiling fan with double ball

bearing ISI mark with condenser

sweep complete, canopy and

cms. down rod erected on

existing hook or clamp with

24/0.2 , 3 core flexible wire with

earthing. [Make shall be approved

by Engineer in charge]

51 Supplying & erecting Fan Hook of 8 Nos 43.43

10 mm M.S. Round bar grouted in

Signature of Contractor Executive Engineer (M&E)

RCC slab with Making the site as

52 Supplying & erecting fan hook 8 Nos 126.25

box of 10 mm M.S. round bar

bounded to the RCC bars up to

50mm length each side and

pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box

complete erected concealed in

Ceiling with necessary finishing.

With 2.5 mm thick laminated

acrylic sheet to cover the fanhook

53 Supplying & erecting single phase 8 Nos 3,937.99

approved make industrial

exhaust fan suitable for medium

duty ring mounted low noise

operation suitable for medium

duty having following dia size and

maximum speed in RPM (A)

having 450 mm dia. Of 1400 RPM

speed. Cat - II

54 Providing & Erecting Mains with 200 Mtr 59.59

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type

of pipe to be erected concealed in

/flushed on wall/ceiling, with

sq. mm copper conductor FRLS

PVC insulated stranded wire of

green colour for earth continuity

of following size (From DB to

Switch borad lighting Cicuit + 16A

power plug+ water cooler) (e) in

existing pipe. (B) 2 wire

55 Providing and erecting Sheet 2 Nos 8,223.42

Steel powder coated MCB

distribution board - flush /

surface mounted fitted with

busbar, neutral link, earth bar

and DIN rail, confirming to IS

13032 and BS 5486-1986 without

MCB to house appropriate nos. of

MCBs.(The DBs should be used of

same company of MCB to be

used) Three phase 8 way SS

double door for single phase out

going horizontal box.( 1 No. for

each floor lighting distribution)

Signature of Contractor Executive Engineer (M&E)

Providing & erecting of approved

make ELCBs /RCCBs confirming

to IS: 12640 and having

sensivitive of 30 mA and short

circuits withstand capacity of

6KA and suitable for operation on

three phase and neutral 415V

having characteristic of quick

action & tripping with all advance

feature & do not incorporate any

electronic component for 63 A FP

erected as directed.(Cat-III) ( I st

floor lighting DB + 1 no II nd floor

DB) Providing & erecting of

Miniatuer circuit braeker single

pole 6A to 32A suitable to operate

on 240 V A.C. system and having

having breaking capacity 10 KA to

be erected in existing box

confirming to IS 8828 /

with ISI mark (Cat-III).

56 SITC of SITC of 08.00 Mtr Hot Dip 8 Set 27,435.64

galvanised Octogonal type

Streetlight Pole complete without

Bracket & accessories but

provided/ fitted with item no. (a)

to (h) mentioned below with

their specifications and Detailed

Specification (a) Providing and

fixing approved make Octoggonal

poles made from CR Sheet steel.

The poles should be made as per

IS and shall be coated with hot

Dip galvansing as per IS

2629/4759 with required base

plate suitable suspended local

wind speed erected on existing

foundation 8 Mtr long 70 mm top

x 155 mm bottom dia 3 mm

thickness Along with base plate.

(a) Overall length of pole :

(b) Planting depth :

(c) Height above ground level :

(d) Length of section - Out side

dia. & Wall thickness 3 mm

Bottom : 175 mm

Signature of Contractor Executive Engineer (M&E)

(b) Providing of Reinforcement

Cement Concrete (RCC)

foundation of 550 MM W x

MM x 1500 MM Depth in M -

or As per OEM Design ( c) Supply

and Installtion of M 20 x 750 long

'J' type EN 8 grade foundation

bolts along with template for the

above poles (d) Supplying and

Erecting bakelite Sheet 12 mm

thick HYLAM make on existing

Iron Frame (e) Funnel Type Pipe

Earthing. (f) Decorative Single

Arm Bracket (g) 1.1 kV grade FR

PVC insulated ISI Marked

Stranded Copper cable having

Conductor 2 Wire 2.5 Sq. MM. in

exising pipe/ in street light pole

erected with 1.5 Sq. MM. copper

conductor FR PVC insulated

stranded wire of green colour for

earth continuity.

(h) 90 Watt LED Streetllight

57 Lightening protection system for 80 Kg 886.78

highest building at plant area by

air terminal with rod and GI strip

conductor test link to earth

electrode as per requirement .

58 Supplying & erecting 600 mm x 11 Nos 7,874.97

600 mm x 3.15 mm thk. Copper

earth plate earthing burried in

specifically prepared earth pit

mtr. below ground with 40 Kg.

Charcoal and 40 Kg. salt with

alternate layers of charcoal & salt,

38 mm dia Medium Class G. I.

Pipe with funnel with a wire

mesh for watering & bricks

massanary block, C. I. cover

complete as per para 7.3 of IS :

3043 with necessary length of

double 8 SWG copper earth wire -

bolted to the plate and covered in

38 mm dia. G. I. pipe - 2.5 mtr.

long complete connected to the

nearest switch gears with end

socket as per direction & duly

tested by earth tester confirming

to ISS & as per drawing .

Signature of Contractor Executive Engineer (M&E)

59 Supply and Installation of GI 500 Kg 77.77

Earth strips for earthing 50 x

mm abd or requuired size GI

Strips for earthing of OCB, VCB,

LT Poqwer Cum Moot Control

60 Safety equipments as per 4 Nos 130.29

specificatios. Printed instruction

chart Gujarati and English

61 hand gloves(HT) 8 Nos 214.12

62 12 mm thick corrugated rubber 4 Sq.mtr 3,081.51

mat As per the scecificatation

mm thickness IS 5424 and of

required size lnngth and Breadth

and good condition property for

63 Supplying stand first AID box 4 Nos 299.97

with antiseptic cream, medicine

for use on wounds due burn,

crepe bandage, gauge bandage,

medicated ready to use bandage

(Band-aid) adhesive tape for

medicinal user, Scissors, anti-

septic solution (Savlon or similar)

etc. (All above contents shall be of

standard makes)

64 Supplying FIRE bucket round 16 Nos 214.12

bottom of 9 litres capacity made

out of 24 gauge G.I. sheet with

extra handle at bottom duly

painted white inside and Red out

side with FIRE mark, filled with

dry-sand and kept on existing

stand provided or hung on wall

65 Supplying and erecting floor 4 Nos 942.33

mounting stand for keeping four

nos. of FIRE buckets comprising

1500 mm in length, 900 mm

height frame made out of 30mm

X30 mm X 4 mm angle iron with

cross supports for legs, welded

with 4 hooks and duly painted

with one coat of red lead and two

coats of approved enamelled

66 Wall hook 22 to 25 cms. 16 Nos 60.60

projection for keeping fire

buckets made out of 15 mm dia.

Signature of Contractor Executive Engineer (M&E)

M.S rod grouted in wall to a depth

of minimum 15 cms.

67 Danger notice boards Medium 40 Nos 69.69

68 Danger Notice Board for High 20 Nos 81.81

69 Supplying & erecting D.C.P. type 8 Nos 2,226.04

fire extinguisher for following

capacity cartridge type with gun

metal cap 150 gram CO2 gas

cartridge, powder and brackets

confirming to IS 2171 1985 and

complete erected with necessary

clamps made from 50 x 6 mm M S

Flat with nuts and bolts grouted

in wall complete. 10 kg.

70 Supplying & erecting carbon 8 Nos 8,671.86

dioxide (CO2) fire extinguisher

user of following capacity with

necessary clamps made from 50 x

6 mm M.S. Flat with nut & bolts

grouted in wall complete. For

5.5/6.5 KG Capacity

71 Test equipments as per tender 1 Lot 1,04,452.18

72 Providing and casting in situ C.C 40 Mtr 9,177.10

in grade M-20 ( portion as per

mixdesign or as per table 9 of IS

456 2000 in masses by weigh

batching ) using granite,quartzite

trap matel of size 6 mm to 20 mm

for RCC work includinh scafolding

, centering, formwork, needle

vibrated, consolidation curing

comp RCC structure, thrust block

for supporting of valves and

header line as per site

requiremetn and instruction of

Engineer Incharge inside pump

house .RCC cable tench with RCC

cover for laying of cables from

panel to Pump room and DP

structure to Panel room width

mtr x 1 mtr indiside and 0.15cm

thick vertical, top and bottom.

73 Providing and casting in situ C.C 53 M3 11,110.95

in grade M-20 (portion as per

mixdesign or as per table 9 of IS

456 2000 in masses by weigh

batching ) using granite,quartzite

Signature of Contractor Executive Engineer (M&E)

trap matel of size 6 mm to 20 mm

for RCC work includinh scafolding

, centering, formwork, needle

vibrated, consolidation curing

comp RCC structure, thrust block

for supporting of valves and

header line as per site

requiremetn and instruction of

Engineer Incharge inside pump

74 SITC of 0- 10 kg / cm2 - 150 mm 9 Nos 1,426.12

dia, size Pressure Gauge with

siphon & cock and glysrin filld

type as per IS specification with

SS ball valve, SS hex nipple,

hardwares etc. as per the

direction of engineer incharge

(Pressure Guage fixing in each

pump set & header pipeline).with

required acessories, erection

hardware, necessary mounting

supports etc. complete. as per

relevent IS , Data sheet and

Tender specifications make as per

75 Supply, installation, testing and 9 Nos 29,438.47

commissioning of Pressure

Transmitter with local display

along with two valve manifold,

required fittings, tubing (all

valves, fittings, tubings, etc. shall

be in SS 316 only), all

accessories, hardware, etc.

complete in all respects as per

specifications and having

following measurement ranges:

Range : 0 - 10 Kg/cm2 (at each

pump delivery side and Pump

76 LEVEL MEASURING SYSTEM FOR 9 Nos 60,030.36

Supply, installation, testing and

commissioning of Ultrasonic type

Level Transmitter with remote

type transmitter with 20 meter

cable between Sensor and

Transmitter along with all

required accessories, Weather

proof enclosure for transmitter

for outdoor application, mounting

Signature of Contractor Executive Engineer (M&E)

stand , etc. complete in all

respects as per specification and

having following measurement

ranges for liquid (Effluent)

Meas. Range: upto 10 m

77 Supply, installation, testing and 12 Nos 12,930.02

commissioning of Displacer type

Level Switch SS Float for dry run

protection of pump through relay

multiplication in PLC), etc.,

complete in all respects and as

per specification.

Meas. Range: upto 10 m

78 ELECTRO MAGNETIC 6 Nos 3,06,254.22

FLOWMETER MAINS OPERATED

Supply, installation, testing and

commissioning of Full Bore

Electromagnetic flow meter

comprising of IP-68 Sensor with

PTFE liner , Hastelloy-C

Electrode, IP-66 transmitter with

20 m cable between sensor and

transmitter along with all

mounting accessories, Weather

proof enclosure for transmitter,

hardware, mounting stand, etc. as

per specification and to complete

the work in all respect as per site

condition necessary connection

with pipe and shall have

following size.

Meter Size : 350 mm NB

79 Do as above for Meter Size : 600 3 Nos 3,52,319.31

80 SITC of IoT based Gateway device 1 Nos. 1,20,000.12

for interfacing of flow meter

installed at various industries, as

well as GPRS based wireless

communication with cloud based

SCADA for overall monitoring

having following features at the

1 - 230 VAC and Battery operated

2 - Notification of 230 VAC Power

3 - Built in SD Card based data

storage for 5 years

4 - Built in RTC with GSM sync

Signature of Contractor Executive Engineer (M&E)

5 - Remote GPRS Connectivity

6 - Local Wi-Fi Connectivity

7 - IoT based Communication

8 - Ethernet connectivity with

battery powered

( better battery power life of

continuous operation, with one to

one battery shall be replace by

bidder at the time of any kind of

fault during the project period)

with data transferring speed as

per requirement.

81 SITC of M2M SIM cards with 2 Nos. 1,247.35

Postpaid connections with (5

GB/Month) data plan valid for

years as per requirement.

82 Design, Engineering, 1 Lot 23,46,785.50

procurement, Installation, Testing

and commissioning PLC and

SCADA System PLC and SCADA

system for the Procees and

Electrical parameter monitoring,

flow meters, level, pressure

transmitters, Energy meters,

Transformer, VFD.etc supervision

and control provided as per the

site requirements and All

Instrumentation equipment as

per the as per relevent IS , Data

sheet and Tender specifications.

Cloud based SCADA software

with hosted server having

following features at the

minimum with 5 years hosting

and maintenance charges:

1 - Cloud based Metering as well

as SCADA Software with

2 - 5 Years hosting & Software

charges including GPRS SIM card

3 - GPS/GIS with Google Maps

4 - Map based dashboard with

color indications

5 - Plot wise water consumption

report generation based on tariff

6 - Mobile app for notifications

Signature of Contractor Executive Engineer (M&E)

7- SCADA Software shall be

capable of monitoring at least

minimum 1000 flowmeters or

Pumping Staion and data field

devices As per site requirement

for ESRs and flowmeter

connections with future 50%

SCADA System Operator PC with

latest configuration for Overall

monitoring of the Network,

having following features

1 - Operator PC with latest

configuration of I5 or above and

22" monitor, UPS, - 02 nos

2 - Laser printer - 1 nos

3 - Table (01) and Chairs (04)

4 - Bidder has to provide all

networking equipments or

Internet connection devices only

Internet connection shall be

provided by GIDC for Engineering

& operator work station as per

specification and datasheet.

Billing for that internet

connection will be borne by

83 INSTRUMENT CABLE 80 Mtr 145.44

'Supply, Laying, Installation,

Connection, Termination, Testing

& Commissioning of Instrument

Cables as per specs.

The unit rate shall include

a)Supply, loading & unloading of

the cable at site from store.

b)Shifitng of cable from site store

to place of installation.

c)Fixing of cable clamps, brackets,

supports, route markers etc.

where ever required to fix the

d)Excavation, back filling and

levelling of ground alongwith

laying of fine sand, protection

bricks and other necessary civil

material for laying cables outside

f)Testing and submission of

sketches & reports of all the

Signature of Contractor Executive Engineer (M&E)

84 SIGNAL CABLE 80 Mtr 120.19

85 CONTROL CABLE 80 Mtr 273.71

86 INSTRUMENT CABLE TRAY 100 Mtr 840.32

Supply and installation / erection

of Perforated type cable tray of

galvanized mild steel sheets of

mm thickness with required,

hardware, fitting and support

structral asccessories . All

material shall be Hot dip

galvanised as per IS 2629 and

tray hardware shall be in GI.

Support structutre shall be of

structral steel for mounting the

cable tray on wall / cable trench

or as per site condition,

600 X 25 mm - Perforated type

87 200 X 25 mm - Perforated type 100 Mtr 325.22

88 50 X 25 mm - Perforated type 100 Mtr 109.08

89 CABLE END TERMINATION AND 40 Nos 137.36

'Supply, fixing, connection, testing

and commissioning of double

compression brass cable glands

and crimping type Bimetalic lugs

/ sockets with necessary tools

and equipments as specified in

specifications and IS complete in

all respects. The glands and lugs

/ sockets shall be suitable for

cable size and type mentioned

above. The job also includes

earthing the glands and armour

of the cable with common earth

bar or flexible copper mesh as

90 SIGNAL CABLE 45 Nos 137.36

91 CONTROL CABLE 35 Nos 299.97

92 Online Influent Monitoring 1 Nos 47,65,852.90

System Including Centralize

Signature of Contractor Executive Engineer (M&E)

Monitoring System and Provision

to Data Connectivity to GPCB and

CPCB. Technology: UV-Vis Entire

Spectrum Technology (200nm-

720nm). MOC: Titanium for COD

BOD TSS and SS316L for pH TDS

NH4-N and NO3-N. Cleaning

Method: Ultrasonic Cleaning with

Air Cleaning. Remote Access

Facility Must be Available and Its

Should be Cover with Digital

Locking System.

93 Comprehensive O&M&R for 60 60 Month 73,605.00

Months work Including

manpower for operation 24 x

days 365 days, maintenance, any

reagents & consumables, spares

for all pump station, Automatic

system or all system installed

under this work as Follow the

Technical Specification as the

Technical Bid Document and

*The rate shall be Exclusive of all taxes (Excluding GST)

I/We agree to carry out above work at __________ % above the estimated Rate put to tender

Percentage in words ( _______________________________)

I/We agree to carry out above work at __________ % below the estimated Rate put to tender

Percentage in words ( _______________________________)

Estimated Amount put to Estimated Amount put to

Tender Rs. 4,95,10,474.00 Tender Rs.

Add % Above Rs.____________ . Deduct % Below Rs.____________

Net Amount Rs.____________(In figures). Net Amount Rs.____________(In figures)

I/we have read the condition mentioned in this tender and agree to abide by the same.

Signature of Contractor Executive Engineer (M&E)