PROVN OF MUSTER ASSEMBLY AREA FOR CG PERSONNAL OF RHQ(NW) AND ICGS ALONGWITH INTERLOCKING TILES AND MISC SERVICES AT CG LAND LEKAWADA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil

Excavating in trenches , n exc 1.5 m wide and n exc 1.5 m depth for foundation etc. Or for shafts , wells manholes, pier holes etc. N exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil

M&L Returning, filling in,including spreading, levelling , watering and well ramming in layers not exc 25 cm

Removing excavated material n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point.

Earth filling under floors including spreading , levelling watering and well ramming in layers not exc 25 cm thick.

M&L hardcore of broken stone or boulders , gauge not exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface all as directed.

M&L for PCC 1:4:8 type D2 using 40mm Grade stone aggregate as in foundations, fillings and mass-concrete, sub base of floor

M&L for brick work with Fly Ash bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as directed.

M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span complete all as directed.

M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in Columns, pillars, piers, posts and struts complete all as directed.

M&L RCC M-25 (Design Mix) slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L for rough finish formwork to sides of concrete foundations, footings , bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete.

M&L for rough finished formwork to sides and soffits of floor or rooof beams, beam haunching, girder s , lintels, cantilevers, shelves including supports, overhangs etc.for rough finished flat surfaces of concrete.

M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work : not exceeding 200m thick (horizontal or sloping) for fair finished flat surfaces of concrete.

M&L for rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions

M&L Mild steel CRS TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per item no 17 above but 6mm to 8mm dia

All as per item no 17 above but 6mm to 8mm dia as in stirrups

M&L applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application all as directed.

M&L preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete as directed.

Supply only integral waterproofing compound ISI marked.

M&L Rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work (Internal Surface) including finished even and smooth without using extra cemnet

M&L Rendering 15 mm thick cement plaster in CM 1:4 on other faces on brick masonry (External surface)

M&L Rendering 5mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement.

M&L for applying two coats of OBD on newly plastered surfaces over a coat of primer over a coats of wall care putty 1 mm thick including preparing the new wall surfaces complete all as directed

M&L Preparing new plastered surfaces and applying three coat of white wash on Ceiling

M&L preparation of newly plastered surface wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparing new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted toceiling or laid under floor.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F stainless steel grating doom 100 mm dia all as directed

S&F in repair viterious china urinals with sensor size 720mm x 485mm x 300mm as per Jaquar cat part No URS-WHT-0707 and sensor cat part No SNR-51097 (Sensotronic sensor flushing valve for urinal with complete kit (suitable for urinal URS-WHT-707) or equivalent as approved by GE

S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed

S&F angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore

S&F Brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges

S&F 5 mm thick glass looking mirror with chamfered edges of minimum size 600mm x 500mm fixed with minimum 4 Nos stud at each corner of mirror complete all as specified

Soap dish fixed to plugs with chromium plated brass screws

S&F CP Health faucet complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore fancy type CP Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified

S&F in repair viterous China table top wash hand basin white size 160mm x 495mm x 365mm as per Jaquar Cat Part SLS-WHT-0558

S&F 32mm dia PVC (flexible) waste pipe, 800mm long for WHB complete.

S&F EWC bowl for extended wall hung-WC with soft closing seat cover, size 635 x 365 x 770 including cistern with cistern fittings Make - Jaquar (Cat pat No - CNS-WHT-353S) complete all as specified and directed by GE.complete all as specified and as directed by Engr-in-Charge

S&F Tubular towel rail CP Brass, 60cm long between flanges complete all as specified and as directed by Engr-in-Charge

S&F Toilet Roll Holder with flap, Make : Jaquar (Cat Pat No AQN-7753) or equivalent as approved by GE. complete all as specified and as directed by Engr-in-Charge

S&F Soap Dish Polycarbide, Make : Jaquar (Cat Pat No AQN-7733) or equivalent as approved by GE. complete all as specified and as directed by Engr-in-Charge

S&F 15mm brass CP Central Hole Basin Mixer quarter turn with Popup waste system with 450 mm long braided hoses etc. Make : Jaquar (Cat pat No CQT-CHR-23169B or equivalent as approved by the GE as per the list of makes.

S&F CP Towel ring complete all as specified.

S&F ball valve / float valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms)

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls110 mm bore

S&F PVC (SWR) bends any radius 75 mm bore

S&F PVC (SWR) bends any radius 110 mm bore

S&F Salt-glazed stoneware gully traps, square or round mouthed, type `P' size 150mmx150 mm

S&F PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 75 mm

S&F PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 110 mm

S&F Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 500 ltr including necessary nipple and nuts complete all as specified and directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as directed

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&l 25 mm Thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate under floor tiles

M&L 75 mm of thick PCC (1:3:6) type C-2 using 40mm grade stone aggregate as in plinth protection

S&F 150 mm bore reinforcement cement concrete pipe class NP2 laid and jointed complete with collar all as specified and as directed.

M&L concrete bed in PCC 1:4:8 type D-2 to drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested.

M&L cutting into existing man holes for connecting new drains of 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqd.

M&L precast RCC 1:2:4 type B-1, using 20mm graded stone aggregate for manhole cover including placing over manhole all as specified including demolition of old RCC manhole covers. Note :- Reinforcement shall be measured and paid separately.

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in copings, kneelers, apec stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:4 etc. complete all as specified and as directed by Engr-in-Charge.

Rounding to edges of stone slabs one edges such as in steps, cooking platform, shelves and other similar situations

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified

M&L for Medium density fibre board interior grade 18 mm thick solid construction type, fixed in CBs door shutters on timber frame work with screws /nails complete all as specified.

M&L for 0.9 mm thick Decorative laminate type-1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified

S&F butt hinges type B-12 or (overlay/ self / auto closing hinges ) for cupboard / shelves shutters of size 125 mm complete all as specified

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

Removing excavated Soil exc.500 m and n.exc 1.50 Km depositing where directed at a level n exc 1.5 m above the starting point.

M&L for approved fertile earth filling in floors or pavings, suitable for plantation incl watering maneovering of earth.

Supplying and Planting of avenue trees of approved species as per direction incl excavation of pits of required size and depth in all types of soil and back fill approved back cotton soil after soil treatment with chemical and fertilizer, incorporating manure of approved quality in the proportion of 1:3 (One part of manure & 3 part of soil) manure 200 gm per plant and using pesticides of approved quality etc and removing surplus soil to a distance n.exc 1.50 Km and depositing where directed.

(a) Ficus Plant ht not less than 900 mm

(b) Casurina Plant ht not less than 900 mm

(c) Justucia Plant ht not less than 900 mm

(d) Fox tail palm Plant ht not less than 1800 mm

(e) Flower Plant like ixora, Jarropha etc

(f) Herbal Plant

S & F Railing using stainless steel pipes, squares etc of hollow section including provision of architechural finials of grade SS 316, etc complete all as specified and directed by Engineer in Charge.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified

S&F Powder coating Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows ventilators and partation with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engr-in-Charge

S&F Butt hinges, 100 mm medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-Charge

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm complete all as specified and as directed by Engr-in-Charge

S&F Aluminium, anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge

S&F SS handle 100 mm long, complete all as specified and as directed.

Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves ,lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed

M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0M X 4.5M

Excavation over areas. n.exc 1.5 m deep and, getting out in soft/loose soil all as spd.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good disturbed surfaces.

M&L PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including 10mm dia MS round bars as in tie bars fixed to fencing posts including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290).

S&F 4 mm dia galvanised steel wire 150x100 mm Mesh (chain link fencing) made up matress fixed to any type of std rails straining bolts etc incl provn of binding wire

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm

M&L preparation of new steel surfaces of any description when unconnected with other painting or when painted in a different tint not exc 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S&F 2mm thick Fibre glass reinforced translucent corrugated with two corrugations side lap fixed with coach screw and washer in roof and / plain sheeting in wall cladding / fencing on iron frame etc complete all as specified

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M & L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates in sub base complete

M&L for Rubber moulded Chequered cement concrete tiles 30 cm x 30 cm x 20 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc with grey cement and pigment (Coloured Tiles) complete all as specified and as directed

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in 12mm thick in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete

M&L preparing new concrete surfaces and applying two coats of synthetic emnamel paint over one coat of plaster coat primer

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core

M&L Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 ,9.0 metres long including 02 coats synthetic enamel painting over a coat red oxide primer complete all as specifed and directed Note:-Excavation, Earthwork, PCC for Foundation and Coping will be measured and paid separately in respective items of this schedule

Excavation in trenches n.exc 1.5 mtrs wide and n. exc. 1.5 mtr in depth for laying of electric cables for fixing of poles and stay or for laying pipes (where provided for protection of cables) and getting out trimming the sides forming bottom surface to required level in soft/loose soil complete all as specified and as directed.

Supply and lay common burnt clay brick sub class `B' old size as in cable protection,laid flat with axis of brick perpendicular with axis of cable in trenches abutting each other complete all as specified and as directed

M&L for Cement concrete in foundations,filling and mass concrete in PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) for steel tubular pole and filling in road cutting etc. Complete all as specified and as directed

M&L for providing coping for steel tubular poles in PCC 1:3:6 Type- C1 (using 20 mm stone aggregate) including weathering, slightly rounded or chamfered angles and throating all as directed

S&F High Performance 59/60 Watt street light luminaire having Single Die ceramic base high power LED light source, IP66 protection, PDC housing with Finless design and polycarbobate cover (IK08). The luminaire family comes with dedicated street Optics making it suitable for B2 Category roads. Pole Dia: 48-60mm Make:- Philips, Item Code-BRP056 LED59 CW SLF PSU S1, D or Bajaj/HPL//GE or equivalent

Supply and fix GI pipe bracket for street light fittings, made out of 40 mm bore,light grade,1500 mm long, duly bend to shape and fixed to steel pole with 50x6 mm flat iron MS clamp and necessary nuts, bolts and washers complete all as specified and directed

Supply and fix PVC looping box(enclosures) of size 300x200x155 mm comprising of 02 Nos of aluminium bus bar 100 Amps rating, fixed on porcelain insulators, earthing terminals and one MCB SP 6/16 Amp complete

S&F LED post top made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection made in cast aluminium spigot housing with decorative clear acrylic diffuser with 40W LED and inbuilt driver.Make: Polycab ,Item Code-PGR0201010, Description-PCGLPT0140C or Equivalent of Make Bajaj/Philips/CG

S&F LED Light 18W Ground Burial Compact and robust design with diecast aluminum housing and stainless trim, IP68 waterproof connectors. Make -Philips Cat No BBP343 LED1800/WW 18W 20D 100-240V or Equivalent of Make Polycab/Bajaj /CG

S&F LED bollard light13 watt 800mm , 5700K,IP-54 of Make- Polycab Item Code-PGR0301001 or equivalent of Make-Philips/Bajaj/CG

M&L for tubes light grade galvanised iron pipes of 25 mm sizes with all fittings and fixed to wall/ pole / under road / culvert / drain or laid in floors,complete incl taking the corroded all as specified and directed.

M&L for tubes light grade galvanised iron pipes of 40 mm sizes with all fittings and fixed to wall/ pole / under road / culvert / drain or laid in floors,complete incl taking the corroded all as specified and directed.

Supply and Install pumping sets mono block , self priminng, single phase, centrifugal, electric driven 2HP complete inclusive of starter and PCC foundation.

Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm (1/2”) dia laid in tranches

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia laid in tranches

Supply and fix Valve, stop, screwed,15 mm (1/2”) dia pipe laid in tranches

Supply and fix Valve, stop, screwed, 25 mm (1”) dia pipe laid in tranches

M&L for PVC under ground water storage tank of capacity 2000 ltrs with connection to existing pipe line complete all as specified and as directed by Engr-in-Charge Note: The quoted rate includes excavation and earthwork

M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ casing capping/open coduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site , box made from not less than 1.6mm GI sheet factory made complete all as directed for the following.

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) –do- but one 3 Pin socket out let 5 Amps on the same board.

All as per item No. 135 above but 2.5 sq mm wire for 15 amps power socket point.

S&F Modular metal flush box 3 module

S&F Modular metal flush box 6/8 module

S & F white cover plate with frame , 3 module

S & F white cover plate with frame ,8 module

Supply & Fix modular switch one way 6A,1 Module,

Supply & Fix modular switch one way 16A,1 Module,

Supply & Fix modular socket 6/10A-2/3 pin combined 2 Module

Supply & Fix modular socket 16/15A-2/3 pin combined 2 Module

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 4 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge.

S&F MCB SP 6 to 32 Amps, 'B' Series 10 KA.

S&F MCB SPN 230 volts 32 Amps "B" series 10 KA.

S& F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copperconductor cable of suitable size of make-Philips/HPL/Orient/SYSKA or equivalent

Supply and fix exhaust fan made of sturdy Engineering plastic complete withlouv ers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m

Supply and fix in repair Surface and wall mounted LED batten 10 watt 2 feet, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. of Make-Havells, Odering Code-ENDURALINEARNEOBS10WLED865SPCWH or equivalent Cat No of Make-Philips/Bajaj/Wipro

Shree Builders

K K Construction Co

DATTA SURYAKANT CHAUDHARI

JIYA CONSTRUCTION

Shreeganesh Construction

New Tech Projects India

ARTI CONSTRUCTION

Ramdev and Sons