Loading…
Loading…
Tender Value
₹24.6 L
EMD Value
₹25,000
Closing Date
20 Jun 2026, 6:00 pm
Executive Engineer, Panchayat (R&B) Division, Godhra
(Package No. 43) Repairing work of Pashudawakhana at Kathola and Tarvadi Ta. Halol, Dist. Panchmahal
308026
04 of 2026-27
Open
Civil - All
Panchmahal
7 documents required · 7 mandatory
₹900
Executive Engineer, Panchayat (R&B) Division, Godhra
₹25,000
25 May 2026
25 May 2026
25 May 2026
20 Jun 2026
25 May 2026
No. figures Amount
1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 26.00 No. 182.94
including chowkhats architraves, holdfasts and other attachment etc.
complete and stacking them within all lead and lift.(i) Not exceeding
Sq.M. in area.
2 Dismentling wood work, wrought framed and fixed in frames trusses 3.43 Cum 1711.65
including stacking the materials with all lead and lift.
3 Dismentling steel work including distempering and stacking the 406.80 Kg. 3.67
materials with all lead and lift.
4 Dismantling sanitary fittings like wash basin, W.C. pan Indian and 3.00 No. 394.51
European type, flushing tank etc. including stacking the materials with
all lead and lift.
5 Dismentaling tiled of stone floors laid in mortar including stacking of 226.42 Sq.m. 46.77
serviceable materials and disposal of unserviceable materials with all
lead and lift.
6 Demolition of terrace including stacking of serviceable materilas and 138.72 Sq.m. 62.21
disposal of unserviceable materials with all lead and lift.(i) Brick tile
7 Demolition of Brick work and stone masonry including stacking of 6.64 Cum 536.09
serviceable materilas and disposal of unserviceable materials with all
lead and lift.(ii) In Cement Mortar.
8 Demolition including stacking of serviceable materilas and disposal of 16.69 Cum 1030.81
unserviceable materials with all lead and lift. (i) R.C.C. work
9 Removing dry or oil bound distemper by a washing and scraping and 1084.06 Sq.m. 10.99
sand papering the wall surface smooth including necessary repairs to
scratches complete.
10 Removing and scraping of old deteriorated plaster of any thickness 138.20 Sq.m. 18.94
fromm wall / R.C.C member including stacking of serviceable material
and disposal of unserviceable from site of work with all lead and lift
11 Scraping oil paint from steel and other metal surface and making the 73.81 Sq.m. 49.32
surface even (with Hand Scraping)
12 Carring out plinth treatment to post construction / existingstructure by 210.34 Sq.m. 63.80
spraying chemical solution for termite controltreatment including labour
and material consistment withI.S.I specification. Using Chlordene and
Chiorpurfiles 20 EC.As Per 6131_paret-II Consentration Weight one
percent isrecommended i.e one litre 20 EC chemical emulsion with19
liter give 1 % concrentration inclusive of one litrechemical emulsion
appication at the rate of 5 Litrechemical / Sqm of surface is
recommended as per I.S
13 Carrying out wall treatment for termite control including spraying with 550.20 Sq.m. 26.57
chemical solution in oil base including labour and material using
Chlorpyriphos 20 EC as per IS 6313 part - II (1% concentration by
mass) is recommended i.e. one litre chemical emulsion diluted with
liter oil base. Total solution will be 20 liters inclusive of one liter
chemical emulsion application at the rate of 7.5 litre chemical / Sqm of
surface is recommended as per I.S.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
14 Polymer Modified Mortar (up to 50mm) : Providing and Applying single 19.31 Sq.m. 6622.57
component, dual shrinkage-compensated, high strength, fibre
reinforced, thyrotrophic cementitious patch repair mortar that achieves
compressive strength minimum of 15 MPa at 1 day and 45 MPa at
days and capable of applying up to 50mm thick in single layer such as
, to the prepared concrete area FOR AVERAGE THICKNESS OF
60MM, after applying bonding coat if required as per manufacturer’s
specification, before the bonding agent becomes tack free, initially by
hand and finally finishing the same with trowel carefully compacting the
same around the rebar and finishing to bring it in line with existing
concrete surface on the columns, slabs, beam etc., where the
thickness of application is less than 50 mm in patches as per
specification . Item rate is inclusive of materials (excluding Bonding
agent) all labour, tools and tackles and transportation etc. complete as
per specification and as directed by Engineer.-in-charge.
15 Providing I.S.I. mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 4406.00 Kg. 76.21
including bending, binding and placing in position complete upto floor
two level.
16 Providing & fixing 40 mm thick Single shutter flush door solid core 14.79 Sq.m. 7342.70
finished with both side 1 mm thick lamination both side like 'NOVAPAN
'or equivalent, of natural wood grain shade as approved by this office
having telephone black granite 18 mm thick frame with double stone as
per the instruction of Engineer in charge with necessary SS hinges and
fixtures etc. complete.
17 Providing & fixing 35 mm thick Single shutter flush door solid core 7.02 Sq.m. 6933.65
finished with both side 1 mm thick lamination both side like 'NOVAPAN
'or equivalent, of natural wood grain shade as approved by this office
having telephone black granite 18 mm thick frame with double stone
including fixed ventilation above lintel level as per drawing and as per
the instruction of Engineer in charge with necessary SS hinges and
fixtures etc. complete.
18 Providing and fixing window having extruded aluminum colour anodized 26.40 Sq.m. 3199.68
section frame main outer size 95mm x 24mm x 1.17mm (of Jindal
section no.2459 @ Wt. 0.738 Kg/mt), horizontal three track member
size 92mm x 31.75mm x 1.30mm (of Jindal section no. 8688, @ Wt.
1.07 Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (of
Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding shutters of
horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section
No. 8947 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x
18mm x 1.29 mm (of Jindal section no: 8949 @ Wt. of 0.456 kg / mt)
with 5 mm thick transparent bronze colour tinted float glass with powder
coated aluminum fittings and fixtures and transparent silicon sealant
glass fixing including granite frame as per details etc.
19 Providing and fixing louvered type ventilators with powder coated 1.44 Sq.m. 13732.97
aluminum fittings and fixtures and Blur glass fixing to adjustable louvers
and black granite frame as per details and executed as per directed by
Engineer in charge.
20 Providing and fixing M.S. grills of required pattern to wooden / Wall / 502.82 Kg. 143.42
Marble / Granite / Stone frames of windows etc. with M.S. flats at
required spacings and frame alround, square or round bars with round
headed bolts and nuts or by screws (A) Ornamental Grill.
21 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 155.94 Sq.m. 1334.64
20mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand)
on new surface or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and jointed with color cement
slurry including finished with flush pointing & cleaning the surface etc.
complete for light skid
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
22 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 13.47 Sq.m. 1397.83
20mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand)
on new surface or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and jointed with color cement
slurry including finished with flush pointing & cleaning the surface etc.
complete for antiskit
23 Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skirting, 67.87 Sq.m. 1141.45
risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement :
3-coarse sand) and jointed with white cement slurry for dedo.
24 Providing and laying 18 mm thick machine cut ,free edges ,machine 6.70 Sq.m. 3325.93
polished Black Granite tread and risers in single piece with 1 cm
nosing and necessary grooves on treads etc. complete.
25 Providing and laying broken chine mosaic flooring for terrace 207.68 Sq.m. 747.29
using 12 mm to 20 mm broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be tempered to bring
mortar creme out upto surface using white cement including
rounding off junctions and extending them upto 15 cm along the
wall,clearing with water and oxalic acid etc. as directed.
26 Providing and laying BBCC of 75mm th. Layer in CM (1:3) including 68.59 Sq.m. 679.73
enginner incharge .i.e.perma or other with leveling complete for ready
base of china mosaic tratment.
27 Applying two coats of putty & two coats of primer of approved brand 524.61 Sq.m. 40.59
and manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth. (For Interior wall)
28 Applying two coats of putty & two coats of primer of approved brand 169.08 Sq.m. 42.67
and manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth. (Ceiling Putty)
29 Wall painting two coats with plastic emulsion paint of approved brand 524.61 Sq.m. 108.73
and manufacture on wall surfaces to give an even shade including
throughly brushing the surface free from mortar droppings and other
foreign matter and sand papered smooth. (Interior Wall Paint)
30 Wall painting two coats with plastic emulsion paint of approved brand 169.08 Sq.m. 108.45
and manufacture on wall surfaces to give an even shade including
throughly brushing the surface free from mortar droppings and other
foreign matter and sand papered smooth. (Ceiling Paint)
31 Finishing wall with water proofing cement paint of on wall surfaces(Two 1190.42 Sq.m. 58.08
coats) to give an approved brand and manufacture and of required
shape even shade after thoroughly brushing the surface to remove all
dirt and remains of loose powered materials as damp proof coat.(as
Damp Proof)
32 Finishing wall with weather proof exterior emulsion paint on wall 638.89 Sq.m. 114.53
surface (two coats) to give an required shape even shade after
thoroughly brushing the surface to remove all dirt, dust and remains of
loose powdered materials etc. complete (For Exterior Wall Paint)
33 Water proofing materials silicon base Water repellent compound. 45.11 Liter 209.71
34 Labour Work for Laying And Spraying of water proofing material. 8.00 Day 773.66
35 Applying priming coat over new steel and other metal surface after and 74.86 Sq.m. 33.41
including preparing the surface by throughly cleaning, oil, grease, dirt
and other foreign matter and scoured with brushes fine steel wood,
scrapers and sand paper with ready mixed priming paint brushing red
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
36 Painting two coats (excluding priming coat) on new steel and other 74.86 Sq.m. 95.95
metal surface with enamel paint, brushing, interior to give an even
shade including cleaning the surface of all dirt, dust and other foreign
37 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 5.00 Rmt. 148.12
U.P.V.C (Sch-40) for cold water including fitting as approved by
Engineer in charge. Pipe shall be fixed on the wall with held of clamp at
every two meter c/c shall be concealed or open as directed including
necessary fitting etc. including testing of pipe and joints and fixing the
same with adhesive solvent including cost of all materials.
38 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 7.00 Rmt. 91.84
U.P.V.C (Sch-40) for cold water including fitting as approved by
Engineer in charge. Pipe shall be fixed on the wall with held of clamp at
every two meter c/c shall be concealed or open as directed including
necessary fitting etc. including testing of pipe and joints and fixing the
same with adhesive solvent including cost of all materials.
39 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 10.00 Rmt. 72.65
U.P.V.C (Sch-40) for cold water including fitting as approved by
Engineer in charge. Pipe shall be fixed on the wall with held of clamp at
every two meter c/c shall be concealed or open as directed including
necessary fitting etc. including testing of pipe and joints and fixing the
same with adhesive solvent including cost of all materials.
40 Providing and fixing concealed center point to wall ceiling & floor I.S.I. 3.00 Rmt. 653.77
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. [F] 50 mm dia.
41 Providing and fixing concealed center point to wall ceiling & floor I.S.I. 5.00 Rmt. 249.72
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. [C] 25 mm dia.
42 Providing, laying and jointing in true line and level I.S.I. mark 110mm 20.00 Rmt. 835.15
dia. U.P.V.C. SWR Type B pipe confirming to IS 13592-1992 with one
end plain and other end socketed with rubbering & fitting conforming to
ISI 14735-1999 of approved make for drainage system pipe line, pipe
shall be jointed with each other with rubber lubricant, pipe shall be fixed
on wall using of PVC clamp of the size 110 mm diameter x 149 mm
length x 145 mm height at every 2000 mm center to center or shall be
concealed in walls as directed including necessary fittings such as
bends, shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
43 Providing and fixing screw down bib taps of following size (B) brass 9.00 No. 214.81
chromium plated screw down bib tap (ii) 20mm dia. as directed by
Engineer in charge.
44 Providing and fixing chromium plated brass half turn flush cock of 7.00 No. 263.77
approved quality including fixing in pipe line etc. complete (ii) 25mm
45 Providing and fixing Gun metal check or non-return fullway wheel valve. 4.00 No. 663.43
(E) 40mm dia.
46 Providing and fixing Gun metal check or non-return fullway wheel valve. 3.00 No. 420.63
(C) 25mm dia.
47 Providing and fixing washbasin with single hole for pillar tap with C.I. or 2.00 No. 7325.53
M.S. brackets painted white including cutting holes and making good
the same but including fittings.(A) Vitreous China (ii) Flat back
washbasin 560 mm x 410mm x 200mm size.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
48 Providing and fixing C.P. brass towel rail complete with C.P. Brass 3.00 No. 603.19
brackets fixed to wooden plugs with C.P. brass screws. (B) 600 mm x
20 mm size.
49 Providing and laying wash down water closet (European type Wall 2.00 No. 10261.60
Hung WC pan) Florentine series FLS-WHT 0111B including providing
and fixing metropole flush cock seat cover, jet wash etc complete unit
of Jaquar brand (or equivalent) including installing and fitting as per
manufacturers standards by skilled trained plumber including testing
etc. complete quality and brand as approved by Engineer in charge.
50 Providing and fixing Urinal of approved quality including connection 3.00 No. 1557.35
with trap and with integral longitudinal flush pipe. (A) Squating plate
pattern white earthenware 550mm x 300mm
51 Providing, laying and jointing in true line and level I.S.I. mark 160mm 7.00 Rmt. 831.22
dia. U.P.V.C. SWR (Type B) pipe confirming to IS 13592-1992 with one
end plain and other end socketed with rubbering & fitting conforming to
ISI 14735-1999 of approved make for drainage system pipe line, pipe
shall be jointed with each other with rubber lubricant, pipe shall be fixed
on wall using of PVC clamp of the size 160 mm diameter x 210 mm
length x 196 mm height at every 2000 mm center to center or shall be
concealed in walls as directed including necessary fittings such as
bends, shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
52 Providing and fixing PVC SWR Nahni trap IS 14735 for drain with jali of 5.00 No. 558.36
the following nominal diameter of self cleaning design with C.I. screwed
down or hinged grating including the cost of cutting and making good
the walls. (i) 100mm dia.
53 Providing erecting and fixing double coated Syntex or equivalent PVC 2000.00 Litre 3.95
(I.S.I.) mark water tank of required capacity each with all necessary
fittings & connection etc. complete on terrace.
54 Providing and fixing ball cock of approved quality as directed.(A) 2.00 No. 132.89
Copper metal (i) 25 mm dia.
55 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 21.95 Cum 4099.59
Coarse sand : 4- graded stone aggregates 20 mm nominal size) and
curing complete excluding cost of formwork and reinforcement for
reinforced concrete work in foundations, footings, base or columns and
mass concrete.
56 Providing and fixing precast Rubber Dye / steel Dye inter locking 142.60 Sq.m. 686.90
concrete block 60mm thick with grade of concrete M-300 pneumatic
compressed / vibrated mechanically and as per approved design
confirming to IS 15658 : 2006 including 35 mm sand layer for levelling
and filling the joint with sand in proper line and level as per guidelines
of IRC : SP 63-2018 etc. complete.
57 Providing and fixing precast concrete kerb stone of gray cement based 13.80 Rmt. 361.64
concrete block 30cm length,30cm height and 15cm thick of M-250
grade concret as per approved design and including excavation for
fixing in proper line and level, filling the joint with C.M. 1:3 (1 cement :
fine sand) etc. complete.
58 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 2.00 No. 833.73
glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
wooden pluge with C.P. brass screws and washers.
59 Providing sock pit of 5.00 Cu.M. Volume including excavating andfilling 1.00 No. 3163.49
brickbats with dry masonry work at top for 45cm. heightincluding
covering the top with stone including providing vatas in C.M.1:3 with
finishing curing etc. complete as directed.
60 Painting lines, dashes, arrows, letters etc on roads, air fields, on walls 10.00 Sq.m. 123.13
and like in two coats with road marking paint, brushing including
cleaning the surface of all dirt, dust and other foreign matter. (i) Upto
10cm in width Page :
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
61 Excavation for foundation upto 1.5 m depth including sorting out and 60.73 Cum 261.73
stacking of useful materials and disposing off the excavated stuff upto
50 Meter lead. (B) Dense or Hard soil.
62 Provinding and laying controlled cement concrete M-250 and finishing 9.29 Cum 4433.90
smooth with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (A) Foundations,
footings, base of columns and mass concrete.
63 Clearing and grubbing road land including uprooting rank vegetation 0.008 Hect. 80243.75
grass bushes, shrubs, sapling and trees girth up to 300 mm removal of
stumps of trees cut earlier and disposal of unserviceable materials (A)
By manual means in area of light jungle.
64 Excavation for foundation depth from 1.5 m to 3.0 m including sorting 26.28 Cum 282.85
out and stacking of useful materials and disposing off the excavated
stuff upto 50 Meter lead. (B) Dense or Hard soil.
65 Providing and laying controlled cement concrete M.200 and curing 7.05 Cum 4612.67
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and
Cantilever upto floor two level.(For Grade slab)
66 Providing and laying controlled c.c.M.200 & curing complete including 6.89 Cum 6216.55
the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Beam upto floor two level.
67 Providing and laying controlled c.c.M.200 & curing complete including 9.80 Cum 6309.47
the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Slabs,landing,cantilevers upto floor two
68 Provinding and laying controlled cement concrete M -250 and 4.73 Cum 5746.90
finishing smooth with curing etc complete, including the cost of
formwork but excluding the cost of reinforcement for R.C.C. work
in(A) plinth Beam.
20cm. thickness including watering, ramming and consolidating etc.
70 Filling available excavated earth (Excluding rock) in trenches plinth, 54.04 Cum 130.39
sides of foundation etc in layers not exceeding 20 cm in depth
consolidating each deposited layer by ramming and watering.
71 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse 2.03 Cum 3925.77
sand : 6- crushed stone aggregates 20 mm nominal size) and curing
complete including cost of formwork in (A) Wall Caps / Coping
72 Providing 20mm thick sand faced cement plaster on walls upto height 102.57 Sq.m. 329.29
10 metres above ground level consisting of 12mm thick backing coat
of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.
1:1 (1-cement : 1-sand) etc. complete.
73 Providing 15mm thick cement plaster in single coat on Rough 117.66 Sq.m. 167.03
(Similar)side of single or half brick walls for interior plastering upto floor
two level and finished even and smooth in (ii) Cement mortar 1:4 (1-
cement :4-sand) (Interior Plaster)
74 Providing 15 mm thick cement plaster in single coat on brick/concrete 61.71 Sq.m. 55.87
walls for interior plastering upto floor two level and finished even and
smooth in (i)Cement mortar 1:4 (1-cement:4-sand) (ceiling Plaster)
75 Providing and laying controlled cement concrete M.250 and curing 4.05 Cum 8581.97
complete including the cost of formwork and Excluding the cost fo
reinforcement for reinforced concrete work in (D) Columns, Pillars
posts and struts, upto floor two level.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
76 Brick work using common burnt clay building bricks having crushing 9.26 Cum 4289.33
strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional
77 Providing and laying burnt brick masonary for super structure with 9.97 Cum 4320.08
ordinary portland cement mortar 1:5 proportion including providing
scaffolding racking out joints curing etc. complete for all leads and lifts.
(Conventional Bricks) upto floor two level.
78 Providing 20 mm thick sand faced cement plaster with Gutka on walls 142.00 Sq.m. 329.29
upto height 10 meters above ground level consisting of 12mm thick
backing coat of C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing
coat of C.M. 1:1 (1 cement :1 sand) etc. complete including painting
with two coats of water proof acrylic emulsion paint to give an even
79 Providing and laying and fixing 50 mm thick expansion joint by hydro 3.38 Sq.m. 1491.03
cell semi rigid UV resistance with high performance laminated closed
cell polythene foam joint filler in sheet foam as directed etc. complete.
Total Rs.
i.e. Rs. Thirty Three lacs Ninety Four thousand Nine hundred Sixty and Twelve paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ___________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:
PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.
items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by
me and found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division,
Halol Panchayat (R & B) Division,
Godhra Godhra
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
02 All GR in one_For Non BT Work.pdf
BOQ Pkg-43-Repairing Pashudawakhana Halol.pdf
GR 07 Performance Bond and Bitumen date 4-5-26.pdf
Pkg-43-Repairing Pashudawakhana Halol.pdf
SBD Pkg-43-Repairing Pashudawakhana Halol.pdf
Specifications Pkg 43 Pashudawakhana Halol.pdf
Download all tender documents and submit your bid