Construction of New Godown 2000 MT Capacity in Existing Godown Campus at Savagadh, Ta. Idar, Dist- Sabarkantha

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 738.00 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

2 Excavation for foundation for depth from 1.5 m to 3.0 m 386.00 Cum 170.40

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

3 Filling in plinth with sand under floors including watering 174.00 Cum 481.81

ramming, consolidating and dressing complete

4 Filling in foundation and plinth with murrum or selected 839.00 Cum 294.39

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

5 Providing and laying controlled cement concrete M.150 for 298.00 Cum 4210.69

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings,Base of columns and Mass

6 Providing and laying controlled cement concrete M.250 and 695.00 Cum 4529.75

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns and Mass

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

7 Providing and laying controlled cement concrete M250 and 35.00 Cum 7522.48

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

8 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 39.00 Cum 2806.59

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

9 Providing and laying controlled cement concrete M.250 and 112.00 Cum 5802.45

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

10 Brick work using common burnt clay building bricks having 100.10 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

11 Providing and laying controlled cement concrete M.200 and 58.00 Cum 7490.90

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

12 Providing and laying controlled cement concrete M.200 and 51.00 Cum 5496.26

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

13 Providing and laying controlled cement concrete M.200 and 182.00 Cum 6379.81

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

14 Providing and laying cement concrete pavement (25mm to 23.00 Cum 4521.15

50mm thick) with 1:2:4 (1-cement : 2-coarse sand : 4-stone

aggregate 20mm nominal size) including finishing with

floating coat of neat cement complete.

15 Providing and laying controlled cement concrete M.200 and 6.00 Cum 6359.35

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

16 Providing and laying controlled cement concrete M.200 and 10.00 Cum 6949.03

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

17 Providing TMT Bar FE 500D reinforcement for R.C.C. 87970.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

18 Providing throating or plaster drip and moulding to R.C.C. 135.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

19 Brick work using Common Burnt Clay building bricks 234.00 Cum 4495.99

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

20 Providing & Fixing Chicken mesh for joint between brick 150.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

21 Providing 15mm thick cement mala plaster in single coat on 1158.00 Sqmt 241.38

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

22 Providing 10mm thick cement mala plaster in single coat on 128.00 Sqmt 215.30

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

23 20mm thick sand faced cement plaster with Gutka Finish on 1259.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

1-sand) with 5mm grooves, etc. complete.

24 Applying two coats of putty & two coats of primer of 772.00 Sqmt 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

25 Wall painting (three coats) with plastic emulsion paint of 670.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

26 Ceiling painting (three coats) with plastic emulsion paint of 102.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

27 Finishing wall with weather proof exterior emulsion paint 1573.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

28 Compaction and finishing of cement concrete road by 3275.00 Sqmt 72.72

trimix process providing extra labour charges for the trimix

vaccum dewatering service process on cement concrete road

surface by using vaccum dewatering pump floater surface

vibrator including making rough finish to surface as per in

including levelling the complete.

29 Providing and fixing Machine cut & Polished Blue Kota 42.00 Sqmt 1355.42

stone in 7.5 cm width Strip flooring for Ramp even grade

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A)

30 Providing and fixing Machine cut, Free edges, Mirror 14.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

31 Providing and fixing Machine cut, Free edges, Polished 84.00 Sqmt 2510.86

Green Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

32 Providing and laying water prooofing treatment with china 144.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

33 Providing and fixing rolling shutters of approved make 25.00 Sqmt 3554.40

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arragements for inside

and outside locking with push-pull operation including the

cost of hood cover and spring etc. complete.(A) Shutters

having width below 3.5 M.

34 Providing and fixing Grill Rolling shutters of approved 25.00 Sqmt 2829.01

make made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arragements for inside

and outside locking with push-pull operation including the

cost of hood cover and spring etc. complete.(A) Shutters

having width below 3.5 M.

35 Providing & fixing M.S. Grill using 16 mm dia. M.S. Bars 27.00 Sqmt 3268.36

@ 15 cm C/C fixed in frame using angle 35mm x 6mm,

35mm x 6mm flat in center, and Galvanized wire mesh jali

20mm x 20mm spacing, including red lead primer coat and

two coats of oil painting etc. complete.

36 Providing and fixing Glass bricks partition using glass brick 36.00 Sqmt 3061.31

of required design, type size of glass brick 19 cm x 19 cm x

10 cm cm fixing the same with 4 mm dia alluminium bar at

every 3rd layer with white cement etc complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

37 Providing, laying and jointing in true line and level 110 162.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

38 Applying general insecticide pest control treatment to 1263.00 Sqmt 80.62

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -

II( (0.075% concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

39 Providing corrugated G.I. sheet of class-3 roofing fixed with 731.00 Sqmt 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost

of purlins,Rafters and Trusses.(1) 0.80 mm thick sheet.

40 Steel work, welded in built up sections framed work 190.00 Quintal 9108.48

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

41 Painting two coats (excluding priming coat) on external 350.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

42 Providing and fixing Proflex type self supported roof (Arch 1356.30 Sqmt 4560.15

type) using Cold rolled, Galvalume Steel colour coated

sheet 1.2 mm thick confirming to ASTMA 653, A792 DIN,

Alu Zinc Coating : AZ150 and Regular modified polyester

painting with epoxy primer service coat at bottom,

including necessary fixtures & fastenings for lighting

arrangement and turbo ventilator with skylight.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

43 Providing and fixing Turbo Ventilators made from 9.00 Nos. 9211.20

Alluminum and stainless steel with Ploy Carbonate Sky

Light of size 2' x 7', including fixing in roof as and where

directed by engineer in charge etc. complete.

44 Providing and fixing Sign Board made of Blue-coloured 6.50 Sqmt 1956.90

background board of height 2'-0" (600mm) fabricated from

weather-resistant sheet/ACP of approved shade, fixed over

suitable frame, complete with Alluminium Letters in

Gujarati/English (as per approved font) of height 1'-

0"(300mm), cut from 16 swg aluminium sheet, machine cut

and finished with stove enamel paint/powder coating

45 Dismentaling of sheet roofing including ridges, Hips, 144.00 Sqmt 49.18

Valleys,Gutters etc. stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

46 Dismentling steel work including distempering and stacking 2501.00 Kg 3.81

the materials with all lead and lift.

47 Dismentling barbed wire in fencing including making rolls 119.00 Rmt 68.08

and also including dismentling fencing posts including all

earth work concrete in base and making good the disturbed

ground stacking useful materials as directed and disposing

as directed and disposing of the unserviceable materials

with all lead and lift.

48 Demolition including stacking of serviceable materilas and 28.00 Cum 1081.84

disposal of unserviceable materials with all lead and lift.

49 Filling available excavated earth (excluding rock) in 174.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

50 Providing and laying controlled cement concrete M.150 and 18.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

51 Providing & laying weep hole in Aburtments, and returns 595.00 Each 86.73

by using A.C. pipe of 100mm including laying in proper

grede and jointing the completed as per detailed

52 Providing and fixing Safety Grills of required pattern for 1635.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

53 Drilling of pilot bore hole of size 250/300 mm diameter at 275.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

54 Reaming of 250/300 mm diameter pilot bore hole to size 200.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

55 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

56 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

57 Supply of 200 mm diameter V-wire screen pipe of slot size 75.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

58 Supply of M.S. Bore clamps with 3 holes on either side 1.00 Pair 1753.36

with nuts and bolts of standard make and suitable size (g)

750 mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

59 Supply of Bore Plug having 100 mm height made from 1.00 Nos. 834.26

M.S. plate with 3 holes at equal distance on circumference

for nuts-bolts type, locking arrangement with nut-bolts &

lock nuts of standard make complete. (b) from 5 mm thick

M.S. plate (for top also) (ii) suitable for 200 mm dia. pipe.

60 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

61 Supply of Steel Bent plates suitable to ERW pipe for (b) 8.00 Nos. 71.71

200 mm diameter and 150 x 150 x 6 mm size etc. complete.

62 Supply of Gravel of size selected size up to 4mm to 6 mm, 12.00 Cmt 2295.73

including stacking and filing etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

63 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

64 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

65 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

66 Providing and erecting PVC corrugated Flexible conduit 175.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (3) 32 mm diameter

67 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

68 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON-OFF isolator (AC - 3/23 duty) main

fuses, single phasing preventer, indicating lamps for R-Y-B

phases, overload relay, automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start-stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L&T, Seimens or

BCH make only (a) DOL upto 7.50 H.P.

69 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 200.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

70 Providing laying and jointing in true line and level 50mm 150.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing butterfly valve of IS approved brand

71 Providing 2.00 Nos. 1595.80

72 Excavation for foundation for depth from 1.5 m to 3.0 m 15.00 Cum 287.47

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

73 Providing and laying controlled cement concrete M.200 and 19.00 Cum 4195.75

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns and Mass

74 Providing and laying coloured glazed tiles of the size 300 63.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

75 Providing and laying polished Kota stone slab flooring over 12.00 Sqmt 1019.00

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

76 Providing and fixing flush door with Single shutters, solid 3.00 Sqmt 4211.70

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, SS Stopper 20cm, SS Aldrop

30cm both side, anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board

core anodised alluminium butt hinges in flush door shutters

(2) 35 mm thick.

77 Providing and fixing window having extruded aluminum 3.00 Sqmt 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

78 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 6.00 Nos 958.17

size having weight not less than 35Kg.

79 Demolition of Brick work and stone masonry including 7.00 Cum 562.84

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

80 Box cutting the road surface to proper slope and camber for 1140.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

81 Construction of B.I.T.C. granular sub base by providing 570.00 Cum 996.12

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

82 Providing, laying, spreading and compacting stone 337.00 Cum 1336.05

aggregates of specific sizes to water bound macadam

(Grade-II) (B.T. Metal of size 45 to 63 mm) specification

including spreading in uniform thickness, hand packing,

rolling with 3 wheeled steel/ vibratory roller in stages to

proper grade and camber, applying and brooming requisite

type of screening/ binding Materials to fill up the interstices

of coarse aggregate, watering and compacting to the

required density.

83 Supplying and fixing reinforced concrete heavy duty non- 25.00 Rmt. 660.00

pressure pipes with collars for culverts carrying heavy

traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i)

84 Constructing Brick masonry road gully chamber 500mm x 10.00 Nos. 2017.20

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

85 Clearing and grubbing road land including uprooting rank 1.00 Hectare 28455.10

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

86 Excavation for foundation upto 1.5 m depth including 56.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

87 Earthwork for embankment including breaking clods, 658.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

88 Rolling and consolidation of soling including filling in 2110.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne.

89 Supplying of yellow or Goradu soil with all lead and lift 633.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

90 Bowling and developing flowering plants grown in nursery 15.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

91 Bowling and developing flowering plants grown in nursery 200.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

92 Bowling and developing flowering plants grown in nursery 200.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

93 Bowling and developing flowering plants grown in nursery 20.00 Nos. 303.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Borsali

94 Bowling and developing flowering plants grown in nursery 20.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

95 Bowling and developing flowering plants grown in nursery 20.00 Nos. 202.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Neem

96 Bowling and developing flowering plants grown in nursery 80.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

97 Bowling and developing flowering plants grown in nursery 15.00 Nos. 303.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Terminalia Plant

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

98 Bowling and developing flowering plants grown in nursery 20.00 Nos. 252.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Champak

99 Bowling and developing flowering plants grown in nursery 15.00 Nos. 353.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Royal Palm

100 Bowling and developing flowering plants grown in nursery 15.00 Nos. 454.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Foxtail Palm

101 Labour charges for planting various plantsafler proper anti- 620.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

102 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

103 Providing erecting and fixing double coated ISI water tank 1000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

104 Providing laying and jointing in true line and level 40mm 100.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

105 Providing laying and jointing in true line and level 15mm 80.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

106 Providing and fixing brass screw down stop cock (A) 15 10.00 Nos. 205.83

107 Rubber Hose Pipe 15 mm dia of approved brand and make 600.00 Rmt 90.90

108 Providing and fixing G.I. Nipple as directed 20.00 Nos. 50.50

109 Providing & Laying Rain Water Junction Chamber of Clear 2.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

110 Providing & Laying Filter chamber of brickwork 0.23 thick 2.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

111 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

112 II) Fire Extinguisher and Exit Signages Supply, 10.00 Nos. 6447.84

installlation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683,

with ISI marked / TAC approved fitted with required

accessories including wall suspension brakets.

113 Supply, Installation, Testing & Commisioning of ABC type 10.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

114 Excavation for foundation upto 1.5 m depth including 20.00 Cum 272.57

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

115 Excavation for foundation for depth from 1.5 m to 3.0 m 7.00 Cum 498.93

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

116 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 2.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

117 Half brick masonry in common brunt clay building bricks 8.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

118 Providing and laying cement concrete flooring 1:2:4 (1- 10.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

119 Providing 15mm thick cement plaster in single coat on 88.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

120 Providing and Laying ordinary cement concrete 1:2:4 (1- 4.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

121 Providing and laying (to level or slopes) and jointing with 10.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

122 Providing and Constructing sock pit of 3.46 mt. dia outside 2.00 Nos 35192.44

and 6 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

123 Providing and fixing pre-cast Rubber Dye / steel Dye inter 538.00 Sqmt. 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

124 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 15.00 Pts 582.77

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III (Make:- Anchor,

Indoasian, L&T / LK, Great-white )

125 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 5.00 Pts 809.01

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed..(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete.Cat-III (Make:- Anchor, Indoasian, L&T / LK,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

126 Point wiring for Individual Plug with & earth wire of 1.5 5.00 Pts 612.06

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete Cat-III (Make:- Anchor, Indoasian, L&T / LK,

127 Point wiring for on board Looped Plug with 6A Modular 10.00 Pts 309.06

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories.Cat-III

(Make:- Anchor, Indoasian, L&T / LK, Great-white )

128 Providing following type of Modular Type Accessories 4.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket[A] For One Gang Cat.III

(Make:- Anchor, Indoasian, L&T / LK, Great-white )

129 Providing following type of Modular Type Accessories 10.00 Nos. 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (7) Blank Plate

Single Cat.III (Make:- Anchor, Indoasian, L&T / LK,

130 Providing following type of Modular Type Accessories 6.00 Nos. 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (9) 16 Amp.

SP one way switch Cat-III (Make:- Anchor, Indoasian,

L&T / LK, Great-white )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

131 Providing following type of Modular Type Accessories 6.00 Nos. 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat-III (Make:- Anchor, Indoasian,

L&T / LK, Great-white )

132 Providing and erecting ISI mark Medium class RIGID PVC 230.00 Mtrs. 33.33

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (b)

133 Providing and erecting ISI mark Medium class RIGID PVC 60.00 Mtrs. 54.54

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (c)

134 Providing & erecting PVC Corrugated Flexible Conduit 55.00 Mtrs. 21.21

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (2) 25 mm

135 Providing & erecting PVC Corrugated Flexible Conduit 35.00 Mtrs. 27.27

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (3) 32 mm

136 Supplying and laying UPVC cable trunking system 20.00 Mtrs. 428.24

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes (2) 100 mm x 50 mm trunking

137 Providing and erecting Mains with 1.1 KV grade FRLS 755.00 Mtrs. 78.78

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (a) 2 wire 1.5 sq. mm (Make:-

Finolex, KEI, RR, Avocab)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

138 Providing and erecting Mains with 1.1 KV grade FRLS 489.00 Mtrs. 104.03

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories(b) 2 wire 2.5 sq. mm (Make:-

Finolex, KEI, RR, Avocab)

139 Providing and erecting Mains with 1.1 KV grade FRLS 240.00 Mtrs. 326.23

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessorie (H) 4 wire 6 sq. mm (Make:- Finolex, KEI, RR,

140 Providing and erecting Mains with 1.1 KV grade FRLS 260.00 Mtrs. 532.27

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessorie (I) 4 wire 10 sq. mm (Make:- Finolex, KEI,

141 providing and erecting Mains with ISI marked, 1.5KV grade 61.00 Mtrs. 115.14

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

142 providing and erecting Mains with ISI marked, 1.5KV grade 22.00 Mtrs. 588.83

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (j) One wire 50.00 sq. mm

143 Supplying and erecting Flexible PVC insulated multi strand 234.00 Mtrs. 58.58

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

144 Supplying & erecting approved make Telephone Cable 160.00 Mtrs. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a) Unarmoured 2)

145 Supplying & erecting approved make Telephone Cable 60.00 Mtrs. 125.24

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (b) Armoured

[Jelly Filled](1) Ten Pairs

146 Supplying & erecting M.S. Box having 16 Gauge painted 4.00 Nos. 88.88

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size. (c) 200 mm x

147 Providing & erecting Switch board for Computer or 4.00 Nos. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-

III (Make:- Anchor, Indoasian, L&T / LK, Great-white )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

148 Supplying and erecting LED indoor fittings with LEDs of 10.00 Nos. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A) Tube Light

with integral/ non-integral driver .(iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat III (Make:-

Wipro,Havells, Philiphs,LT )

149 Supplying and erecting LED street light / Flood light 25.00 Nos. 2843.15

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (i) above

36 to 47 watts Cat-III (Make:- Wipro,Havells, Philiphs,LT

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

150 Supplying and erecting LED street light / Flood light 28.00 Nos. 5175.24

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(B) Flood Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.(iii)

Above 60 to 89 watts Cat-III (Make:- Wipro,Havells,

151 Supplying and erecting LED street light / Flood light 12.00 Nos. 9196.05

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(B) Flood Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (vI)

above 200 to 250 watts Cat-III (Make:- Wipro,Havells,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

152 Supplying and erecting LED street light / Flood light 2.00 Nos. 4096.56

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (C) Post Top Lantern

LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (ii)32-40W Cat-III (Make:-

Wipro,Havells, Philiphs,LT )

153 Providing and erecting Approved make Four pole moulded 21.00 Nos. 6790.23

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

154 Providing and erecting Approved make Four pole moulded 5.00 Nos. 8861.74

case circuit breaker having breaking capacity ICU of

KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

155 Providing and erecting Approved make Four pole moulded 1.00 Nos. 23041.13

case circuit breaker having breaking capacity ICU of

KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

156 Supplying and erecting triple pole & neutral 440V / 500V 5.00 Rn.Mtrs 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

157 Supplying and erecting triple pole & neutral 440V / 500V 2.00 Rn.Mtrs 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(B) Suitable for 200 Amp. capacity

158 providing and erecting Miniature circuit breaker single pole 39.00 Nos. 297.95

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III (Make:- Indoasian, L&T (LK), ABB,

159 Providing and erecting Miniature circuit breaker single pole 80.00 Nos. 123.22

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat-III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

160 Providing & erecting 240 V MCB double pole switch for 12.00 Nos. 325.22

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

161 Providing & erecting 415 V MCB Four Pole for Motor & 8.00 Nos. 811.03

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (B.) for 63 Amp. Cat-III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

162 Providing and erecting Sheet Steel powder coated MCB 5.00 Nos. 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet

steel double door (IP-43) (iv)12 way (Make:- Indoasian,

L&T (LK), ABB, Schneider)

163 Providing and erecting Sheet Steel powder coated MCB 4.00 Nos. 3412.79

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for(B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)8

way (Make:- Indoasian, L&T (LK), ABB, Schneider)

164 Providing and erecting Approved make RCCBs conforming 13.00 Nos. 2456.32

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (iI) 40 Amps.DP Cat. III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

165 Providing and erecting metallic vitrified danger notice 3.00 Nos. 69.69

board as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

166 Providing and erecting Annealed bare Copper wire 8 to 16 20.00 Kgs. 794.87

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

167 Providing and erecting Pipe type earthing having 150 25.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

168 For using salt and charcoal / coke as required for pipe type 25.00 Nos. 171.70

169 Supplying & erecting earth pit of minimum bore dia.150mm 6.00 Nos. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

170 Providing & erecting weather proof, dust & vermin proof, 5.00 Sq.Mtrs. 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions

& cable alley as per requirements & instruction of engineer-

in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (B) The standard

companies switch gear shall be used and only manufacturers

at CPRI approved factory (i) with 350mm depth

171 Providing , erecting , fabricating the M.S. structure as per 120.00 Kgs. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted

with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

172 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 740.00 Mtrs. 264.62

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core) (Make:- Finolex, KEI, RR, Avocab)

173 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 460.00 Mtrs. 589.84

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (E) 3 1/2 core 95 Sq. mm

( 50 Sq. mm 1/2 core) (Make:- Finolex, KEI, RR, Avocab)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

174 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 190.00 Mtrs. 1085.75

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (H) 3 1/2 core 185 Sq. mm

( 95 Sq. mm 1/2 core) (Make:- Finolex, KEI, RR,

175 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 1210.00 Mtrs. 151.50

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (b) 4 core 6 Sq.

mm (Make:- Finolex, KEI, RR, Avocab)

176 Making trench in soft soil of suitable width of 90 cm deep 1210.00 Mtrs. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

177 Making trench in Hard Murrum / Tar Road of suitable 440.00 Mtrs. 74.74

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

178 Making trench in Hard Murrum / Tar Road of suitable 242.00 Mtrs. 357.54

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground. (B) If

additional machinery like hammer driller or JCB use [Add]

179 Providing & laying. R.C.C. Hume pipe for cable to be laid 196.00 Mtrs. 263.61

90 cm. below ground across the road crossing or on floor

with necessary material in an approved manner and making

the ground as per original. (E)150 mm dia

180 Providing & laying approved make Double walled 1351.00 Mtrs. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer Dia

181 Providing & laying approved make Double walled 263.00 Mtrs. 137.36

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (D)

120 mm Outer Dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

182 Providing & laying approved make ISI marked Rigid PVC 30.00 Mtrs. 236.34

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr. (F)

mm inner Dia. (11.63 Kg/6 RMT)

183 Providing and, fixing heavy duty flange type brass cable 78.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(b) 2 to 4 core 6 Sq. mm

184 Providing and, fixing heavy duty flange type brass double 4.00 Nos. 66.66

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

185 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 135.34

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (D) 3 & 1/2

186 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 219.17

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (G) 3 & 1/2

core 185 Sq. mm

187 Solder less crimping type Aluminium lugs conforming to IS 312.00 Nos. 6.06

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

188 Solder less crimping type Aluminium lugs conforming to IS 16.00 Nos. 20.20

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

189 Solder less crimping type Aluminium lugs conforming to IS 8.00 Nos. 40.40

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (F)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

190 Solder less crimping type Aluminium lugs conforming to IS 8.00 Nos. 80.80

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. ( I )

191 Providing and erecting Approved make Ceiling fan with 5.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] ] (Make:- Crompton,Orient )

192 Supplying and erecting 19 / 20 mm. nominal bore Medium 5.00 Mtrs. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

193 Supplying & erecting fan hook box of 10 mm M.S. round 5.00 Nos. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

194 Supplying & erecting single phase approved make industrial 5.00 Nos. 3339.06

exhaust fan suitable for medium duty ring mounted low

noise operation suitable for medium duty having following

dia size and maximum speed in RPM [D] 450 mm dia

RPM Cat.II ] (Make:- Crompton,Orient )

195 Supplying and erecting approved make Octagonal pole 25.00 Nos. 9011.22

made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 59 kg

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

196 Supplying & erecting approved make SMC press moulded 2.00 Nos. 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (b)

250mm x 200mm x 100mm [deep]

197 Providing street light pole bracket comprising main B Class 25.00 Nos. 561.56

MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fastners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple

with check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket

198 Supplying & erecting approved make Digital time switch 2.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

199 Supplying & erecting power contactor ,AC3 duty for time 2.00 Nos. 2782.55

switch complete erected as per direction Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider) [D] 4 pole 440V

200 Providing and erecting water cooler having storage capacity 1.00 Nos. 54515.76

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚ C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel. ◦ (Make:-Voltas, Blue star)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

201 Supplying & erecting 5 stage single reverse osmosis water 1.00 Nos. 15620.66

purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi,

mention with 40 psi inline type post carbon filter auto low

& high pressure switches with following size of storage

tank & LPH capacity & erected as directed [B] 25 Ltr / Hr

with 30 Ltr. Storage Tank

202 Supplying and erecting approved make panel mounting type 3.00 Nos. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to

AC Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

203 Supplying and erecting approved make panel mounting type 3.00 Nos. 1558.43

Digital Ammeter having 3 digits LED display, external

CT operated, calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing panel board

with all connection, wiring etc .with manufacturers

calibration certificate.

204 Providing & erecting L.T. Current Transformer with bar 9.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

205 Supplying and erecting approved make suitable panel 9.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

206 Providing & erecting open well horizontal mono block 2.00 Nos. 17279.08

pump set with cast iron body, complete for three phase

submersible motor having[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

207 Supplying & erecting approved make motor control 2.00 Nos. 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y -

B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start - stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or

BCH make only.(A) DOL up to 5.0 H.P.

208 Providing and erecting ISI marked PVC insulated PVC 120.00 Mtrs. 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

209 Providing Water proof straight Joint in PVC insulated flat 2.00 Nos. 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

210 Supplying of following size of HEAVY UPVC column 60.00 Rmts. 359.56

pipe with coupler and wire lock [B] 50 mm dia

211 Supplying, & erecting C.I. swing, check type non-return 2.00 Nos. 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

212 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary

plumbing as desired.[D] 50 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

213 Supplying & erecting D.C.P. type fire extinguisher for 3.00 Nos. 1712.96

following capacity cartridge type with gun metal cap

gram CO2 gas cartridge, powder and brackets confirming to

IS 2171 1985 and complete erected with necessary clamps

made from 50 x 6 mm M S Flat with nuts and bolts grouted

in wall complete. [A] For 5 Kg Capacity

214 Supplying & erecting D.C.P. type fire extinguisher for 2.00 Nos. 2226.04

following capacity cartridge type with gun metal cap

gram CO2 gas cartridge, powder and brackets confirming to

IS 2171 1985 and complete erected with necessary clamps

made from 50 x 6 mm M S Flat with nuts and bolts grouted

in wall complete. [B] For 10 KG Capacity

215 Supplying & erecting carbon dioxide (CO2) fire 3.00 Nos. 6591.26

extinguisher user of following capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [A] For 4.5 Kg Capacity

216 Supplying & erecting carbon dioxide (CO2) fire 1.00 Nos. 8671.86

extinguisher user of following capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

217 Supply, Installation, Testing & Commissioning of following size of Grid Tied 17.00 KW 42455.35

Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence test

to ensure error free Modules, Thep. temp. co-efficient of the PV module shall

equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor

75% to be used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear Power Warranty

includes all mechanical and electrical parameters of the Solar panel. Modules

must be complied to the DCR(Domestic content requirements). The Ration of

AC to DC is 5:6 for the Installation capacity which are given in AC KW. Solar

Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C,

Integrated protection of Inverter are Anti-islanding Protection, Input Reverse

Polarity Protection, Insulation Resistor Detection, Ground fault protection,

Residual Current Monitoring Unit, Output Over Current Protection, Output

Short Circuit Protection, Output Over Voltage Protection, PV array string fault

Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi. Integrated, Input Reverse Polarity Protection

Integrated, Insulation Resistor Detection Integrated, Residual Current

Monitoring Unit Integrated, Output Over Current Protection Integrated, Output

Short Circuit Protection Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi-Fi, Module Mounting Structure: The mounting

(Rectangular pipe / square pipe / circular pipe) with requisite cross bars, nuts

and bolts, etc. shall be Hot deep galvanized with minimum 80micron coating.

The Rectangular / square /circular hollow pipe section used for the structure

should have a minimum thickness of 2.0 mm. other than above, the material

thickness should be minimum 2.5 mm. A certificate of a structural engineer

certifying the strength and stability of the mounting structure to withstand the

weight and wind speed of 150 km/hour throughout the life span of 25 years of

the system, shall be submitted by the vendors. Hot Dipped Galvanized steel

coils. suitable arrangement for base plate for foundation , solar panel mounting,

the structure should be suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j bolt, anchor fastner

etc. the nut bolt used for installtion of stucture should be (SS 304) quality.The

ground clearance of the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility requirement. a. Column

–The minimum section (thickness) should be 60MM*40MM b.

Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section

thickness should be minimum 2.5 mm. A certificate of a structural engineer

certifying the strength and stability of the mounting structure to withstand the Estimated

weight and wind speed of 150 km/hour throughout the life span of 25 years of Rates Total Amount

weight and wind speed of 150 km/hour throughout the life span of 25 years of Rates Total Amount

the system, shall be submittedItem

by theofvendors.

work Hot Dipped Galvanized steel Quantity Unit

No. In figure to estimated

coils. suitable arrangement for base plate for foundation , solar panel mounting, quantities

the structure should be suitable for carry the load of solar panel,wiring, sprinkler

1 system etc. with necessary foundation

work/wall mount, j bolt, anchor fastner 3 4 5

etc. the nut bolt used for installtion of stucture should be (SS 304) quality.The

ground clearance of the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility requirement. a. Column

–The minimum section (thickness) should be 60MM*40MM b.

Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section

(thickness) should be 40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB & DCDB), inter connecting

wiring, earthing system as per the CEIG drawing approval, lightining arrester

system as per the CEIG drawing approval, all liasoning work with various gov.

dipartment like state nodal agency,DISCOM & CEIG is included in agency

scope (Excluding All charges namely GEDA Application fees, Solar

connectivity Charges, Meter connectivity Charges, Meter testing Charges and

system stability/strenthning charges.) (C ) Grid Tied Solar Power System: 11 -

25 kW (3 - phase)

218 Supplying, erecting, testing, commissioning approved make 2.00 Nos. 162858.46

M.S. Polygonal High Mast Pole having following general

(a) Polygonal Section fabricated from M.S. Plate confirms

BSEN 10025 & Hot deep galvanized minimum 65/86

micron (as per IS 2629 /1985) Lantern carriage with ring

and rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia

S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No.

Lightening arrestor = 1 No. with necessary wiring of

sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible

motor and switchgears having door not more than 1400mm

x 300mm with waterproof gasket & hinges & locking

(f) Pole structure comprises suitable size of reversible

motor, cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness

supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS

including testing & commissioning of the entire structure

for following size of High Mast poles [1] High Mast

motor and switchgears having door not more than 1400mm

x 300mm with waterproof gasket & hinges & locking Estimated

arrangement. Rates Total Amount

arrangement. Rates Total Amount

Item of work Quantity Unit

No. (f) Pole structure comprises suitable size of reversible In figure to estimated

motor, cable and necessary switchgears with control panel. quantities

1 (g) bottom section shall have

2 suitable size of thickness 3 4 5

supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS

including testing & commissioning of the entire structure

for following size of High Mast poles [1] High Mast

Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec.

No. - 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia

520 mm x 20 mm thick, Foundation Bolt Size M24 x

mm, Qty - 6 Nos., Suitable for mounting Fitting of Light -

Total Cost of Construction Cost

(Rupees Three Crore Fifty Three lakh Sixty Two Thousand Nine Hundred Thirty Four and Fifty Two Paise Only)

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…35362934.52 Put to tender Rs.35362934.52

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs. -1,14,938.00 must be recovered from Contractor's

respective R.A. Bill.

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division

Idar Himatnagar