Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | ₹9.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹9.9 L+₹20,395 (2.10%)Rejected-AOC CHAMPAKNAGAR JIRANIA 799003 | JIRANIA | WEST TRIPURA | TRIPURA | 799003 | ₹9.9 L+₹20,395 (2.10%) | L2 | Rejected-AOC L2 |
Tender Value
₹9.7 L
EMD Value
₹19,424
Closing Date
22 Jun 2026, 3:00 pmClosed
O/O the Executive Engineer, Div-III, AMC
Executive Engineer, Div-III, AMC
Construction of Open GYM at A.D Nagar play ground near ward office, under ward No 39AMC.
2026_SAMC_73774_1
11/EE/Div-III/AMC/2026-27
Open Tender
Civil Works
Percentage
Under ward No 39 AMC.
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
Yes
₹19,424
Yes
18 Sept 2026
16 Jun 2026
22 Jun 2026
16 Jun 2026
22 Jun 2026
16 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil | - | cum | 1 | - |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | - | cum | 1 | - |
| 3 | Providing and laying dry flat brick flooring in required pattern complete. | - | sqm | - | - |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: -1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) | - | cum | - | - |
| 5 | First class brick work in foundation and plinth
including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 0.8 | cum | - | - |
| 6 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film
of 25 microns minimum to avoid scratches while
transportation and should be supplied in single
length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x 55mm) with EPDM
washers filled with white lead complete upto any
pitch in horizontal/ vertical or curved surfaces
excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge. | 1 | sqm | - | - |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate
20 mm nominal size) | 0.8 | cum | - | - |
| 8 | Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | - | kg | 1 | - |
| 9 | Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality
polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet
shall be fixed using self drilling /self tapping screws
with EPDM washers complete for
Ridges/Valley/Gutter/Flashing of width 610mm: | - | mtr | 1 | - |
| 10 | Providing and laying in position specified grade of
reinforced cement concrete excluding the cost of
centring, shuttering, finishing and reinforcement-
-All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size) | 0.4 | cum | 1 | ₹0.4 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_75078.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.35 MB
DNIT.pdf
Tender Documents • 4.09 MB
BOQ_75078.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .