80/24 construction,improvement and extension various of water supply schemes

Amount

SITC of 100 HP motor pump set and Electrification

OD375466/2023-2024:Supply, conveyance, installation, testing and commissioning of 100HP Motor pump-set consisting Horizontal Centrifugal Multistage pump model Flowmore make model M590L-BD-150X100/3 stage , pump size 150x100 mm, Cast Iron construction with CI impeller , EN-8 shaft, EN-9 /GM Sleeve capable of discharging 40 Lps against total head of 108 mtrs with an efficiency of 76 % directly coupled with100 HP squirrel cage induction motor 1480 RPM ,TEFC, IE2 motor , 3 phase , 415 V, 50 Hz AC supply , mounted on common base plate, flexible coupling with coupling pulley, bolts & nut, foundation bolts and nuts, coupling guard etc. from the original manufacturer ( Flowmore / Kirloskar or equivalent make ) on existing cc foundation.

OD377721/2023-2024:Supply, conveying & fixing 200 mm dia ISI marked Tata / Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends of every 2 mtr or nearest long , including conveyance charges to pump house and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

OD378128/2023-2024:Supply, conveying & fixing 150 mm dia ISI marked Tata/ Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends of every 2 mtr or nearest long , including conveyance charges to pumphouse and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc. complete.

OD378129/2023-2024:Supply, conveying & fixing 0.60 mtr or nearest long MS Bend consisting 200 mm dia ISI marked Tata / Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends including conveyance charges to pump house and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc. complete

OD378178/2023-2024:Supply, conveying & fixing 0.60mtr or nearest long MS Bend consisting 150 mm dia ISI marked Tata/ Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends including conveyance charges to pumphouse and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

OD376518/2023-2024:Supply, conveying & fixing 0.60mtr or nearest long MS Bend consisting 100 mm dia ISI marked Tata/ Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends including conveyance charges to pumphouse and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

OD378145/2023-2024:Supply, conveying & fixing 0.30 mtr or nearest long 200 x 150mm or nearest size MS Reducer consisting 200 mm dia ISI marked Tata / Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends including conveyance charges to pump house and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

OD378191/2023-2024:Supply, conveying & fixing 0.30 mtr or nearest long 150 x 100 mm or nearest size MS Reducer consisting 150 mm dia ISI marked Tata/ Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing MS flanges having 12 mm thickness and minimum 75 mm depth on both ends including conveyance charges to pumphouse and labor charges for loading, unloading, fixing on alignment for suction/delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

OD378179/2023-2024:Supply, conveying & fixing 0.30 mtr or nearest long 150 x 200 x 200 mm or nearest size MS Y joint consisting 200 & 150 mm dia ISI marked Tata/ Jindal /equivalent make MS pipe having sheet thickness 6.35 mm and cutting in to required length, facing the cutting edges and supply and providing suitable 3 nos MS flanges having 12 mm thickness and minimum 75 mm depth on both ends including conveyance charges to pumphouse and labor charges for loading, unloading, fixing on alignment for delivery side pipe using suitable rubber packing etc. painting with two coats of synthetic enamel paint over a coat of red oxide primmer etc complete.

OD375465/2023-2024:Supply, conveyance and erection of 200 mm ISI marked Cast Iron flanged type Rising spindle Sluice valve as per IS: 14846 PN 1.6 with CI body and SS spindle and fixing the same in position using necessary rubber packing ,bolt nut and washer etc.

OD374259/2023-2024:Supply, conveyance and erection of 150 mm ISI marked Cast Iron flanged type Rising spindle Sluice valve as per IS: 14846 PN 1.6 with CI body and SS spindle and fixing the same in position using necessary rubber packing ,bolt nut and washer etc.

OD375464/2023-2024:Supply, conveyance and erection of 200 mm ISI marked Cast Iron flanged type Check Valve / Non Return valve as per IS: 5312 PN 1.6 with CI body , CI door with SS hinge pin, bronze seating ring , natural rubber door face and gaskets etc. and fixing the same in position using necessary rubber packing ,bolt nut and washer etc.

OD375554/2023-2024:Supply, conveyance and erection of 150 mm ISI marked Cast Iron flanged type Check Valve / Non Return valve as per IS: 5312 PN 1.6 with CI body , CI door with SS hinge pin, bronze seating ring , natural rubber door face and gaskets etc. and fixing the same in position using necessary rubber packing ,bolt nut and washer etc.

OD374262/2023-2024:S&F 25mm Gun metal full way wheel valve .

OD378335/2023-2024:S&F 40mm Gun metal full way wheel valve .

OD378334/2023-2024:S&F 40 mm medium class GI Pipe with GI specials such as coupler, union ,bend & T etc. for connection to the Vacuum pump set .

OD374263/2023-2024:S&F 25 mm medium class GI Pipe with GI specials such as coupler, union ,bend & T etc. for connection to the Vacuum pump set .

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

OD374265/2023-2024:Charges for chipping the existing RCC slab using suitable Jacky hammer/ breaker including all hire and labor charges of tools and plants including suitable capacity Diesel generator set with fuel etc. complete

OD374264/2023-2024:Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel .

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD374266/2023-2024:Supply and providing metallic support for suction/delivery side MS/GI pipe using suitable Channel/ Angle/ flat / square or rectangular pipe welded together and painting two coats of synthetic enamel paint over a coat of red oxide primer .

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point

90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps

90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD374267/2023-2024:Supply and fixing 10W Integral type Bulk head fixture on wall/ceiling and giving connections

OD374268/2023-2024:Supply and providing 9 w LED Bulb on existing batten/Bulk head/ pendent Light

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.5:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.30:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

OD375461/2023-2024:Supply and drawing 1100 V grade HRFR PVC insulated stranded single core copper conductor industrial cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.120.00 sq.mm 3 Run

90.12.7.35:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm

9.1.29:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

90.14.28.2:S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

OD376531/2023-2024:Supply and providing Auto Transformer Starter suitable for 100 HP squirrel cage induction motor including floor /wall mounting stand , required level good quality transformer oil , over load relay, single phasing preventer etc. complete and giving connections . make Protex or equivalent make

90.14.24.17:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.14.24.26:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.20 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.7:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required7.10 mm copper conductor ( 2 SWG)

90.16.3.9:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.2.3:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.7:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.7.10 mm (2 SWG)

OD374270/2023-2024:Supply and fixing 25x6 mm brass bolt, nut and washer

OD374271/2023-2024:Supply and fixing 12x3 mm brass bolt, nut and washer

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

90.12.24.2:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.4 sq mm

90.12.24.3:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.6 Sq mm

90.12.24.4:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm

90.12.24.11:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.120 sq mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

90.14.10.15:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

OD376647/2023-2024:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.250 Amp TP&N

90.14.11.2:MCCB AccessoriesSupply and fixing one number earth fault Relay up to 125A to 200A with CBCT.

90.14.11.15:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

90.14.11.12:MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.

90.14.11.11:MCCB AccessoriesSupply and fixing one number under voltage release for all voltage range up to 630A MCCB.

OD376777/2023-2024:Supply and fixing copper spreader terminal suitable for 315 / 400 A MCCB

OD376821/2023-2024:Supply and fixing Resin cast 200/5 A , 5VA , 1 accuracy class metering CT on existing board and giving connections.

OD376860/2023-2024:Supply and fixing kastel type interlock kit for 250A TPN SDF including 2 lock with one Key

OD374273/2023-2024:S& F Three phase multi function meters to read V, A ,F and PF accuracy class 1 on existing panel and giving connections. L & T make Cat. No: WL 4110 OOOO or equivalent make .

OD374274/2023-2024:S & F LED phase indicators for all voltage ranges - Red or Yellow Color

OD374275/2023-2024:S & F LED phase indicators for all voltage ranges - Blue Color

OD374276/2023-2024:Supply and fixing 20 A Fuse unit with HRC link on existing board using suitable bolt , nut and giving connections

OD374279/2023-2024:S & F Enameled Danger Notice Board of size 250 x 200 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red color.

OD374280/2023-2024:Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm, 4 cm or 5 cm height

OD374281/2023-2024:Supply and providing First Aid Chart ( Shock Treatment Chart ) PVC laminated /duly framed and placed in a conspicuous location for clear vision.

OD374282/2023-2024:Supply and providing 2 mm thick Elastomeric fire retardant insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength.

OD374283/2023-2024:Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.

OD374284/2023-2024:Supply and providing 6 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

OD374285/2023-2024:Supply and fixing Hot press molded SMC meter box size 810x350x230 mm Sintex make GS-MB- 8135 or equivalent make

OD376822/2023-2024:Supply and fixing 100 A 2 way neutral link on SMC or DMC base and giving connections

OD376823/2023-2024:Supply and fixing 400 A Fuse unit with HRC link on existing board using suitable bolt , nut and giving connections

GK INDUSTRIES

Bidder Name

GK INDUSTRIES

JOSE P C