SPECIAL REPAIRS TO OFFICERS MESS (MAIN BUILDING) OF SIKH LI AT BINNAGURI MILITARY STATION UNDER GE (NORTH) BINNAGURI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match complete all as specified and as directed.

S&F for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 1.00 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting, dados etc complete all as specified and as directed.

M&L for DIGITAL ELEVATION TILES of size 300x450 x 7-8mm/300x600x7-8mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles dark shade 7-8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles dark shade 7-8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlarfacings, dressed stone work and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brick works with fly ash brick old size straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000 ltrs complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required using reducer and check nut complete all as specified and as directed.

Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down GI 20mm steel tubing and connections including cleaning for refixing or removal form site complete all as specified and as directed.

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing old 15mm GI tubing and connections in new or old position (walls, ceiling, floor etc) complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing old 20mm GI tubing and connections in new or old position (walls, ceiling, floor etc) complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

Taking down cement plaster on wall & ceiling of any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plaster on fair faces of brick work in two layers (10mm thick & 5mm thick each) with ready mix pre packed proportioned dry mix mortar, blended with PP fibers mixed with liquid water proofing compound in top layer 200ml per bag of cement or as per manufacturer's instructions finishing the surface fair & even complete all as specified and as directed. Note: Liquid Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M&L 15mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and fair without using extra cement complete all as specified and as directed.

M& L for complete removal of existing wall surface finish and applying two coats of acrylic based distemper of shade as approved by GE over a coat of primer over and including two coats of wall care putty on wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of acrylic based distemper of shade as approved by GE over a coat of primer over and including two coats of wall care putty on wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilimg and applying two coats of acrylic based distemper of shade as approved by GE over a coat of primer over and including two coats of wall care putty on wall surfaces complete all as specified and as directed.

M& L for complete removal of existing ceiling surface finish and applying two coats of acrylic based distemper of shade as approved by GE over a coat of primer over and including two coats of wall care putty on ceiling surfaces complete all as specified and as directed.

Material & Labour for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material & Labour for complete removal of old surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface of wall complete all as specified and as directed.

S&F in repair table top wash hand basin , of size 500 mm x 425 mm x 130 mm including 32 mm size brass chromium plated waste coupling all fixing assoseries complete all as specified and as directed. Make: Jaquar, Cat Part No. FLS-WHT-5935 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair table top wash hand basin , of size not less than 480 x 470x195 mm including 32 mm size brass chromium plated waste coupling all fixing assesories complete all as specified and as directed. Make: Jaquar, Cat Part No. JDS-WHT-25903 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F as in repair 15mm bore brass chromium plated pillar cock with extension body single lever tall body with 180 mm extension body fixed spout basin mixture with pop up waste system with 600 mm long braided hoses etc complete all as specified and as directed. Make: Jaquar, Cat Part No. VGP-81021N or techno commercially equivalent make as listed in List of Makes as approved by the GE.

M&L for Granite (of any type) tiles 18 to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and rounding of edges polishing including screed bed complete all as specified and as directed.

S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete all as specified and as directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and as directed.

S&F in repair for hand shower (Health Faucet), dia 8mm 1 mtr long flexible tube & wall hook complete all as specified and as directed. Make : Jaquar, Cat Part No. ALD-573 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair for single Towel rail 450 mm long complete all as specified and as directed. Make: Jaquar Cat Part No. AQN-7711A or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair for Shower Basket small complete all as specified and as directed. Make: Jaquar Cat No. ACN-1177N or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair for Corner Glass Shelf (with bracket) complete all as specified and as directed. Make : Jaquar Cat Part No. ACN-1173 or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair for Towel Rack with lower hanger (stainless steel) with hook complete all as specified and as directed. Make: Jaquar Cat Part No. AHS-1581H or techno commercially equivalent make as listed in List of Makes as approved by the GE.

S&F in repair two way bib cock with wall flange complete all as specified and as directed. Make : Jaquar, Cat Part No. QQT-7041 or techno commercially equivalent as listed in List of Makes as approved by the GE.

S&F in repair 15 mm bore angle cock CP with flage complete all as specified and as directed.

S&F in repair Toilet paper Holder (Stainless Steel) complete all as specified and as directed. CAT No. AHS-1551 of Jaquar or equivalent in Grohe/Kohler complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S & F Soap dish CP complete all as specified and as directed. CAT No. AQN-7731 of Jaquar or equivalent in Grohe/Kohler all as specified and directed.

S&F in repair CP Towel Ring Round complete all as specified and as directed.CAT No. AQN-7721 of Jaquar or equivalent in Grohe/Kohler complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concreteor brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S& F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC bends of any radius acess door complete all as specified and as directed.

S&F in repair 40mm (HDPE) of pressure rating 6 Kgf/CM2 fixed complete to walls ceilings or in floors etc complete all as specified and as directed.

Taking down chowkat with shutter exc 1.5 sqm and n.exc. 4.00sqm each and removing from site complete all as specified and as directed.

S&F Powder coated minimum thickness of powder coating shall not be less than 50 micron aluminium window sliding type three track (2 glazed & one gauze shutter) aluminium sections weighing not less than 1.25 kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.0 mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating shall not be less than 50 micron) partition wall or fixed type window/ventilator made out of aluminium anodized standard hollow section 100x40x1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing light grey lamination including taking down of old wooden partition complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating shall not be less than 50 micron) aluminium louvered ventilators of any size with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating shall not be less than 50 micron) anodized aluminium door made out hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminium tower bolt of 200mm size, 1 no mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu /Titz ) shutter to be paterly glazed with 5mm thick tinned glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete all as specified and as directed.

M&L for rolled mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 100 mm butt hinges stainless steel complete all as specified and as directed.

S&F repair SS Curtain Rod with fixing brackets, stops, rollers etc. complete all as specified and as directed.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkat with shutter n. exc. 1.5sqm each including Builder's Hardware (without taking off shutter from the Frame) complete all as specified and as directed.

S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/ chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) , calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) Minimum compressive strength of 58 N/mm2 , modules of eleasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasterners of required dia and length complete as per direction of Engineer-In-Charge (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed. Note: For WPC solid door/ window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus sides shall be acceptable but no extra payment on this account shall be made.

M&L for factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel, supplying & fixing inframe at site as per specification& drawing but 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and as directed.

S&F aluminium handles 125 mm size cast type anodised complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C-2 (40mm graded stone aggregate) as in plinth protection path way/hardstanding laid in bays/panels not exc 2 Sqm each including finishing the concrete surface even and smooth without using extra cement complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n.exc 3 mtr long with 12 mm wide and 50mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L Cement concrete in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped endsetc complete all as specified and as directed.

S&F in repair for Bowl with Cistern for coupled WC with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set, Size - 375 x 650 x 800 mm, S Trap - 250mm or P trap - 180 mm complete all as specified and as directed. Make : Jaquar Cat No. ARS-WHT-39751S250UFSMZ / ARS-WHT-39751P180UFSMZ or Techno commercially equivalent in Grohe/Kohler/CERA.

S&F urinal vitreous china of standard size half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F in repair curved shaped Urinal partition (of size 900X 450 mm) with 10 mm thick frosted glass including all fittings and fixtures complete all as specified and as directed. Model No. JSE-CHR-110UC450X of Jaquar or Techno commercially equivalent in Grohe/Kohler/CERA.

Demolition of Reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, landings, chajjas, facia and similar suspended work complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A1 using 20mm garaged stone aggregate as in chajjas, beam, Column, roof, landing, shelf, platform, facia and like complete all as specified and as directed.

Form work to chajjas, facia, roof, landing and like for rough finished surface of concrete flat complete all as specified and as directed.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item of Schedule 'A'.

M&L for waterproofing Coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane including laying of standard PVC fabric mesh after laying of first layer of polyurethane based water proofing liquid membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.

Taking down Wall paneling and similar work complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Single Side Prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section ,Tube etc), including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for Gypsum board 12 mm thick (Gyproc) for seamless false ceiling to flat surface fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish complete as per manufacturer instruction complete all as specified and as directed.

Supply and fixing for Gypsum Board 12 mm thick cornices up to 100 mm wide along the false ceiling on vertical surfaces fixed with cadmium plated screw, design as approved by GE complete all as specified and as directed.

M&L applying two coats of plastic emulsion paint on wall/ceiling surfaces of any description over 10 cm girth or width not other wise described over a coat of primer over two coat of wall care putty complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and appplying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and appplying one coat of white wash complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :-

One light point controlled by one way switch 5/6 amps complete all as specified and as directed.

One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

One bell point controlled by one way switch 5/6 amps complete all as specified and as directed.

All as per item No 99 above but wiring with 2.5 Sqmm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and as directed.

S&F Call bell Ding dong, 230 Volt single phase complete all as specified and as directed.

S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F of decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed. Make: Havells , Cat Part No. LHFOECE1TZ1B014 or techno commercially equivalent as listed in List of Makes as approved by the GE.

S&F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.

Taking down carefully ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and as directed.

M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and as directed.

Material and labour for concealed sub-main wiring along with earth wire of size of 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unserviceable aluminium submain wiring complete all as specified and as directed. Note : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB"S/isolators with and including taking down old one complete all as specified and as directed.

Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 125 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed. Make: L&T, Cat Part No. BB40630C or techno commercially equivalent as listed in List of Makes as approved by the GE.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

M&L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.

M&L for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing complete all as specified and as directed.

S&F exhaust fan with louvers 250 mm sweep (Plastic rust proof Body and blade), BLDC Fan, energy efficient, AC single phase 240 volts, 50Hz,, Air Delivery – 860 CMH and connecting up complete including built in louvers and provision of 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan complete all as specified and as directed.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, including necessary connection complete all as specified and as directed.

S&F post top lantern 20 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements and taking down of old unserviceable one complete all as specified and as directed.

M/S PLABAN KUMAR GOPE

MESSRS SEN BROTHERS

AYAN DAS

SHRI ARABINDA GHOSH

SHIVAAY CONSTRUCTIONS

NARAYAN MAJUMDER

M/S MOHAN KUMAR BANSAL