Supplying, installation, testing and commissioning of 50HP Electric Pump set complete with all accessories at MeethaPur Pump House.

SITC of Horizontal centrifugal non clog end suction mix flow pump with 200 X 250 mm suction and delivery sizes capable of delivering minimum 600 Cum/ hr at a head of 10 mtrs, CI impeller suitable to handle solid minimum 75 mm dia gland packed stuffing box complete with 50 HP, 415V, 50 Hz , 1470 Rpm squirrel cage induction horizontal electric motor coupled on a fabricated base plate through a set of flexible coupling AVM pads and complete company fitted i/c motor/ pump foundation, dismantling the existing one ( if required) etc as reqd. Material of construction (MOC) of pump should be with CI casing CI Impeller, EN8 Sleeve & SS shaft etc. as required complete at site Kriloskar Pump Model MF 20/25.

Providing , laying, testing & Commissioning of 'C' Class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbows, ttes, flanges, tapers, nut bolts, gasket etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade as complete as required : a) 250mm dia (Wall thickness 6.3mm)

Providing , laying, testing & Commissioning of 'C' Class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbows, ttes, flanges, tapers, nut bolts, gasket etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade as complete as required : a) 200mm dia (Wall thickness 6.3mm)

SITC of cubical type Power Cum Motor Control Center Panel Indoor Type suitable for 415 Volt, 3 Phase, 4 wire, 50 Hz Ac supply system fabricated in compartmentalized design from 2 mm thick CRCA Sheet of size for frame work and covers, having gland plate not less than 2 mm including cleaning and finishing complete with powder coating in approved shade having Bus Bar not less than 500A capacity for incomer. The bus bar shall be of electrical Grade Aluminium high conductivity fitted on DMC/SMC bus bar supports with short circuit withstand capacity of 31 MVA for 1 Sec. Bottom base frame of MS Section shall not be less than 75mm in Height. Entire panel shall have a common copper earth bus of suitable size at the rear with earth stud at both sides, solid connection from main bus bar to switch gear with require size of Aluminium Bus bar (Wherever require) and control wiring shall be done with 1.5 sqmm PVC insulated copper conductor single core cable. The size of the panel shall not be less than 2200X3000X500MM, including providing and fixing of required accessories such as 400A TP MCCB, 400A FP on load Change over switch, Manual type, CT's, Phase Indicator Lamp , Breaker Indication lamp, Three Pole Power Contractor, Phase Sequence Relay, 160A TP MCCB, Thermnal magnetic relay, Star-Delta conservation timer, FASD Starter, Indication Lamps & Push Button with contact Blocks etc. complete as required.

Supplying, laying & testing of PVC insulated armoured and PVC sheathed (General Purpose) multi core cable with standard aluminium conductor suitable for working voltage upto and including 100 volts confirming to IS 7098/part/1988 with 1988 with amendment no as required. (Make:- Havells/National/Polycab/Grandlay/Glouster or as approved by Engineer-in-charge). 3.5 x 70 Sq.mm

3.5 x 35 Sq.mm