Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 CrAccepted-AOC BAROO KARGIL LADAKH UT PIN 194105 | KARGIL | KARGIL | LADAKH UT | 194105 | ₹4.9 Cr | L1 | Accepted-AOC Being lowest bidder |
| 2 | L2₹6.6 Cr+₹1.8 Cr (36.5%)Rejected-AOC | ₹6.6 Cr+₹1.8 Cr (36.5%) | L2 | Rejected-AOC Not being lowest bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Bidder does not meet all required criteria. Hence found non-responsive. |
Tender Value
₹4.9 Cr
EMD Value
₹5.6 L
Closing Date
25 Sept 2024, 11:50 amClosed
Chief Engineer, Project Vijayak
HQ CE (P) Vijayak, C/o 56 APO, Pin 931721, Kargil, Ladakh
SURFACING WORKS ON SANKU-KUNORE-SAPILA-MULBEK ROAD BETWEEN KM 17.00 AND KM 21.00 UNDER 55 RCC/ 762 BRTF PROJECT VIJAYAK IN THE UNION TERRITORY OF LADAKH
2024_BRO_668202_1
CE(P) VJK/14/2024-25
Open Tender
Civil Works - Roads
Item Rate
365 days
Bet Km 17.00 to Km 21.00 on SKSM road
As per tender documents
9 documents required · 9 mandatory
₹0
₹5.6 L
Yes
Office of Chief Engineer, Project Vijayak,Kargil,
14 Nov 2024
30 Aug 2024
26 Sept 2024
31 Aug 2024
25 Sept 2024
18 Sept 2024
2 Sept 2024 - 7 Sept 2024
9 Sept 2024
Amount
Preparation of sub-grade in HR by excavating upto 20 cm average depth, filling with small stone metal out of excavated material, dressing to required camber or super elevation and consolidating with power roller including disposal of surplus material within a lead of 30m as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
Preparation of sub-grade in SMB by excavating upto 20 cm average depth, filling with small stone metal out of excavated material, dressing to required camber or super elevation and consolidating with power roller including disposal of surplus material within a lead of 30 m as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract
Earthwork in embankment by filling with earth free from roots etc. spreading in layers not exceeding 30 cm including watering and finishing to required slope & level not exceeding 1.5 m high above the base in ordinary soil in hill roads where cut & fill method is adopted as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract
Providing and laying of GSB 15 cm thick (compacted) with stone aggregate conforming to grading No 1 as per Table-400-1 of MoRT&H specifications for Road & Bridge works (fifth revision) including supply of material, watering and compaction all complete as specified in Particular Specifications and as approved by Engineer-In-Charge/OC Contract.
Providing Sand Blanketing to a depth of 25 mm spraying water, compacting with power roller complete in all respects as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
Providing and laying of WMM of 75 mm compacted thickness conforming to clause 406 of MoRT&H (Fifth Revision) specifications as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract
Providing and laying of DBM of 50 mm compacted thickness conforming to clause 505 of MoRT&H (Fifth Revision) specifications as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
Providing and laying of Bituminous Concrete of 40 mm compacted thickness conforming to clause 507 of MoRT&H (Fifth Revision) specifications as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
Application of Tack Coat by mechanical means conforming to clause 503 of MORT&H (Fifth Revision) specifications as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
Application of Prime Coat by mechanical means conforming to clause 502 of MORT&H (Fifth Revision) specifications as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
Providing and marking of Centre & Edge line with thermoplastic paint and glass beads with road marking machine conforming to clause 803 of MORT&H (Fifth Revision) specifications as specified in Particular Specifications or as directed by Engineer-In-Charge/OC Contract.
AMAAN ENGINEERS (BID ID -3112223)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .