WBPWD/ AE/ PESD-I/e-NIQ-53/ 2023-2024

Amount

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (upto 160A-6way)[D-11/15] Make: L&T,Legrand, ABB, HAGGER, SIEMENS.

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment [D-9/11] 2 Way [D-9/11]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 35kA with fixed thermal adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (160A-FP)[D-8/10], Make: L&T,Legrand, ABB, HAGGER, SIEMENS.

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [D-6/7] Make: L&T,Legrand, ABB, HAGGER, SIEMENS. TP(63A) For VTPN outgoing

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, on wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (2+12Way)[D-9/13], Make:Legrand, SCHNEIDER, ABB, HAGGER, CRABTREE.

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [D-6/7] Make:Legrand, SCHNEIDER, ABB, HAGGER, CRABTREE. SP(40A) For Outgoing

SP(6-32A) For Outgoing

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. FP(63A) For AC

DP(63A) For Incoming For Lift

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make:- Gloster/KEI/Polycab/ Havells or RR Kabel] 4 Core 95 sqmm

4 core 50sqmm

4 core 25 sqmm

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [F-2/1(b)]

Laying of cable upto 4 core 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below[F-4/7c] 4 Core 95 sqmm

For 4 Core 50 sqmm

For 4 Core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials[F-5/8b-xii] 4 Core 95 sqmm

For 4 Core 50 sqmm

For 4 Core 25 sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit 'FR' (Make :- AKG, PRECISION, Anchor) incl. necy. fittings as required [E-14/1a] Make for wires :- RR Kable, Finolex, Polycab or as per EIC 4x(10 sqmm)+2x (6 sqmm)

4x56/0.3 (4 sqmm) + 2x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Finishing of the PVC insulated Copper wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 16 sqmm

S & F 3 phase timer box Made of 16 SWG MS sheet (size approx– 400 X 350 X 175mm) with powder coated synthetic paint incl. hinged type MS door , inter locking system consisting the following materials : 1) S & F 24 Hr. timer (Make-L & T , Cat No. AUTS03ANA00 Or equivalent make of Legrand) – 1 no. 2) S & F 440 Volt 40A 3P contactor (Make-L & T, Type- ML – 3 , cat no. SS91851) – 1 no. 3) 6 amp auto mannual toggle switch – 1 no. (Make- L &T/ Legrand) 4) Indicating lamp B & G (Make-L&T) – 2 nos. 5) 440V, 40A, 10KA, C-series SP MCB (Make- Legrand)on din rail for incoming-1no 6) 100A capacity 4W Brass stud type connector on FRP chair for I/C & O/G- 2nos All control circuit wiring would be made by 1x1.5 sqmm stranded Cu wire(FRLS) and the I/G & O/G circuit with 1x6sqmm copper wire maintaining colour code incl taping, socketing to complete the work. The box should be fixed on wall with suitable size of flush nut and necy. Connection.(For AC)

S&F Street light/Outdoor light/Compound Light Timer DB(Water Proof) concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and febricated with following items as per instructions of EIC i) 240 V, 6-32 A SPMCB of breaking capacity 10KA & ''C'' Charecteristic -- 01 no ii) 240V 6-32 A DP MCB Isolator on din rail --- 01 No. iii) 240V , 2P, Power Contractor (rating above 20 Amp) with accessories ----- 01 no iv) Astronomical / Digital timer switch --- 01no v) Toggle switch for manual/auto operation --- 01no. vi) Double door 2+4 Way SPNDB ---- 1No vii) Necessary connection by copper wire. [Make = ABB, Simens, Legrand, L&T, Havelles ]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. as per GS. E6/21

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [D-13/22]

Supply and fixing 12W LED bulb (Bajaj/CG/Philips/wipro /Havells) on existing batten holder

Supply & Fixing 63A ,300 m A FP RCCB for lift Cat No.DHRZAMFF300063

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 200 A Make -L&T [D-3/4(a)] (For fire pump)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 100mm dia [F-6/11(g)]

RAHUL TRADERS

SREE LALJI