Construction of gate column, chain link fencing, drainage, pipeline arrangements, aluminium partition and wiring for computer at the new CE/TP-II/Trichy office building at Milaguparai 110 KV SS.

Amount

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Removing hard rock by wedging, chiselling and trimming to proper shape where blasting is prohibited

PCC 1:3:6 (M 10), using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC 1:1.5:3 (M 20) using 12 to 20mm (machine crushed) metal for raft foundation without formwork including cost of all materials, water charges, labour, lead, lift, etc., complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC 1:1.5:3 (M 20) using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, labour, lead, lift, etc., complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC 1:1.5:3 (M 20) using 12 to 20mm HBS metal (machine crushed) for Grade beam/plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excluding cost of steel reinforcement (by using mixer machine).

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Plastering with CM.1:5 mix 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. By using II class Champer Burnt bricks

Supplying and fixing in position of MS grill gate including cost of all materials lead, lift, etc. as per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of enamel paint over with one coat of red oxide.

Supply & fixing of 50 Sq mm GI Chain link fencing of 10 gauge with standard width of 1.80 m height including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing in position MS channel 75x40 mm over for corner fence post and MS flat 75x6mm width for intermediate post including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of GI 175x16mm size bolt, nut and washers of required sizes for holding chain link fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Site Engineer.

Fabrication, Transport & fixing of GI angles for fencing with anchorage and placing in position as directed by the engineer at site including cost of angles, cutting and all labour, lead, lift, etc. Complete (Angle Supplied by department )

Collection supplying and stacking of red gravel including cost of all materials lead lift labour etc complete.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ Novanpan or Equivalent] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete as directed by department Engineer at site.

Suppying and fixing of Box cup board of depth 2 ft depth with 4 nos of Racks using 18mm thick ply wood and sun mica green ply make including handles, locks and other accessories as per the instruction of site Engineer, cost of all materials, transport charges, lead, lift, etc, complete.

Supply and fixing of 1 " dia CPVC pipe including cost of pipe, connection specials, cost of all other materials, transport, labour charges, lead, lift, etc, complete.

Supplying and fixing in position of 25mm dia Gate valve of best quality such as leader, zeolite, zenith, including cost of all special fixtures lead, lift,etc., complete.

Suppling erection of executive chair including cost, lead, lift, etc complete.

Suppling erection of executive revolving chair including cost, lead, lift, etc complete.

Supplying and fixing of ECO or ISI brand hydralic door closer including lead, lift, cost, labour for fixing etc complete.

Drilling of bore well of size 200mm/250mm dia in all soils & rock stratum with power drilling machine including transport, labour etc complete.

Inserting the 200mm dia PVC casing 6Kg/cm2 with or without slots in drilled hole including cost of PVC pipe jointing the pipes with PVC coupler etc complete.

S&F of 3 phase 2HP Submersiable pump with accessories of approved make of Texmo or ELG Iincluding cost of all materials, labour transport, lead, lift etc with mounting platform & foot valve arrangement and 3 phase 15 amphs L& T starter arragements etc complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. Complete with PWD earthing. (SD 173)

Supplying and laying pvc pipe 32 mm outer dia 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete.

Supplying and fixing of wash basin of size 560x410 mm of approved quality neycer/parrys ISI including cost of wash basin with pedastal cock fixing using rag bolt and nut 15mm dia pvc connecting hose and outlet using 50mm dia pvc waste water pipe for outlet cp angle valve with all accessories including cost of all materials, labour, lead, lift, etc., complete.

S.P.M.CONSTRUCTIONS