Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 CrAccepted-AOC 142 | ₹5.6 Cr | L1 | Accepted-AOC First Lowest |
| 2 | L2₹5.6 CrRejected-AOC A 52 CHANAKYA PLACE NEW DELHI BRANCH OFFICE B 175 NANDGRAM GHAZIABAD PIN CODE 110045 | NEW DELHI | NEW DELHI | DELHI | 110045 | ₹5.6 Cr | L2 | Rejected-AOC Second Lowest |
Tender Value
Refer Docs
EMD Value
₹11.3 L
Closing Date
4 Dec 2024, 2:00 pmClosed
SE Irrigation Works Circle Varanasi
Superintending Engineer Irrigation Works Circle Varanasi
Restoration of Internal, Outer Section and Demarcation of Ben Dy. from Km. 0.000 to Km. 16.000 in District Chandauli.
2024_UPIDC_976067_3
06/SE/2024-25
Open Tender
Civil Works
120 days
Ben Dy, Post Tiyari
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,354
₹11.3 L
24 Dec 2024
29 Nov 2024
4 Dec 2024
29 Nov 2024
4 Dec 2024
29 Nov 2024
Amount
Dismantling old and damaged brick/ stone boulder pitching including stacking of materials as directed by Engineer In-Charge. Within a distance of 60 meter.
Dismantling brick work including stacking of dismantled materials as directed by Engineer In-Charge. Within a distance of 60 meter.
Dismantling reinforced cement concrete 1:2:4 and Reinforced brick work including stacking of dismantled materials as directed by Engineer In-Charge. Within a distance of 60 meter.
Preparation of sub grade before laying of Pitching excluding cost of earth work.
Providing & Laying of Geo textile sheet below pitching including cost of all material, labour, T & P etc. required for proper completion of work.
Providing and laying 15 cm thick stone boulder pitching grouting with 1:6 cement mortar,coarse sand of FM. not less than 2.2 with cost of material, labour, T&P etc. required for proper work , with stone boulder recieved from dismantled stone pitching.
Providing and laying 15 cm thick stone boulder pitching grouting with 1:6 cement mortar, coarse sand of FM. not less than 2.2 with cost of material, labour, T&P etc. required for proper work, with new stone boulder
Stone masonary work in 1:3 cement mortar with cement,coarse sand,stone boulder including labour T&P and materials
Deep Struck Cement Pointing on masonary work & Pitching work in 1:2 cement mortar with all materials T&P etc complete .
Deep struck pointing in 1:2 cement mortar on brick work surface with cement and coarse sand F.M. 1.5 to 2.0 including all material, labour, T&P etc.
Excavation of foundation in ordinary soil/sandy loam, clay or sand including lift up to 1.50 meter and lead 30 meter and ancluding filling, watering, ramming of excavated earth in to the trenches or up to the space and sides of the foundation trenches or up into the plinth and removal and disposal of surplus earth as directeb by Engineer-in-charge up to a distance up to 30 meter from the foundation trenches.
Cement concrete 1:3:6 in foundation under toe wall upto 3 meters lift and lead upto 60 meter mechanical mixing with cement,coarse sand, brick ballast 20-40 mm including labour T&P and materials with brick ballast received from dismantled brick pitching.
Cement concrete 1:3:6 in foundation under toe wall upto 3 meters lift and lead upto 60 meter mechanical mixing with cement,coarse sand, stone ballast 20-40 mm including all cost of labour T&P and materials.
First class brick work in 1:4 cement mortar with first class brick, cement and coarse sand F.M. 1.5 to 2.0 including all cost of material, labour, T&P etc.
Cement concrete 1:2.:4 in floor of VRB upto 3 meters lift and lead upto 60 meter mechanical mixing with cement,coarse sand, 10-20mm size stone grit including labour T&P and materials.
Wearing coat with M-20 (1:1.5:3) in cement, coarse sand F. M. above 2.0 and crushed stone grit 10-20 mm and 4.75-10 mm with mechanically mixed including all cost of material, labour, T&P etc.
Cement plastering 1:2 cement mortar on brick work upto 12mm thickness in delivery tank and intake tank including of all material, labour, T&P etc.
Pucca road cutting (Painted) including cost of labour. T&P etc complete with proper disposal as per the direction of engineer in charge.
Construction of granular Sub-base by providing well graded material , spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Techincal Specification clause 401
Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Grading-2 as per Technical specification Clause 405
Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Gradeing-3 as per Technical Specification Clause 405
Brick edging on both side of road with first class brick 8 cm wide and 12 cm deep laid with mud mortar including all materials, labour T&P etc. complete.
Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per Technical specification Clause 502
Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with hydraulic broom as per technical specification clause 503.
Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emuslion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of Type 'C' as per Tehnical Specification Clause 508
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels , grade and cross fall using Type'C' as per Technical Specification Clause 510
Laying & fixing in position and alignment 150 mm dia R.C.C. hume pipe including all material, labour, T&P etc.
Providing, Laying & fixing in position and alignment R.C.C. hume pipe NP-3 including collars/ sipigot jointed with stiff mixer of cement in the propotion of 1:2 (1 cement: 2 coarse sand ) including testing of joints 900 mm dia
Letter Writing on boundary pillar above 80mm size including material, labour, T&P completion of work
Finishing wall with water proof cement paint of approved make such as super snowcem of required shade on new wall surface with two coat of paint over one coat of primer to give an even shade after thoroughly brushing the surface to remove all dirt and remains, loose powdered materials including curing and cost of all materials, labour T&P etc. required for proper completion.
R. C. C. with M-20 (1:1.5:3) in slab and bed block with cement, coarse sand F. M. above 2.0 and crushed stone grit 10-20 mm and 4.75-10 mm size with mechanically mixed and mechanically compaction including all cost of material, labour, T&P etc.
Reinforcement work in slab and bed block with cutting, bending, placing, binding including cost of all material, labour, binding wire, T&P etc.
Shuttering & Centering for slab and bed block including all material, labour, T&P etc.
Supplying and fixing of stone wheel guard including cost of all material, labour, t&p etc.
Fabrication & installation of steel gate with channels and providing outer channel ,and mild steel leaf with other accessories as per required including cost of all material ,labour,T&P etc. required for proper completion of work.
Turning work with proper finishing of spindle rod C-20
Earth work in correcting internal section of canal by Porclain/JCB machines including side slope cutting at required slope with all lead and lifts in all type of soils with disposal on daula and top & outer slope of banks as directed by site-incharge, including spreading and partial dressing.
Filling E.C. Bag with earth avilable at site in internal scoured portion of canal to protect banks including stitching with cost of sutali and placing at site up to 60m lead including cost of all material, labour, T&P etc. required for proper completion of work.
Jungle clearance on feeder channel, link channel,main channel including complete section of both bank
Cutting under growth trees from 10 to 20cm dia including removal of root and their collection within 30 meter
Providing & fixing of boundary pillar in position
gopi constech pvt. ltd. (BID ID -4761112)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid