Paving work of courtyard at Senior Fisheries Officer office complex at Kullu Distt Kullu HP

Amount

Paving work of courtyard at Senior Fisheries Officer office complex at Kullu Distt. Kullu (H.P.)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, lift upto all depth, including getting out the excavated soil and disposal of surplus excavated soils as directed, within all lead .including pumping or bailing out water upto all lead and lifts,as directed by the Engineer-In -Charge, including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.Any loss to the public and private property during the course of execution and disposal of unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respects in all cases as per direction of the Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls Under 20 cm wide as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6coarse sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Structural steel work riveted, bolted or welded in built up sections, trusses graiting, ladder and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Ravinder Kumare (BID ID -450011)