Renovation and Extension of Orang PWD (R) IB under SOPD-G for the year 2019-20, Mazbat LAC.

Amount

(A) Cost of Renovation Works: Demolishing C.C floors of various thickness including top layer and base course and disposal etc. complete.

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes.... (i) Area of door/window up to 3.00

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrough, framed and fixed in position in contact with C.C or brick necessary wall etc. etc. complete specified. With 1st class local wood Hollock/Bonsum

Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidized iron butt hinges. etc.complete. (A) With Track wood (ii) 35mm thick.

Providing fitting and fixing full pannelled door/windows including oxidised M.S butt hinges with necessary screws. (a) With 1st class local wood Bonsum/Hollock (ii) 35mm thick

Providing fitting and fixing full glazed window with sash bars including oxidized M.S but hings (75mm x 60mm x 3.15mm) 2 Nos each. (b) With Hollock/Gamari/Bonsum wood. (ii) 30mm thick.

Providing fitting and fixing fully glazed clerestory window and fan light including fitting and fixing 2 M.S. Pivot hinges (75mm x 20mm x 3mm) eye hook and nylon chord complete (glass panes shall be measured and paid separately) (c) With 1st Class Local Wood (ii) 30mm thick.

15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level including arrises, or rounded angles, not exceeding 80 mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 as directed.

Providing polished Ceramic tiles of approved quality size shape and thickness not less than 8mm wall and skirting over cement bed 10mm thick in prop..1:3...etc. complete. (a) Normal Range (Somany/Orient/Nitco/Varmora/VITA/Marbito/Make. (ii) Of Size 600mmx600mm and above.

Providing polished vitrified wall tiles of approved quality size shape etc. complete. Ii) of Size 300mm x 600mm and above.

Providing corrugated galvenised Iron sheet roofing of TATA SHAKTEE/SAIL including fitting and fixing necessary galvenised J or L hooks, bolts and nuts 8mm dia with bitumen washer 25mm dia x 3mm thick and 1.6mm thick limpet washer complete excluding.......

Providing Iron riding of TATA Shaktee including supplying and fixing necy golvd screws/washer etc.complete. (e) 0.63mm thick (u) 230mm lapping.

Providing, barge board of size 200mm x 20mm with 1st class local wood hollock/bonsum timber including fitting & fixing with necy. Wood screws complete.

Providing 13mm mesh hexagonal wire made of one is designation (10mm dia) wire above post plate etc.complete.

Providing fitting and fixing M.S grill of required pattern for windows/ clerestory windows/opening with M.S flats at required spacing in frame all ground, squre or round M.S bars with round headed bolts and nuts or screws. (1) Plain Grill. (a) Fixed to wooden frames.

a) Removing white or colour wash by wire brushing and/or scraping sand papering and preparing the wall surface. Etc. complete.

Providing two coats of Birla White Wall Care Putty (Water Resistance) White Cement based putty for cement etc. complete. (i) Thickness 1.5mm thick

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the etc. complete.

Wall painting (two coats) with Plastic paint approved brand and manufacture etc. complete. (a) Plastic Emulsion Paint approved brand and manufacture etc. complete.

Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium acnylic.......

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter, sand papering and knotting. (b) With ready mixed paint, wood primer (white).

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and topping. (i).Surfaces over 100mm in width or girth. b) High gloss (Asian paint/ Berger paint/ ICI paint).

Applying primary coats new steel and other metal surface over 100mm in width or girpt etc. complete. (a) With ready mixed "red-lead/red oxide" primer

Painting two coats (excluding priming coat) on new steel and other metal with enamel paint of approved i) Surfaces over 100mm in width or girth a) General purpose (Asian paint/Berger paint/ICI paint)

Applying mordent solution of approved brand and manufacture on new C.I sheet for preparation of surface etc. complete. B) On fair side b) In cement mortar 1:4

Painting one coat G.C.I sheet roofing sheet with ready mixed anti corrisize of approved brand.

Extra over item no.13.8.3 forevery sub-sequient coat of paint ....etc.

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects............etc.complete as directed. a) Sliding door bolts (i) 300mm x 16mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects............etc.complete as directed. b) Tower bolts (ii) 250mm x 12mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects............etc.complete as directed. (ii) 250mm x 12mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects............etc.complete as directed. (d) Bult hings (ii) 50mm x 35mm x 3.2mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects............etc.complete as directed. (ii) 75mm x 45mm x 3.2mm

Providing and fixing clear sheet glass beded etc.complete. (i) Area of glass panes not excluding 0.15m2

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortyar in proporation 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat solimg including 15mm thick cement platerin in prop.1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300mm vide average 250mm deep bed slope 1 in 150 with initial depth of 100mm.

Sanitary & Water Supply Works: Providing fitting and fixing water closet required pattern indian type W.C. Orrisa of sixe 580mm x 450mm etc. complete. B) Coloured a) Pal wal pit

Providing fitting and fixing vitrious china flat...etc. complete. A) Parry ware make b) Colour (i) AQUAFREE URINAL (cat. No.60017)

Providing vitreous China wash basin with CI/MS brackets C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls whever required. (Aillar cock, stop cock, waste cenpling are to be paid separately) 1.13.2 Basin (Without Pedestal) (A) PEDESTAL BASIN a) White (i) Duke 660 x 495 (Cat. No.C8416/White etc. complete)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS bracket etc. complete. (A) (i) Single Bowl with veg Bowls.........(400 x 200)

Providing fitting and fixing Mirror with plastic frame of size 500mm x 400mm complete as directed and specified. A) Parryware a) Size 800mm x 600mm

Providing fitting and fixing glass shelf etc. complete. (i) Agmeco make (c) Cat. No.00104

Providing fitting and fixing recessed soap tray dish etc. complete. D) Sona make (i) Soap dish hight (Cat. No.TR-0661)

Providing, fitting and fixing CP towel rail etc. complete. (a) Jaquar make (i) Continental 300mm for wash basin (Cat.No.ACN-1101N)

Supplying, fitting and fixing PVC pipes 6Kg/cm2 etc. complete. (a) In exposed surfaces. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes 6Kg/cm2 etc. complete. (a) In exposed surfaces. (ii) 90mm dia.

Supplying fitting and fixing 87.50 PVC bend of supreme primer etc. complete. Ii) 110mm dia

(B) Extenstion of I.B. Building: Earth work in excavation for foundation trenches of walls, retaining walls, footing of column, steps and septic tank etc. including refiling (return filling) the quantity as necessary after completing of work. breaking clods in return filling dressing, watering and ramming etc. and removal of surplus earth with all lead & lift as directed and specified in the following classification of soils including bailing out water where necessary as directed and spedified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering works where necessary shall be measured and paid separately.) (a) In prop 1 cement :4 sand : 8 coarse aggregate by volume.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks,supprots,chairs,spacers etc complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (b) ISI approved super ductile TMT Bar.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks,supprots,chairs,spacers etc complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (c) ISI approved Mild Steel reinforcement bar (M.S. Bar) a) 6mm dia.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc. 3.2.1.1 Column, pillar, post & strut of square/rectangular/polygonal in plan or any shape like Tee/L etc.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc. 3.2.1.2. Side and soffts of beam haunchings, cantilever girder, bressumers, lintel & horizontal ties. (a) For depth not exceeding 1.0M

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc. 3.2.1.3 Flat surface such as soffits of suspended floor, landing slab chajja, etc. a) Floor etc. up to 200mm thickness.

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) with out admixture, plasticiser (b) In prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. (N) with out using admixture, plasticiser (b)In prop. 1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed . (I) In sub-structure up to plinth level including dewatering if necessary (b) In proportion 1:4

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Providing and laying 25mm thick damp proof course with cement concrete in prop 1: 1.5: 3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proporation 1:5 (1 cement: 5 sand)

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works rought, framed and fixing in position in contact with C.C or brick necessary wall etc. complete specified. (b) With 1st class local wood Hollock/Bonsum

Providing fitting and fixing coloured anodised aluminium windows and ventilator etc. ii) Ferrowglass 5mm thick

Providing fitting, hoisting and fixing of roof trusses fabricated using any one or combination of following section of (i) Square (ii) Rectangular hollow section of specification SHS/RHS and including purlins, bottom runners and providing M.S. cleat M.S. angle base plank...........as directed as per specification. (b) Using other ISI marked approved brand tube

Providing pre painted galvanised iron sheet (PPGI) at all levels etc. complete iv) 0.55mm thick

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 as directed.

10mm thick cement plaster.. B) In prop 1:4

15mm thick cement plaster in single coat on rough or half brick wall for interior plastering upto 1st floor level including arrises, internal round angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4

Providing polished Ceramic tiles of approved quality size shape and thickness not less than 8mm wall and skirting over cement bed 10mm thick in prop..1:3...etc. complete. (i) Delux Range (Somany/Orient/Nitco) (a) Of Size 100mm x 100mm and above.

Providing polished tiles of approved quality size shape and thickness not less than 8mm on walls and skarting wtc. Complete (ii) of size 300mm x 600mm

Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm etc. (A) Standard Ceilings of Everest make or equivalent as directed by the departement. (ii) Using 4 mm thick FC Board

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required and of required shade on new wall surface (two coats) to give an even shade after thouroughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in proporation 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plasterin in prop 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work.... (ii) 300mm vide average 250mm deep bed slope 1 in 150 with initial depth of 100mm.

Sanitary & Water Supply Works: Providing fitting and fixing china pedestil etc. complete. B) Coloured

Providing fitting and fixing vitrious china flat..etc. complete. A) Parry ware make

Providing vitreous China wash basin with CI/MS brackets C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls whever required. (Aillar cock, stop cock, waste cenpling are to be paid separately) 1.13.2 Basin (Without Pedestal) (A) PEDESTAL BASIN a) White (i) Duke 660 x 495 (Cat. No.C8416/27)

Providing fitting and fixing Mirror with plastic frame of size 500 x 400mm complete as directed and specified. A) Parryware make a) Size 500mm x 400mm

Providing fitting and fixing reseased soap tray of Hindware make complete as specified and directed. B) Sona make (i) Soap dish hight

Supplying fitting and fixing...etc. complete. A) In exposed surface or trenches iii) 90mm dia

Supplying fitting and fixing...etc. complete. A) In exposed surface or trenches iii) 110mm dia

Supplying fitting and fixing PVC pipe 6 Kg/CM2 etc. complete a) in exposed surface ii) 110mm dia.

Providing and fitting and fixing 450mm dia. 90mm thick C.I Man hole cover etc. complete as directed and specifed.

(C) Cost of RCC Stagging, Filter Unit, Deep tube well: Earth work in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic..............as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Providing soiling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid............ dewatering, complete. (a) Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps.............measured and paid separately. (a) In prop 1 cement: 3 sand: 6 coarse aggregate by volumne.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code.........etc. (b) ISI approved Super ductile TMT Bar (ii) TATA/SAIL

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, and propping etc. 3.2.1.1. Colums, pillars, posts & strut of square/rectangular/polygonal in plan or any shape like Tee/L etc.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, and propping etc. 3.2.1.2. Sides and soffits of beams,beam haunchings, cantilever, girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, and propping etc. 3.2.1.1 Collum, pillars posts & struts a) Square rectangular.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, and propping etc. 3.2.1.2. Side and soffts and intels etc. complete. A) Sqare, rectangular...

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, and propping etc. 3.2.1.3. Flat surfaces such as soffits of suspended floors, roofs, landings etc. (a) Floors etc. 200mm in thickness.

Providing & laying reinforcement cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of from work and reinforcement for reinforced cement concrete work. (i) Using Mixture Machine (a) Foundation, footing, colums with base, tie & plinth beam, pile cap, base slab, retaining walls, walls of the septic........ (N) Without using admixture, plasticiser (b) M15 grade concrete or prop.1:2:4

Providing & laying reinforcement cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of from work and reinforcement for reinforced cement concrete work. (i) Using Mixture Machine (b) In Super Structure from plinth level up to 1st floor level. (ii) Colums, pillars, posts, struts, suspended floor, roof landing, shelf & support balcony, lintel, sill band, beam, girder, bressumer, cantilever, stair case (except spiral stair case and landing) including preparing the top surface & finishing of nosing. (N) Without using admixture, plasticiser (b) M15 grade concrete or prop.1:2:4

Brick work in cement morter including racking out joints and curing complete as directed. (I) In Sub-Structure upto plinth level including dewatering if necessary (b) In proportion 1:5

1st class brick nogged wall in cement morter including racking out joints and curing complete......etc. (b) In cement mortar in proporation 1:5 A) 112mm thick Brick wall

15mm thick cement plaster in single coat on rough side for interior plastering upto 1st floor level including arrises etc. A) On fair side (b) In cement mortar 1:4

Providing fitting and fixing M.S grill of required pattern for window/opening with M.S flat at required spacing 1. Plain Grill (c) Fixed to Brick work/PCC/RCC.

Colour washing with Lince or wall surfaces (two coats) over and including a priming coat of white washing to give and even shade after throughly brooming the surface to remove all dirt...

Deep Tube Well Labour for boring hole for inserting tube well through different soil/rock media including hire charges of drill pipes etc. i) Bore hole of 100mm diameter

Supplying, fitting and fixing pipe (plain/bevel ended) for casing, conforming to solvent IS code of practic including supplying and........... (i) G.I pipe a) TATA/SAIL (Medium) Socket should be welded to the pipes. ii) 80mm diameter

Supplying fitting and fixing section pipes (plain/bevel) conforming to relevent IS code of practice including.......... A. G.I pipe a) TATA/SAIL (Medium) Sockets should be wulded to the pipes ii) 32mm dia meter

Supplying fitting and fixing G.I filter and fixing G.I filter 2.00m long. filter 2.00m long

Development of the tube well compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing cleaning eashing and watering of the tube well

Water supply work Supplying fitting and fixing 1st class I.T.C or similar approved G.I pipe etc. Complete. A) G.I pipe with G.I fittings a) Using Tata/SAIL (Medium) v) 32mm dia

Supplying fitting and fixing 1st class I.T.C or similar approved G.I pipe etc. Complete. A) G.I pipe with G.I fittings a) Using Tata/SAIL (Medium) v) 40mm dia

Supplying fitting and fixing 1st class I.T.C or similar approved G.I pipe etc. Complete. A) G.I pipe with G.I fittings a) Using Tata/SAIL (Medium) iii) 25mm dia

Supplying fitting and fixing 1st class I.T.C or similar approved G.I pipe etc. Complete. A) G.I pipe with G.I fittings a) Using Tata/SAIL (Medium) iii) 25mm dia

Suppyling fitting and fixing country pit value (full way valve) ISI make as specified and directed. B) 40mm dia.

Supplying fitting and fixing G.I floot value with strainer including cutting necy. Thread to pipe.... B) 40mm dia (Heavy type)

Supplying fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of sintex/Polycone/Pattan trank..........complete. I) 2000 Litre Capacity. A) Sintex make

Supplying fitting and fixing Motor Pump Set

JUNUSH MOCHAHARI

Sri Bhaskar Kachari