NIT NO. 11 ITEM NO. 18

Supply of submersible pump set fitted with dynamical balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM, suitable for operation on 3 Ph., 415 ±5% Volts, 50 Hz, AC power supply having Motor Power : 5 HP, Stage: 21-25 Pump head range: 48-88 Mtr, Discharge range: 230-110 LPM, Outlet size: 40mm, suitable for 100 mm bore Size. (03 Nos for Installation +02 Nos for Standby) Make: BS/KBL/ DJB Approved Make

S/o 2.5 sqmm 3 Core PVC insulated flat submersible cable suitable for 1100 Volts Copper Conductor (100 Mtr Roll). Make : Havells / Gloster /Grandley/ DJB Approved Make

S/o G.I. pipe 40 mm dia, Medium class with G.I. flange welded on both sides 3 mtrs long with M.S. ' L' type brackets complete with threading work on each side of the pipe, each G.I. flange should have 4 holes and 2 cuts for cables as per sample. Make of Flange –ISI, Make of pipe: Jindal /Tata/ DJB Approved Make.

S/o G.I Tail Piece of 40mm dia, 1 mtr. Long size medium class completed with one end threaded and one end welded with flange as per sample. Make of Flange –ISI, Make of pipe: Jindal/Tata/ DJB Approved Make.

S/O M.S. clamp of 600mm long 12mm thick complete with nut and bolts and washers for holding the 40mm dia pipe including bending and shaping etc. as required.

S/o Rubber insertion / Jointing sheet of size 3 mm thick. Make : Jyoti/National/ DJB Approved Make.

S/o Required off Size full threaded nut-bolts of good quality .

S/o of MS bore cover 6 mm thick suitable for 200 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 60 mm dia hole in the center.

S/o of MS bore cover 6 mm thick suitable for 150 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 60 mm dia hole in the center.

S/o Canvas Hose pipe 50mm dia 30 Mtr. Long Make : Jyoti / ISI

Lowering of Submersible pumpset with pipe and other accessories, Connection of cable, Installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and lying of GI pipe from bore to panel executing minor Civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipments on No load and full load conditions as per standard and full satisfaction of Engineer-in-charge.This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.

RUDRA ALLIANCE

SAI TRADING CORPORATION

B.S.Enterprises