Supply, Installation, Testing and Commissioning of LED Street Lights to Tannirbhavi Road

Design, Fabrication, supplying and erection of 9 Mtrs height, Galvanized, Octagonal pole Top 70mm and bottom 155mm diameter, base plate 260x260x16mm, PCD 250 and foundation bolts M24x750 works including supplying and fixing of suitable single arm bracket min 1500mm. (Refer Tech Specification’s)

Providing foundation for 9 mtrs Octagonal pole including removal interlock, sand, breaking of concrete, Excavation and making of RCC foundation using M 20 concrete, steel reinforcement, shuttering complete as per pole suppliers approved foundation drawing or depending upon site condition. All supply materials included in this item and re-Colouring

Providing foundation for 9 mtrs Octagonal pole including supply of 24 mm dia GI threaded rod of 750mm long 4 Nos. and fixing it to a depth of 300mm with suitable injectable adhesive. Breaking of RCC curb 0.6 mtrs x 0.3 mtrs x 0.40 mtrs and providing and making of RCC of 0.6 mtrs x 0.5 mtrs x 0.40 mtrs Using M 20 concrete, steel reinforcement including shuttering. And re colouring

Supply and drawing Flexible Multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage up to 1100 volts as pe IS-694:1990. 3CX2.5 sq.mm Copper

Supplying of 4C x 16sq.mm LT UG Cable having Aluminium conductor PVC insulated, galvanized, sheathed, steel wire/steel tape armoured cable with PVC outer sheathing, 1.1KV class (confirming to IS 1554)

Supplying of 4C x 35 sq.mm LT UG Cable having Aluminium conductor PVC insulated, galvanized, sheathed, steel wire / steel tape armoured cable with PVC outer sheathing, 1.1 KV class ( confirming to IS 1554)

Supplying of 3.5C x 95 sq.mm LT UG Cable having Aluminium conductor PVC/XLPE insulated, galvanized, sheathed, steel wire/ steel tape armoured cable with PVC outer sheathing, 1.1 KV class (confirming to IS 1554/7098)

Labour charges for laying of 4C x 16 sq.mm, 1.1 KV class PVC LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required and also work includes drilling of holes in cement concrete passing cable if required

Labour charges for laying of 4C x 35 sq.mm, 1.1 KV class PVC LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/ on concrete wall as required and also work includes drilling of holes in cement concrete passing cable if required

Labour charges for laying of 4C x 95 sq.mm, 1.1 KV class PVC LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/wall as required and also work includes drilling of holes in cement concrete if required

Digging of trench of 1 meter deep x 0.5 meter wide, refilling the trench to the required ground level and consolidating etc., complete.

a) In Hard soil - 2000 Mtr.

b) Asphalt Cutting -200 Mtr.

c) C.C.Cutting(0.6deepx0.5mtrwidth)-100Mtr

Supply and laying of country burnt bricks of size 8”x4”x3”in trench over cable after spreading soft soil at 2” height over the cable

Supplying and laying of NP2 RCC Hume pipe of 300 mm dia. with required collars

Supplying and laying Double walled corrugated DWC HDPE pipe of size 63mm OD and 50mm ID as per IS 14930 part II with necessary connecting sockets, couplings, bends of same materials in existing trench/pole/wall/structure drawing the cable with supply and fixing DWC pipe with Alluminium clamps and stainless steel screws

Supply and erection of 120 watts LED street light fitting -IP65

Supplying and making end termination with glands, lugs of LT cable. 4Cx16 Sq.mm.

Supplying and making end termination with glands, lugs of LT cable. 3.5Cx35 Sq.mm.

Supplying and making end termination with glands, lugs of LT cable. 3.5Cx95 Sq.mm.

Supplying, fixing and wiring earth electrode for panel and street lights using 40 mm dia, 2.90 mm thick GI pipe 2.5 Mtr long with funnel with mesh and suitable size reducer fixed on the top of the Electrode. The funnel should be enclosed in a CC chamber of 400x400x400 mm with cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode covered 150mm alround with alternate layers of salt and char coal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip 25x3mm from Electrode to control panel 2 runs using GI bolts, nuts and washers.(Including supply of GI strips)

Supplying and fixing of spiral earth Electrodes as per standard technical specification as per ESCOM

Providing /stone masonry foundation for control panel and the dimension of the foundation 800(w)x1000(H)x400(D)mm and the gap between the pillars is 350mm for cable connection to the control panel. The foundation starts 300 mm below the ground after making 100 mm stone soling and curing etc. the panel should be stand on the 4 stainless steel bolts (12mmx6”) each bolt with four nuts& washers at 50mm height from the foundation and complete

Supplying and running GI wire for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps , nails, guttas/spacers etc.

Charges for trimming of Tree branches wherever street light poles erected under the tree

Jaydeep Agency Corporation

LITE SYSTEMS INDUS

Falcon TechnoProjects India Pvt Ltd

M/s. Precision Electrical Works

Avaids Technovators Pvt. Ltd.

Vachan Electricals (P) Ltd