State Plan_2025_26_CARWSS to Thekkumkara and adj. villages_Supply, testing, erecting and commissioning of 315 KVA cast resin type outdoor transformer near RWPH, Vazhani and allied works _Vazhani_General Civil Work

Amount

Supply, Installation and commissioning of 315Kva Transformer

OD236253/2024-2025:Supply & Lying of 3Cx300 sq.mm. 11 KV XLPE power cable of best conductivity Al. conforming to IS. in ground or Existing Tray Make: Finolex/RR/KEI/Havels

OD236273/2024-2025:Supply & Termination of 3Cx300 sq.mm. 11KV OUTDOOR Termination conforming to IS. Make: Raychem/Multishrink/3M

OD236389/2024-2025:Supply & Termination of 3Cx300 sq.mm. 11KV INDOOR Termination conforming to IS.Make: Raychem/Multishrink/3M

OD236391/2024-2025:11KV /433V 315KVA Cast Resin Type Outdoor USSM 11KV/433V, 315KVA Cast Resin Transformer – Outdoor Manufacturing and Supply of 11kV/433V, 315KVA, 50Hz, 3phase, Vector Dyn 11 Resin Cast Outdoor Transformer with off circuit tapping +5% to -5% in steps of 2.5% with winding temperature indicator and hooter & LV side Cable box with MCCB and HV terminal connected to the 11kv VCB Panel with KSEBL Metering 11KV VCB Panel with HT Metering - Outdoor Manufacturing and Supply of Outdoor type 11kV, 630A, 26.3kA for 3 sec Horizontal Draw out VCB fitted with Manual/Motor operated spring charging mechanism with 230V AC motor and motor control switch, shunt trip coil of 24V DC, closing coil of 24V DC, Auxiliary Contact 2NO + 2NC, Mechanical ON/OFF indicator, mechanical operation counter, Anti pumping feature, overcurrent and earth fault relay, protection CT, (--/5 A, 5P10, 15VA , 11kV/110V, Cl-0.2, 25VA PT Instantaneous IDMT relay with Microprocessor based 3O/C + and 1EF Protection relay, Strip Heater with thermostat, Power pack 230V AC-24 V DC emergency OFF push button, Digital Ammeter & Digital Voltmeter etc and HT metering equipments (3nos *-/5A Resin cast CTs (ratio as per the Contract demand) & 1no 3 Phase 11KV/110V Resin Cast PT Unit) with Provision for fixing TOD Meter for KSEBL metering.

OD236393/2024-2025:SITC of EFR along with its control wiring and CT and enclosure. Make: EFR L&T and CT PGR/El Power

OD236424/2024-2025:Supply & Lying of 3.5Cx300 sq.mm. 415V XLPE power cable of best conductivity Al. conforming to IS. in ground or Existing Tray including its 4 Nos. terminations. Make: Finolex/RR/KEI/Havels

OD236430/2024-2025:Supply, testing and erection of installation of 75/5A, CL 0.5 P 10, 15VA Neutral with suitable metal enclosure (specification of N/CT will be change with actual load Details

OD236436/2024-2025:APFC PANEL-100Kvar Ultra Heavy Duty Capacitors Incomer: 250A TPN SFU with Fuse Outgoings:50Kvar Capacitor,125A TPN SFU with fuse and 70A contactor - 1No 20Kvar Capacitor 63A TP MCB with 32A Contactor - 1No 10Kvar Capacitor 32A TP MCB with 32A Contactor - 3Nos Make :L&T 6stage APFC Relay and Indicators

OD236438/2024-2025:Supply installation testing and commissioning of HT Unidirectional Meter 110v, 0-5ACL:0.2S with Accessories. Make:L&T

OD236441/2024-2025:Supply & providing efficient plate earthing arrangements as per IS 3043 using 1200x1200x12mm CI plate electrode, 12mm GI watering pipe clamped to the plate and extending to the middle of the plate, with necessary earth pit and filling around the plate 15cm with charcoal, sand and soil etc. as per IS 3043 ( No. of earth will be confirmed after the soil resistivity test.)

OD236445/2024-2025:Lying of 25*6 Gi Strip Earthing

OD236616/2024-2025:Supply and Lying of 10Swg Cu

OD236620/2024-2025:Supply and fixing of items Like Gloves Chart,Fire Buckets Etc

OD236621/2024-2025:Preparation of Scheme for approval and sanction from electrical inspectorate and KSEB Document Works. (Excluding all fees and other official charges)

Allied works

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)

100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.7.4:Welding 200mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.7.5:Grinding cut and weld edges of 200mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.4:Welding 250mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.12.9:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.

OD117807/2025-2026:Supply of 100 mm GI (Medium class)

OD117813/2025-2026:Cost of 100 mm GI specials (cost of 5% of GI pipes)

Electric Project Consultants (BID ID -2391512)

jafad vj (BID ID -2415945)

Bidder Name

Electric Project Consultants

jafad vj

TKM Infra Projects