Development of new A site Retail Outlet WITHIN 3 KM FROM UMMULONG TRAFFIC POINT TOWARDS NARTIANG ON NARTIANG KHANDULI ROAD WAHIAJER WEST JAINTIA HILLS MEGHALAYA under Guwahati DO

Subject: Development of new A site Retail Outlet "WITHIN 3 KM FROM UMMULONG TRAFFIC POINT TOWARDS NARTIANG ON NARTIANG KHANDULI ROAD", WAHIAJER, WEST JAINTIA HILLS, MEGHALAYA under Guwahati DOPIN CODE: 793151

Tender Ref. No.: MAC/ERO/37/2025-26/PT-87

e-Tender ID: 2026_ERO_189326_1

Bidder/Firm/Company Name:

Type of Firm (Please Select)

Name of DSC User for the subject Tender:

Son/Daughter of DSC User for the subject Tender:

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER 0

We confirm that we have quoted the rates in the tender considering Inter-alia the 1. Tender Document(s) 2. Additional Document(s) (if any) 3. BOQ Document (Price Bid Format) 4. Corrigendum (if any) 5. Pre Bid Meeting Minutes (if any)

We ………………………………………………………………………………………………………………………… (Name of the Tenderer) hereby certify that we have fully read and thoroughly understood the tender requirements and accept all terms and conditions of the tender including all corrigendum/addendum issued, if any. Our offer is in confirmation to all the terms and conditions of the tender including all corrigendum/addendum, if any and minutes of the pre-bid meeting. In the event of award of contract to us, the complete tender document shall be considered as part & parcel of the LOA/LOI/PO for constitution of Purchase Contract Agreement and also as & wherever applicable & required by IOCL.

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION 0

1 . No insolvency resolution process has commenced (viz. application has been admitted by Adjudicating Authority and moratorium has been imposed and IRP has been appointed) under Insolvency and Bankruptcy Code, 2016 or any other applicable law.

2(a) No insolvency resolution process or liquidation / bankruptcy proceeding is initiated under the Code or any other applicable law (in case where Code is not applicable).

2(b) Insolvency resolution process or liquidation / bankruptcy proceeding has been initiated under the Code or any other applicable law (in case where Code is not applicable) but application has neither been admitted by Adjudicating Authority nor moratorium has been imposed nor IRP has been appointed. I/We undertake to bring to the notice of IOCL immediately if such application is admitted by the Adjudicating Authority or moratorium has been imposed or IRP has been appointed. (Attach details of proceedings with technical bid).

3 . I / We undertake to bring to the notice of IOCL immediately if any proceedings under Insolvency and Bankruptcy Code, 2016 or any other applicable law are initiated or filed at any stage of evaluation of the tender.

4 . I / We are aware that we are not eligible to submit bid or our bid is liable to be cancelled in the event any insolvency resolution process has commenced (viz. application has been admitted by Adjudicating Authority and moratorium has been imposed and IRP has been appointed).

It is understood that if this declaration is found to be false, Indian Oil Corporation Ltd. shall have the right to reject my/our bid & forfeit the EMD / invoke BSD clauses and, if the bid has resulted in a contract, the contract will be liable for termination without prejudice to any other right or remedy (including blacklisting or holiday listing) available to Indian Oil Corporation Ltd.

ANNEXURE – C COMPLIANCE CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA 0

(A) The bidder, ………………………………………………………………………………………………………………………… is not from a country which shares a land border with India;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and are registered with the Competent Authority. Certificate of registration is attached with the bid;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and Government of India has extended lines of credit or is engaged in developmental projects in this country, ………………………………………………………………………………………………………… (Name of the Country) and hence do not require any separate registration for participation in this tender.

(B) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached).

(C) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached].

ANNEXURE – D UNDERTAKINGS AND DECLARATIONS FOR NON TAMPERING OF DATA 0

• I/We have not tampered or modified the subject tender document in any manner and before uploading, same has been cross-checked with documents hosted on your e-portal https://iocletenders.nic.in. In case, if same is found to be tampered/modified, I/We understand that my/our tender will be summarily rejected and EMD/SD may be forfeited and I am / We are liable to be banned from doing business with and/or prosecuted.

• I/We have not tampered or modified the subject tender document in any manner and before uploading, same has been cross-checked with documents hosted on your e-portal https://iocletenders.nic.in. In case, if same is found to be tampered/modified, I/We understand that my/our tender will be summarily rejected and EMD/SD may be forfeited and I am / We are liable to be banned from doing business with and/or prosecuted.

ANNEXURE – E DECLARATION OF BLACK LISTING / HOLIDAY LISTING 0

I/We are participating in the above referred Tender as:

I/We hereby declare that I/We are participating in the above referred Tender as 'Partnership Firm'

Complete Declaration shall appear here after you select any option from above i.e. 'Proprietary Concern' / 'Partnership Firm' / 'Company'.

Details given below:

It is understood that if this declaration is found to be false, IndianOil Corporation Ltd. shall have the right to reject my/our bid. If the tender has been finalized, the contract will be liable for termination without prejudice to any other right of remedy (including black listing or holiday listing) available to IndianOil Corporation Ltd.

ANNEXURE – F DETAILS OF RELATIONSHIP WITH IOCL’S DIRECTORS ETC. 1

(A) Name of the Tenderer

(B) Organizational Structure

D E C L A R A T I O N - `A'

(1). Residence Address

(2). Office Address

(3). State whether tenderer is related to any Director/(s) of the Indian Oil Corporation Limited

(3.1). If 'Yes' to (C), State the name of IOCL’s Director & Tenderer’s relationship with him/her (e.g. Abcd Efgh (Brother)).

D E C L A R A T I O N - `B'

(2). Name of Partners

Sl. No. Name(s)

(3). State whether any of the partners is a Director to the Indian Oil Corporation Limited

(3.1). If `Yes’ to 3, State the name(s) of IOCL’s Director

Sl. No. Name(s)

(4). State whether any of the partners is related to any of the Director(s) of the Indian Oil Corporation Limited

(4.1). If `Yes’ to 5, State the name(s) of IOCL’s Director & the Concerned partner’s relationship with him/her

Sl. No. Name(s)

D E C L A R A T I O N - `C'

(1). Registered Office Address

(2). Principal Office Address

(3). State whether the Company is Pvt. Ltd. Co. or Public Ltd. Co.

(4). Name of Directors of the Company

(5). State whether any of the Directors of the Tenderer Company is a Director of Indian Oil Corporation Limited

(5.1). If `Yes’ to 3, State the name(s) of IOCL’s Director

Sl. No. Name(s)

(6). State whether any of the Director of the Tenderer Company is related to any of the Director’s of the Indian Oil Corporation Limited

(6.1). If `Yes’ to (7), State the name(s) of IOCL’s Director & the concerned Director’s (of the tenderer Co.) relationship with him/her

Sl. No. Name(s)

D E C L A R A T I O N

I / We have not employed any retired Director and above rank officer of Indian Oil Corporation Ltd in their firm.

I / We have employed retired Director and above rank officer of Indian Oil Corporation Ltd in my/our firm as detailed below

(F) Sl. No. PARTICULARS DETAILS

1 Name of the Person

2 Post last held in IOC

3 Date of Retirement

4 Date of employment in the firm of Tenderer

ANNEXURE – G UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS 0

I/We hereby declare that I/We/M/s.

(A) We hereby confirm that we have not transferred our ownership rights either in whole or in part to another entity or under process of transfer.

I/We have transferred my/our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

I/We are in process of transferring my/ our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

(B) I/We understand that Indian Oil Corporation Limited (IOCL) reserves the right to reject the tender of any entity, which has transferred its ownership rights in whole or in part or which is in process of transfer without assigning any reason for such rejection.

(C) I/ We also understand that refusal or failure to share the information regarding the status of any kind of business transfer process/restructuring etc. in this tender or at any later stage, as applicable, my/our tender is liable to be rejected by IOCL and without prejudice to any other remedy or action available with IOCL, IOCL shall forfeit the Earnest Money Deposit provided by the tenderer, in any form whatsoever.

ANNEXURE – H PARTICULARS OF BIDDER FIRM 0

(A) Name of the Bidders Firm

(B) Type of Firm

(C) Name of Proprietor

Sl. No. Name(s)

(D) Proprietorship Declaration

(E) Details of shareholders of firm holding at least 10% of share capital (Applicable in case of company)

Sl. No. Name(s) Total No of Shares held % of total Voting share Capital

ANNEXURE – I UNDERTAKING ON NO MULTIPLE BIDDING 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare:

I. I/We have not submitted multiple bids. i.e., more than 1 bid either individually or in any combination of person (individual capacity, proprietor, affiliates, partnership, association of persons, Company).

II. I/We am aware that, in case found that such multiple bids are submitted, all such bids are liable for rejection.

Note: The submitted bids shall be considered as multiple bids as explained in "PART - B" of tender document.

ANNEXURE – J UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII) 0

UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII)

I ………………………………………………………………………………, son/daughter of ………………………………………………………………………………, do solemnly affirm and state as under:

(1). That I am the authorized signatory of M/s ……………………………………………………………………………… and I am duly authorized to furnish this undertaking declaration on behalf of M/s ………………………………………………………………………………

(2). That M/s ……………………………………………………………………………… has submitted its bid against bidding document of above Tender reference.

(3). That the Firm/Company is fully aware of the provisions of Public Procurement (Preference to Make in India) (PP-MII), Order 2017 and its amendments.

(4). We hereby confirm that our offer is achieving the minimum local content of:

Minimum 50% (>=50%)

Deemed Class-II Local Supplier (As per Clause 2A of PP-MII Order Revision Dated 19.07.2024. I confirm that we are manufacturing the tendered item under PLI Scheme and have received incentive from concerned PLI ministry. This declaration is being made within the specific time period only, as notified by concerned PLI Ministry)

(5). Details of location(s) where the local value addition is made

(6). I confirm that I am aware of the implication of the above undertaking and our liability on account of wrong declaration.

Note: 1. This undertaking shall be certified by the authorized signatory of the bidder. Authorised signatory shall mean a) The Proprietor in case of a proprietorship firm. b) Any one of the partners having POA in case of a partnership firm. c) Power of Attorney holder in case of a company.

2. Preference is applicable only for suppliers claiming minimum 50 % Local Content.

ANNEXURE – K BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare that in the event:

I / We withdraw / modify our bid during the period of bid validity

I / We commit any other breach of tender conditions / contract which would have otherwise attracted forfeiture of EMD

I / We fail to / refuse to initiate the execution of the awarded Contract as per the terms of the Contract

then I / We could be debarred from being eligible for bidding / award of all future tender(s) of Indian Oil Corporation Limited for a period of SIX Months from the date of communication of such debarment.

Annexure Name Description Submission Status

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER NOT Submitted 0

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION NOT Submitted 0

ANNEXURE – C CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA NOT Submitted 0

ANNEXURE – D UNDERTAKINGS AND DECLARATIONS FOR NON TAMPERING OF DATA NOT Submitted 0

ANNEXURE – E DECLARATION OF BLACK LISTING / HOLIDAY LISTING NOT Submitted 0

ANNEXURE – F DECLARATION "A", "B", "C" & "D" NOT Submitted 0

ANNEXURE – G UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS NOT Submitted 0

ANNEXURE – H PARTICULARS OF BIDDER FIRM NOT Submitted 0

ANNEXURE – I UNDERTAKING ON NO MULTIPLE BIDDING NOT Submitted 0

ANNEXURE – J UNDERTAKING ON PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA (PP-MII) NOT Submitted 0

ANNEXURE – K BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD NOT Submitted 0

STATEMENT OF CREDENTIAL & BID SUBMISSION CHECKLIST

Development of new A site Retail Outlet "WITHIN 3 KM FROM UMMULONG TRAFFIC POINT TOWARDS NARTIANG ON NARTIANG KHANDULI ROAD", WAHIAJER, WEST JAINTIA HILLS, MEGHALAYA under Guwahati DO. PIN CODE: 793151

Note: 1.Bidders have to submit duly filled Statement of Credentials. Data is to be filled by the Bidders only in WHITE coloured cells. 2. Necessary supporting documents to be enclosed. 3. Corporation reserves the right to assess the bidder’s capacity and capability if necessary by visiting/ inspecting recently executed / under execution of works.

S N Particulars Details Uploaded:

(A) General Information

1 Name of the bidder:

2 Address of the Bidder

3 Login E-Mail id for portal

4 Correspondence E-Mail id as per portal

5 Name of Contact Person:

6 Contact Person's Mobile no -

7 Company details: Type of Firm

8 Copy of PAN card (For Indian bidders / Indian Agents of Foreign Bidders)

9 Copy of GST Registration (For Indian bidders / Indian Agents of Foreign Bidders)

10 Copy of PF registration

11 Partnership deed (For Indian bidders – The deed should be registered with Registrar of Firms)

Certificate of Incorporation with memorandum and articles of Association (as applicable for partnership firms and companies)

1 Earnest Money Deposit Instrument Ref:

(C) PQC Documents

2 Turn Over Criteria (In Rs.)

2.1 FY 2024-25 UDIN no.:

2.2 FY 2023-24 UDIN no.:

2.3 FY 2022-23 UDIN no.:

3 Similar Work: Work completed by the bidder, as main contractor, or as sub-contractor, during last seven years ending last day of month previous to the original end date of bid submission. The value of completed work for evaluation shall be considered as under:

3.1 1st Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

3.2 2nd Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

3.3 3rd Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

(D) OTHER ESSENTIAL COMMERCIAL CRITERIA:

1 Copy of PAN card (For Indian bidders / Indian Agents of Foreign Bidders)

2 Copy of GST Registration (For Indian bidders / Indian Agents of Foreign Bidders)

3 Copy of PF registration

4 Power of Attorney / Authority of the person uploading the bids / Board Resolution along with

a) Certificate of incorporation (COI), Memorandum of Association (MOA) and Articles of Association (AOA) in case of Company. Or

b) Partnership Deed, Or

c) Declaration of sole proprietor

(E) OTHER DOCUMENTS:

1 Acceptance of all terms & conditions of tenderer- Annexure ‘A’ of Technical Bid Part-B.

2 Declaration on Proceedings Under Insolvency and Bankruptcy Code, 2016 (Bidding Stage)- Annexure ‘B’ of Technical Bid Part-B.

3 Compliance Certificate for bidders from a country which shares a land border with India- Annexure ‘C’ of Technical Bid Part-B.

4 Undertakings and declarations for non-tampering of data- Annexure ‘D’ of Technical Bid Part-B.

5 Declaration of blacklisting / holiday listing clearly mentioning the details of Holiday listing or "NIL" in case of no details - Annexure ‘E’ of Technical Bid Part-B.

6 Details on Relationship with IOCL's Directors (Declaration "A", "B", "C" & "D") - Annexure ‘F’ of Technical Bid Part-B.

7 Undertaking for business transaction status of bidders- Annexure ‘G’ of Technical Bid Part-B.

8 Particulars of bidder firm- Annexure ‘H’ of Technical Bid Part-B.

9 Undertaking on no multiple bidding- Annexure ‘I’ of Technical Bid Part-B.

10 Declaration for availing Purchase Preference on purchase preference (PP-MII) policy) – Bid Stage - Annexure ‘J (Part-I)’ of Technical Bid Part-B.

11 Declaration on purchase preference (linked with local content) (PP-MII) policy- Annexure ‘J (Part-II)’ of Technical Bid Part-B.

Percentage BoQ NQ

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par (=) Not Quoted Select Excess (+) Less (-) At Par (=)

Tender Inviting Authority: General Manager I/c (Materials & Contract), Eastern Regional Office

Name of Work: Development of new A site Retail Outlet "WITHIN 3 KM FROM UMMULONG TRAFFIC POINT TOWARDS NARTIANG ON NARTIANG KHANDULI ROAD", WAHIAJER, WEST JAINTIA HILLS, MEGHALAYA

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Qty Units Estimated Rate IN Rs. P. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P GST PERCENT (%) Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 LAND DEVELOPMENT item_code_1

2 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth within premises item_code_2 M2 Excess(+) Full Conversion INR

3 CONSTRUCTION OF SALES BUILDING item_code_3

4 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_4

5 i) All kinds of Soil item_code_5 M3 Excess(+) Full Conversion INR

6 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_6 M3 Excess(+) Full Conversion INR

7 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_7 M3 Excess(+) Full Conversion INR

8 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_8

9 i) Local Fine Sand within grading zone IV item_code_9 M3 Excess(+) Full Conversion INR

10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item_code_10 M2 Excess(+) Full Conversion INR

11 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_11 M2 Excess(+) Full Conversion INR

12 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_12

13 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_13 M3 Excess(+) Full Conversion INR

14 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_14 M3 Excess(+) Full Conversion INR

15 viii) 1:4:8(1 Cement :4 Coarse Sand :8 Graded stone aggregate of 40mm) item_code_15 M3 Excess(+) Full Conversion INR

16 Centering and shuttering including strutting, propping etc. and removal of form work for: item_code_16

17 i) Foundations,footings,bases of column item_code_17 M2 Excess(+) Full Conversion INR

18 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_18

19 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_19 M3 Excess(+) Full Conversion INR

20 Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : item_code_20

21 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_21 M3 Excess(+) Full Conversion INR

22 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) item_code_22 M3 Excess(+) Full Conversion INR

23 Providing and laying RCC work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). item_code_23 M3 Excess(+) Full Conversion INR

24 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_24

25 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_25 M2 Excess(+) Full Conversion INR

26 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item_code_26 M2 Excess(+) Full Conversion INR

27 vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards item_code_27 M2 Excess(+) Full Conversion INR

28 viii) Suspended floors, roofs,landings balconies and access platform with water proof ply 12mm thick item_code_28 M2 Excess(+) Full Conversion INR

29 ix) Lintels, beams, plinth beams, girders, bressumers cantilevers and with water proof ply 12mm thick item_code_29 M2 Excess(+) Full Conversion INR

30 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_30

31 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_31 KG Excess(+) Full Conversion INR

32 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_32

33 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_33 M3 Excess(+) Full Conversion INR

34 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_34 M2 Excess(+) Full Conversion INR

35 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_35 M2 Excess(+) Full Conversion INR

36 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_36 KG Excess(+) Full Conversion INR

37 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover item_code_37 M2 Excess(+) Full Conversion INR

38 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement item_code_38 M2 Excess(+) Full Conversion INR

39 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item_code_39 M2 Excess(+) Full Conversion INR

40 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item_code_40 M2 Excess(+) Full Conversion INR

41 Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified item_code_41

42 i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 item_code_42 M2 Excess(+) Full Conversion INR

43 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item_code_43

44 iv) Granite of any colour and shade having Area of slab over 0.50 sqm item_code_44 M2 Excess(+) Full Conversion INR

45 25mm Thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) item_code_45 M2 Excess(+) Full Conversion INR

46 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item_code_46

47 ii) 110 mm diameter item_code_47 M- Excess(+) Full Conversion INR

48 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_48

49 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_49 M2 Excess(+) Full Conversion INR

50 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item_code_50

51 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) item_code_51 M2 Excess(+) Full Conversion INR

52 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item_code_52 M2 Excess(+) Full Conversion INR

53 Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at 17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete. item_code_53 M2 Excess(+) Full Conversion INR

54 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_54 M2 Excess(+) Full Conversion INR

55 Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm) item_code_55 M2 Excess(+) Full Conversion INR

56 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item_code_56 M2 Excess(+) Full Conversion INR

57 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_57 M2 Excess(+) Full Conversion INR

58 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. item_code_58 EA Excess(+) Full Conversion INR

59 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: item_code_59

60 i) W.C. pan with ISI marked white solid plastic seat and lid item_code_60 EA Excess(+) Full Conversion INR

61 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : item_code_61

62 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item_code_62 EA Excess(+) Full Conversion INR

63 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : item_code_63

64 i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps item_code_64 EA Excess(+) Full Conversion INR

65 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item_code_65 EA Excess(+) Full Conversion INR

66 Providing and fixing toilet paper holder : item_code_66

67 i) C.P. brass item_code_67 EA Excess(+) Full Conversion INR

68 Providing and fixing soil, waste and vent pipes : item_code_68

69 i) 100mm dia Sand cast iron S&S pipe as per IS: 1729. item_code_69 M- Excess(+) Full Conversion INR

70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall item_code_70

71 i) 15 mm nominal outer dia Pipes item_code_71 M- Excess(+) Full Conversion INR

72 ii) 20 mm nominal outer dia Pipes item_code_72 M- Excess(+) Full Conversion INR

73 iii) 25 mm nominal outer dia Pipes item_code_73 M- Excess(+) Full Conversion INR

74 v) 40 mm nominal outer dia Pipes item_code_74 M- Excess(+) Full Conversion INR

75 Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall. item_code_75

76 ii) 20 mm nominal outer dia Pipes item_code_76 M- Excess(+) Full Conversion INR

77 iii) 25 mm nominal outer dia Pipes item_code_77 M- Excess(+) Full Conversion INR

78 Providing and fixing brass bib cock of approved quality : item_code_78

79 i) 15 mm nominal bore item_code_79 EA Excess(+) Full Conversion INR

80 Providing and fixing brass stop cock of approved quality : item_code_80

81 i) 15 mm nominal bore item_code_81 EA Excess(+) Full Conversion INR

82 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : item_code_82

83 i) 25 mm nominal bore item_code_83 EA Excess(+) Full Conversion INR

84 iii) 40 mm nominal bore item_code_84 EA Excess(+) Full Conversion INR

85 Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : item_code_85

86 i) 100mm inlet & 100mm outlet SCI S&S as per IS - 3989. item_code_86 EA Excess(+) Full Conversion INR

87 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item_code_87 L- Excess(+) Full Conversion INR

88 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) item_code_88

89 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item_code_89 KG Excess(+) Full Conversion INR

90 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item_code_90 KG Excess(+) Full Conversion INR

91 Providing and fixing panelling or panelling and glazing in panelled or panelled & glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : item_code_91

92 ii) 12mm thick particle board with Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, Grade I item_code_92 M2 Excess(+) Full Conversion INR

93 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): item_code_93

94 ii) With float glass panes of 5.0 mm thickness (weight not less than 12.5kg/sqm) item_code_94 M2 Excess(+) Full Conversion INR

95 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item_code_95

96 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_96 KG Excess(+) Full Conversion INR

97 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item_code_97 M2 Excess(+) Full Conversion INR

98 Providing & fixing chromium plated brass 100mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality). item_code_98 EA Excess(+) Full Conversion INR

99 Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : item_code_99

100 i) 250x10 mm item_code_100 EA Excess(+) Full Conversion INR

101 ii) 200x10 mm item_code_101 EA Excess(+) Full Conversion INR

102 Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : item_code_102

103 i) 125 mm item_code_103 EA Excess(+) Full Conversion INR

104 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. item_code_104

105 i) With stainless steel cover plate minimum 1.25 mm thickness item_code_105 EA Excess(+) Full Conversion INR

106 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge. item_code_106

107 i) Powder coated minimum thickness 50 micron aluminium tubular handle bar item_code_107 EA Excess(+) Full Conversion INR

108 Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge item_code_108

109 i) Non Decorative finish item_code_109 M2 Excess(+) Full Conversion INR

110 CONSTRUCTION OF SEPTIC TANK & SOAK PIT item_code_110

111 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_111

112 i) All kinds of Soil item_code_112 M3 Excess(+) Full Conversion INR

113 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_113 M2 Excess(+) Full Conversion INR

114 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_114

115 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_115 M3 Excess(+) Full Conversion INR

116 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_116

117 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item_code_117 M2 Excess(+) Full Conversion INR

118 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_118

119 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_119 KG Excess(+) Full Conversion INR

120 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_120

121 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_121 M3 Excess(+) Full Conversion INR

122 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_122

123 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_123 M2 Excess(+) Full Conversion INR

124 Providing Neat cement punning item_code_124 M2 Excess(+) Full Conversion INR

125 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_125

126 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_126 M2 Excess(+) Full Conversion INR

127 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 item_code_127 EA Excess(+) Full Conversion INR

128 CONST. OF Catch Water Drain item_code_128

129 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_129

130 i) All kinds of Soil item_code_130 M3 Excess(+) Full Conversion INR

131 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_131 M2 Excess(+) Full Conversion INR

132 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_132

133 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_133 M3 Excess(+) Full Conversion INR

134 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_134

135 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_135 M2 Excess(+) Full Conversion INR

136 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_136

137 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_137 KG Excess(+) Full Conversion INR

138 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_138

139 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_139 M3 Excess(+) Full Conversion INR

140 Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required. item_code_140 KG Excess(+) Full Conversion INR

141 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item_code_141

142 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) item_code_142 M2 Excess(+) Full Conversion INR

143 Providing Neat cement punning item_code_143 M2 Excess(+) Full Conversion INR

144 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item_code_144

145 ii) 110 mm diameter item_code_145 M- Excess(+) Full Conversion INR

146 CONSTRUCTION OF DRIVEWAY, APPROACH & BUFFER STRIP item_code_146

147 Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired density, complete as per specification & direction of Engineer-in-charge. item_code_147

148 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item_code_148 M3 Excess(+) Full Conversion INR

149 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item_code_149 M3 Excess(+) Full Conversion INR

150 Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) item_code_150

151 ii) M40 grade 80 mm thick reflective type Lacquered finish item_code_151 M2 Excess(+) Full Conversion INR

152 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_152

153 i) All kinds of Soil item_code_153 M3 Excess(+) Full Conversion INR

154 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_154 M2 Excess(+) Full Conversion INR

155 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_155

156 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_156 M3 Excess(+) Full Conversion INR

157 Centering and shuttering including strutting, propping etc. and removal of form work for: item_code_157

158 i) Foundations,footings,bases of column item_code_158 M2 Excess(+) Full Conversion INR

159 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_159

160 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_160 M3 Excess(+) Full Conversion INR

161 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_161

162 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_162 M2 Excess(+) Full Conversion INR

163 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_163

164 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_164 KG Excess(+) Full Conversion INR

165 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_165

166 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_166 M3 Excess(+) Full Conversion INR

167 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_167

168 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_168 M2 Excess(+) Full Conversion INR

169 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/perlite respectively conforming to IS:2547 (Part - I & II), applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : item_code_169 M2 Excess(+) Full Conversion INR

170 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_170 M2 Excess(+) Full Conversion INR

171 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_171 M2 Excess(+) Full Conversion INR

172 CONSTRUCTION OF CANOPY OF 14M*9M SIZE item_code_172

173 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_173

174 i) All kinds of Soil item_code_174 M3 Excess(+) Full Conversion INR

175 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_175

176 i) Local Fine Sand within grading zone IV item_code_176 M3 Excess(+) Full Conversion INR

177 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_177 M2 Excess(+) Full Conversion INR

178 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_178

179 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_179 M3 Excess(+) Full Conversion INR

180 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_180

181 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_181 M2 Excess(+) Full Conversion INR

182 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_182

183 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_183 KG Excess(+) Full Conversion INR

184 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item_code_184

185 v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate item_code_185 EA Excess(+) Full Conversion INR

186 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item_code_186 EA Excess(+) Full Conversion INR

187 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty item_code_187

188 ii) 150 mm dia. R.C.C. pipe item_code_188 M- Excess(+) Full Conversion INR

189 iv) 300 mm dia. R.C.C. pipe item_code_189 M- Excess(+) Full Conversion INR

190 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_190

191 iv) Pipes, Cable etc. > 80mm < 300m dia item_code_191 M- Excess(+) Full Conversion INR

192 Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) /Super Durable Polyester (SDP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP /SDP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP/SDP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge. item_code_192

193 ii) Plain Sheet for Ridges (500 - 600mm). item_code_193 M- Excess(+) Full Conversion INR

194 iii) Plain sheet for Flashings/ Aprons (Upto 600 mm) item_code_194 M- Excess(+) Full Conversion INR

195 iv) Plain Sheet for Gutter (600 mm over all girth) item_code_195 M- Excess(+) Full Conversion INR

196 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item_code_196

197 iii) 160 mm diameter item_code_197 M- Excess(+) Full Conversion INR

198 Providing & fixing BARE Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.55 mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge. item_code_198 M2 Excess(+) Full Conversion INR

199 Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of Cold rolled steel sheet conforming to IS 513, having minimum yield stress and tensile stress as 240 Mpa & 300 Mpa respectively. Base metal thickness for ceiling panel and Carriers shall be 0.45mm and 0.55mm respectively. The steel surface shall have hot dip metallic coated with Zinc coating (galvanizing) as per IS277, with total mass of coating on both sides shall be 120 gms/sqm. The steel shall have organic coating with Regular Modified Polyester (RMP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns RMP paint, over 5-7 microns epoxy primer) and back side 8-10 Microns RMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.50 MM for Ceiling panel and 0.60 MM for Carrier. Sheet shall have protective Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m (for panel) and up to 5m (for carrier) or as desired by Engineer-in-charge. The ceiling panel shall be clipped into carriers which are suspended from steel trusses/purlins with the help of GI suspension angle of size 25x25x0.5mm thick by means of rigid suspension system meant for exterior. The longitudinal joints of two panels shall be butt joined with a special type of panel splice to be fixed from inner side. The carrier will be joined with carrier splices maintaining a module of 150 mm. The spans shall not exceed as recommended and manufacturer recommendations shall be followed on installation procedure. item_code_199 M2 Excess(+) Full Conversion INR

200 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_200 KG Excess(+) Full Conversion INR

201 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_201

202 iii) 3 Core x 1.5 sq. mm. (copper) item_code_202 M- Excess(+) Full Conversion INR

203 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_203 M- Excess(+) Full Conversion INR

204 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_204

205 vii) 3 Core x 2.5 sq. mm item_code_205 EA Excess(+) Full Conversion INR

206 Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing. item_code_206

207 i) For cables 2.5 to 4 sqmm XLPE / AYFY item_code_207 EA Excess(+) Full Conversion INR

208 S/F Under Canopy recess mounted Linear LED Lights item_code_208 EA Excess(+) Full Conversion INR

209 CONSTRUCTION OF SINGLE SIDED HOARDING item_code_209

210 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_210

211 i) All kinds of Soil item_code_211 M3 Excess(+) Full Conversion INR

212 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_212 M3 Excess(+) Full Conversion INR

213 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_213 M2 Excess(+) Full Conversion INR

214 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_214

215 ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm) item_code_215 M3 Excess(+) Full Conversion INR

216 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_216

217 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_217 M2 Excess(+) Full Conversion INR

218 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_218 KG Excess(+) Full Conversion INR

219 Painting on G.S. sheet with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade, 2 or more coats,including a coat of approved steel primer but excluding a coat of mordant solution item_code_219 M2 Excess(+) Full Conversion INR

220 Centering and shuttering including strutting, propping etc. and removal of form work for: item_code_220

221 i) Foundations,footings,bases of column item_code_221 M2 Excess(+) Full Conversion INR

222 Supply and fixing of 30 W LED (Light Emitting Diode) light fixture with fittings and accessories for hoarding light purposes having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item_code_222 EA Excess(+) Full Conversion INR

223 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_223

224 vi) 3 Core x 1.5 sq. mm. item_code_224 EA Excess(+) Full Conversion INR

225 vii) 3 Core x 2.5 sq. mm item_code_225 EA Excess(+) Full Conversion INR

226 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_226

227 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_227 M- Excess(+) Full Conversion INR

228 i) 2 Core x 1.5 sq. mm. (copper) item_code_228 M- Excess(+) Full Conversion INR

229 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item_code_229

230 v) 25 x 3 mm GI strip item_code_230 M- Excess(+) Full Conversion INR

231 Supply & fixing of weatherproof 125 mm dia junction box (4 way entry) of BALIGA/CEAG-FCG/FLEXPRO/FEPL make including clamping arrangement, all complete as per specification & direction of Engineer In-charge. item_code_231 EA Excess(+) Full Conversion INR

232 TRANSPORTATION AND INSTALLATION OF TANKS item_code_232

233 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item_code_233

234 iii) 15/20 KL Tank with fittings : 0 - 30 Km item_code_234 LS Excess(+) Full Conversion INR

235 iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km item_code_235 KM Excess(+) Full Conversion INR

236 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20 item_code_236

237 iv) In brick masonry pit with RCC matt under driveway including RCC top slab as per standard Drg. ENG/318. Manhole cover plates and frame to be paid separately . item_code_237 LS Excess(+) Full Conversion INR

238 Supply and Laying of 50 mm dia single wall flexible piping system comprising of Non-metallic HDPE (flexible) pipelines as per IOCL specifications and with manufacturer supplied fittings including all bends, tees, elbows, reducers, end connectors at DU & tank side etc and as required for complete underground piping job. The joints in the pipelines, except the end connections at tanks and dispensers shall be made by electro-fusion welding. The pipes shall be suitable for use with petroleum and ethanol blended fuels. The maximum operating pressure shall be 7Kg/sq.cm. Note: The make of HDPE Pipe should be CCOE approved. Pressure testing shall be done before the final backfilling. The civil works for installation viz. excavation, sand filling & back filling etc. shall be paid seperately. All metallic parts in the piping system shall be grounded as per the requirements of EN14125. item_code_238 M- Excess(+) Full Conversion INR

239 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_239

240 i) Local Fine Sand within grading zone IV item_code_240 M3 Excess(+) Full Conversion INR

241 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item_code_241 EA Excess(+) Full Conversion INR

242 Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve item_code_242

243 iii) S/I Screwed type GM Ball Valve of 50 mm dia item_code_243 EA Excess(+) Full Conversion INR

244 Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein item_code_244

245 iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein item_code_245 EA Excess(+) Full Conversion INR

246 Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. item_code_246

247 i) Making Flange joint between Slip on,blind and flange etc.of 100mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding item_code_247 EA Excess(+) Full Conversion INR

248 Supplying and installation of the following threaded coupling item_code_248

249 i) 80 mm dia Aluminium camlock coupling - Male only item_code_249 EA Excess(+) Full Conversion INR

250 Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends. item_code_250

251 i) Supply & installation of U type CS bend on vent pipe of 80 mm dia item_code_251 EA Excess(+) Full Conversion INR

252 Providing stainless steel wire mesh 32 SWG, 11 mesh per linear cm of of non corrosive metal in two layers on existing vent hoods ‘U’ type (on both ends) including brazing, etc. complete item_code_252

253 i) 32SWG SS wire mesh both sides of existing U vent hood 80mm dia item_code_253 EA Excess(+) Full Conversion INR

254 Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval. item_code_254 EA Excess(+) Full Conversion INR

255 Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping item_code_255

256 ii) S/L Welded U/G HD MS Pipes of 80mm dia with fittings,doping item_code_256 M- Excess(+) Full Conversion INR

257 iii) S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping item_code_257 M- Excess(+) Full Conversion INR

258 iii) S/L Threaded A/G HD MS Pipes of 50 mm dia with fittings,Painting item_code_258 M- Excess(+) Full Conversion INR

259 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_259 M2 Excess(+) Full Conversion INR

260 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_260 M2 Excess(+) Full Conversion INR

261 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_261 KG Excess(+) Full Conversion INR

262 Providing and fixing of lifting handle foot lever for use with flat sealed cover and trench panels of OPW Fiberlite or equivalent make make as per specification and direction of Engineer in charge. item_code_262 EA Excess(+) Full Conversion INR

263 CONSTRUCTION OF PUMP ISLAND & DU INSTALLATION item_code_263

264 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item_code_264

265 xi) MPD/MPP pumps upto 2 nos., 0-30 Km item_code_265 LS Excess(+) Full Conversion INR

266 xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km item_code_266 KM Excess(+) Full Conversion INR

267 vii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km item_code_267 LS Excess(+) Full Conversion INR

268 viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km item_code_268 KM Excess(+) Full Conversion INR

269 Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump item_code_269

270 i) 2 product - 4 nozzle MPPs/MPDs item_code_270 EA Excess(+) Full Conversion INR

271 Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge item_code_271 EA Excess(+) Full Conversion INR

272 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_272

273 i) All kinds of Soil item_code_273 M3 Excess(+) Full Conversion INR

274 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_274

275 i) Local Fine Sand within grading zone IV item_code_275 M3 Excess(+) Full Conversion INR

276 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_276 M2 Excess(+) Full Conversion INR

277 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_277

278 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_278 M3 Excess(+) Full Conversion INR

279 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_279 M3 Excess(+) Full Conversion INR

280 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_280

281 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_281 M2 Excess(+) Full Conversion INR

282 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_282

283 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_283 M3 Excess(+) Full Conversion INR

284 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_284 M2 Excess(+) Full Conversion INR

285 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item_code_285

286 iv) Granite of any colour and shade having Area of slab over 0.50 sqm item_code_286 M2 Excess(+) Full Conversion INR

287 Supplying and fixing of 10mm thick mirror polished black granite tiles for pump island edges etc. over 12mm thick CM 1:4 including cost of all materials and labour etc. complete. item_code_287 M2 Excess(+) Full Conversion INR

288 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_288

289 iii) 3 Core x 1.5 sq. mm. (copper) item_code_289 M- Excess(+) Full Conversion INR

290 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_290 M- Excess(+) Full Conversion INR

291 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_291

292 vi) 3 Core x 1.5 sq. mm. item_code_292 EA Excess(+) Full Conversion INR

293 vii) 3 Core x 2.5 sq. mm item_code_293 EA Excess(+) Full Conversion INR

294 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item_code_294

295 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_295 M- Excess(+) Full Conversion INR

296 CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings. item_code_296

297 iii) 500VA CVT item_code_297 EA Excess(+) Full Conversion INR

298 iv) 5KVA stabilizer item_code_298 EA Excess(+) Full Conversion INR

299 PROVIDING INTERNAL WIRING item_code_299

300 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_300 EA Excess(+) Full Conversion INR

301 Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long item_code_301 EA Excess(+) Full Conversion INR

302 Supply and Installation of 16 SWG MS/GI powder coated weather proof Earthing Box of following size with door and locking arrangement with lock and key. Box to be mounted on ISA 40x40x5 (Painted with black synthetic enamel paint) frame having 2 legs of length 800 mm (500 mm above ground and 300 mm below ground which is to be grouted with PCC 1:2:4). Bottom of box should have opening for incoming earth GI strips all complete, as per specification and direction of Engineer-in-charge. Note: EARTHING BOX in RED should be boldly written over the box. The box should have a hood at the top extending outwards such that no water should seep through inside the box during rainy season to avoid rusting. item_code_302

303 i) 50 x 10mm G.I. Strip item_code_303 M- Excess(+) Full Conversion INR

304 ii) 32 x 6 mm G.I.strip item_code_304 M- Excess(+) Full Conversion INR

305 v) 25 x 3 mm GI strip item_code_305 M- Excess(+) Full Conversion INR

306 PROVISION OF ELECTRIC PANEL & ALLIED ELECTRICAL WORKS item_code_306

307 PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032. item_code_307

308 Medium RO, Standard drawing No. ENG/IOCL/PDIL-2. List of Componets are: (a) 1 No. MCCB (3P+N) of 100 A, 35 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-100A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 100 A, Manually Operated Change over switch suitable for connection of Mains supply and 30 KVA DG Set /5 KW Solar system with required No. of MCCB (100 A,35 KA,3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 100A, 35 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 100/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 125 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 9 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA & 3 Nos DP MCB of 20 A, 10 KA in outgoing Feeder-2 (n) 3 Nos DP MCB of 16 A, 10 KA & 6 Nos DP MCB of 20 A, 10 KA in outgoing Feeder-3 (o) 8 Nos TP MCB of 16 A, 10 KA & 1 Nos TP MCB of 25 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL. item_code_308 EA 209147.12 Excess(+) Full Conversion INR

309 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_309

310 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item_code_310 M- Excess(+) Full Conversion INR

311 PROVIDING INTERNAL WIRING item_code_311

312 i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_312 EA Excess(+) Full Conversion INR

313 Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete. item_code_313

314 i) Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. item_code_314 M- Excess(+) Full Conversion INR

315 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item_code_315

316 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item_code_316 M- Excess(+) Full Conversion INR

317 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_317 M- Excess(+) Full Conversion INR

318 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item_code_318 M- Excess(+) Full Conversion INR

319 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item_code_319 M- Excess(+) Full Conversion INR

320 SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. item_code_320

321 iii) 4 module frame item_code_321 EA Excess(+) Full Conversion INR

322 viii) 15 A Modular switch item_code_322 EA Excess(+) Full Conversion INR

323 xii) Fan Regulator of stepped modular type item_code_323 EA Excess(+) Full Conversion INR

324 Supply and Installation of Flame Proof ESD Push Button item_code_324 EA Excess(+) Full Conversion INR

325 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: item_code_325

326 iii) 1200 mm sweep item_code_326 EA Excess(+) Full Conversion INR

327 EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). item_code_327

328 ii) 9" dia light duty, make Khaitan or equivalent item_code_328 EA Excess(+) Full Conversion INR

329 Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works: item_code_329

330 iii) Horizontal air compressor Assembly of 5 HP (160-220 LITRES) including civil works item_code_330 EA Excess(+) Full Conversion INR

331 Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.) item_code_331 EA Excess(+) Full Conversion INR

332 Supplying and fixing of MV Lightining Arrestor horn gap type as required item_code_332 EA Excess(+) Full Conversion INR

333 Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip i/c cost of 1 no. crocodile clip (for tanker earthing & other job) item_code_333 EA Excess(+) Full Conversion INR

334 Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc item_code_334

335 i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. item_code_335 M2 Excess(+) Full Conversion INR

336 iv) 11 KV grade hand gloves, ISI mark item_code_336 EA Excess(+) Full Conversion INR

337 Formation of lighting protection arrangement with supply of 1.0 M height spike and erection at top most portion of structure/building and connecting the same to earthpit by 40x6mm GI strip (excluding supply and laying of GI strip) item_code_337 EA Excess(+) Full Conversion INR

338 SUPPLY AND INSTALLATION OF YARD LIGHTS item_code_338

339 Supply & laying of Heavy Duty type, High compression strength, IP 67 rated (DWC) Double wall corrugated HDPE Conduits as per IS:14930/ IS:16205. Laying includes with GI pull wires inside the conduits & necessary ends to be filled with sealants, of all complete and as per drawing & specification. item_code_339

340 ii) 63 mm OD / 50 mm ID item_code_340 M- Excess(+) Full Conversion INR

341 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_341

342 iv) Pipes, Cable etc. > 80mm < 300m dia item_code_342 M- Excess(+) Full Conversion INR

343 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item_code_343 EA Excess(+) Full Conversion INR

344 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_344

345 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_345 M- Excess(+) Full Conversion INR

346 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item_code_346 M- Excess(+) Full Conversion INR

347 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_347

348 vii) 3 Core x 2.5 sq. mm item_code_348 EA Excess(+) Full Conversion INR

349 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item_code_349

350 v) 25 x 3 mm GI strip item_code_350 M- Excess(+) Full Conversion INR

351 OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) : item_code_351

352 i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item_code_352 EA Excess(+) Full Conversion INR

353 iii) S/E of 5 Meter high galvanised Octagonal pole with top 60mm(A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item_code_353 EA Excess(+) Full Conversion INR

354 Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete. item_code_354

355 ii) S/E Arm " Y " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge item_code_355 EA Excess(+) Full Conversion INR

356 Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge. item_code_356

357 i) "Y" Pole item_code_357 EA Excess(+) Full Conversion INR

358 ii) "L" Pole item_code_358 EA Excess(+) Full Conversion INR

359 Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item_code_359 EA Excess(+) Full Conversion INR

360 i) All kinds of Soil item_code_360 M3 Excess(+) Full Conversion INR

361 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_361 M2 Excess(+) Full Conversion INR

362 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_362

363 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_363 M3 Excess(+) Full Conversion INR

364 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_364

365 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_365 M2 Excess(+) Full Conversion INR

366 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_366

367 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_367 KG Excess(+) Full Conversion INR

368 STANDARD DISPLAY BOARD-EGRESS SIDE item_code_368

369 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_369

370 i) All kinds of Soil item_code_370 M3 Excess(+) Full Conversion INR

371 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_371 M3 Excess(+) Full Conversion INR

372 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying & curing, excluding the cost of centering, shuttering finishing including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge, ALL WORKS UPTO PLINTH LEVEL. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. item_code_372

373 i) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum item_code_373 M3 Excess(+) Full Conversion INR

374 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_374

375 i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm item_code_375 M3 Excess(+) Full Conversion INR

376 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_376

377 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_377 M2 Excess(+) Full Conversion INR

378 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_378

379 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_379 KG Excess(+) Full Conversion INR

380 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item_code_380

381 i) 12mm dia x 300mm long with 75 mm dia x 3 mm thick plate item_code_381 EA Excess(+) Full Conversion INR

382 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item_code_382

383 i) Hot finished welded type tubes item_code_383 KG Excess(+) Full Conversion INR

384 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item_code_384

385 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_385 KG Excess(+) Full Conversion INR

386 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_386 M2 Excess(+) Full Conversion INR

387 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_387

388 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_388 M- Excess(+) Full Conversion INR

389 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_389

390 i) Pipes,cables etc. not exceeding 80mm dia item_code_390 M- Excess(+) Full Conversion INR

391 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_391

392 vii) 3 Core x 2.5 sq. mm item_code_392 EA Excess(+) Full Conversion INR

393 Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes. item_code_393

394 i) for 2.5 sq.mm. cable entry size with 9 terminals item_code_394 EA Excess(+) Full Conversion INR

395 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item_code_395

396 ii) 2+8 way SPN item_code_396 EA Excess(+) Full Conversion INR

397 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item_code_397

398 ii) Upto 32A DP MCB item_code_398 EA Excess(+) Full Conversion INR

399 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_399 EA Excess(+) Full Conversion INR

400 STANDARD DISPLAY BOARD-INGRESS SIDE item_code_400

401 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling and neatly dressing of disposed soil completely to be paid separately as per item no. MH1CN00600 item_code_401

402 i) All kinds of Soil item_code_402 M3 Excess(+) Full Conversion INR

403 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_403 M3 Excess(+) Full Conversion INR

404 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying & curing, excluding the cost of centering, shuttering finishing including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge, ALL WORKS UPTO PLINTH LEVEL. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. item_code_404

405 i) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum item_code_405 M3 Excess(+) Full Conversion INR

406 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_406

407 i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm item_code_407 M3 Excess(+) Full Conversion INR

408 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_408

409 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_409 M2 Excess(+) Full Conversion INR

410 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_410

411 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_411 KG Excess(+) Full Conversion INR

412 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item_code_412

413 i) 12mm dia x 300mm long with 75 mm dia x 3 mm thick plate item_code_413 EA Excess(+) Full Conversion INR

414 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item_code_414

415 i) Hot finished welded type tubes item_code_415 KG Excess(+) Full Conversion INR

416 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item_code_416

417 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_417 KG Excess(+) Full Conversion INR

418 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_418 M2 Excess(+) Full Conversion INR

419 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_419

420 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_420 M- Excess(+) Full Conversion INR

421 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_421

422 i) Pipes,cables etc. not exceeding 80mm dia item_code_422 M- Excess(+) Full Conversion INR

423 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_423

424 vii) 3 Core x 2.5 sq. mm item_code_424 EA Excess(+) Full Conversion INR

425 Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes. item_code_425

426 i) for 2.5 sq.mm. cable entry size with 9 terminals item_code_426 EA Excess(+) Full Conversion INR

427 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item_code_427

428 ii) Upto 32A DP MCB item_code_428 EA Excess(+) Full Conversion INR

429 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_429 EA Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information