COMPREHENSIVE MAINT OF MT VEHICLES AT AGE (I) R AND D JODHPUR

Amount

Comprehensive maint with material and servicing of the Vehicel (Make:- Hero Delux - 01 Nos and Bajaj Platina - 01 Nos) Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of Engine oil and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, , Cotton waste,as required complete all as directed by the Engineer-in-Charge. Note - (i) Spare parts, oil shall be measured and paid under relevant Items here-in-after.

Engine Oil

Spark plug

Rear Socker seal

front Socker seal

Front wheel bearing

Rear wheel bearing

Odometer assy complete

Clutch cable/wire

Side looking mirror

Indicator assembly

Clutch plate

Battery 12 V 7/9 AH

Break shoe

Head light LED bulb

Chain sprocket

M&L Fot Removing wheel of motorcycle complete with tyre and tube, taking out tube repair, puncher of tube and refixing properly complete all as specified and directed by Engineer-in-charge.

M&L for carrying out general periodical servicing and checking of TATA XENON complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage all as specified and directed Note - (i) Spare parts, oil shall be measured and paid under relevant Items here-in-after.

Air filter

Oil filter

Fuel filter

Engine Oil

Brake oil

Gear oil

Coolent

Head light LED bulb 12 Volts 60 watt

Clutch and pressure plate set including bearing and clutch paddle complete

Clutch master cylinder

Ball joint

Indicator assembly

Wiper assembly with blade

Fan Belt

Odometer assembly

Door lock assembly

Side looking mirror

M&L for repairing of self starter motor complete all as specified and directed by Engineer-in-charge.

M&L for Removing wheel Tata Xenon complete with tyre and tube, taking out tube repair, puncher of tube and refixing properly complete all as specified and directed by Engineer-in-charge.

M& L for under body coating with primer and rubber coat , engine protection coating for corrosion prevention andr cylincer coating also of Tata Xenon complete all as specified and directed by Engineer-in-charge.

M&L for computerised wheel alignment of TATA Xenon complete all as specified and directed by Engineer-in-charge.

M&L for four wheel rotation of Tata Xenon complete all as specified and directed by Engineer-in-charge.

M&L for repairing of rediator of TATA Xenon complete all as specified and directed by Engineer-in-charge.

Supply and fixing of battery 12 Volt 75 AH suitable for Vehicle Tata Xenon complete all as specified and directed by Engineer-in-charge.

Supply and fixing of foot mat for Vehicle Tata Xenon complete all as specified and directed by Engineer-in-charge.

Supply and fixing of floor matting best quality complete for Tata Xenon complete all as specified and directed by Engineer-in-charge.

Supply and fixing of foot step of best quality complete for Tata Xenon complete all as specified and directed by Engineer-in-charge.

Supply and fixing of seat cover of best quality complete for Tata Xenon complete all as specified and directed by Engineer-in-charge.

Supply and fixing of Horn complete for TATA Xenon including wiring connection and fixing complete all as specified and directed by Engineer-in-charge.

Supply and fixing of brass battery terminal complete all as specified and directed by Engineer-in-charge.

Supply and fixing of steering cover of best quality complete for Tata Xenon complete all as specified and directed by Engineer-in-charge.

M&L for denting and painting of rugged surface of Tata xenon making good and matching as per existing surface and colour etc complete all as specified and directed by Engineer-in-charge.

Removing oily/dirty sand n.ecx 50 m and depositing where directed at a level not exc 1.5 m above the starting point from POL Store near MT yard complete all as specified and directed by Engineer-in-charge.

Supply and spreading river sand (fine aggregate) for cushining of POL Barrels at MT yard complete all as specified and directed by Engineer-in-charge.

Supply only Measuring iron jug of capacity 1 leter complete all as specified and directed by Engineer-in-charge.

Supply only Measuring iron jug of capacity 2 leter complete all as specified and directed by Engineer-in-charge.

Supply only Measuring iron jug of capacity 5 leter complete all as specified and directed by Engineer-in-charge.

Supply only Measuring iron jug of capacity 10 leter complete all as specified and directed by Engineer-in-charge.

Supply only hand rotary oil/ diesel pump of stainless steel including transparent PVC hose/pipe approx 3 meter length suitable dia for pump outlet complete all as specified and directed by Engineer-in-charge.

Supply only heavy duty HDPE plastic jerry cans of capacity 50 leter each complete all as specified and directed by Engineer-in-charge.

Supply only funnel made of iron complete all as specified and directed by Engineer-in-charge.

vinayandsons