Provision of standby 11 KV HT underground cable from pole no. HT/D-16 to 4 pole structure IB switching sub-station, IB switching sub-station to 2 pole structure KV school, Westland sub-station type-III ... in Estate area at OFK

Excavating in trenches not exceeding 1.50 m wide and 1.50 m depth. for laying HT cables (0.50m wide & 1.0m depth) for laying pole pit (1.0m wide & 1.5m depth) getting it out soft/loose soil. Note: Digging by JCBs are not allowed.

Excavating in trenches beyond 1.50 m depth but not exceeding 3.0 m depth, getting it out soft/loose soil (for pole pit).

Sand cushioning in cable trenches 20cm thick including material & labour.

Supplying & laying un-reinforced precast concrete cable cover class HV type 1 flat size 300mmx180mmx40mm with identification of cable cover with material & labour.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.

GI pipe medium grade confirming to IS no. 1239 (part I & II) 100mm dia with all fittings and fixed completely to poles & laid in trenches with material & labour.

Demolition & dismantling Cement concrete in ground floors & pavings not exceeding 15 cm thick below or above ground level.

M&L PCC Type B2, mixed by volume 1:2:4 with 40 mm normal size graded coarse aggregate.

Danger Notice plate of 1.6 mm thick mild steel sheet vitreous enamelled white with letters,figures and conventional skull and bones in signal red colour and fixed with M.S.clamps, bolts and nuts of approved size for HT 25x20 cm size as per IS 2551 with material & labour.

Supply & fixing cross arm of MS channel bracings,supports,clamps and back plates fabricated from structural steel section including nuts & bolts, washers,welding,bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed & inclusive of one primer coat, one under coat & one finishing coat of paint with material & labour.

S & L of XLPE insulated (confirming to IS no. 7098 part 2) screened PVC bedded galvanized steel strip or wire armoured, electric power cable (Heavy duty) with aluminium conductor 11000 Volt grade size 185 Sq.mm 3 core including termination of both the ends with proper lugs. Make of cable: Unistar/Finolax/Havells/Sterlite/KEI/V-gaurd/Polycab/Unistar or Equivalent.

M&L Reinforced cement concrete (Design mix) of type M- 20, 1:1½:3 (20mm graded aggregate) in foundations, footings, under reamed piles etc. conforming to quantitative analysis report of the materials to be submitted by the contractor before execution of concretting work.

M&L Reinforced cement concrete columns, pillars, plers (Design mix) of type M- 20, 1:1½:3 (20mm graded aggregate) conforming to quantitative analysis report of the materials to be submitted by the contractor before execution of concretting work.

M&L, Form work to sides of pillars, columns (square or rectangular) etc for fair finished surfaces.

Mild steel TMT bars 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lass than 0.9 mm dia or securing with clips. Complete all as specified & directed.

Mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lass than 0.9 mm dia or securing with clips. Complete all as specified & directed.

M&L Reinforced cement concrete (Design mix) of type M- 20, 1:1½:3 (20mm graded aggregate) in beams, lintels over 1.5m span. conforming to quantitative analysis report of the materials to be submitted by the contractor before execution of concretting work.

M&L Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-64 (12 metre long) (confirming to IS no. 2713 part 1 & 3)

Please Enable Macros to View BoQ information