Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.1 LAccepted-Finance | ₹1.1 L | L-1 | Accepted-Finance L-1 Bidder |
| 2 | L-2₹1.2 L+₹15,258.08 (14.3%)Rejected-Finance | ₹1.2 L+₹15,258.08 (14.3%) | L-2 | Rejected-Finance L-2 Bidder |
| 3 | L-3₹1.3 L+₹20,344.11 (19.0%)Rejected-Finance | ₹1.3 L+₹20,344.11 (19.0%) | L-3 | Rejected-Finance L-3 Bidder |
| 4 | L-4₹1.5 L+₹39,671.01 (37.1%)Rejected-Finance B N R KALI MANDIR ALKUSA DHANBAD JHARKHAND 828117 | DHANBAD | DHANBAD | JHARKHAND | 828117 | ₹1.5 L+₹39,671.01 (37.1%) | L-4 | Rejected-Finance L-4 Bidder |
Tender Value
₹1.2 L
EMD Value
₹1,600
Closing Date
15 Jun 2026, 5:00 pmClosed
ACE, Bastacolla Area
Civil Dept, Office of the GM(Vikash Bhawan) Bastacolla Area
Repair and Maintenance of Mining Room at ROCP under Bastacolla Area
2026_BCCL_360776_1
BCCL/Civ/BA/26-27/eNIT-06/963
Open Tender
Civil Works - Buildings
Percentage
21 days
Bastacolla Area
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,600
18 Sept 2026
6 Jun 2026
16 Jun 2026
6 Jun 2026
15 Jun 2026
6 Jun 2026
6 Jun 2026 - 11 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 0.17 | M3 | 214.15 | ₹36.41 |
| 2 | Brick (Fly Ash) flat soling. | 0.1 | M2 | 327.6 | ₹32.76 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). | 0.03 | M3 | 5,120.95 | ₹153.63 |
| 4 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in Foundation & Plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand). | 0.11 | M3 | 5,002.05 | ₹550.23 |
| 5 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in supertstructure in :Cement mortar 1:6 (1 cement : 6 coarse sand). | 2.66 | M3 | 5,483.5 | ₹14,586.11 |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 34.63 | M2 | 546.2 | ₹18,914.91 |
| 7 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet. | 34.63 | M2 | 105.65 | ₹3,658.66 |
| 8 | Providing and Fixing of PVC False Ceiling 0f size 12feet x 10 inch, thickness 7mm. | 19.32 | M2 | 1,143.7 | ₹22,096.28 |
| 9 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 93.79 | KG | 73.45 | ₹6,888.88 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 22.5 | KG | 88.2 | ₹1,984.5 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_373653.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 1.64 MB
BOQ_373653.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .