CA NO GE(N)AMB-11/2021-22 SPECIAL REPAIR TO BER CEILING FANS AND GEYSERS IN SECTOR A AND PROVN OF GEYSERS AND EXHAUSHT FANS IN JCOS/OR ACCN AT CW /HARDING LINES AND MD ACCN OF 77 ARMD WORKSHOP IN THE AREA OF GE (NORTH) AMBALA CANTT

Amount

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit medium grade ISI marked not less than 20 mm dia with accessories, concealed in wall and on surface of ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including sunken pressed steel terminal boxes (modular type, size/modules as required at site) made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally with and including screws, modular cover plate over sunken box for housing the modular switches , socket outlets & fan regulators etc and making good the disturbed surfaces as per existing for one light point/bell/fan point controlled by one switch Note:-1. Modular metal flush/sunken Box alongwith modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 2. Switch, socket and fan regulators to be measured and paid separately.

S&F modular switch 6 Amp, 1 way, 1 module, 230 volts , flush type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing modular switch 16 Amps,1 way, 1 module, flush type, single pole, 230 volt , AC supply including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new covered plate over sunken box for housing the modular switches complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed by Engineer-in-Charge.

M&L sub main wiring with two run of 6sqmm, PVC insulated, unsheathed copper conductor (FRLS-H), multistranded copper conductor, 1100 volts grade ISI marked with one run of 6 sq mm, PVC insulated, unsheathed copper conductor (FRLS-H), multistranded copper conductor as earth contuinity wire and including provision of non metalic PVC conduit of size 25mm dia ISI marked medium grade concealed on wall surfaces and on surface on ceiling surfaces including all Tees,Bends,elbow, reducer, bell mouth tube ends, fixing accessories such as couplers , bolts nuts, saddles, pipe hooks, all fittings/labours fixed on walls/ceiling & making good to disturbed surfce of wall and ceiling complete all as specified and as directed by Engineer-in-Charge. Note: Two runs of 6 sqmm cable and one run of 6sqmm cable with PVC conduit shall be measured as one length/Unit.

Supply & fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C'series complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCB SP 6-32 Amps, 240 volt, 10 KA 'C' curve including removing old Unserviceable MCBs complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix exhaust fan 300 mm sweep, anti corrosive metal body, sturdy metal bird guard, copper wounded, double ball bearing, five star rating,1320 RPM,50HZ, 240 volts complete with dynamically balanced blade for vibration free rotation, split pin, clamp and fixing at site on and including MS fabricated base frame using flexible wire after making hole in wall as required at site and making good the disturbed surfaces and including making the electrical connection by using three core wire with colour code complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ceiling fans, AC, single phase, 230 V, 50 Hz, copper wounded of 1200 mm sweep with BLDC technology , max power input up to 35 watt, copper wire induction motor with 5 star BEE ratings, including remote and set of batteries complete along with canopy cover, down rod 'U' clamp, 3 core PVC flexible cable 1sqmm for making connection of fan and hanging the fan in clamp, connecting with existing electrical connection all as specified and as directed by Engr-in-charge. Note ; - MES No shall be written by the contractor with permanent marker over ceiling fan of specified size and colour and quoted rate shall be deemed to be included of this element.

Supply & Fix Water heater (Geyser) storage type electric of capacity 25 Ltrs , BEE 5 Star rated, ABS body, metal tank with glasss lined coating, multiple heating option, shock safe plug, puf insulation, incoloy glass coated anode rod / copper heating element of capacity 2KW with ISI mark , adjustable knob for temp setting with minimum 8 Bar high working pressure, multi functional safety valve & whirl/Swirl flow technology, thermostat electronic type, thermal cutout capillary type complete including superior quality copper connection pipe heavy duty 15mm dia 450mm long, brass adopter for water connection with nikhel coated ISI marked with fastner, nut bolts, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per existing surface, connecting to inlet and outlet valves, testing complete all as specified and as directed by Engineer-in-Charge. Note :- Warranty certifcate to be produced by the Contractor from OEM for the following components before processing the bill. a) for Product - 02 Years b) for Heating element - 03 Years c) for metal tank - 07 Years

S & F bib tap 15mm bore cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge.

S & F 20mm bore cast copper alloy chromium plated stop valves, screwed down, high pressure with butterfly handle, scrwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer-in-Charge.

S & F 15mm bore cast copper alloy chromium plated stop valves, screwed down, high pressure with butterfly handle, scrwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer-in-Charge.

S & F galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge.

S & F galvanised iron tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge.

Supply & fix chromium plated Brass wall mixer, external fixed type for hot and cold water supply including required fixtures and fittings suitable for 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S & F copper connection heavy duty 15 mm bore nikhel coated, 450 mm long with brass adopter for water connection with complete all as specified and as directed by Engineer-in-Charge.