WBPWD/EE/BED/e-NIQ-111/2024-25

Amount

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 6 Way HTPN DB (Make- Legrand / Schneider / ABB / Siemens) Incommer: 415V 63A 4 pole MCB Isolator - 1 No. Outgoing: 1) 10A-32A, 10KA, SP MCB - 12 Nos. 2) 40A ,10KA, SP MCB - 6 Nos.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make : Finolex/ Gloster/ Polycab/ RR Kabel/ Havells) of the following sizes through 19 mm dia, 3 mm thick Polythene pipe recessed on wall, ceiling, etc. as required, including supply & laying of heavy gauge 19 mm dia, 3 mm thick polythene pipe embedded in wall by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG and making necy. connection as required, as per G.S. 3 x 22/0.3 (1.5 mm2) as ECC

Do---------------Do--------------------Do 2 x 36/0.3 (2.5 mm2) + 1 x 22/0.3 (1.5 mm2) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make : Finolex/ Gloster/ Polycab/ RR Kabel/ Havells) of the following sizes through 25 mm dia, 3 mm thick Polythene pipe recessed on wall, ceiling, etc. as required, including supply & laying of heavy gauge 25 mm dia, 3 mm thick polythene pipe concealed in wall by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG and making necy. connection as required, as per G.S. 2 x 80/0.4 (10 mm2) + 1 x 84/0.3 (6 mm2) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make : Finolex/ Gloster/ Polycab/ RR Kabel/ Havells) of the following sizes through 32 mm dia, 3 mm thick Polythene pipe recessed on wall, ceiling, etc. as required, including supply & laying of heavy gauge 32 mm dia, 3 mm thick polythene pipe concealed in wall by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG and making necy. connection as required, as per G.S. 4 x 126/0.4 (16 mm2) + 2 x 80/0.3 (10 mm2) as ECC

Distribution wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe embedded in wall complete with all accessories to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. (2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) Average run 9 Mtr.

Supply and Fixing of decorative type LED fittings after cutting the gypsum/ metal board & mending good the damages to original finish as per direction of EIC as follows (Make-Philips/WIPRO/Crompton Greaves). The LED luminaire manufacturer should have UL / CE Certification from the original LED manufacturer. Scan Copy of LM-79, LM-80 test report should be uploaded. Recess Mounted circular 6 watt LED round slim down lighter made from the die cast aluminium body having system lumen output not less than 660 lumen, colour temparature 4000K / 5000K (as per site requirement), CRI > 80, IP rating 20 or better, lumen efficiency not less than 100 lumen/watt.

Supply and Fixing LED 4ft Decorative light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required [Philips cat no . - STAR Bright Wide 40 watt CDL or similar spec of Wipro / Crompton Greaves] as directed by EIC

Supply and fixing of decorative 17 mm wide profile light fittings with appropriate LED driver. Colour Temperature – 4000K

Supply and Fixing industrial type exhaust fan after cutting wall & manding good the damages to original finish incl. S & F Aluminium louver shutter as followes.(Make: EPC/Usha/Crompton):- (a) 150 mm dia/ 6 inch exhaust fan.

Supply and Fixing industrial type exhaust fan after cutting wall & manding good the damages to original finish incl. S & F Aluminium louver shutter as followes. (Make: EPC/Usha/Crompton):- (a) 225 mm dia/ 9 inch exhaust fan.

Supply and laying of 32 dia mm uPVC pipe with all fittings fixture through wall be GI saddle.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes as follows:- 2.5 sq. mm. as ECC ( Schedule - 2017, Page - F-5)

Do---------Do---------- 4 sq. mm. as ECC

Do---------Do---------- 10 sq. mm. as ECC

Do---------Do---------- 6 sq. mm. as ECC

Do---------Do---------- 16 sq mm ECC

Supply & Laying of 1.1 KV grade XLPE insulated. PVC sheathed, steel Armoured Al. conductor Cable of the following size,in respect of component materials and tests, and as per the approved makes list attached herewith. (cost includes Supply & Fixing of straight through joint, if required, as per direction of EIC) (Make - Gloster/ Polycab/ Havells/ KEI/ Polycab) (a) 4 core 95sq mm cable on wall with GI saddle/on existing cable tray with suitable fixing arrangement

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below & Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials (Schedule - 2017, Page - F-5/8(b) 4 core 95sq mm cable

Supply and fixing of Decorative mirror light fittings. (Make – Philips, Moon Glade picture light, Similar to Wipro/CG)

Supply and fixing of 12 watt LED fittings driver as per direction of EIC. (Make- Philips/Crompton/Wipro) Note : 1) Normal works should be started within 16 hrs & for emergency breakdown work within 8 hrs, with sufficient manpower after getting information. 2) Materials of minimum quantity . Like wire, cable of different size, light fittings, Gland, Scoket, etc. should be store in the site by agency by own responsibility for emergency work. Each individual work must be completed with minimum executing time as per site requirement. 3) The Agency must submit the details of communicating person in this regard along with his contact details.

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

M/S R. K. ENTERPRISE (BID ID -6272116)

SENSUAL ELECTRO MECH (BID ID -6287555)

BANERJEE ENTERPRISE (BID ID -6290389)