Construction of additional accommodation for Government High School building at Darahal Tehsil Joginder Nagar District Mandi (H.P.) under RMSA

Amount

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square, rectangular, polygonal in plan including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beam, cantilever, girders and lintels, sides and soffits of beams beams haunching below supporting cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded, crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete grade M-20 design mix mechanically mixed and vibrated with minimum cement content 320 Kg. (Three hundred twenty kilogram) per cubic metre with graded, crushed stone aggregate 20mm (Twenty millimetre) nominal size including curing complete and excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, basis of columns and the like mass concrete upto floor all level including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per the direction of Engineer-in-Charge.

Providing and laying M-20 grade of cement concrete mechanically mixed and vibrated with minimum cement content 320 Kg. (Three hundred twenty kilogram) per cubic metre with graded, crushed stone aggregate 20mm (Twenty millimetre) nominal size excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per the direction of Engineer-in-Charge.

Providing and laying cement concrete grade M-20 design mix mechanically mixed and vibrated with minimum cement content 320 Kg. (Three hundred twenty kilogram) per cubic metre with graded, crushed stone aggregate 20mm (Twenty millimetre) nominal size excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts upto floor all level including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per the direction of Engineer-in-Charge.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect as per the direction of Engineer-in-Charge.

Second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect as per the direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality/quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded/crushed crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete with in all leads, lifts and carriage of material and as per the direction of Engineer-in-Charge.

Boulder filling dry hand packed tightly under floor including carriage of materials within all leads, lifts and other incidental charges complete in all respect as per the direction of Engineer-in-Charge.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood panelled glazed or panelled and glazed shutter for doors, windows and clere story windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing steel glazed framed shutter of Z-section with 4mm (four millimetre) thick glass pan with putty for doors, windows and clear story windows required shape and section with fitting and necessary screws etc. including fixins iron hinges with necessary screws including applying a priming coat of read lead paint complete as per approved specification/design including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing steel wire gause windows and ventilators of standard rolled steel sections,joints mitred and welded with windows frames i/c rawal plugs and steel screws as required and iron fittings i/c galvainsed MSwire gause desination 85G with wire of dia 0.56mm (zero point five six millimetre) for doors windows and clear story windows including mettaled beading with necessary screws including applying a priming coat of read lead paint complete including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 300x16mm (Three hundred into sixteen millimeter) anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 250x10mm (Two hundred fifty into ten millimeter) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (One hundred millimetre) aluminum handles anodized transparent or dyed to required shade and colour with necessary screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete in all respect including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing M.S. plain grills of required patterns and design in wooden frames of windows etcetra with M.S. flat, square or round bars with round headed bolts and nuts or by screws complete in all respect including carriage of materials within all leads and lifts complete in all respecte.

Providing and fixing 6mm (six millimetre) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and fillets to be measured and paid for separately) including carriage of material within all leads lifts and other incidental charges complete in all respect.

Providing and fixing glass strips in joints of terrazzo/cement concrete floors 40mm (forty millimeter) wide and 4mm (four millimeter) thick including carriage of materials within all leads and lifts complete in all respect.

40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement complete in all respect including curing complete and carriage of materials within all leads and lifts.

Providing and laying 20mm (twenty millimetre) thick Acid proof tiles of size upto (300x300mm (three hundred into three hundred millimetre)) of specified shade in floors, treads of steps and landing lead of a bed of 12 mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointing with cement slurry mixed with pigment to match the shade of tiles including carriage of materials within all leads and lifts complete in all respect.

Providing and laying duro stone viterified tiles of size upto (300x300mm (three hundred into three hundred millimetre) of specified shade in flooring treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per satisfaction of Engineer-In-Charge upto floor all level including carriage of materials within all leads and lifts complete in all respect.

Providing and laying duro stone viterified tiles of size upto (300x300mm (three hundred into three hundred millimetre) of specified shade in skiring and risers of steps upto any height laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per satisfaction of Engineer-In-Charge upto floor all level including carriage of materials within all leads and lifts complete in all respect.

Cement plaster skriting 15mm (fifteen millimetre) thick (upto any height) with cement mortar 1:3 (one cement : three sand) finished with a floating of neat cement including rounding of junction with floor complete in all respect including curing complete and carriage of materials within all leads and lifts.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over five microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts and other incidental charges .

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings including carriage of materials within all leads and lifts complete in all respect .

Steel work welded in built up sections, trusses and framed work including cutting hoisting and fixing and launching in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees flats with connecting plates or angle cleats in main and cross beams, hip and jack rafters purlins connected to common rafters and the like including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing standard steel section of ISLC and flat iron doors, windows and clerestory windows manufactured from ISLC iron section 75X 40mm (seventy five in to forty millimetre) with M.S flat iron section of 75X5mm (seventy five in to five millimetre) thick including hinges jamb, lock jamb, beed and if requried angle thrashold of mild steel angle 50x25mm (fifty in to twenty five millimetre) welded or righdly fixed by mechanical means, lugs with split and tails to each jamb including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arragnement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing angle iron doors, windows and clerestory windows frames manufactured from steel iron section 40X40x6mm thickness including hinges jamb, lock jamb, beed and if requried angle thrashold of mild steel angle 50x25mm welded or righdly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm thick with provision for locking arragnement and shock obserber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing M.S. fan clamp Type-1 of 16mm (sixteen millimetre) diametre bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 90cm (ninety centimetre) heigh railing with MS rectangular hollow pipe 5x7.5cm (five into seven point five centimetre) with 20x20mm (twenty into twenty millimetre) M.S. square bar ballusters at 30cm (thirty centimetre) centre to centre duly welded with M.S. flat 40x6mm (forty into six millimetre) inside to M.S. lugs of 20mm. (twenty millimetre) square bar at lower end embeded in RCC steps or waist slab including priming coat of steel primer and painting with steel enamal paint other than white as per design and instruction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Applying priming coat over new steel and other metal surface after and including preparing the suface by thourly cleaning the oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, redoxide/zinc oxide chrome including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint other than white brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with enamel paint white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement : four sand) including curing and carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect .

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect .

White washing with lime on undecorated ceiling and/or slopping roofs (two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregate 20mm (twenty millimeter) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement mortar 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded/crushed crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate of twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction of Engineer in Charge

Providing and fixing vitreous china laboratory sink of size 600x450x150mm (six hundred into four hundred fifty into one hundred fifty millimetre) with CI or MS brackets painted white including cutting holes in walls and making good the same but excluding fittings including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 32mm (thirty two millimetre) diametre CP brass waste heavy duty for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre lead waste pipe for wash basin or sink including brass check nut complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600 x 20mm (six hundred into twenty millimetre) CP brass towel rail complete with CP Brass brackets fixed to wooden plugs with CP brass including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass self with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing choromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. stop cocks heavy duty including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 75mm (seventy five millimeter) nominal size, high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including carriage of materials within all leads and lifts.

Providing and fixing 75 mm dia (seventy five millimetre diametre) PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 75 mm dia (seventy five millimetre diametre) PVC collars ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 75 mm dia (seventy five millimetre diametre) PVC clamps ISI marked of approved design with steel screws and rawal plugs etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm x 90 mm (one hundred into ninety millimetre) diametre PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 500 ltr. (five hundred litres) net capacity PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connections, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof coupling, PVC cover with locking arrangement including hoisting upto all height above ground level including carriage of material within all leads, lifts and other incidentals.

Providing and fixing to wall, ceiling and floor 15mm (fifteen millimeter) nominal bore galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and laying in trenches 15mm (fifteen millimetre) nominal bore galvanized mild steel tube (medium grade) tube fitting complete in all respect (earth work in trenches to be measured and paid for separately) including carriage of materials within all leads and lifts.

Excavation in drains and channels etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, saturated soil including chiseling or any other mixed variety of soil dewatering and / or removal of slush and other incidentals, lifts upto any height, stacking the excavated soil upto all leads and lifts clear from the edge of excavation and then returning the stacked soil in fifteen centimeter thick layers when required into plinth sides of foundation etcetra consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect.

Providing and fixing 15 mm (fifteen millimetre) diametre G.I./M.I. union for G.I. pipe complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15 mm (fifteen millimetre) diametre G.I socket for G.I. pipe complete in all respect including carriage of materials within all leads and lifts.

Dinesh Kumar

Sunil Kumar