REPAIR AND MAINT OF MD ACCN OF MES QTRS AT SHIKARGARH, LANCER LINE AND OTHER LOCATIONS IN ARMY AREA AND REPAIR AND MAINT INCLUDING PERIODICAL SERVICES TO WATER SUPPLY INSTALLATIONS, AC PLANT ROOMS, STP, OHT ETC AT ARMY AREA JODHPUR UNDER GE UTILITY

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork in cement mortar 1:6 with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar 1:6 but except stone complete all as specified and directed.

Extra over of hammer dressing to face stone with maximum depression on face from straight edge not exceeding 20mm and dressing face bed and joints as specified to squared rubble walling jodhpur type brought upto courses as directed

Racking out joints/pointing to square rubble masonry, Jodhpur type regular coursed built in cement mortar complete all as specified and directed.

M&L for keyed pointing to square rubble masonry, Jodhpur type regular course in cement mortar 1:4 all as specified. complete all as specified and directed.

M&L for preparation of newly plastered/ pointed wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

S&F 50 mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones and in plinth protection templates, etc not exceeding 2m in length, punched, dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for rubberised chequered cement concrete tiles of size 300x 300mm, 20mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 as in flooring complete all as specified and directed.

M&L vitrified, coloured and printed tiles of size 600x600mm, 10mm thick set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L vitrified, coloured and printed tiles of width as directed and 8 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles fixed over and including 10 mm thick cement screed/backing coat in cement mortar 1:4 as in vertical surface like skirting, dado etc., complete all as specified and directed.

M&L Nonskid Ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick cement screed in cement mortar 1:6 as in floors etc. complete all as specified and directed.

M&L Nonskid Ceramic tiles, coloured, joint free, 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick cement screed in cement mortar 1:6 as in floors etc. complete all as specified and directed.

M&L Nonskid Ceramic tiles, coloured, joint free, 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 10 mm thick cement screed/backing coat in cement mortar 1:4 as in skirting etc. complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile colour laid over and including 10mm thick screed/rendering in cement mortar 1:4 as in vertical surfaces like skirting, dado etc complete all as specified and directed.

Dismantling water tanks of any description, in any position exceeding 250 but not exceeding 500 lit capacity complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene multilayer water storage tanks (cylindrical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed/fixed to pipes/ferrules of 20mm bore complete all as specified and directed.

S&F in repair Vitreous China squatting pan, Orissa pattern, size 580x440mm, white, with integral foot rests and connection to trap, to flushing pipe, anti syphonege pipe etc complete including taking down existing WC and making good the disturbed surfaces complete all as specified and directed.

S&F in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including connection to drain, to flush pipe and anti syphonic pipe etc complete including taking down existing WC and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets & flush pipe 32 mm dia of polyethylene of low or high density or for low level cistern complete all as specified and directed.

S&F in repairs vitreous china wash basin, white flat back, size 550mmx450mm with and including waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including supplying and fixing pillar tap cast copper alloy, chromium plated, fancy type, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repair bib tap, cast copper alloy, fancy type, chromium plated, crutch of butter fly handle, screwed down for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop valve, cast copper alloy, crutch or butter fly handle, screwed down for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Swivel shower rose of PTMT, any colour, for fixing with 15 mm dia pipe, (Minimum weight 40 gm) with and including Shower arm 15 mm size, 195 mm long, 45 degree bend with flange of PTMT any colour (Minimum weight 40gm) complete all as specified and directed .

S&F in repair Stainless steel sink of overall size 495mmx420mm with bowl size 410mm x 330mmx160mm, 1.00mm thick for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets and connecting union complete all as specified & directed.

S&F grating doom 100 mm dia of PTMT, minimum weight 25 grams complete all as specified and directed.

S&F in repairs decorative type curtain rod 22 to 25 mm dia, stainless steel finish with best quality metal knob complete all as specified and directed.

S&F in repair purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia complete all as specified & directed.

S&F in repair decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods complete all as specified & directed.

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (without taking off shutter from the frames) complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (without taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

S&F 35 mm thick factory made Plain, framed, 1st class softwood panelled shutters (two panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile shall be as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick factory made Plain, framed, 1st class softwood panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick factory made Plain, framed, 1st class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification & drawing complete all as specified and directed.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 1st class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. complete all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete as per architectural drawings, specified and directed

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per approved sample, specified and directed

S&F aluminium grill of design No DG-104 7.5mm thick of decogrill or equivalent approved make with 1 mm thick 'F' sections of suitable size all as directed by Engg in Charge.

S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified & directed at site.

S&F door catcher/door magnet for cabinet cupboards fixed with screws complete all as specified and directed.

S&F Butt hinges 100 mm, medium weight, cold rolled, mild steel complete all as specified and directed.

S&F Butt hinges 100 mm, medium weight, stainless steel, complete all as specified and directed

S&F 200 mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm size aluminum handles cast type, anodized complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new clips/pins complete all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and directed.

S&F 3 mm thick, figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as directed.

Taking down steel windows/ ventilators and making good & sorting of materials & remove from site complete all as specified.

S&F Factory made box type steel window with pintle hinges & 02 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer (with or without cooler opening as directed by Engr-in-charge) and Drg No CEJZ/TD/20 Sheet 1/3 to /3 complete all as specified and as directed

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge) and Drg No CEJZ/TD/20 Sheet 1/3 to 3/3 complete all as specified and as directed

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified and Drg No CEJZ/TD/24 Sheet 1/3 to 3/3. complete all as specified and as directed

S&F Factory made box type steel ventilator without glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified and Drg No CEJZ/TD/20 Sheet 1/3 to 3/3 complete all as specified and as directed

Supply and fabrication of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparation of new surface of wood and wood based material any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed

M&L for preparation of new steel surfaces over 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing wire mesh of any description and in any position and supplying and fixing Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc complete all as specified and directed

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified and directed

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6, finished even and smooth without using extra cement on fair faces of brick work or concrete surfaces/stone masonry complete all as specified and directed.

M&L for rendering 5 mm thick in cement Mortar 1:4, finished even and smooth without using extra cement on fair faces of ceiling surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling and applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls and applying three coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of wall care putty on wall surfaces complete all as specified and directed.

M&L for Complete removal of existing treatment on wall (any number of layers) by scarping with steel scrapers or any other mean including filling depressions of scrapped surface with putty, preparation of surface for further treatment and applying two coats of distemper oil emulsion white or tinted over a coat of wall care putty on walls complete all as specified and directed

M&L for Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales and foreign materials scarping down smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed

M&L for Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales and foreign materials scarping down smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed

M&L for Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales and foreign materials scarping down smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of cement base paint including watering and curing of surface adequately before and after application of cement base paint complete all as specified and directed.

M&L for Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Taking up or down steel tubing and connection of 15 mm bore tube of any description and in any position complete all as specified and directed.

Taking up or down steel tubing and connection of 20 mm bore tube of any description and in any position complete all as specified and directed.

Taking up or down steel tubing and connection of 25 mm bore tube of any description and in any position complete all as specified and directed.

S&F 15 mm dia (nominal) GI tubing, medium weight with all fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed

S&F 20 mm dia (nominal) GI tubing, medium weight with all fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed

S&F 20 mm dia (nominal), 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F 25 mm dia (nominal), 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F tubular towel rail of brass chromium plated, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Taking down of existing damaged / loosened cement concrete/ brick tiles from roof / terrace to a depth of average 50 mm including taking down of existing APP membrance if any, cleaning with water and depositing of debris to a distance not exceeding 50m complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:4 mixed with WPC @ 3% by weight of cement on at green concrete surfaces complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M&L preparation of plastered surface of roof slab by thoroughly wire brushing, washed, dried up cleaned all foreign matter and dust and applying one coat of approved bituminous primer @ 0.40 ltr per sqm complete all as specified and directed

M&L for 3mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method over primed surface of roof slab complete all as specified and directed

M&L 40mm thick PCC (1:2:4) type B-0 (10mm graded stone aggregate) well compacted using integral WPC as per manufacuture's instuctions and making with "V" shaped groove of 10mm deep filing with mastic bitumen. Size of PCC panel with groove shall not exceeding 0.40 sqm each.

M&L for Endura cool roof SRI tiles of size 300x300mm, 10mm thick laid over and including 15mm thick scrred bedding in cement mortar 1:4 over and including 25mm thick PCC 1:2:4type B0 using 12.50mm graded stone aggregate, joints grouted and flush pointed in cement mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed

S&F in repairs Corner Glass shelf, 250mm, superior quality with CP tubular framing and brackets complete all as per sample kept in GE's office

M&L for 18-20mm thick Black granite stone as in cooking platforms, slabs for oval type WHB, sinks/cills etc & the likes complete laid over 15 mm thick screed in cement mortar 1:4 including mirror polishing and providing necessary holes for gas pipe / water supply pipes etc and rounding of the edges of stone slabs as in cooking platforms complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed

S&F in repair for plate rack made out of 1 mm thick stainless steel of size 75CM X 75CM X 25CM with all internal fittings and compartments/ partitions all as per sample kept in GE office complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc. Complete all as specified and directed.

M&L for PCC 1:3:6, type C2, using 20mm graded stone aggregate 50 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade 'A' as in plinth protection complete all as specified and directed.

M&L for 75 mm thick, PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M&L for 60 mm thick, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks/tiles of triangular / Zigzag / Haxagone in shape or shape and design as approved, with grey cement and pigment, having crushing strength not less than 300 Kg/Sqcm and conforming to IS specifications, laid over and including a layer of 25mm thick sand cushion including filling the joints with sand as in floors/ paths/ pavings etc, complete all as specified and directed.

Dismantling of stone slabs and tiles (Kota stone etc.) of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut Kota stone slab 20 mm to 25 mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6 as in flooring with border complete all as specified and directed.

M&L for machine cut kota stone slab 20 mm to 25 mm thick laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in cement mortar 1:4 as in riser / steps, skirting, dado and pillars complete all as specified and directed.

M&L for factory made precast machine pressed kerb stones of PCC 1:2:4, Type B1, using 20 mm graded aggregate and of shape and size as directed, set jointed and pointed in cement mortar 1:4, fixed in repairs with and including necessary excavation and earth work and making good the disturb surfaces to match with the existing surfaces including removal and disposal of rubbish complete all as specified and directed.

M&L for Preparation of new plastered or unplastered or concrete surfaces and applying two coat of plastic emulsion paint over a priming paints plaster coat of any colour complete all as specified & directed

Fixing only Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; gear operated type with chain wheel & hand chain any thickness complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F MS work in roof trusses (framed), trussed, rail's and fastenings and heavy bracket. Framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc with Fe 410.0 or Fe-310.0 complete all as specified and directed.

Dismantling plain or corrugated AC sheeting, any guage of any description and in any position as in roof coverings including connected ridge complete all as specified and directed.

M/S Dharam Chand Lal Chand Jain