Loading
Loading…
Loading…
Tender Value
₹78.0 L
EMD Value
₹1.6 L
Closing Date
5 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal division- Construction of new Trip shed at Tiruchanur (TCNR) over Guntakal division
GTL-EM-64-2025-26~SCR
GTL-EM-64-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.6 L
5 Jan 2026
12 Dec 2025
22 Dec 2025
223 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 78,03,955.86 | ||
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 30,822 | |
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 51,702 | |
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 70 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 1,58,772 | |
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 120 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 6,86,832 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,99,100 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 24,000 | |
| for details. | Item Breakup | — | — | ||
| Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. | — | — | — | 49,500 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 71,449.5 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc., as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc. The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site. The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 35,840 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench in hard soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works. | — | — | — | 14,600 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and making good of the same to its original form and shape completely including all connected materials and works. | — | — | — | 57,438 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench under the Track below 2mtrs. horizontal drilling bore with Hydrallic Jack suitable size for provision of 110/50mm dia GI/HDPE pipe. | — | — | — | 1,07,850 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 3,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 19,200 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection and connecting of SMC Junction Box of Size 700 x 480x 210 mm of Model No: GSJB 7450 of Sintex make or equivalent make for fixing of 4-Pole MCCB-63A and termination of 95 Sq.mm cable to extend supply to welding plants. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 2,02,560 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables up to 150Sq mm and all necessary accessories complete. | — | — | — | 1,20,600 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 55/IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9504 of Hensel make conforming to IS:13573/92,IEC 60947-3 with its latest amendments, with necessary terminals suitable for cables upto 50 Sq mm and all necessary accessories complete. | — | — | — | 14,800 | |
| for details. | Item Breakup | — | — | ||
| Fabrication and erection of 14 SWG CRCA sheet steel enclosure of suitable size for outdoor LT feeder pillar with IP 54 protection, Double Door, including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with EPOXY powder coating including cost and conveyance of all materials and labour charges. The MDBs shall be mounted on suitable required size of CC plinth (CC plinth cost will be paid separately) and secured with bolts, nuts and washers as advised by Engineer at site. The panel comprising of 200A tinned Copper Bus Bar (RYB & N of same size) required shape supported with appropriate DMC / SMC barriers and colour coded with heat shrinkable sleeves, LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters (Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh), Current T/Fs, indication lamps for incoming & outgoing feeders. Support insulators, neutral links,Incoming & outgoing terminals, suitable cable termination glands , grommets, lugs, connecting wires and all other accessories suit with the following switchgear and accessories. The cables should be properly terminated in the switchgears with necessary lugs and all necessary accessories complete. The panel should comprise of the following Switchgear. 1. Supply and installation of DPX3 160 thermal magnetic based release; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 with its latest amendments of model no. 4200 95 of Legrand make with extended ROM, spreader links (2 sets) -1 no's., 2. Supply and instllation of DPX3 160 thermal magnetic based release; Icu = 36kA; 63A 4 Pole MCCB conform to IEC 60947-2 with its latest amendments, of model no. 4200 93 of Legrand make or it's equivalent with extended ROM, spreader links (2 sets)-1 no's., 3. Supply and erection of of 32A RCBO 100mA with all connected accessories - 2 no's., 4. Supply and fixing of C curve FP MCBs of 32 A with all connected accessories -4 no's., 5. Supply and erection of LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters (Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) on existing box panel board including connections complete -1 no's., 6. Supply and erection of LT current transformer with primary 100/5A to 1000/5A ratio in the existing panel including connections complete - 4 no's. The Fabricator of the LT panel should have the CPRI approval. (Drawing approval to be taken prior to supply) | — | — | — | 1,12,608 | |
| for details. | Item Breakup | — | — | ||
| Cement concrete solid block masonry in foundation and plinth or wall with factory made blocks with cement concrete 1:3:6 with all labour complete. (The wall should be properly plastered as per the advise of site supervisor). | — | — | — | 13,481 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Manual change over Switch of model no: IHCCFE0100 of havells make or its equivalent | — | — | — | 8,190 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of LED HI-Bay 150 Watt as per as per attached Railway Specification. | — | — | — | 8,00,000 | |
| for details. | Item Breakup | — | — | ||
| Design, Fabrication, supply, fixing, connecting, testing and commissioning of 16 watts LED pit lights fitting, (10W+4 W+2 W) Aluminum die cast with IP67 Protection necessary hardware material suitable to work on 24 V DC/48V AC. 3 Dimensional type for pit lighting as per attached Railway Specification) Note Prior Approval to be taken including all accessories. | — | — | — | 6,53,100 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Junction box similar to Cat. No. D9045 of M/s Hensel Make or its equivalent Incl. fixing. | — | — | — | 52,500 | |
| for details. | Item Breakup | — | — | ||
| Design, Supply, fixing connecting, testing and commissioning of Control Panel Unit containing 3 Nos. SMPS POWER SUPPLY UNITS enclosed in sheet steel enclosure with all connected safety accessories, Indications & Controls, dedicated for the High Power LED Based 16 W LED Pit/Catwalk Lights as per following Specification PANEL containing 3 nos of SMPS units, Each will be suitable for 7 Nos of Pit/Catwalk lights total 7x3=21 Nos of Pit/Walk lights) Specification for each SMPS Unit: Input Voltage: 180V to 260Volts, Output Voltage :24 Volts dc +/- 1% Regulation-C, Output Current: 10 Amps Each SMPS, Protection : Short Circuit Proof, Over Voltage Protection, Ripple: < 200mv including all accessories. Fixing, connecting, testing and commissioning of SMPS BASED Power supply units with all connected accessories including cable connectors etc. | — | — | — | 4,62,600 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of CPVC pipe SDR-13.5 Pipe of size 32 mm (1 1/4 inch) as per IS 157778/8/2007 with its latest amendments, conduit pipe with all required accessories such as short/long bends, CPVC/PVC junction boxes including masonry work (chipping and making good) and labour charges etc. Make/Brand Sudhakar/Nandi/Godavari/Nagarjuna only. | — | — | — | 60,824 | |
| for details. | Item Breakup | — | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 46,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Junction box similar to Cat. No. DK 1616 G of M/s Hensel or equivalent make. | — | — | — | 64,600 | |
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sq.mm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 1,21,108 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 80,750 | |
| for details. | Item Breakup | — | — | ||
| Design, fabrication, supply, fixing, testing, connecting and commissioning of suitable size of plastic box (FRP of minimum thickness of 3mm, with 12mm hylam sheet duly mounting with one no. of 125 Amps 415 volts 3P+N+E plug & socket and 125Amps 4 pole MCCB complete with provision of cable for incoming and out going. The scope of work includes complete supply and fixing of suitable clamps, bolts, nuts, washers, lugs, cable glands and locking arrangements. The FRP box fixed on the columns/ walls with necessary clamps and rag bolts etc. NOTE: 1. All MCCBs fitted with Microprocessor based/electronic release based relays. 2. ICs =100% ICU. | — | — | — | 4,08,512 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 340x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 240 sq.mm., 3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements etc. | — | — | — | 83,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 24,320 | |
| for details. | Item Breakup | — | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 12,600 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of 19mm size rigid conduit pipes of 2 mm thickness PVC pipe (ISI mark) concealed in wall with all required accessories conforming to IS 9537.3.1983 with its latest amendments , including masonry work and labour charges etc (For wiring points and wiring to switch boards) (for brick wall) along with accessories ( bends, elbow, deep junction boxes(3 way, 4 Way) etc Make:Miraj,Prince,Sudhakar,Kankai,Captain. | — | — | — | 6,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of 25mm casing and capping of ISI standard with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 9,600 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of 32mm x 12mm casing and capping of model : Glory type of M/s. Press Fit make or equivalent make with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 14,100 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of 20 mm casing and capping of ISI standard with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 2,534 | |
| for details. | Item Breakup | — | — | ||
| Supply and Laying of 25 mm FRPP corrugated Flexible conduit pipe as per standard specification. | — | — | — | 3,000 | |
| for details. | Item Breakup | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 67,210 | |
| for details. | Item Breakup | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 61,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) with latest amendements. | — | — | — | 72,380 | |
| for details. | Item Breakup | — | — | ||
| Supply, running, Connecting of 1 core 10 Sqmm PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendements. | — | — | — | 1,32,000 | |
| for details. | Item Breakup | — | — | ||
| Supply, running, Connecting of 1 core 4Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 11,400 | |
| for details. | Item Breakup | — | — | ||
| Supply, running, Connecting of 1 core 6Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 18,600 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 17,566.25 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 13,007.25 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessores complete. | — | — | — | 2,115 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessories complete. | — | — | — | 705 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of surface mounting plastic gang box-12 module of model no:JS 12 008 of GM make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,010.47 | |
| for details. | Item Breakup | — | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no: JS 08 006 of GM make or equivalent with 8 module cover plate (With support frame) of model no: PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 1,767.92 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of surface mounting plastic gang box-18 module of model no:JS 18 010 of GM make or its equivalent make with 18 module cover plate (With support frame) of model no:PK SB 18 010 - CASABLANCA of GM make or equivalent comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,684.22 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of surface mounting plastic gang box-4 module of model no:JS 04 003 of GM make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 1,040.27 | |
| for details. | Item Breakup | — | — | ||
| Supply and Fixing of metal flush box-3 module of model no: JM 03 002 of GM FOURFIVE make or its equivalent make with 3 module cover plate (With support frame) of model no: PK SB 03 003 - CASABLANCA of GM make or equivalent modular make including all accessories complete. | — | — | — | 1,700 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,230 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of metal flush box-6 module of model no:JIM 06 004 of GM FOURFIVE make or its equivalent with 6 module cover plate (With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,680 | |
| for details. | Item Breakup | — | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 3,600 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,170 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of metal flush box-18 module of model no:JM 18 010 of GM FOURFIVE make or its equivalent with 18 module cover plate (With support frame) of model no:PK SB 18 010 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,860 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 10A SP 1 Modular mini MCB conforming to IS:13947, C" Curve Model No.AB 1 111 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 7,003 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of 10W LED Bulk head fitting with Pressure die cast aluminum with opal diffuser with IP 65 Protection etc., complete., | — | — | — | 21,240 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of Recess / Surface mounting 18 W LED Square panel lighter (22.5*22.5*2.0CM) as per attached railway specification with all connected accessories. | — | — | — | 38,756.5 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extension wires etc for fixing) as per attached railway specification | — | — | — | 19,505 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 9W LED bulbs as per attached railway specification. | — | — | — | 3,936.25 | |
| for details. | Item Breakup | — | — | ||
| Supply erection testing and commissioning of 2 feet-8 w sensor based tube set (set includes sensor LED tube, Housing, 1 Mtr Cable ) wattage :16 W @max, 3w dim , CCT5700 K -6200 K Luminious flux : 1400-1600Lpm , Input Voltage : 100-240 V, 50 Hz Power factor > 0.9, SMD LED 3014:117 Pcs, BEAM angle :180, CRI>71. Ingress protection: IP20, Base : Aluminium alloy cover : Forged , PVC lamp holder : PC /ABS, Action distance : phase 3 to 6 m with 120.(2) Supply of Housing for fixing LED tube. Make : Nano, Bright solar, ECP lighting solutions, Procorp earntech pvt ltd, solar innovation & system. LED make Nichia, CREE, Osram, Seoulsemi, samsung, Brgelux. | — | — | — | 21,513.19 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 70,705.63 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 300m Heavy Duty Exhaust fans as per IS:2312:1967 or latest including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 56,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 R P M Exhaust fans including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 30,870 | |
| for details. | Item Breakup | — | — | ||
| Design, Supply, fixing, Commissioning and testing of LED sign Board 3D ACP Sheet of 4 mm ( Any Color) with MS Frame( 1"X3") fabrication structure, 3 mm sheet Acrylic Letters, As Trip shed Tiruchanur in 3 languages LED: Samsung LED including all connected accessories as per instruction of site engineer | — | — | — | 1,82,400 | |
| for details. | Item Breakup | — | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 3,951.96 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of "B' class GI pipe dia 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. | — | — | — | 20,251.92 | |
| for details. | Item Breakup | — | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GI pipe dia 50 mm | — | — | — | 1,938 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of Charcoal. | — | — | — | 6,037.2 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of Salt. | — | — | — | 4,174.8 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of pre fabricated RCC of size 0.55m X 0.55M(550mm) with wall thickness of0.125m(125mm) with height 0.3m (300mm) along with RCC(1:4:8) cover with .04m thickness(40mm)and funnel with ire mesh.(as per the Drg No.SC/E/SK-18/2004). | — | — | — | 10,438.32 | |
| for details. | Item Breakup | — | — | ||
| Transportation charges including loading &unloading of earthing arrangements system material to site / location | — | — | — | 2,982.6 | |
| for details. | Item Breakup | — | — | ||
| Supply erection, testing and commissioning of Maintenance free earthing similar to JEF ECOSAFE ,Pragati electrocom ltd, vijetha earthing etc., with earth electrode of low carbon steel rod of 3 mtrs long and 17.2mm dia with 250 Microns thick copper coating with 2 bags(each 10Kg) of LORESCO back fill compound with all necessary accessories complete according to IS 3093. | — | — | — | 57,252 | |
| for details. | Item Breakup | — | — | ||
| Supply, Transportation, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 3,67,472 | |
| for details. | Item Breakup | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 7,300 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of LED street light fittings of 70W with suitable driver with all connected materials as per attached railway specification. | — | — | — | 1,24,400 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of BLDC Air circulators 400 mm sweep with 1500 RPM 32W Equivalent to EFFICIO + model of Atomberg Make including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 96,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 120W LED Flood light fitting with all connected materials complete as per attached railway specification. | — | — | — | 2,55,145.41 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of GI pipe 'B' class of size 6"dia with all other connected accessories with coupling complete as desired by site engineer confirming to IS: 1239(Part-I)2004 with its latest amendments. | — | — | — | 33,750 | |
| for details. | Item Breakup | — | — | ||
| Supply of Metravi 3½ digit LCD display Auto ranging Digital Earth Resistance Meter equivalent to model no: ERT-1502 of metravi make or its equivalent. | — | — | — | 13,449 | |
| for details. | Item Breakup | — | — | ||
| Supply of Insulation Tester equivalent to model no: FLUKE-1507 of Fluke make or its equivalent. | — | — | — | 74,920 | |
| for details. | Item Breakup | — | — | ||
| Supply Of Occuswitch Surface Mounted Movement Detector Similar To Model No.Lrm1061/00 Of Make Philips. Makes: Philips, Crabtree, Havells. | — | — | — | 31,680 | |
| for details. | Item Breakup | — | — | ||
| Supply and installation of Analogue 24 Hrs timer model No. FM1/ Qurtz (cat no.J648B1) of L& T Make or its equivalent. | — | — | — | 45,600 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU | — | — | — | 11,560 | |
| for details. | Item Breakup | — | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. | — | — | — | 38,840 | |
| for details. | Item Breakup | — | — | ||
| Supply of ABS Plastic body air coolers of white color with dimension 655 x 627 x 475mm , operating on 230V, 1 ph air delivery 230m/hr 4 wat air deflector, 3 speed blower control with 1400 RPN, fan motor speed suitable 350 sq.ft. cooling area wit water level indicator having tank capacity of 51 litres along with suitable trolley. Make : Symphony, kenster, Bajaj, Crompton. | — | — | — | 25,456 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of SPN DB's, 8 way 8 module confirming to IEC:61439 IP 43 with metal door model no.507611 of legrand make or its equivalent make | — | — | — | 17,248 | |
| for details. | Item Breakup | — | — | ||
| Supply of DPX3 160+18 of 8 way DB of legrand cat no.5077 47 with metal door with provision for incomer of MCCB up to 160 Amps , bus bar of capacity 250A and outgoing for 18 Module with busbar din and neutral link with all necessary accessories complete or equivalent make. | — | — | — | 65,637.6 | |
| for details. | Item Breakup | — | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release ; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 of model no. 4200 95 of Legrand make or equivalent make with extended ROM , spreader links (2 sets). | — | — | — | 74,000 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of 63A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 16,632 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 22,752 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 22,720 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments with all connected accessories. | — | — | — | 10,601.6 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 5,520 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 5,520 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 5,520 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 20A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 5,520 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 32 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,300 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 34,979 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 33,978 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessories complete. | — | — | — | 41,610 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of DP MCB enclosures model no.5077 91 of legrand make or its equivalent. | — | — | — | 7,220 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of FP MCB enclosures model no.5077 93 of legrand make or its equivalent. | — | — | — | 9,220 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 16A, 2P+E - DP of model no.5078 60 of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 56,940 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of C curve DP MCBs of 16/20/32 A with all connected accessories . | — | — | — | 8,720 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of C curve FP MCBs of 32 A with all connected accessories. | — | — | — | 34,912 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 32A, 3P+E+ N -DP of model no. 5078 62 of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 1,11,168 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 63A, 3P+N+E -FP of model no.507864 of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 2,13,690 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .