Loading
Loading…
Loading…
Tender Value
₹5.5 L
EMD Value
Exempted
Closing Date
29 Oct 2026, 3:00 pm
Published by the portal on this tender, for queries and grievance redressal.
AIR COMPRESSOR FOR PLASMA CUTTING MACHINE
ANGLE PLATE ADJUSTABLE 250 X 150 X 175
ANVIL 24 SQ. INCHES WORKING AREA WITH STAND
BEARING DIFFERENT TYPES
BORING BAR INDEXABLE
CALIPER HERMACHRODITE.SPRING 15 CM
CALIPER INSIDE SPRING 6 INCH OR 15 CM
CALIPER OUTSIDE SPRING 6 INCH OR 15 CM
CAPS SCREWS M6
M8
M10
M12
CARBIDE WEAR BLOCK 1 MM-2 MM.
CARRIER FOR MOUNTING COMPONENTS
DRILL TWIST 1.5 MM TO 15 MM
DRILLS GUAGE STRAIGHT SHANK
CUT SECTION MODELS FOR HYDRAULIC COMPONENTS
CUT SECTION MODELS FOR PENUMATIC COMPONENTS
DIVIDER SPRING 6 INCH OR 15 CM
DOWEL PIN STRAIGHT DIA. 1 INCH LENGTH 4 INCH
DRIFT DRILL 200 MM HARDENED AND BLACK FINISH
STAKE GROOVING. 100 X 100 X 300 MM
STAKE HATCHET WITH LEG. 300 X 200 X 20 MM
FILE KNIFE EDGE SMOOTH.15O MM
FILE ROUND 2ND CUT 150 MM
FILE ROUND 2ND CUT 200 MM
FILE SQUARE 2ND CUT 250 MM
FILE SQUARE ROUGH 300 MM
FILE TRIANGULAR 2ND CUT 200 MM
MARKING OUT TABLE 90 X 60 X 90 CM
DRILL GAUGE 1
5 TO 12.5 MM IN STEPS OF 0
5 MM
DRILL TWIST ST. SHANK METRIC
DRILL TWIST TAPER SHANK 8 MM TO 20 MM BY 0.5 MM
FLANGE SLIP ON FORGED STEEL FLANGE 150NB
GASKET PACKING PTFE ROLL
GATE VALVE DIA FLANGED TYPE 150NB
GEAR SPUR OLD DAMAGED TO FIT 50 MM SHAFT DIA
HAMMER BALL PEIN 1 KG OR 2 LBS WITH HANDLE
HAMMER CHIPPING 0.25 KG
HAMMER CROSS PEIN 450 GRAMS OR 500 GRAMS OR 1 LB WITH HANDLE
HAMMER FLAT HEAD WITH HANDLE
JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION
KEY TO FIT SHAFT AND PULLEY
MARKING TABLE OR SURFACE PLATE TABLE
GLOBE VALVE CAST IRON FLANGED TYPE
LAPPING PLATE 6 INCH DIA
MALLET. DIA 100 MM X 150 MM
MULTI ANGLE MAGNETIC CLAMP SET
PIPE BENDER SPOOL TYPE WITH STAND
PLASTIC WELDING MACHINE WITH HOT AIR GUN
TEMP. DISPLAY
VARIABLE TEMP.
SWAGE BLOCK 5048
CAST IRON 16 X 16X 16 INCH
SWAGGING AND FLOORING TOOL KIT
POKER - 900 MM LONG
POWER CUTTER ELECTRICALLY OPERATED
POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM
PRESSURE REGULATOR CO2 GAS WITH FLOW METER
PROFILE GAUGES PLATE TYPE
PULLEYS FOR V-BELT OR FLAT BELT
PUNCH PRICK 6 INCH OR 15 CM
PNEUMATIC RIVET GUN
SCREW DRIVER INSULATED 6 INCH OR 150 MM
SCRIBER 150 MM KNURLED CENTER POSITION
SHEAR TINMANS 300 MM
SHEAR HAND CAPACITY TO CUT 6 MM THICK SHEET AND FLAT
SNIP BENT 250 MM
SNIP STRAIGHT 300MM
STANDARD TAP SCREWS
STOP COCK 25NB 2 WAY
THREADED END
TABLE FOR GAS CUTTING SUITABLE SIZE
TIN SMITHS BENCH FOLDER 600 X 1.6 MM
VERNIER CALIPER SET 150 INSIDE AND OUTSIDE
WASHER
CLUTCH
KEYS
JIB
COTTER AND CIRCLIP
9964328
GEM/2026/B/8098924
Two Packet Bid
AIR COMPRESSOR FOR PLASMA CUTTING MACHINE
Junagadh, Gujarat
Group wise evaluation
BOQ
6 documents required · 6 mandatory
₹2 L
₹11 L
10%
IMC OF ITI VERAVAL, ITI – VERAVAL, BEHIND SAIBABA TEMPLE, DARI ROAD, VERAVAL, DISTRICT – GIR SOMNATH, GUJARAT 362265, (Imc Of Iti Veraval)
Exempted
Yes
8 Oct 2026
8 Oct 2026
30 Oct 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | AIR COMPRESSOR FOR PLASMA CUTTING MACHINE | AIR COMPRESSOR FOR PLASMA CUTTING MACHINE | 1 | pieces | VERAVAL_CON | 15 |
| 2 | ANGLE PLATE ADJUSTABLE 250 X 150 X 175 | ANGLE PLATE ADJUSTABLE 250 X 150 X 175 | 1 | pieces | VERAVAL_CON | 15 |
| 3 | ANVIL 24 SQ. INCHES WORKING AREA WITH STAND | ANVIL 24 SQ. INCHES WORKING AREA WITH STAND | 1 | pieces | VERAVAL_CON | 15 |
| 4 | BEARING DIFFERENT TYPES | EACH TYPE OF DIAMETER 25MM (MIN.) | 1 | pieces | VERAVAL_CON | 15 |
| 5 | BORING BAR INDEXABLE | WITH INSERT 1 INCH SHANK | 4 | pieces | VERAVAL_CON | 15 |
| 6 | CALIPER HERMACHRODITE.SPRING 15 CM | CALIPER HERMACHRODITE.SPRING 15 CM | 3 | pieces | VERAVAL_CON | 15 |
| 7 | CALIPER INSIDE SPRING 6 INCH OR 15 CM | CALIPER INSIDE SPRING 6 INCH OR 15 CM | 4 | pieces | VERAVAL_CON | 15 |
| 8 | CALIPER OUTSIDE SPRING 6 INCH OR 15 CM | CALIPER OUTSIDE SPRING 6 INCH OR 15 CM | 2 | pieces | VERAVAL_CON | 15 |
| 9 | CAPS SCREWS M6, M8, M10, M12 | CAPS SCREWS M6, M8, M10, M12 | 2 | pieces | VERAVAL_CON | 15 |
| 10 | CARBIDE WEAR BLOCK 1 MM-2 MM. | CARBIDE WEAR BLOCK 1 MM-2 MM. | 1 | pieces | VERAVAL_CON | 15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_9964328.pdf
GEM_BID • 0.54 MB
boq_item_sample_file_fabrication_2026-09-29-16-57-07_a9e3538eaf41d2e3f2e29cc865216f2b.pdf
BOQ • 0.24 MB
boq_item_sample_file_fabrication_2026-09-29-16-57-07_4f4c0cabf682ddb5e5427e4af08d210c.csv
BOQ • 0.01 MB
FABRI_SPEC_b740d80d-f584-4104-b7371791286045325_VERAVAL_CON.pdf
GEM_SPEC • 7.70 MB
gtc.pdf
GEM_OTHER • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .